Lack of support & answers for Twist 7705... any he...

There is a serious lack of support for Twist 7705 users. I'm trying to do a simple transfer of information (some music and pictures) from my computer to my phone and have had terrible time!
The memory card "says" it formats, yet when I check the card (using a universal card reader) there are no folders (gallery folders) as should be created when formatted
There are no USB cables for this phone, not even on the Nokia website. And buying a cable from another company is useless because there are no drivers to allow it's use. I purchased a micro usb cable and wasted my money.
When searching this site, for drivers, it says to use PC SUITE, then asks you to choose your phone, my model isn't suported on the software.
This company is seriously lacking in the technical department. You shouldn't release a phone, advertise it's abilities, knowing full well you haven't provided the tools to use the phone to it's fullest.
I've been trying to do this since November 1st when I bought the phone. Absolutely ridiculous and frustrating.

Actually figured it out on my own..
Connect USB cable to USB port on PC, connect other end into phone
Go to Menu>Settings&Tools>Tools>USB Mass Storage, then click OK
Your PC will install it's own USB Mass Storage Device driver, wait a min or two and a new drive letter will be visible in your "My Computer" window
My drive letter was G:\ and it said "Removable Disk (G: )"
Double click on the new "Removable Disk" icon and right click inside the window and select New>Folder 
Name this folder "my_music"  (lower case, and include the underscore ( _ ) 
Drag and drop all your music files into this folder
Next, push "Cancel" on the Nokia and go to Menu>Media Center>Music & Tones>My Music
press the right softkey for "Options" and select 1. Scan memory card for new music
Hit OK and now your music will be visible and playable from the phone!
I haven't messed with downloading pictures to the phone, but I would assume that creating a "my_pictures" folder might work.  Just a guess
Nokia needs to include a more helpful manual with this product if they aren't offering online support or FAQ's for this model
Message Edited by meatbawl on 23-Nov-2009 12:46 AM

Similar Messages

  • HT201412 iphone won't power on support answer doesn't help. any suggestions

    Iphone 5 won't power on and shuts down by self. I have updated operating system fully charged the battery and restored the phone
    all things suggested by on line support. Anyone have any suggestions

    If no change after trying all things included with on-line support, there is nothing else to try. The iPhone includes a one year warranty.
    Call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • HT5312 i am in Iraq right now and i cannot make any schedule for having a call with your support team , however, i forgot the answer for security questions , and also previously i have not summited a rescue Email address is there any way to reset my accou

    i am in Iraq right now and i cannot make any schedule for having a call with your support team , however, i forgot the answer for security questions , and also previously i have not summited a rescue Email address is there any way to reset my account?

    Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
    As to whether you can work with Apple via email on this issue I can't say for sure, but you can contact them via this web page:
    http://www.apple.com/support/appleid/contact/
    and see if they can help. It's mostly going to be an issue of you being able to prove to them that you are the account owner.
    Regards.

  • DirectTV lack of support for Apple TV channels

    Is there a common site to file a complaint with DirectTV over the lack of support for AppleTV channels?  Or do I have to go to each channels site?
    Thanks for any help!
    Regards,
    -Brian

    Welcome to the Apple community.
    The Apple TV 1 is very much different than the later Apple TV is. For a start it doesn't support homesharing or airplay. It doesn't have many features of the later Apple TV is such as iTunes march, MLB, WSJ, photo stream and others. Additionally, it does not support re-downloading of TV shows and movies (US only).
    It's also plays lower resolution video only.

  • M57 and any graphics cards - total lack of support - and do not buy

    well just been in touch with support to find out if a new bios is coming out to support graphics cards that most people have. (HD5450 nothign over powerful) Sorry not suported in any way, only 3 crappy cards are supported officially. Basically told to sling hook Remind me not to buy IBM again from the total lack of support or updates.PCI-E standard - not if your IBM 

     WINNER WINNER CHICKEN DINNER!!!!!!!! I have eight (8) of the ThinkCenter M57 6072 HDU running BIOS 2RKT64AUS.  I have E8400s in a couple of them @ 3.0 GHz from the stock E7200 2.66GHz.  Paid $65 each of the M57s at an online goverment surplus site. The machines are used by our kids for general homework and League of Legends, Warcraft, etc. The onboard graphics would not run these games. Purchased a ASUS Radeon HD 5450 Silent 1GB DDR3 64BIT PCI-E DVI-I HDMI HDCP Passive Low Profile Video Card for about $35.  ***FAILED TO POST***. Purchased a VGA GIGABYTE|GV-N640D5-1GL RTL  (NewEgg or NCIX) and it installed, posted, booted, and graphically scored 7.1 on Windows Experience Index and over 1300 on  Perfomance Test 8.0 from Passmark Software.  Card cost $100 (not on sale) Also purchased a pair of non-matching GT630s (~$65-100) and a GT610 (~$55)  to try along with the GT640 but when they all came I started with the GT640 and never looked back.  RMAd the others and bought six(6) more GT640s; only six(6) because I killed one of the motherboards updating the BIOS with the E8400 installed!!  Only Flash with the correct CPU in I guess. I also intalled a ASUS Xonar DG 5.1 Channel PCI Sound Card 24BIT Dolby Digital DTS 105DB SNR W/ Headphone AMP for $35 and it went in the available PCI slot and now these machines rip and scream. The slowest part of these machines is the memory and the HDD.  Easy to put in a nice SSD if someone wanted.  And I might experiment with the E8400 machines with some faster memory. These machines are so well built as far as the modular little cases go.  Cheers all and GOOD LUCK!    

  • Support boards for developing dashboard widgets?  any response, please??

    i don't mean to be a noodge, but 4 days ago i posted a simple request asking if i could get support here for some questions i had as regards some snags i ran into making dashboard widgets. while other people's questions about ruby/rails, c and objective c and even powerpoint (shouldn't that be in a microsquish support forum??) have been responded to.
    all i want to know is, can anyone help me here or at least point me to other support boards that offer help for those developing dashboard widgets? is that too much to ask?
    my original message i posted 4 days ago is below. i would appreciate response from anyone, please. i can't believe i'm the only person out here seeking support for my *.html, *.css and javascript files for dashboard widgets.
    hi,
    i'm trying my hand at the most rudimentary of developing for mac os x - developing a dashboard widget, using html, css & javascript.
    i'm trying to make a simple widget that uses the real audio plug-in in the system (if you downloaded real player) to play a local portland, oregon fm classical radio station, kbps-fm 89.9 (www.allclassical.org).
    i'm running into some snags both in making the "i" info button flip the thing around (it was working before, but since i added in the code that makes the real player plug in work, no matter where i place the position of the "i" flipper, it doesn't show up), and in the graphics i'm trying to create for the widget.
    should i seek help here? are there better boards/forums for mac os x dashboard widget creation i can go to, and if so, can anyone direct me there? i know about adc, and am a (free) member, but they don't have discussion boards there and i don't want to pay oodles in tech support just to get some basic javascript and css questions handled.
    if anyone could please direct me to where i can ask these questions or help me out, please let me know. thanx.
    -- faddah yuetsu wolf
    portland, oregon
    [email protected]

    Hi
    i don't mean to be a noodge, but 4 days ago i posted
    a simple request asking if i could get support here
    for some questions i had as regards some snags i ran
    into making dashboard widgets. while other people's
    questions about ruby/rails, c and objective c and
    even powerpoint (shouldn't that be in a microsquish
    support forum??) have been responded to.
    You shouldn't take the lack of response as a personal insult The nature of these forums (fora?) is that people respond to those messages where they can help and don't respond when they can't help. FWIW I've got two unresolved questions dating back to Mar 17th!
    In my opinion, the Developer forums would be absolutely ideal and on-topic places to discuss Widget development..... but it looks like very few experienced Widget developers hang out here, so any questions would most likely go unanswered. My own skill area in limited to Java so I can't help out with widgets. No doubt the other forum regulars are in a similar position.
    Bob

  • Lack of support for Canon G7 and G9. Alternatives?

    I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
    I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
    What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
    Best regards,
    Kjell Are Refsvik

    I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
    I don't know much about that cameras, but you may want to investigate.
    Message was edited by: rkkwan
    Message was edited by: rkkwan

  • Lack of support for rosetta in Lion

    with the lack of support in Lion for Rosetta (so the rumours go) how am I fixed with my epson 2400 scanner an HP 5552 printer?

    You should look at the current drivers available for both devices, if they're supported in Snow Leopard upgrading to Lion should probably will not affect them however we won't know for sure until Lion is released. You can find the devices currently supported at:
    http://support.apple.com/kb/HT3669
    BTW I don't think Rosetta has anything to do with drivers for scanners and printers. If you are using Epson and HP software that was written for PPC based computers then you may have a valid concern. You can always voice your concern at www.apple.com/feedback.
    Roger

  • LACK OF SUPPORT FROM SKYPE For crash

    Total lack of support and no meaningful response from Skype.com forum.
    2 months without being able to use Skype and hours nearly days lost for uninstall reinstall or initialize the phone all that only due to a faulty sensor problem. SKYPE MUST ADD a  setting to disable the proximity sensor (like the existing audio for calls from the phone) . IT IS A MINIMUM!

    Hi and welcome to the Skype Community,
    Just to set the right expectations: The community is not a direct support channel with Skype customer service agents. You will find fellow Skype users like you replying as well as moderators, power users or Skype staff like developers or quality engineers. Most of the time anyone from these groups can help you finding an answer to your problem, otherwise please contact Skype customer service.
    To help with your issue it'll be most helpful if you supply the information outlined here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Can Apple comment on their lack of support for burning CD-TEXT?

    Can Apple comment on their lack of support for burning CD-TEXT?
    I've been getting the runaround from the support people. They said to resolve my issue check out the following kb articles. The articles were aimed at giving me more information about ID3 tags and formats that I care about. I just want my burnt cd's to work in my CD-TEXT capable cd player.
    I've done this using alternate software packages so I know my hardware supports it. I'm really looking for a complete solution for myself (techie) and my wife (non-Techie) to use and make us both happy. I have to admit, this really bothers me.
    I know I'm not the only person asking about this. Please add the support for CD-TEXT to I-Tunes.
    Thanks
      Windows XP  
      Windows XP  

    Apple people don't comment here, it's a user to user forum.
    But you've got me interested. CD-TEXT, what is it? Should I just look it up in wikipedia or do you have a better explanation of what it is you're after?

  • Colors Lack of Support for Nvidia!

    I switched to Mac for the sole purpose of using "Final Touch"..shortly after it was purchased and is now Color. I bought the new studio package and loaded it all on my Workstation. Low and behold...no support for Firewire out!!...so I will have to buy an AJA earlier then planned...and I can only get 8 bit color renderning depth in settings regardless of footage quality, bit depth, resolution, or codec. My system is a Dual Quad Core 3GHZ so 8 CPUS "Octo Mac" with 9GB of RAM and 2 TB RAID storage with a Nvidia Quadro 4500! It's rather frustrating that the highest end system apple can make is crippled in Color and I have to get a lesser system (ATI card) to make it run optimally. Any answers? I purchased the Quadro because I work in Maya...but now I think I will have to save the $1400 difference and get the ATI card so I can work in a higher bit depth , and afford to purchase a High end AJA card for output. Any ideas or answers?

    Hello,
    i posted another thread about the limitation of 8bit color depth and no realtime playback and found out that it was the same problem. We had a nvidia card installed. I just installed the app on a 8core intel with ati x1900 and it works impressivley well. Perfect playback and performance. We are putting primary, 3 secondaries with super soft gradients and a pan and scan plus output correction and the systems delivers still 22fps in 2k dpx sequences. Quite amazing. But yes, nvidia gave us 8fps with an uncorrected image.
    Get the x1900 it will make you happy.

  • I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version

    I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.

    Hi Syednz,
    If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Apple Support: Boot Camp Support Software 4.0.4326
    http://support.apple.com/kb/DL1636
    Regards,
    - Brenden

  • HT2589 I forgot the answers for the security questions, so i'm not able to purchase any thing from apple store. What can i do?

    I forgot the answers for the security questions, so i'm not able to purchase any thing from apple store. What can i do?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • HT1349 I forgot the answer to my security questions and I don't have a rescue email, whenever I receive a call from apple support it disconnects, is there any other way of resetting security questions?

    I forgot the answer to my security questions and I don't have a rescue email, whenever I receive a call from apple support it disconnects, is there any other way of resetting security questions?

    From a Kappy  post
    The Best Alternatives for Security Questions and Rescue Mail
    1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    An alternative to using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.
    Just wait for Apple/iTunes to reply

  • I ran into the follow error after trying to upgrade to the newest version of ITunes. "An application has made an attempt to load C runtime library incorrectly" I was direct to  "Contact the applications support team for more information" Can any one help

    I ran into a problem with iTunes after I upgraded to the latest IOS. I'm recieving the followig error messages, any help would be appriciated.
    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Programe C:\Program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.

    Hello mobleymarvin,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Database refresh from standby database

    All, OS : Sun version : 11.1.0.7 I'm doing database refresh using stand by database datafiles in different server. 1)Disabled Data guard broker in standby database . 2)Copied all datafiles in mount stage to target server (different server) 3)created

  • Can we mainatain target system such as objects not modiefied by transports

    is it possible to maintain setting in SAP BW system (especially in BWQ and BWP system ) so that objects don't get modified even through tranports?.  to say in other words, can i lock the sytem so that, it wont accept anychanges in the object in the t

  • Any http/telnet API to activate camera to start/stop recording?

    Hi all, The function is involved in a IoE(Internet of Everything) project for customer. A. The action of 'start to record': will be triggered by event, such as when a sensor has detected some smoke in one room. The platform will activate camera by se

  • REM Back Flush

    hi,          When i am trying to backflush in rem system thowing error No active standard cost estimates exist help me to solve this issue Regards Prakash B.

  • Oracle AS cluster on single windows machine.

    Hello All, would appreciate your input here. I have two OAS 10g r2 (say node1 and node2) on my windows machine. I deployed my application on node1 and added node1 to a cluster. Then i added node2 to the cluster and the OC4J instance in node1 was dupl