Lack of trained support agents!

Hi all
To start with im a pretty savvy computer user.
When contacting BT and asking about thier unlimited BB i was told by the slaes rep that he had downloaded 500gig a month without restriction and i would not need to worry about a a fup restricting my speed.I asked this because my previous supplier had implented a fup on my line then tried to troubleshoot speed issues for 3 weeks before realising and  telling me about the fup.
Imagine my amazement then to get a restriction for downloading more than 50gig(about 2 years ago)
Until the last 3-4 weeks i have suffered with speed issues constantly(23 mnoths).In those 23 months it has taken over 50 phone calls,3 engineer visits,5 conversations with managers,about 15 promised call backs of which over 10 didnt happen.
An example of 1 support issue i had personally and seems to be typical of the way tech support operate.
This support request was about net protect plus picking up flase positives.
After calling support and going through the issue i had with the first support rep which took about 10 mins and 5 explanations i got transfered to the security department.
The support rep i spoke to here wanted to remotely connect to me to start with after i explained loosely what the issue was.He then asked me to try launching the game.I replied i cant as the file is quaranteened in net protect plus.He then loaded the mcafee interface and could niot find the quaranten section.(A TRAINED SECURITY SUPPORT AGENT!).He then asked me to try launching the game anyway.So i went to the website i use for this(metaboli a legit subscription based service)and nothing happened.NO WARNING from mcafee that it has blocked anything and the game did not launch.Then with out asking me the security support agent uninstalled mcafee restarted my system and asked me to launch the game.HMMMM i thought at this pointas i needed to be connected to the net to launch the game.I expressed my concerns at this point and was told it is ok windows firewall will be on by default.I there fore decide to try to launch the game.When launching i explained to him as this game was downloaded it might take 5 mins to lunch the first time as it would need to unpack files.Ok he said.I then went to grab a cup of coffee.
When i returned the so called securtiy support agent decided to go and surf the net with my computer.That is bad enough that he is using my connection and computer to surf but is made a whole lot worse when you bear in mind he himself has just uninstalled my security software so there is none installed.I was furious at this point and rightly so!!!.Shortly after i returned the game launched fine and the agent then reinstalled my mcafee.He then asked me to try and launch the game a 3rd time which i duely did and yet again nothing happened.NO WARNING from mcafee and the game did not launch.He then loaded the mcafee interface put me on hold for 4-5 mins and asked his supervisor to have a look.The supervisor then found the quaranteen section and the file was picked up as an artemis......The supervisor then tried to send it away to mcafee but the file was too big.He also told me it must be a virus as mcafee had given it a name and not to play it.I then asked why mcafee had given me no warning at all and was told it was not possible to get mcafee to notify me.
After this conversation i decided to check up on the virus name etc to find out some info.I found that the artemis name given to the virus is a prefix for when the scanner thinks a program has been acting in a suspect manner and it might be a flase positive.If i goto the settings in mcafee and turn off scan for unknown viruses the scanner ignores the game and allows it to launch.
Im somewhat perplexed as to why
1.A so called BT trained security support agent would act in such a manner and put a customers computer at risk like he did
2.why does BT net protect plus not notify the end user when items are blocked(not during a virus scan)
3.Why is there no way to add exceptions
I complained after this and was offered 1 month free time but It really amazes me that a big company like BT have not after all the feed back left on these foums actually done something constructive with thier support service.It is a complete joke at best when SO CALLED TRAINED agents can operate and do act in this manner.
I had an almost identical situation today with support india so it would seem BT have learnt no lessons since my original complaint some 8-9 mnths ago.What is the good of complaining if you are not going to learn from it.Do bt really think customers like to complain just for the sake of it????I have far better things to do with my time so come on BT please sort it out!!
sorry for the ammount of text but i felt i had to give my complaint some context

Hi bifta,
First of all welcome to the forum.
I am glad you were able to find a solution to this though I am sorry for the problems you've had with the helpdesk as they weren't able to get it sorted on their end.
I have fed back the experience you had with this particular problem and if there's anything we can look into for you get in touch, we're here to help.
Many thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Lack of Training / False In-Store Advertising Complaint - Avon, CT Store (Want Executive Level Contact)

    Hello,
    We have been Verizon customers for many years and typically enjoy the product and service.  However, this last upgrade we had a horrendous experience as a result of poor training by staff at the Avon, CT store.  We both upgraded our phones to Samsung Galaxy S4's.  My wife from an iPhone 4S and myself from an LG flip phone.
    After the setup, we needed to contact Verizon on 4 separate occasions to remedy errors in the setup of our phones and issues with account billing. 
    Issue 1 (False Advertising / Lack of training - company discounts):  The representative at the store wrote out our billing scenarios on the new "Edge" formatted comparison sheet and included a 15% blanket military discount to our bill, saying "yes you will receive a 15% discount on your bill".  He made no mention of the discount applying to the data package only AND even wrote an inaccurate bill number on the sheet, misleading us to a false monthly bill we were not prepared for.
    Issue 2 (Lack of training - phone upgrade):I  My wife's iPhone text messaging was still active, causing her to receive texts on her old iPhone while missing key messages on the new Samsung Galaxy.  This took upwards of an hour on the phone with Verizon technical support to understand, and the problem ultimately was still not resolved (see Issue 2).
    Issue 3 (Lack of training - phone upgrade):  The iMessaging service on my wife's iPhone was still active and needed to be turned to OFF.  This was not done in the store nor did anyone have any idea how to do it.  After yet another hour on the phone with Verizon tech. support, we reached that conclusion and it finally worked.
        Note:  This happened to a relative as well during the exact time frame we had this happen!!
    Issue 4 (Lack of training - phone activation):  My Samsung Galaxy S4 4G service was not activated for me.  I had no idea why I could not access the internet while out of the range of my WiFi until my wife figured out the 4G was off.  We were "all set to go" when inside the store.  This required again a 20min+ phone call to have to tear my phone apart to pull out the SIM card while they activated the 4G.
    We would like to be contacted to discuss this experience and how we can help use this to improve the services and training requirements of Verizon.  Can we be connected to an executive level person?  We love the company, but this last experience was just miserable.
    Thank you for your time.
    Sean

        Sean222, thank you so much for this feedback! I do want to start off by saying that I am sorry for all the time that has been spent on getting these phones all up and working. Getting a new phone should be an exciting time! I would like to go issue by issue with you.
    Issue 1: We would like to make sure that we provide this feedback to the store location to make sure that facts are delivered when we present customers what their monthly bill is going to be. It's very important to do so. In order for us to get this to go to the proper store and management could you please send us a Direct Message http://vz.to/1fbIKzK . (If you can accept my request to follow you. Then request to follow me back, I will then accept and you will be able to send me a Direct Message).
    Issue 2/3: I know that we have been having some issues when a person comes from an iPhone to an Android phone with text messages. I am very shocked that it up to an hour for technical support to understand what was going on. I know that it took some time to finally get the messages to start working, but I am happy to hear that they were able to get things back up and running again.
    Issue 4: Again, I apologize that when the device was set up at the store location they didn't test out the network before leaving the store. This is another issue that we could get addressed in the feedback to make sure that we check all the major functions of the phone are working before you leave the store.
    I really hope to hear back from you in a direct message so we can provide the proper feedback.
    Thank you,
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • Lack of Migration support for 6.0 & 10g users

    Hi,
    One of the 1st things we wanted to do with the beta as an existing customer is to validate migrating a project from our existing Production version (6.0) to 11g.
    While the import appears to work, opening any imported diagram throws an XML parsing exception.
    After raising an SR, it turns out that migrating from previous versions is unsupported until 11gR2.
    This puts me in a tricky spot as one of the main business drivers to adopt 11g is product upgrade.
    I am very surprised to see existing customers nt being catered for in the new version, as running multiple versions in Prod is not a realistic option for most.
    Backwards compatability is therefore very important to the existing user base!
    So, questions for Oracle:
    1. Can you please reconsider the lack of migration support for R1?
    2. if this feature cannot be working for R1, what is the expected release date (even if its just a quarter) for R2?
    3. To save my time, is there a list of what other features are not for going to be available in the Beta / R1 release?
    As a Beta tester my time is precious, and I need to know what I can expect to work, rather than report issues only to then find out that its not supported...
    Thanks,
    Ian
    .

    Hi Ian,
    You are right in the sense that upgrade will be supported in BPM 11gR2. More specifically, the upgrade will support OBPM 10gR3 to BPM 11gR2. Customers in older versions of OBPM and ALBPM will need to upgrade to OBPM 10gR3 before attempting the upgrade to BPM 11gR2. To upgrade to OBPM 10gR3, there are a series of pointers in our documentation on how to do this. I can explicitly provide links if you are interested in this mandatory upgrade before moving to BPM 11g.
    As per the reason for not being able to support upgrade in this first version of BPM 11g, it simply boils down to time to create the new unified BPM platform which in itself is a major undertake from an Engineering perspective. Once the foundation is complete (this is the objective for BPM 11gR1), we will start working on completing the delta to upgrade OBPM 10gR3 projects to BPM 11gR2 as best as possible. There is a document we have been sharing with customers with Best Practices for implementing OBPM 10gR3 projects with idea of an upgrade to BPM 11g. We do have significant knowledge on some pieces that we will be able to automate from a migration perspective and some others that will be hard to upgrade. If you are interested in this document, we can provide this to you.
    If you have any other questions, please let me know. I would be more than happy to assist with migration questions with the most up to date knowledge I have on this front.
    Regards,
    eduardoc.

  • Lack of Tech Support and inferior product

    So tired of this lack of tech support for the G2. I'm on my second one. First one had a headphone jack issue that caused the mic to stop working, now this one is doing that, and to top it off I've had to do 3 factory resets in order to send picture messages. Fed up with this.

    Headphone jack is basically shorting out the phone. This is a refurbished "like new" one and I've only had it a month maybe.  The first phone I had replaced on the warranty. If you barely moved it, it would register as you having unplugged the headphones. Eventually it got to the point where the microphone wouldn't work either. So people could talk to me, but I couldn't talk to them. I've tried multiple headphones and auxiliary cords, they all do the same thing. I've googled the problem and it's a known issue with this phone, at least know by the customers, perhaps not acknowledged by LG.
    Picture messaging is working for now, after my second or 3rd factory reset, this is also a known issue, I've gather from perusing the forums. Supposedly a glitch in the new OS. Hear there is talk of a fix in September or August.....I only use the native app to text pictures. I tried sending with data turned off and wi fi on, with data on and wifi off, and with both data and wifi on, and it refuse to compress the picture.

  • I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd   Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

  • ICM 8.0(2) - Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached

    Hi,
    I have an environment with ICM 8.0(2) integrated with UCM 8.0.2.40000 and IPIVR 8.02.11005.
    The system are working properly but sometimes all the agents are forced to disconnect on the CTI OS Toolkit and all the functions are disabled then the agents just are able to log in again after restart and reset the extension mobility.
    After analyze the logfiles of the CTI OS Server, I found the following messages:
    16:55:04:171 unknown-ctios Trace: [agent.5000.5053] QUERY_AGENT_STATE_CONF ( eTalking ) : (PeripheralID:5000
    AgentState:eTalking NumSkillGroups:2 MRDID:1 ICMAgentID:5097 AgentMode:1
    MaxTaskLimit:1 NumTasks:1 AgentExtension:78112238 AgentID:5053
    AgentInstrument:78112238 UniqueObjectID:agent.5000.5053
    MessageID:eQueryAgentStateConf AgentAvailabilityStatus:0
    SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
    SkillGroupState:7) SkillGroup[2]:(SkillGroupNumber:37 SkillGroupID:5151
    SkillGroupPriority:0 SkillGroupState:4))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29262]
    16:55:04:171 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
    16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[15494] INFO MESSAGE, length: 86
    16:55:04:187 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15494]: Changing ClientID
    ["15494"->"MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)"].
    16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)] INFO MESSAGE,
    length: 277
    16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of
    supported agent mode connections [2000] by one CTI OS Server pair has been
    reached.
    16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_REQ : (PeripheralID:5000 PeripheralType:0
    AgentState:eUnknown AgentExtension:78112258 AgentID:5046
    AgentInstrument:78112258 AgentPassword:123456 SkillGroups:()
    UniqueObjectID:agent.5000.5046 MessageID:eSetSessionModeRequest
    ClientAgentTemporaryID:agent.1357919595 ClassIdentifier:1 IsSupervisor:0
    LastError:(dotNET_Sess(10041842)_EvtThd(164):0) ConnectionMode:1
    CILConnectionID:15494 AutoLogin:0 SavedAgentState:9 WaitingforRecovery:0
    SavedLoginInfo:() NonClientRequest:1 CurrentProfile:(null)
    IsAgentTeamMember:0 SavedAgentId:5046
    OriginatingClientID:MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)
    SilentMonitorTargetAgentUID:(null)
    SilentMonitorCallUID:(null))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_REQ, 29262]
    16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_CONF ( eAvailable ) : (PeripheralID:5000
    AgentState:eAvailable NumSkillGroups:2 MRDID:1 ICMAgentID:5080 AgentMode:1
    MaxTaskLimit:1 NumTasks:0 AgentExtension:78112258 AgentID:5046
    AgentInstrument:78112258 UniqueObjectID:agent.5000.5046
    MessageID:eQueryAgentStateConf AgentAvailabilityStatus:1
    SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
    SkillGroupState:3) SkillGroup[2]:(SkillGroupNumber:48 SkillGroupID:5362
    SkillGroupPriority:0 SkillGroupState:3))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29263]
    16:55:04:187 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
    16:55:04:203 unknown-ctios Trace: --> RCV CLIENT[15484] INFO MESSAGE, length: 89
    16:55:04:203 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15484]: Changing ClientID
    ["15484"->"MV4702-4160-dotNET_Sess(48095888)_EvtThd(1062)"].
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)], CLOSE
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)][0x4dcdc08, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)], CLOSE
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close: CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)][0x576e630,
    CLOSE(), Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)][0x4f98000, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)][0x66ba9f0, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)][0x7572c10, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)][0x5ecf2d8, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: ClientMgr[1]::OnConnectionClosed,
    Client[0x0576E630][MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)]
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)][0x5508cc8, CLOSE(),
    Calling OnConnectionClosed()
    The message that caught my attention was the following: 16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached.
    But in our environment has only 250 agents
    Anyone seen this before? Thanks very much

    Hi Gergely,
    I analyzed the following situation: when the agent logs in the CTI OS Toolkit the client opens a lot of sessions with differents ports.
    Like the following example:
      TCP    bbaproggerp1:42028     mv8011:4544  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4545  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4546  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4548  ESTABLISHED
    Where mv8011 is the hostname of the machine and 4544,4545,4546 and 4548 are the ports of CTI OS Client connected on port 42028.
    When the agent disconnect of the application just one connection is closed then  if it logs again another two connections will be open.

  • DISAPPOINTED AT THE LACK OF CUSTOMER SUPPORT IN TR...

    Hi all,
    I want to share my BT experience with you.   I have been up to now a happy BT Infitinty customer.   At the start of July I informed BT of a house move at the end of July.  I happily signed for a new package, NO BRAINER as far as I'm concerned.
    One specification of my order is as I was providing sufficient notice I advised them that whilst the postcode in question show's to part of a village which has Infinity, the house is isolated and presently does not have a phone line.  I advised a survey to carried out to enable the engineer to carry out the necessary work when I moved in.  The main reason for my request was I know it's a very poor reception area for mobile phones and presently my father is not very well and I need to be contacted.   On the day of moving in the engineer turns up, and guess what the necessary requirements which I made them aware of had not been carried out.    The engineer informed my that the road required traffic lights in order for me to have an installation.    I'm sure you can imagine my disappointment, especially when I knew this would be the case.
    Obviously I've spoken to numerous customer service advisors.   All giving me different reasons for the delay.  The main reason is for traffic management to get authorisastion off Flintshire County Council for permsission to put traffic lights up.   So, I phone up Flintshire County Council, and I must confess the lady was MOST helpful.  She informed me that NO application has been made for my house/postcode/road.  This, has tipped me over the edge.   I asked, if Bt had applied how long would it take for approval for them to carry out the necessary.  Her reply, 24 hours.
    I've now spoken to 4 different people over last 2 days.  Obviously highlighting what the Council have informed me.   Presently, I've been informed that my NEXT UPDATE (NOT INSTALLATION) is now the 20th August.  
    I've never had such poor customer service, from what I thought was a world leader in Telecommunications.  I find the who experience shocking.  And more importantly I'm still in a position where I'm concerned about my Father and been kept in touch.
    I, myself work for a BIG European Car Manfucaturer.  If I had treated anyone my customers in the way I've been treated I would have been sacked.
    All I want is to speak to someone in authority and I want a definitve date to when it WILL be done.   What I dont want is to be lied to and passed around from pillar to post.
    Nigel L Bevan
    Solved!
    Go to Solution.

    I agree in the lack of support and not only its that the lack of knowledge within the stupid call centres.
    it has been the most frustrating thing ever to try and explain to these idiots whats going on when all they do is ask you to unplug your modem etc before you even have the chance to tell them anything.
    I had an engineer out today he was here for three hours he fitted new equipment and left the house to go to the exchange box several times, he did everything he could and I was here when he made calls to try find out the problem. he got no joy and had to leave without setting up my broadband. I spent at least 4 to 5 hours calling B.T helplines etc only to find that they cant help in any way unless its to completely wind you up.
    the engineer explained everything was fine at this end and to contact B.T. since we have no dsl light on at all yet lines are working ok. I first had to wait in a queue for 30 mins then i told the man who answered the full story that we had no problem here but no infinity and engineer had to leave without setting it up. the man started prattling on about did i have my modem plugged in and what lights were on and did I try a reset!! "HELLOOOO" once again I said the engineer just left and its set up fine and there is no dsl light!! He then asks me if my phone line is working after I already told him I was calling from house phone and its working fine.
    He then tells me my infinity wouldnt be live until 12 midnight (alarm bells) this is what I had been told before and nothing happened until the following monday.
    He then told me he would put me through to someone who could resolve this, I said i didnt want to spend another day of my life on hold but he said no its an internal call and i would get straight through. However another 30 mins later after being on hold someone answers and asks what the problem is. I had gone back to the same call centre i was at in the first place. I was furious.
    I have spent the entire day trying to get this sorted out and all i have had is pathetic excuses and a help team that really can do nothing for anyone!! It seems they are only there to passify disgruntled customers pass you around their call centres taking the P*@$ winding you up and nothing more. If anything they make everything worse. terrible customer service and wouldnt reccomend to anyone especially if your easily stressed out.
    P.S its after 12 midnight and guess what...... yep still no service what a waste of time they are

  • IPad 2 Lack of Apple support for Display Issue

    Recently I puchased two Ipad2's and one has a distinct yellowish tinge to all display white areas compared to the othe ipad2.  I realise there is some variability in the displays but this is quite a noticable difference leaving the entire display generally darker at various brightness levels compared with other ipad 2's I have compared it with.  For example, entering the  setup menu the greys are much darker and this does not appear to be an intensity issue.  Increasing the brightness does not solve the colouration issue.
    I contacted Apple express support today and as the iPad2 is still within the 14 days I asked for it to be replaced.  The Apple support representative refused stating I had to submit the item for service instead at my nearest apple service agent to have the issue assessed and corrected.  I have apple care on the ipad2 and was under the impression Apple normally honor the 14 day refund / exchange policy.  I spent considerable time on the phone with Apple Australia today and tried a hardware reset and answered several questions etc I am not using a screen protector either as the item is literally just out of the box.  Given the holidays I will not be able to get the unit into Apple servcie until after the 14 days expires.
    Has anyone in the forum experienced a similar issue with the display and had issues with Apple debating if there is a hardware problem with the display?  Or is there any way to fix the issue I have not already tried?  This is really annoying.  Normaly I would not worry about minor display differences but the issue seems to make the images darker on comparative measurements against other ipad2 units including the one I bought for my wife.  The only difference in the latter case is my ipad2 with problem display is a black model 32GB versus the 16GB white model ipad2 my wife has.

    Thanks for the advice, but there is no Apple store within the city I live.  The nearest is 300 km away.

  • Aperture lack of DNG support unfortunate

    It's difficult to understand why Aperture does not offer support for Adobe DNG files. 
    DNG/RAW files are being used by some camera manufacturers that I work with, and they contain a wealth of metadata as well as the broadest range of image data, including "altitude", which is now very useful in my professional work.
    This lack of support has forced me to go back to Lightroom, and to reconsider that application as my primary media catalogue and editing application.

    A JPEG saved as a DNG isn't really a DNG file.
    It is true that Aperture doesn't have "comprehensive" DNG support. It doesn't support linear DNGs, and it doesn't support some of the newest DNG extensions that Adobe has added (lossy compressed DNGs, etc.). I don't know the exact version of the spec that Aperture supports.
    But do note that DNG is a lot of things. It's a fairly comprehensive spec that has many versions, with lots of different things. Aperture does support many DNG properties, but not all of them. If you want the latest, greatest, most comprehensive DNG support, then Adobe will have it, as it's their specification.
    I personally just use the RAW files that come out of camera - whether they be NEF, CRW, CR2, or DNG. I _never_ convert my camera RAW files into DNG, because that actually strips some data (in my case, focus point informatin from CR2 files that Aperture can display, is removed from the converstion to DNG). There are many long-winded discussions on the "value" that DNG provides, and I don't subscribe to them. It provides no legay-proofness today that's unavailable other places.

  • BT, An absolute joke. Lies/Ignorance/Lack of train...

    I have had my infinity 2 connection for around 12 months now, first sync speed, 64.1meg down, 20 meg up. After around 2 weeks it settled to 55-60 meg down, 20 meg up and I have not had an issue since the very start.
    Always download at speeds around 7.4mb/s (Megabytes, not bits).
    Heres where the problems start.
    I phone to enquire about BT Vision, I ask the sales staff if it will impact my broadband speeds, the sales staff couldnt answer my questions so they passed me to a BT Vision tech agent who informed me that "Your broadband will only be slower when your watching a streamed channel, as long as you turn the box to standby when not watching the broadband should be as it is now."
    Happy with the answer he put me through to the sales agent again and I order the BT Vision + box with the full package.
    I receive my box on July 29th and I plug it all in. The vision box sets itself up and then tells me that my broadband is not quick enough to support the bt vision channels and that I am not connected to a suitable home hub, Erm, I am a Home Hub 3 and the vision box is plugged into port 1 as it stated on the setup guide.
    I proceed to reboot the router, same problem, reboot again, same, reboot again, same. I go make a coffee and while im making the drink i hear the sound of a tv channel, ahaha its working, sky sports is on. Perfect I think. Yeah, right.
    I admin a few websites hosted on dedicated servers in paris and normally when downloading the sql backups i get flat out 7.1-7.4mb/s. All of a sudden im getting 5mb/s, a whole 2mb+/s slower. I think maybe its a routing issue over the water to paris so then proceed to try a few other methods of maxing my line out (8 newsgroup connections, 5 ftp connections) every single one, same speed 5mb/s and the vision box is not even turned on.
    I phone BT and report a problem. This drags on for 11 days when finally i get a BTO engineer turn up at my house. He replaces the socket on wall, modem and cables. I should also add i have in this 11 days also bought myself a nice shiny home hub 4 (didnt make the connection any better). 
    The BTO engineer tells me he has checked the line and its within the 44.2mb max attainable speed on my line. I am shocked and go to check the availability checker on bt's site, sure enough it reports 44.2mb down, 6.5mb up max speeds. This is very annoying, I check this checker roughly every 4 weeks to see if I can get 100mbps yet and it always reported a max estimated speed of 64.6mb down and 20 up. I have had roughly 60 meg for a year, with 20 meg up. How can this change be so drastic, and also how much of a coincedence is it that it only happened when I get BT Vision activated.The BTO engineer then listens to my requests and resets the DLM on my line, straight away the line sync's at 57meg down, 17 meg up. Not far off what I had before, I'm Happy.
    I wake up today to find that overnight the modem has reconnected itself a few times again, now I'm down to 34.9meg down. Sure enough I can only achieve 4mb/s now. Back onto BT.
    I have now spoken to a manager and escalated the fault back to BTO for a possible replug as something is obviously wrong and its not the line or the modem/router/cables in my house. I have a feeling my line has been altered to guarantee bandwidth for the vision box, this is unnacceptable as I asked about this before I ordered the service. Nobody at BT can confirm or deny this either which makes me suspicious.
    I will update this thread when I see the next BTO engineer and see what they say but everyone beware. If you get vision and you lose around half of your download speeds dont say I didnt warn you. The only fix I can see at the end of this tunnel is to return the Vision box and get out of the new contract and back onto my old one, my services have been disrupted since I had it, not to mention the lockups and reboots you have to do with it just about every day.
    Looks like its time to jump ship to another ISP once the contract is up on my phone/broadband. I only went with BT as nobody else offered fibre at the time. This isnt the case anymore. 

    Hi ballz,
    Welcome to the community!
    I'm sorry to see that you're having problems with your broadband speed. Click on the "about me" section of my profile and you'll see the link to get in touch with us.  We'll help sort things out from here.
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • VERY dissapointed by lack of Mac support

    Hi,
    well I've read a lot of posts on the web now about this and they all say the same thing: Why doesn't Creative make Mac drivers? And I've yet to see a reply! I've bought a Vista IM and of course it won't work on my iMac G5. I think this will put me off buying anything from Creative again.
    Theo
    UK

    Same here. I looked all over for a mac-compatible USB webcam, and found very little support out there. Macam is good, but due to Creative's lack of support (which amounts to simply giving the Macam people documentation, takes practically no effort on Creative's part) none of their recent webcams are supported. I went with a competitor for a couple of webcams instead, including the Philips SPC900NC (works well with Macam).
    If Creative can't be bothered to support Macs, the least they could do is have some open dialog with the Macam people or send them a bit of documentation. But as it stands, Mac users will simply have to ignore creative.

  • How to reach a live support agent

    Without making an unauthorized billing report to my email or scheduling a call, how can I get a live agent?

    Go here:
    http://www.apple.com/support/itunes/contact/
    and click the "Contact iTunes Store Support" link. Follow the selections for the problem you wish assistance with as best you can match to the options and you'll see the contact options available to you. The options available will vary with the country, time and specific problem and may include live chat, callback or email.
    Regards.

  • Nokia 1520 shortcomings and lack of proper support

    I have been given a Nokia 1520 as a gift (after i had suggested i liked it). I have owned it for 3 weeks roughly and it's been a total saddening experience. Amongst the countless issues i am meeting are:
    - The infamous oversensitive display issue. Can't type any sms or email straigth without having multiple characters repeated over and over. This also means that while i try to scroll the screen i happen to open unwanted apps or unwanted links in the browser or in newsreaders. Also, trying to select a tile to resize/unpin it, it most often results in opening it countless times before i actually manage to unpin.
    - Lack of a keyboard allowing me to input Traditional Chinese with Pinyin (It was requested in 2011, ie 3 years ago).
    - Timed stroke writing for chinese characters means that if you are too slow (as most westerners writing chinese are) you can't even write characters (maximum timing is 0,8 secs).
    - Lack of any form of quick input like swiping or so. Multiple issues also at downloading languages for the keyboard. A nightmare.
    - The OS won't allow users to select single words or place the cursor in a specific position inside a word. This can be done in some places but not everywhere.
    - Bing Translator honestly sucks and there is a huge shortage of dictionaries and language related resources in the market (nothing comparable to Pleco or Hanping
    - Lack of a decent notification bar and a LED telling people they got mail or messages or calls when the phone is muted. This caused me to lose two important jobs.
    - Very poor/shaky reception for the phone and Internet. Where my Galaxy Note 2 works full broadband, the Nokia connection goes up and down or is none at all.
    - I took the device to Nokia Support Centre in Taipei and the person in charge was a kid who not only didn't know anything about the, now well known, issues of the device but he also got very arrogant, talking carelessly and with a very bad attitude and claiming "people shouldn't buy phones without being able to use them" and "if you tried it before why you complain now?". Tested the phone for 2 seconds and he decided it had no issues, so apparently no chances to have the phone sent for a repair/substitution.
    Is this the path Nokia and Microsoft are taking with Windows Phone?
    I am so disappointed that i am considering reselling the thing and going back from where i came from, IE Android.
    It's a shame Nokia hasn't learned how to treat users yet. I am particularly disappointed at the defective device and at the attitude of the part time, lazy, sleepy teenagers they use in Taipei to cover the service making customers run (or worse since some of those guys really push your patience far above the limits, maybe they don't like foreigners or they are scared at speaking English, whatever it is, it's very uneasy and unpleasant). I have never seen such a bad service for a such a malfunctioning device in my life. I have owned maybe 20 or more devices to date (including old Windows Phones) and never had so many negative experiences piled up all together at the same time
    I just wish i had been given a device with some other OS rather than a device with a Beta version of an OS supported by part time staff.

    This would appear to be a genuine issue with the 1520. Do not have one so could not comment
    - Yes indeed i can grant you it's genuine. Haven't sent an email in the last 2 weeks. Just too frustrating. 
    I know there is several Chinese language settings but as I am not Chinese could not comment beyond this is not something Nokia could do anything about as it is a core OS issue and not a hardware/firmware one.
    - Well, it's easy to see if you have doubts. Enter: Settings-Keyboard and go search for any form of input that says "Traditional Chinese with Pinyin (PinYIn is the romanization of chinese characters. You type say "Wo" and the chinese character for "I" pops up amongst other choices. This has been existing from day 1 in any decent keyboard. It has been requested at MS suggestion board 3 years ago. Is still to be implemented. I find it hard to think how they can sell these phones here (especially considering the relations between China and Taiwan and the fact they use simplified/traditional respectively). It's not only a mad marketing move, it's also politically sensitive. No one normal does that here, believe me.
    There's several swiping keyboard shortcuts such as typing special characters or numerals (tap hold the 123 key and swipe to the desired character)
    - Sure, then do one thing. Download any swiping keyboard on an Android device and then compare the speed at which you type and amend words. The WP keyboard is primitive. The fact you can't resize it combined with the screen oversensitiveness make it useless. Other Nokias are much much better, but you can't beat a real swipe keyboard, especially if you type as a profession. How can someone use such a keyboard on a device in 2014 is beyond me and and anyone else who has used an Android but even a Blackberry in old times. It's simply inefficient compared to anything else out there. Then we can argue on what we like or not but surely not on its lack of productivity compared to else (whatever else)
    As long as the app does not use it's own code anywhere you want to enter text tap and hold to have the cursor appear and swipe to the location wanted.
    - Then do a test. Take an email sent by someone else. Then go to the portion of text he sent you in the REPLY mail you are writing and try to select one of the SENDER's words. You'll see it's impossible. Then move down and try to select a single word of your reply. You'll see it can be done. Different menus pop up based on where you are or which app you are.
    Same is TEXT PREDICTION. It works in some places, doesn't in others, even when you'd need it
    Never used it, as far as I heard especially since tha latest (recent) update this got a lot better)
    You don't. Try to be a foreigner permanently based abroad and the usefulness of these tools (Dictionaries, translators, etc.) will appear immediately, especially when you have to handle or even study characters based on ideograms. Now, Android (Which i insist in saying i don't like due to their philosophy), offers not only a good mobile translating app (including a function where you take a picture then just scroll your finger on the words you want to be translated and translation pops up in a moment) but if you don't like it you can also find a wide choice of tools (Pleco and Hanping being among them and their developers having no intention to expand on WP for now and some not even in the future). In this perspective, what for you is useless or secondary, for people like me (and other expats who do business and work abroad) is a killer application. Google got it. Microsoft and Nokia, it seems, don't.
    Never understood the obsession with a notification bar when your apps and services all give up constant updates and notifications on their tiles. I would not want a blinking light on my phone ever. If you are unable to check your phone even once an hour that is really not the phone or OS problem. Don't try and pin your own negligence on the phone that just makes you look silly.
    Let's try to be constructive. This OS must not be built based on what you as Blog Admin like or don't like. It has to be built to cater for a wide range of users. Now, you don't like that led because apparently your tiles make you happy. I, don't spend all my day watching tiles. I work too so the phone goes in standby and since it's permanently muted (no ring, no vibration), LED is key to understand when i get emails or sms' or other notifications. I am not asking a multicolour LED as in Samsung devices (which allow you to assign a colour and vibration combination to different accounts so you understand based on colour and vibration what is important and what is not; but at least a basic primitve LED telling people "Hey you got mail or SMS". If it's not a LED, a screen notification waking up the phone from standby would to as well. As far as i know it's not present. It was present in many Android devices as both standard or third party app since the very first basic versions.
    So you use a Note2 and 1520 at the same time? this may well have nothing to do with the phone and it won't be the first time it turns out a WiFi router is actually at fault.
    So what do you do? Go to Starbucks and tell everyone to stop using the free Wi-Fi because your Nokia 1520 needs a dedicated connection and i threaten to suit Starbucks for not letting the King have the whole bandwidth for itself?
    Galaxy works fine. Nokia doesn't, especially when broadband gets weaker (Taipei has Wi-Fi also on Metro wagons and any restaurant or other outlet you may think of). Core point is everyone is there reading their content on their mobiles. I am there trafficking with settings and **bleep**. Ended up using my Galaxy which works fine.
    Those are not Nokia owned nor operated stores, go complain to them
    Let me explain you a basic of marketing so you understand when it's not the case to defend a brand beyond reasonable limits even when you administer their blog.
    If i, as a customer, enter a BLUE SHOP carrying a big, huge, NOKIA brand with all people wearing Nokia shirts i (and the other 23 million users who almost stopped to buy Nokia in Taiwan) assume whoever is running it, is running it on behalf of Nokia (Officially or unoficially doesn't matter as they get the license to sell from Nokia in any case). So, if your licensee works good, people are happy and buy more; if the staff shows signs of laziness, arrogance, treating adults without respect, showing ignorance on device's issues (They didn't even know about the global issue of oversensitiveness or about keyboards...the phone was an alien in their hands), people RUN. And i did RUN.
    If you combine the bad support with the fact that the device is actually malfunctioning and lacks a lot of basic functions that in 2014 are given for granted, i beg to think that the only users left once they try the phone for one or two weeks will be some Fans of the brand and a few people who need it to watch movies and take pictures but you don't need a phablet for that. When you sell a bad device and have an as bad support that instead of solving the issue denies it you are turning the market in a self-help environment where users get angered (And you can see how many there are about Lumias and 1520 starting to get on top of the list). So, as much as you and I may stay argue in your blog, i think that if this issue is not solved this OS doesn't have much future.
    Finally, a phablet is a sophisticated device where screen size, hardware and software package combine to offer a certain experience that ranges from entertainment to work IN A GLOBAL CONTEXT (Not in your garden, in your living room or when you show off the device to friends to let them see all those useless tiles which you can't even interact with as they open when you want to resize them etc. due to the bad screen). It means the device must be ready and functional in your country or in mine or wherever you live. In this case, Galaxy and their cheap plastic trash got it right with the Note family. Others like HTC and Nokia are lagging behind and 1520 in this respect is not helping people who want to jump from Android to Windows Phone to make that jump.
    Test the device simulating the job a professional user doess (typing mails all the time, text messages, interacting with web content, copy/paste, translating and sharing data, sending data to other apps in a snap), then multiply that for 7 days a week and then experience the frustration accumulating day after day. In my case, this is further amplified by the fact that i come from a device that has spoilt me allowing me to do things in a snap.
    This phone, as is, is no game!

  • Lack of Keyframing Support in FC Express HD

    For over 6years I have been a long time user of FCP2.0 on a G4,…
    And in the last few weeks, a newcomer to FC Express HD on my new iMacG5/iSight. (I couldn’t afford the upgrade price to move to the FC Studio package.)
    Am I missing something, or is FCE seriously lacking Keyframing support?
    The manual supplied with the software package and imbedded Help Section is sparse on this topic. These onling forums seem to be the best place for getting "How To" advice.
    I really loved the flexibility and control of the keyframe timeline that was alongside all the Motion parameters available in the Viewer pane of FCP2.0
    Tell me I’m stupid and that what I want to see is available, but I haven’t found the right view or mouse click or menu or what!…..
    I simply want to provide dynamic changes WITHIN a clip to such Motion parameters as Opacity. It seems as though this parameter can only be set for the total duration of the clip.
    I have figured out how to do keyframing in controlling audio tracks, and dynamically moving “Scale” and “Position” within the duration of the clip. But some of the other Motion effects (Opacity, Blur,...) seem locked and do not allow multiple keyframes within the clip.
    Help,
    BoBo
    iMac G5   Mac OS X (10.4.3)   2.1 GHz with i Sight & 20" Display

    Tom,……..Thanks again for responding and recommending the Timeline be the pane to control the Motion function, Opacity.
    With a lot of “playing around” and help from a friend in a local Apple Users Group, here are the details that we have come up with to dynamically control Opacity within a video clip:
    Once the video clip is in the Timeline, you turn on Clip Overlays by clicking the squiggly line button in the lower left hand corner of the Timeline window.
    When the 'Clip Overlays' mode is turned on, you will see a black horizontal line appear at the top of all video clips (and red lines in audio clips for that matter). That is the opacity control line at its default 100% setting.
    Then on the Tool palette, you select the Pen tool; it looks like a
    calligraphy pen and is the left option in that tool palette. When you position the tool on the video clip, specifically on the Opacity line, it converts to a pen point. Click on the opacity line with the pen tool and it applies an Opacity control point. Clicking on the Opacity line at multiple points creates finer control of the Opacity function. The cursor turns into crosshairs when over the point. Dragging the cross hair down or up, changes the opacity, much the same way one controls amplitude within the audio tracks.
    Tom, this is the detail that I have not been able to find in the User’s Manual that came in the FCE box, nor in the Help Section of the software. I did learn from the Help Section (page 228 of my version of FCE HD) that the Motion Parameters, “Drop Shadow” and “Motion Blur”, are the only ones that cannot be controlled by keyframes. That’s too bad, because Blurring within a clip can have a neat effect; I don’t need to try to figure that one out quite yet.
    Because of forums like this one, and people like yourself willing to help each other, the rest of us can achieve some satisfaction and performance improvements with this software.
    Thanks again,
    BoBo
    iMac G5   Mac OS X (10.4.3)   2.1 GHz with i Sight & 20" Display

  • Apple ID - Lack of Business Support

    Dear Community,
    I am coming to you asking for advice. I tried everything else, but I simply ran out of options. Here's the story:
    I run a voip business - we develop a software to handle wholesale operations. It is natural that 99.9% of this market is based on international deals. Therefore I do travel a lot. I have a business presence in a couple of countries in EU and in the US.
    Few years ago we've migrated our hardware platform to Mac, followed by purchasing a couple of iphones, ipads, etc. The business itself isn't big - mostly me and my contractors, but we still left a considerable amount of money in Apple's pocket. Recently, however, it turned out Apple is not really ready for international customers.
    The biggest and most important issue is with the Apple ID accounts. I have one of them in the EU and one in the US. The European one is mostly used for software and hardware registration, while the US one was used primarily for iOS content (apps, multimedia and in-app purchases). The reason for such a decision was that iOS devices are more portable (after all I don't always take my whole office with me when I travel), and I also assumed that since Apple has a huge US customer base, they surely must be used to those people travelling abroad. Both accounts are linked to valid CCs, with valid billing addresses in those two regions.
    However, recently Apple decided to ban all my in-app purchases on the US account. I simply cannot buy anything from inside the apps - which is mostly painful when you consider newspapers (the main content is in fact the in-app purchase). I have tried contacting iTunes support a couple of times, but I could as well try talking to my hairdryer or garage door. The response has always been a link to terms&conds, without a single word of explanation.
    In my 10 year IT practice I used to talk to a LOT of different support representatives. Sometimes on the phone, sometimes via email. This has been by far the WORST of them all. It can be pretty much automated using:
    customer_question >> /dev/null
    wait(24h+rand(-6,6))
    send_random_response()
    Can you please let me know how I can get a proper response from Apple in that matter? Phone support says mail iTunes support. iTunes support is as helpful as a batch of copy-pasta monkeys. I have spent some serious amount of money for the iOS purchases and if I had to re-purchase it again using the other account it would cost me more than a new mbpr! Besides, none of these two countries match where I am now, not to mention where I'm gonna be in 2 weeks. I have tried using VPNs througs our office, but it doesn't help.
    The other thing is - how can I purchase Apple Care for my devices that will be valid world-wide? Region-bound warranty extension are of no worth to me, as the chance that I will be in the same country when the device breaks is like 1.72%.
    Thanks for the time you spent reading my post, I'm desperate for any clues!

    You are alone.

Maybe you are looking for

  • How to get sound output to TV via HDMI on my Equium

    I've connected to TV via HDMI to view downloaded BBC content. How can I get the sound?

  • Bootcamp / Vista: LAN not recognized

    Hello, my Bootcamp / Vista does not recognize my LAN/WLAN. I am pretty sure, that it is a driver problem, but where do I get the drivers from. It is said, that it is delivered with the installation DVD for OS X, but I can't find them. Thanks for the

  • How can I dowloaded Recorde phone call conferences posted on the web?

    Hi Friends Yesterday I bought my first IPOD, and I am enjoying the music etc. However, the main reason I bought the IPOD is so that I can record all the phone conference call we have with our internet business. Our leaders have posted several recorde

  • I cannot see my facebook page on my Macbook Pro.

    I have even signed out and tried to resign in, but the page is blank, I have also tried to go into FB via comments from others on my page, but cant see anything.  I can however see everything on my iPhone and kindle.

  • AppleTV 2 (IOS 5) and iPad 2 (IOS 5.1)

    Theres not an airplay icon in the multitasking bar on my iPad 2/iPhone 4S. I swiped left so dont say to swipe. I've tried: Restoring the AppleTV Hard rebooting the iPad Restarting the AppleTV (And airplay is enabled on the AppleTV)