LACK OF SUPPORT CREATIVE

<span class="long_text">I have a Sound Blaster Audigy 2 card platinun ex and I decide to install the new Windows 7 but to my surprise a poor creative gives 2. for this operating system and although there are alternati'ves I always like to install the original drivers that creative but is not interested. ... only want to sell their new products but of course I spent a few years back the same, new operating system and change card does not see it fair to change will change but not a creative there are options other manufacturers to present day for their products and removed all drivers with original posivilidades ... I hope it will spread much his politics so special

we have a few problems
- creative support sucks, we all know that.
2 - why we buy their prodcuts? when they works they rulezzzzz!!!
3 - even after 5 years some SB sound cards are far better than integrated solutions but they have reach EOL (end-of-life).

Similar Messages

Xmod Issues & lack of support

!Xmod Issues & lack of support? After trading FOUR emails with Creative Tech Support to find out why my USB powered Altec Lansing speakers do not work with my Xmod, and asking for possible solutions (the only one being I have to buy ANOTHER pair of non-USB powered speakers), I finally received this reply...
"Thank you for replying to Creative Technical Support.
With regards to your inquiry, you do not need a power adapter for the
Xmod cause it is only USB powered. Meanwhile, you can connect your Xmod
to a powered speaker system.
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service."
Wow, not only can they NOT answer my question, but they don't even know their own product!? If it is ONLY USB POWERED, then why are so many people complaining in the forum about having to buy yet another $40 a/c adapter to meet their needs. I keep reading over and over about not using the forum for tech support issues, and instead,?that you should direct specific tech support issues to the Support re
ps.
Good luck on THAT one!

Hear, hear...
Since I don't see the Xmod anywhere on Creative's product list, well, should I...conclude it's now an orphan?
Consider also this response when I got desperate enough to actually try the 'knowledgebase': "There are currently no Knowledgebase Solutions for?Xmod Wireless" - how can I not conclude that there simply IS no meaningful tech supportI mean...REALLYNothingIndeed, it does seem like an orphan - but if there ever was any online documentation worthy of this engineering effort, why would it have been removed?
Mine came with LOTS of plastic bags and unnecessary packaging, but as far as paperwork goes, was conspicuously lacking in anything other than a barebones "quickstart"-type guide: ?just one folded sheet in each box (trans & receiver), with half of even that tiny amount of info devoted to languages other than English. ?Assembly was self-explanatory and simple - but that's all these silly little guides cover! ?Use of most features was absolutely baffling - it's like I am missing some software that should have come with it, but didn't, and there's no mention of it in the scant guides I have. ?Remotes have buttons for features like "menu," "display," etc but even with the USB connection in place and the device recognized, there doesn't seem to be any downloading of software that would make such features functional. ?It'll play my music from my player software, but there sure isn't any other usable remote or even wired control - other than the power button.
Update: ?OK, there's a little more info available... but that's only if you find the pdf on the Creative website (and your pdf software is working...which mine wasn't) but still, I emphasize, it's only scant info. ?
I at least found the audio setup instructions for use on my PC's Control Panel, but:
1) ?My standard (Logitech) wireless mouse now works like sh*t (totally unacceptable now, unless I disconnect the Xmod USB)...so what, do I have to go back to a corded mouse now?
2) ?A number of remote functions don't seem to work right, or at all. ?The FAQ on the online pdf includes this gem:
Q: ?Why can't I access my media player?s functions with the remote control?
A: ?With some media players, some functions are not accessible via the XmodWireless remote control.
Would it have blown your testing budget to have maybe LISTED some of the players that DO and DON'T work right with this deviceOr do I have to figure this out by trial-and-errorI currently prefer "MediaMonkey," but it seems as if a bunch of those remote functions don't work with it. ?Will I ever know what the "menu" button is supposed to do?

Lack of support for Canon G7 and G9. Alternatives?

I am really disappointed about the lack of support for the Canon G9, and looking at the list of compatible cameras (http://docs.info.apple.com/article.html?artnum=306835) I notice that Canon G7 - even if it does not have a RAW format, is not supported either.
I am thinking that the purchase of the G9 may have been premature and that I may need to sell it and get another cam that is supported by Apple/Aperture.
What would you guys do? Is there a cam out there similar to the G9 at the moment that has a Apple-supported RAW format?
Best regards,
Kjell Are Refsvik

I think the camera closest to the G9 that has RAW support from Apple are the Panasonic DMC-LX2/Leica D-Lux 3 twins. Don't know where you are, but in the US, the Panasonic costs about $400. 10MP, 28-112mm (35mm equivalent) Leica lens, very compact body, and RAW output. The Leica costs $599, and has that classic look.
I don't know much about that cameras, but you may want to investigate.
Message was edited by: rkkwan
Message was edited by: rkkwan

Business Preorder - Lack of Support

I wanted to express my disappointment with the lack of support from Verizon. I decided to take part in the iPhone 6 preorder Friday Morning. I got my order in at 2:14am Central or 12:14 pacific. This was only 14 min into the preorder. I took screen captures of the summary page and of the status of the model when I placed the order. For some reason there was an error with my order. This error had nothing to do with my side but rather Verizon. Our account page indicates a 9/19 delivery but at 12:57pm on Friday we received an email saying that the date was 10/21. I have been trying to get an answer since Friday afternoon and this was the response that I got back. I can understand making mistakes but the unwillingness to make things right is what frustrates me the most.
As you can see from this screen shot the order was placed 14min into the Preorder.
After the order was placed I took a screen shout of the inventory page.

Hi Christine,
but in the BC case you need to remember one more thing...
JDK 1.3
from java.sun.com
J2SE 1.3.1 has begun the Sun End of Life (EOL) process. The EOL transition period is from Oct 25, 2004 until the General Availability (GA) of the next Java version, Java SE 6 (code name Mustang).
so even if SAP will provide any updates it may not
work with unsupported java right ?
and java SE 6 will probably be sooner than
end of BC support I believe
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

DirectTV lack of support for Apple TV channels

Is there a common site to file a complaint with DirectTV over the lack of support for AppleTV channels? Or do I have to go to each channels site?
Thanks for any help!
Regards,
-Brian

Welcome to the Apple community.
The Apple TV 1 is very much different than the later Apple TV is. For a start it doesn't support homesharing or airplay. It doesn't have many features of the later Apple TV is such as iTunes march, MLB, WSJ, photo stream and others. Additionally, it does not support re-downloading of TV shows and movies (US only).
It's also plays lower resolution video only.

Lack of support for rosetta in Lion

with the lack of support in Lion for Rosetta (so the rumours go) how am I fixed with my epson 2400 scanner an HP 5552 printer?

You should look at the current drivers available for both devices, if they're supported in Snow Leopard upgrading to Lion should probably will not affect them however we won't know for sure until Lion is released. You can find the devices currently supported at:
http://support.apple.com/kb/HT3669
BTW I don't think Rosetta has anything to do with drivers for scanners and printers. If you are using Epson and HP software that was written for PPC based computers then you may have a valid concern. You can always voice your concern at www.apple.com/feedback.
Roger

LACK OF SUPPORT FROM SKYPE For crash

Total lack of support and no meaningful response from Skype.com forum.
2 months without being able to use Skype and hours nearly days lost for uninstall reinstall or initialize the phone all that only due to a faulty sensor problem. SKYPE MUST ADD a setting to disable the proximity sensor (like the existing audio for calls from the phone) . IT IS A MINIMUM!

Hi and welcome to the Skype Community,
Just to set the right expectations: The community is not a direct support channel with Skype customer service agents. You will find fellow Skype users like you replying as well as moderators, power users or Skype staff like developers or quality engineers. Most of the time anyone from these groups can help you finding an answer to your problem, otherwise please contact Skype customer service.
To help with your issue it'll be most helpful if you supply the information outlined here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Lack of support & answers for Twist 7705... any he...

There is a serious lack of support for Twist 7705 users. I'm trying to do a simple transfer of information (some music and pictures) from my computer to my phone and have had terrible time!
The memory card "says" it formats, yet when I check the card (using a universal card reader) there are no folders (gallery folders) as should be created when formatted
There are no USB cables for this phone, not even on the Nokia website. And buying a cable from another company is useless because there are no drivers to allow it's use. I purchased a micro usb cable and wasted my money.
When searching this site, for drivers, it says to use PC SUITE, then asks you to choose your phone, my model isn't suported on the software.
This company is seriously lacking in the technical department. You shouldn't release a phone, advertise it's abilities, knowing full well you haven't provided the tools to use the phone to it's fullest.
I've been trying to do this since November 1st when I bought the phone. Absolutely ridiculous and frustrating.

Actually figured it out on my own..
Connect USB cable to USB port on PC, connect other end into phone
Go to Menu>Settings&Tools>Tools>USB Mass Storage, then click OK
Your PC will install it's own USB Mass Storage Device driver, wait a min or two and a new drive letter will be visible in your "My Computer" window
My drive letter was G:\ and it said "Removable Disk (G: )"
Double click on the new "Removable Disk" icon and right click inside the window and select New>Folder
Name this folder "my_music" (lower case, and include the underscore ( _ )
Drag and drop all your music files into this folder
Next, push "Cancel" on the Nokia and go to Menu>Media Center>Music & Tones>My Music
press the right softkey for "Options" and select 1. Scan memory card for new music
Hit OK and now your music will be visible and playable from the phone!
I haven't messed with downloading pictures to the phone, but I would assume that creating a "my_pictures" folder might work. Just a guess
Nokia needs to include a more helpful manual with this product if they aren't offering online support or FAQ's for this model
Message Edited by meatbawl on 23-Nov-2009 12:46 AM

Can Apple comment on their lack of support for burning CD-TEXT?

Can Apple comment on their lack of support for burning CD-TEXT?
I've been getting the runaround from the support people. They said to resolve my issue check out the following kb articles. The articles were aimed at giving me more information about ID3 tags and formats that I care about. I just want my burnt cd's to work in my CD-TEXT capable cd player.
I've done this using alternate software packages so I know my hardware supports it. I'm really looking for a complete solution for myself (techie) and my wife (non-Techie) to use and make us both happy. I have to admit, this really bothers me.
I know I'm not the only person asking about this. Please add the support for CD-TEXT to I-Tunes.
Thanks
Windows XP
Windows XP

Apple people don't comment here, it's a user to user forum.
But you've got me interested. CD-TEXT, what is it? Should I just look it up in wikipedia or do you have a better explanation of what it is you're after?

Icon user here chiming in on lack of support from Verizon

As everyone else, I've been waiting patiently for Verizon to release the 8.1/Cyan update for the Lumia Icon since JULY. I've shared the same frustrations that have been expressed on this forum countless times over the past months, but never felt the need to chime in until now.
I've been a Verizon customer for around 5 years, starting with a Windows Mobile Omnia 2 and later going through an HTC Trophy, a Lumia 928 and now the Icon (since March). In all cases save for the 928, Verizon's support has been anywhere from non-existent to downright ignorant (Omnia 2 suffered from countless issues network connectivity-wise, which Verizon never managed to solve, Trophy never received the WP 7.8 update, and the Icon not only has been waiting for the 8.1/Cyan update for several months, but also got discontinued in about half a year after release. 928 at least received the Amber update in a timely fashion, but of course has also suffered from the same lack of support that the Icon owners have gone through.) To add insult to injury, Verizon has also offered far fewer options for Windows Phones over the years than other carriers have.
Despite all of these issues over the years, I always justified staying with Verizon due to my perception that their coverage was unparalleled. As I'm in the military and thus move around a lot, this was very important to me. So much so that I even chose to upgrade to the Icon instead of switching to AT&T despite currently being stationed in WV where Verizon doesn't even operate it's own network, causing me to have serious connectivity issues all over the place. I figured I'm only gonna be in the area for so long, and when I leave for some other assignment, I'd be glad I stayed with the superior network.
Well, times have changed. First of all, when I first signed up for Verizon, AT&T's network (at least in the areas where I worked at the time) had a very poor reputation. Now, five years later, I've been hearing nothing but good things about them. Supposedly Verizon's network is on average a bit faster, but coverage and reliability-wise they seem to be very close. As long as I can get a decent signal wherever I go, I really don't care if my speeds are a little bit slower. I'll use my computer and ISP for anything that requires high speeds.
I was still willing to give Verizon a pass on the delays with Cyan as long as they released it by the end of the year, but my eyes were opened by two events, one of which just happened today. First, was the very abrupt discontinuation of the Icon, THE flagship Windows Phone device. Then today I walked into the Verizon corporate store in Petaluma, CA (currently training in the nearby area) asking if they had any information about the timeline for the Cyan update. The guy at first seemed friendly and went into the back to talk to someone with more knowledge on the matter. He then came back and told me the most far-fetched line yet. He said Microsoft was discontinuing the Lumia phones and going forward was only going to provide updates to the HTC and Samsung models. Whatever the case, Verizon was not responsible for the updates. I couldn't help but laugh at the absurdity of this nonsense, and told him No, Microsoft bought Nokia, and the Lumia devices were simply being rebranded as Microsoft. In no way shape or form are they being discontinued. Well, he must have been insulted by getting corrected, because he then said to me and I quote: "I don't know, why don't you just go read about it on the internet then.", and began to walk away.
I have come to realize I've been putting up with Verizon's ignorance and lack of support of the Windows Phone platform for half a decade because of an illusion of supposedly better service! After all this time they haven't changed their ways and show now signs of changing. Sticking with Verizon is only going to result in more headaches, delays and disappointments. After my encounter with the representative in the previous paragraph, I stopped him and asked to talk to the manager, because I wanted to make sure I was getting the most authoritative answer I could get to my next question. I wanted to confirm that as a Verizon Edge customer, if I paid off my device in full, I could leave their network for another provider at any time (somehow I overlooked this fact when I signed up in March. I chose Edge simply to give me more flexibility with upgrading my phone), and she confirmed this was the case.
So to conclude, I have decided to wait until the end of the year. If by then Verizon has not at the very least provided a firm date for my Lumia Icon to receive the Denim (yes, Denim. After all this time, only updating to Cyan is not going to redeem them in my eyes) update, I will pay off my Icon, and switch to AT&T. Quite frankly, even then I think there is a high chance I will end up switching after my phone has been paid off in the normal timeline, because I feel there is no basis for me to trust Verizon with behaving any better in the future, but if they want to have any hope of me staying on as a customer, I better have a firm date for the Denim update by 2359 on 31DEC2014. I can understand delays, but I will not stand for Verizon's lack of communication to their customers. In the end I will vote with my wallet.

Here you go I found an ONLINE copy from MS. I highlighted the subsection in red. Just that section right there does not guarantee you will have a warranty as long as the DP is installed.
7. Disclaimer of warranties
General. To the maximum extent permitted by law, the Deliverables are provided to you “as is” and with all faults. You bear the entire risk of using the Deliverables. Except as provided herein, Microsoft, on behalf of itself, its licensors and its suppliers, expressly disclaims all other express, implied, or statutory warranties. This includes the warranties of merchantability, fitness for a particular purpose, title and non-infringement. Microsoft, its licensors and its suppliers do not warrant that the Deliverables are error free or that operation of the Windows Phones will be secure or uninterrupted.
INSTALLING WINDOWS PHONE SOFTWARE ON A WINDOWS PHONE THAT YOU OWN.
BY INSTALLING WINDOWS PHONE SOFTWARE UPDATES AVAILABLE THROUGH THIS PROGRAM, THE FOLLOWING MAY OCCUR:
YOU WILL LIKELY VOID ANY APPLICABLE OEM, ODM OR MOBILE OPERATOR WARRANTY FOR THAT PHONE.
YOU MAY CAUSE IRREPARABLE HARM TO YOUR PHONE, INCLUDING LOSS OF ALL DATA. DATA INCLUDES SMS MESSAGES, GAME INFORMATION AND APPLICATION INFORMATION, AS WELL AS MUSIC, VIDEOS, PHOTOS AND EMAIL. ADDITIONAL DATA NOT LISTED HERE MAY ALSO BE LOST.
YOU AGREE TO WAIVE ANY SUPPORT FOR YOUR WINDOWS PHONE FROM THE MANUFACTURER OF YOUR WINDOWS PHONE AND MOBILE OPERATOR OF THE NETWORK THAT YOUR WINDOWS PHONE WORKS ON. YOU AGREE TO WAIVE ANY RIGHT TO RETURN YOUR WINDOWS PHONE TO YOUR APPLICABLE OEM, ODM OR MOBILE OPERATOR.

[svn:fx-trunk] 11454: ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items .

Revision: 11454
Author:   [email protected]
Date:     2009-11-04 18:17:33 -0800 (Wed, 04 Nov 2009)
Log Message:
ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

M57 and any graphics cards - total lack of support - and do not buy

well just been in touch with support to find out if a new bios is coming out to support graphics cards that most people have. (HD5450 nothign over powerful) Sorry not suported in any way, only 3 crappy cards are supported officially. Basically told to sling hook Remind me not to buy IBM again from the total lack of support or updates.PCI-E standard - not if your IBM

WINNER WINNER CHICKEN DINNER!!!!!!!! I have eight (8) of the ThinkCenter M57 6072 HDU running BIOS 2RKT64AUS. I have E8400s in a couple of them @ 3.0 GHz from the stock E7200 2.66GHz. Paid $65 each of the M57s at an online goverment surplus site. The machines are used by our kids for general homework and League of Legends, Warcraft, etc. The onboard graphics would not run these games. Purchased a ASUS Radeon HD 5450 Silent 1GB DDR3 64BIT PCI-E DVI-I HDMI HDCP Passive Low Profile Video Card for about $35. ***FAILED TO POST***. Purchased a VGA GIGABYTE|GV-N640D5-1GL RTL (NewEgg or NCIX) and it installed, posted, booted, and graphically scored 7.1 on Windows Experience Index and over 1300 on Perfomance Test 8.0 from Passmark Software. Card cost $100 (not on sale) Also purchased a pair of non-matching GT630s (~$65-100) and a GT610 (~$55) to try along with the GT640 but when they all came I started with the GT640 and never looked back. RMAd the others and bought six(6) more GT640s; only six(6) because I killed one of the motherboards updating the BIOS with the E8400 installed!! Only Flash with the correct CPU in I guess. I also intalled a ASUS Xonar DG 5.1 Channel PCI Sound Card 24BIT Dolby Digital DTS 105DB SNR W/ Headphone AMP for $35 and it went in the available PCI slot and now these machines rip and scream. The slowest part of these machines is the memory and the HDD. Easy to put in a nice SSD if someone wanted. And I might experiment with the E8400 machines with some faster memory. These machines are so well built as far as the modular little cases go. Cheers all and GOOD LUCK!

SQL Azure Support Team And Lack of Support.

Hello,
I purchased an Azure Support Plan seeking help as a
Developer. For more than two Month the Azure SQL Engineers failed to help me.
I wonder! Is my case beyond help or Politics and racism are involved.
1-
My site has a political message. It is about launching a much needed political movement in the Middle-East. The Site invites people to register as members and hopefully bearers of this Political Call.
This Political Call is not to the comfort of some powerful groups that could be behind the lack of support that I am getting.
Details of the case.
2-
On my local machine, the process of posting a completed Registration Form is completed without any error and the data is stored on the local MS SQL.
3-
When posting a completed form over the internet, however, one gets a blank page and the process of Registration is aborted.
4-
The Connection String that connects my Asurewebsite to the already linked Azure SQL is not formed correctly, and so I believe.
5-
I used “MSDeploy” to upload the site to the Azure Platform, “All the files and the MS SQL”.
On the Azure remote, I already linked an Azure SQL to my Website, 1gb and paying for it. This Azure SQL copied its schema and data from the MS SQL that “MSDeploy” uploaded.
On the Azure Platform, I can manually access my linked Azure SQL Database, edit its schema, as well as, the
listed data included during the process of uploading.
6-
The Problem: The process of linking the Azure SQL to my site generated the required Connection
String on the remote, however, the Connection String of my Web.Config file on the remote still refers only to the uploaded MS SQL.
Believing that this could be the cause of aborting the registration process I decided, after many unsuccessful attempts to include the Azure generated Connection String to the Web.Config file, to seek the help of the Azure SQL Engineers by
purchasing an Azure Support Plan as a developer, more than 2 Month ago, and paying for it.
7-
I submitted a Ticket, asking for help to connect My Azure Website to the already linked Azure SQL using the already generated Connection String.
Instead of focussing on the connection issue the MS Azure SQL Engineer kept asking me to read irrelevant, mutually referring
and retired articles including one that deals with how to connect to MS Server 2005.
Many emails were exchanged for about 4 weeks and absolutely there was no intention on focussing on the Azure SQL connection need.
8-
Three weeks ago, I submitted another Ticket, voicing my displeasure of the treatment that I received.
However, the second Support professional kept trying to pass me on to other people, departments and finally suggested to set up a Tele-conference that includes many participants. Believing that it is another way of avoid
the issue, I insisted on only discussing my SQL connection need, but this insistence was completely ignored.   Details of the
Site are:
A-
The URL of the Site is:
http://ozza.azurewebsites.net/.
B-
The Azure “Ado” generated Connection String:
Server=tcp:fv9wkz2vsk.database.windows.net,1433;Database=ArabUnity;User ID=ArabUnityServer@fv9wkz2vsk;Password={**my password**};Trusted_Connection=False;Encrypt=True;Connection Timeout=30;
C-
The Publish Profile File:
<publishData><publishProfile profileName="Ozza -Web Deploy" publishMethod="MSDeploy" publishUrl="waws-prod-ch1-001.publish.azurewebsites.windows.net:443" msdeploySite="Ozza" userName="$Ozza" userPWD="ZhbqatbxQ84T8pwgs4fbvxaHbahsuD2cyBohLGArxH7hx2NQ2hMvS9NqqhDp" destinationAppUrl="http://ozza.azurewebsites.net" SQLServerDBConnectionString="Data Source=tcp:fv9wkz2vsk.database.windows.net,1433;Initial Catalog=ArabUnity;User ID=ArabUnityServer@fv9wkz2vsk;Password=********" mySQLDBConnectionString="" hostingProviderForumLink="" controlPanelLink="" targetDatabaseEngineType="sqlazuredatabase" targetServerVersion="Version100"><databases><add name="ArabUnity" connectionString="Data Source=tcp:fv9wkz2vsk.database.windows.net,1433;Initial Catalog=ArabUnity;User ID=ArabUnityServer@fv9wkz2vsk;Password=********" providerName="System.Data.SqlClient" type="Sql" targetDatabaseEngineType="sqlazuredatabase" targetServerVersion="Version100"/></databases></publishProfile><publishProfile profileName="Ozza - FTP" publishMethod="FTP" publishUrl="ftp://waws-prod-ch1-001.ftp.azurewebsites.windows.net/site/wwwroot" ftpPassiveMode="True" userName="Ozza\$Ozza" userPWD="ZhbqatbxQ84T8pwgs4fbvxaHbahsuD2cyBohLGArxH7hx2NQ2hMvS9NqqhDp" destinationAppUrl="http://ozza.azurewebsites.net" SQLServerDBConnectionString="Data Source=tcp:fv9wkz2vsk.database.windows.net,1433;Initial Catalog=ArabUnity;User ID=ArabUnityServer@fv9wkz2vsk;Password=********" mySQLDBConnectionString="" hostingProviderForumLink="" controlPanelLink="" targetDatabaseEngineType="sqlazuredatabase" targetServerVersion="Version100"><databases><add name="ArabUnity" connectionString="Data Source=tcp:fv9wkz2vsk.database.windows.net,1433;Initial Catalog=ArabUnity;User ID=ArabUnityServer@fv9wkz2vsk;Password=********" providerName="System.Data.SqlClient" type="Sql" targetDatabaseEngineType="sqlazuredatabase" targetServerVersion="Version100"/></databases></publishProfile></publishData>
D-
I activated the Kudu site to process my Website on the Azure Platform and the voluminous Log “Dump File” it
attached.   It includes comprehensive details about any and everything that is related to my Website.
I desperately need help in and willing to provide any other information one may need.
Respectfully Yours,
Abdou Aboyoussef..

hi Joseph,
We apologise for all happened to you. I check your supplied website url and check this page (http://ozza.azurewebsites.net/DisplayData.cshtml ), I found you could get data form database. Did
you resolved this issue? If not, I recommend you could refer to those documents (http://www.windowsazure.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
& http://msdn.microsoft.com/library/azure/ee621781.aspx ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My laptop will not support creative cloud and i want to cancel my membership/subsription

My laptop will not support creative cloud and I want to cancel my membership/subscription

Please check Cancel your membership or subscription | Creative Cloud
If you are prompted to sign in please use the Adobe ID associated with your active subscription as I couldn't see any subscriptions associated with the ID used to post on this forum.
Thanks
Bev

Lack of support for the Android Tablet Forum

It seems there is a lack of Lenovo involvement in the Android Tablet forum. I'm posting here in order to point this out as someone with Lenovo really needs to follow up on the issues there. Many of us are waiting on the Lollipop update for our tablets and the roadmap states that an update was released, yet no consumers have it. It even went so far that a Lenovo employee told people that their Lollipop update would be released country by country starting that day, and almost a month later, no one on the forum has it (possibly no one worldwide). This lack of support will drive some customers away. We don't ask for much, just keep us up to date and let us know that our issues are not ignored. Right now, we feel ignored. The hardware of the tablets are very nice and extremely capable, we just need some guidance and answers.

Lenovo just doesn't care. All they want is a quick sell with absolutly NO SUPPORT !!.They may well sell good hardware but it is all useless without some support. Are all companys this bad?

LACK OF SUPPORT CREATIVE

Similar Messages

Maybe you are looking for