Lack supporting Sony RX100 II in Adobe Camera RAW

Please, integrate full support Sony RX100 & RX100 II to Adobe Camera RAW. This is a very good and expensive cameras. I replace my Nikon D5100 with Sony RX100 II, and second gives better quality despite very small size. But support in Camera RAW limited to opening ARW files — there are no lens profiles for this cameras: automatic correction of chromatic aberration, distortion and vignetting does not work.

Hi,
That specific camera doesn't seem supported as far as lens correction profiles in the latest camera raw 8.2 in photoshop cs6/cc, but you could download the
the Adobe Lens Profile Downloader and search for one.
http://www.adobe.com/products/photoshop/extend.displayTab2.html
The best match i could find is for the Sony RX100, so you can try them and see if they are satisfactory.
After you download the profile(s), they should show up in camera raw.

Similar Messages

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • Adding Sony plugin to Adobe Camera Raw (6.7)

    Can't figure out how to add Sony's ARW2 raw format to Adobe Camera Raw for Photoshop CS5.  Am I forced to go to PS6 and all that Cloud stuff?

    If you install the Sony plug-in, or any other Sony software, in Photoshop, it will create massive conflicts.
    You can't add anything to any version Adobe Camera Raw for Photoshop.  ACR itsel if is nothing but a Photoshop plug-in.  You can only install plug-ins in Photoshop proper, the same way ACR itself is installed.  But, as per the previous paragraph, that is a monumentally bad idea.
    To convert your Sony raw files, you use EITHER ACR in Photoshop, or skip Adobe Camera Raw and Photoshop and use the Sony software for the conversion.

  • I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    Close and restart Photoshop if you have not already done so.
    In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw.  What version does it say there?
    -Noel

  • Can not find folder to load camera raw presets on MAC.  I have searched and says to drop in the library/application support/adobe/camera raw/settings folder but I do not have this folder or can no locate it. I get as far as lib/appsupoort/adobe/camera raw

    I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my  ACR but when I search for the folder to place them it is not there.  From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

    You want your user library
    Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
    In finder click on Go then hold down the Option key and then click on Library

  • How do I get Adobe Camera Raw (ACR) support for my new Canon EOS 7D mkii.

    I purchased the new Canon EOS 7D mkii in early November. I tried opening the raw files in both the latest Creative Cloud versions of Photoshop and Lightroom. I found that Adobe Camera Raw, both the current versions and ACR 8.7 beta/release candidate, did not support this camera. I know one exists because dpreview reviewed the pre-relase version of this camera in mid-October showing images processed with an unreleased version of ACR?
    How do I get this early unreleased version of ACR for this camera?

    Canon Eos 7D Mark ii was launched after we released ACR 8.7 RC. So, that’s the reason it is not included in the RC version. However, it is on our radar and hoping to add it in an upcoming update itself.
    As soon as it is available, it will be updated in the below article.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    ~ Arpit

  • Does the Adobe Camera Raw support Canon Rebel T5

    I have recently learned about RAW images and I am trying it out.  I have Photoshop Elements 12 and when I tried to upload the photo into Adobe Camera Raw it wouldn't upload.  What do I need to do in order to be able to edit my RAW images

    Yes,it does.
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    Your camera requires ACR 8.4.
    PSE12 was shipped with ACR 8.0 and can be updated to 8.5.
    Go to the menu Help/Update to get the latest version.
    If that does not work, what is your OS version?

  • When will Adobe Camera Raw support the new Nikon D3S?

    Just putting my friendly nudge in

    You could check in the Adobe Camera Raw forum.
    Camera Raw forum.
    (Nudge nudge, wink wink.)

  • Do you have any neartime plans to implement Fuji Xe-1 RAF format of RAW files into Adobe camera RAW?

    having recently purchased the amazing fuji x-e1 i was quite disapointed to find a lack of RAW support for the fuji's RAF files.
    are there any plans to add this soon or to the next update of adobe camera raw?

    This is a user-to-user forum.  Although there are some Adobe employees who monitor this forum occasionally, you are not addressing Adobe when you ask a question.  Most of the people who comment here are simply users like yourself.  However, you should know that updates are made available about every three months.  And, usually, new cameras will be supported in the next version of Lightroom and Camera Raw, unless the camera is released too close to an Adobe update.  If that happens, then you can usually expect support for the camera to be in the next update.  None of us know when that will happen, and anyone who works for Adobe is not at liberty to divulge that information.  Your camera will probably be supported in the near future, but you will simply have to wait and see when that will take place.  I know, not a real satisfactory answer.  But that's the way it is.

  • Aperture and Adobe Camera Raw

    I would love to set up Aperture to allow me to edit images in Adobe Camera Raw.  I can open images from Aperture in Adobe Camera Raw by setting Adobe Bridge as my external editor, but none of the adjustments are saved in Aperture.  From Bridge, I can also save the file as a dng file that Aperture should be able to read and save it in the numbered folder where Aperture placed the original raw image, but the saved dng file doesn't show up in Aperture.  Apparently Aperture can't see any images in its own folders if it didn't place them there.
    I also tried making my adjustments in Adobe Raw, saving it as a dng file and then importing it into Aperture.  This is not ideal, as it would be convenient to do the Adobe Raw adjustments from within Aperture, but it does allow me to import the edits into Aperture.  Aperture does something odd in this case.  When I open the imported dng image in Aperture, at first it displays it with the edits I made in Adobe Raw but after a few seconds reverts to the originla raw image.  I can't figure out how to recover the adjustments.
    Can anyone fill me in on the nuances of Aperture in this workflow?  Is there some way I can at least make the raw edits in Adobe Raw and make them available in Aperture.
    Some of this may be my ignorance.  For some reason, I have never been able to fully grok the whole version/master process in Aperture, never quite sure how to move between versions and masters.  I suspect that some of my issues with the imported dng files is a version/master thing that I am not understanding.
    I'm beginning to wish that I had set Aperture up to use external folders rather than place my files in the Aperture database.  I think if I had done this it might have eased my current issues.
    Is there any way to export an Aperture database so it exports the images into folders that correspond to projects and folders in Aperture?  I suspect not, but . . . one can wish.
    Any help with any of this would be greatly appreciated.
    Thanks,
    --Kenoli

    Kenoli Oleari1 wrote
    If this is what is happening, it means Aperture can interpret the ADR data, but chooses not to.  If I could get it to use that data, it could solve most of my issues.
    In the Adobe Camera Raw preferences, there is a section called: 'DNG File Handling'. You can (and may already have) select the option 'Update embedded JPG previews' and use the drop down to select either Medium or Full Size. The result should be (in Bridge at least) that adjustments you make in ACR and then either click 'Done' to save to the .XMP file inside the DNG file or click 'Open' to launch and render the image in PS for further work.
    The result should be an updated embedded JPEG inside the DNG file that can be used by any program that can read DNG and is set to use an embedded JPEG.
    In testing on my machine a couple of years ago on Snow Leopard, the OS X included program Preview did not show the updated previews though. It only displayed the original RAW data. I assumed it either was not set to show any embedded JPEG preview, or was simply not designed to be compatible in that way. Preview uses the same digital camera RAW compatibility function of OS X that Aperture uses. So it did not surprise me to see that it was not working in Aperture at that time. This was either a later version of AP 2 or early version of AP3, but I can't remember for sure.
    It was my understanding that the purpose and function of dng files is so that raw edits made by any software could be accessed cross platform through the open source dng file.  If Aperture simply chooses to ignore that data, it defeats the purpose of dng.
    My understanding of DNG is that it is an archive type file made of (1) a RAW conversion which holds the decoded RAW data, (2) any .XMP file that has been created by the decoding software as well as; (3) ITPC and EXIF metadata and some other info such as ICC profiles and the JPEG preview. You can also opt to include the original RAW file.
    I don't know the extent to which Aperture is designed to support the DNG file though. Does it handle it like a PSD file where it retains the full file content, but only supports displaying it in a limited fashion (e.g., no transparency)? Or should it actually read the .XMP data file and render it based on that info? I don't think this is the case as the .XMP data that pertains to adjustments made by another RAW decoder doesn't seem to be compatilble with the way Aperture is handling adjustments.
    You could certainly test the embedded JPEG in a DNG file by making and saving some changes to the copy of a file in Finder and then comparing the original DNG to the adjusted one using the Preview program. If the changes are not shown, then the issue (or lack of one depending on Apple's point of view) is with the OS X digital camera RAW compatibility function (which they update for new digital cameras periodically).
    If Preview does show the changes, you could then import both the original and adjusted DNG into an Aperture library (even a new test library) and see if it displays the differences. If it does, then this would point to an issue with sending a file from inside Aperture to an external program and then saving back (assuming this still fails to work as you expect).
    Sorry I don't have more. I decided not to go with DNG and just archive with RAW and JPEG depending on what I end up wanting to do with the images.

  • I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop.  I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG.  Is there a way to use

    I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3.  When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files.  I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file.  I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud.  I would prefer to use my CS3, if possible.  Can anyone advise me what to do?

    The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Some options:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
    Camera raw, DNG | Adobe Photoshop CC

  • Opening tiff photos in Adobe Camera Raw

    I can not open my tiff files / photos in Adobe Camera Raw.  I am using CS6 that has been completely updated with all the current updates. I go to Bridge, highlight a tiff thumbnail photo and go up the file drop down menu.  The open in raw selection is grayed out and I can not select it.  It works fine with jpeg files, and I can open raw files without problems.  It just won't work with tiff files. I have gone to preferences and selected the option to open all supported tiff flles but this did not work either.
    I have uninstalled Photoshop and Bridge and reinstalled it and updated it all again and it still will not let me open tiff files in Camera Raw.
    Any ideas?

    I am more apt to beleive the issue is with the tif files themselves. Not all tif files are equal. It depends on the compression, bit mode and so forth. Can the tiff files be opened in photoshop? if so, then that just maybe the problem. if not, then the file itself maybe corrupt. But I am leaning towards the settings used when saving the file.

  • How to get Adobe Camera RAW loaded so I can open RAW files from a Panasonic LX7?

    I opened these images two days ago. Now I get a message that the CS6 Photoshop does not recognize this type of file. I went online and again(3rd time)downloaded Camera RAW 7.3 and tried installing and opening the images.
    Once again - same thing.
    Now I have something called a DNG converter on the machine and I don't know what it is.
    I opened it and tried to get to the LX7 files in my computer I can see in Bridge - and the DNG converter does not show the files at all.
    I was doing just fine with CS5 - then I bought this piece of crap because I could not get an update for CS5 to open the Panasonic Lumix LX7 images. So, I wasted $200 on CX6 only to find I can't get my images opened.
    I hate photoshop more every damn day
    First, took three days and over 9 hours wasted on hold for Adobe phone help - and finally got a guy on to help me register Photoshop CS6 - and he could not get it to register. Finally after a day & a half and hours of continually cutting and pasting from teh online computer to the main computer that does not hook up to the Internet I got CS6 to work.
    Then, I opened the Panasonic LX7 RAW images twice after downloading and installing Adobe Camera RAW 7.1 and 7.3 - and now the machine does not recognize the files and tells me to go to http://www.adobe.com/go/kb407111
    I went there and have downloaded the Camera Raw 7.1 and 7.3 four different times now and tried installing it - and Still can't open the damn files. I keep getting the same "photoshop cannot open this file" message and teh same referenc to teh above.
    How can I get this piece of Shiz to work???
    Oh - the name for ID above is after 22 minutes of trynig to find an name this program would accept.

    The first thing I would suggest is, in Photoshop, go to Help/About Plug-Ins and click on Camera Raw to verify what version is installed. There should only be one version listed, and listed only once. If there are more, then you need to get rid of the extras.
    The DNG converter is a program that will create DNG (digital negative) copies of your raw images. It takes all of the raw image data and copies it to a new file format. The raw data is unmodified, and the DNG file is a standardized and open documented file format. But the DNG converter will not list the actual files. You choose the folder that contains your original raw images, and then the converter will put the copies wherever you choose to put them. But if your camera is supposed to be supported by the latest version of Camera Raw, I don't know if converting will solve the problem. It won't hurt anything; your raw files are still intact.
    It would be helpful if you could describe your computer; operating system, how much RAM, a little information to allow the experts (of which I am NOT one) to help you isolate and solve this problem.

  • +++ Adobe Camera Raw - Frequently Asked Questions +++

    Q: Is my camera supported by Adobe Camera Raw (ACR)?
    A: Here is the list of cameras officially supported by the current version of Adobe Camera Raw and Digital Negative (DNG) converter. The page also provides links to the current version of ACR and DNG converter for both Mac and Windows.
    Q: what version of Camera Raw should I install?
    A: Photoshop CS6: see first question.
    Photoshop CS5: Camera Raw 6.7 Win | Mac
    Photoshop CS 4: Camera Raw 5.7 Win | Mac
    Photoshop CS 3: Camera Raw 4.6 Win | Mac
    Photoshop CS 2: Camera Raw 3.7 Win | Mac
    Photoshop CS: Camera Raw 2.4 Win | Mac
    For Photoshop Elements, Windows:
    Photoshop Elements 10: (See first question)
    Photoshop Elements 9: Camera Raw 6.5
    Photoshop Elements 8: Camera Raw 6.2
    Photoshop Elements 7 and 6:  Camera Raw 5.6
    Photoshop Elements 5: Camera Raw 4.6
    Photoshop Elements 4: Camera Raw 3.7
    Photoshop Elements 3: Camera Raw 3.6
    For Photoshop Elements, Macintosh:
    Photoshop Elements 10: (See first question)
    Photoshop Elements 9: Camera Raw 6.5
    Photoshop Elements 8: Camera Raw 6.2
    Photoshop Elements 6: Camera Raw 5.6
    Photoshop Elements 4.0.1: Camera Raw 4.6 ( 4.1 under Mac OS 10.3)
    Photoshop Elements 3: Camera Raw 3.6
    Q: What version of Camera Raw started to support my camera?
    A: This page: http://www.adobe.com/go/kb407111 lists when support for the raw files of your camera was added in Camera Raw. If the version listed is higher than the one supported by your version of Camera Raw, you first need to convert the files to DNG using the latest version of the DNG converter in order to open them in Camera Raw.
    Q: I do not have the latest version of Photoshop, how can I open the Raw files from my new camera?
    A: Only the current version of Photoshop will receive ACR updates that add support for the latest cameras. However, you can download the latest version of the DNG converter, and use it to transform your raw files to the universal DNG format. Camera Raw 2.4 in Photoshop CS and all newer versions of Camera Raw compatible with your version of Photoshop will be able to open the DNG files. Photoshop 7 and ACR 1.0 do not support DNG, therefore you will need to upgrade to the latest version of Photoshop.
    Q: When will the new update of Adobe Camera Raw be released?
    A: Adobe cannot comment on unannounced products, however, it is expected that ACR and DNG converter will be simultaneously updated 3 or 4 times per year (i.e. every 3 or 4 months).
    Q: What does "Unofficial Support" for a camera mean?
    A: Unofficial support means that Adobe's Quality Engineering department has not tested the support to the degree that they want, and thus cannot guarantee the results. So we don't include the camera in our official lists, and don't provide any technical support. Unofficial support means "use at your own risk".
    Q: How do I know that Adobe Camera Raw is installed correctly?
    A: For Photoshop CS customers, the most efficient way to ensure that you have the latest Camera Raw update installed correctly is to choose the Updates option from the help menu. For Photoshop Elements customers the best way to verify that the Camera Raw plug-in is installed correctly is to make sure it appears (only once) in the "About Plug-in" menu (see: Photoshop menu on a Mac or Help menu on a PC). The correct version is displayed when you pick its name and see its about box. If "Camera Raw" is not in this list, you have not installed it correctly.
    Q: Why is the profile listed in the Calibration tab showing a version of Adobe Camera Raw that's older than I am using ?
    A: What you are seeing is normal, and is due to the fact that the built-in profile for your particular camera model hasn't changed between that version of Adobe Camera Raw and the version you're using now. If you see the profile listed as "beta" then your camera has only unofficial support.
    Q: Why is there more than one profile listed in the Calibration tab of Adobe Camera Raw?
    A: The built-in profile for your particular camera model has changed since it was first supported. The profile shown by default identifies the latest version of Adobe Camera Raw in which the profile was updated. Other profiles in the drop-down list identify those included with earlier versions of Adobe Camera Raw, and are available in case you want to maintain compatibility with earlier versions.
    Q: My camera is listed, but Photoshop cannot read its raw files.
    A: Download and install the most recent update to Adobe Camera Raw.
    Q: Where can I download the latest version of Adobe Camera Raw?
    A: Adobe Camera Raw for: Macintosh and Windows
    Q: I am trying to replace my existing ACR plug-in with a more recent version, but cannot find ACR in my Photoshop/Plug-in/File Formats folder. Where is it located now?
    A: As explained in the "Readme", which can be found on the ACR download page, the correct location is:
    Photoshop CS2
    Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
    Win: \Program Files\Common Files\Adobe\Plug-ins\CS2\File Formats\
    Photoshop CS3
    Mac: /Library/Application Support/Adobe/Plug-ins/CS3/File Formats/
    Win: \Program Files\Common Files\Adobe\Plug-ins\CS3\File Formats\
    Note that "Common Files" is localized in non-english versions of Windows.
    Q: Why do I only see a small generic icon in Adobe Bridge instead of a thumbnail when I browse the folder containing my RAW files?
    A: Bridge occasionally has difficulty with RAW files, but this is usually because the user has installed ACR into the wrong location or browsed the folder prior to installing the ACR plug-in that provides support for their particular camera model. The fix for this issue is usually to make absolutely sure that ACR is installed correctly, then purge the Bridge cache. If you're in the habit of using the Distributed cache (Bridge 1.x) it would be prudent to manually delete the cache files from the folder containing your RAW files.
    Q: Whenever I open an image in Adobe Camera Raw a small explanation mark within a yellow triangle appears in the upper right hand corner of the image.
    A: This symbol indicates that a high quality preview is being generated by Adobe Camera Raw. It should disappear after a couple of seconds.
    Q: How do I turn off Auto Adjustments in Adobe Camera Raw 3.x?
    A: Open Adobe Camera Raw. On the Mac press Cmd+U or on the PC Ctrl+U. This keystroke combination toggles Auto Adjustments On and Off. Alternatively, disable the Auto Adjustments setting from the fly-out menu adjacent to the Setting drop-down menu. If you want the default to be Off for Auto Adjustments simply choose "Save New Camera Raw Default" from the fly-out menu adjacent to the "Settings" drop-down menu then choose Done.
    Q: What about Adobe Camera Raw 3.7 and newer versions?
    A: Camera Raw 3.7 no longer supports per slider auto adjustments. One Auto control at the top of the panel now sets the Exposure, Shadows, Brightness, and Contrast sliders to their auto values. The Default control at the top of the panel sets these same four sliders to their default values. The keyboard shortcut for the Auto control is CMD/CTRL-U.
    The keyboard shortcut for the Default control is CMD/CTRL-R.
    Double clicking on a slider to set that single slider to its default value.
    Shift double clicking on a slider to set that single slider to its auto value.
    Q: Why do I get the the following message: "Unable to create an .xmp sidecar file. The image settings will instead be stored in the Adobe Camera Raw database."
    A: This message means that Adobe Camera Raw is unable to write to the XMP sidecar file. Either the media is read-only (e.g. a CD), or you don't have write access to the folder containing the image, or the existing XMP sidecar file is locked.
    Q: I cannot see all the tools and buttons of Adobe Camera Raw.
    A: Set your monitor resolution to the minimum required for Photoshop CS and higher, i.e. 1024x768.
    Q: Where can I obtain a listing of Adobe Camera Raw keyboard shortcuts and modifiers?
    A: On the Photoshop online help file.
    Q: When I open my Nikon NEF files, all I see is the simple version of the raw dialog.
    A: You are running Nikon's plug-in, not Adobe's. Delete from Photoshop's plug-in folder and all subfolders all copies of the "Nikon NEF plugin". Nikon automatically installs this plug-in in up to two places inside Photoshop's plug-in folder, and both must be deleted. Otherwise it overrides the Adobe plug-in. An alternative to the deletion is adding ~ in front of the Nikon plug-ins names.
    Q: I installed the update. I can now open my raw files, but I still cannot see thumbnails in the file browser.
    A: Purge the file browser cache for the problem folder. Tools > Cache > Purge cache for this folder.
    Q: Is it better to resize my images in Camera Raw, or in Photoshop?
    A: The resampling code is fairly similar to (but not exactly the same as) the "Bicubic Sharper" resampling in Photoshop CS and CS2. It does not make very much difference which stage you do the resampling in. The exception is non-square pixel cameras (Nikon D1x and Fuji S2 Pro), for which it is best to upsample one size step in Camera Raw if you need a larger image.
    Q: What are raw images, and how do they differ from JPEG ones?
    A: Read this whitepaper (1MB PDF) written by Bruce Fraser for a concise answer.

    You can check compatibility yourself:
    1.  Go to this page to see the different releases:  http://forums.adobe.com/thread/311515?tstart=0
    2.  Navigate into the download link for the appropriate version of Camera Raw.
    3.  Follow the link to the ReadMe (e.g., http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_4.6_ReadMe.pdf).
    4.  Look to see whether your camera is supported.
    5.  If your camera is NOT supported, you can use the free Adobe DNG converter to create .dng files that your Camera Raw will be able to open.
    Photoshop CS6 is anticipated to be out in a few months, and Camera Raw is supposed to have a whole new approach, so a lot of us are excited about anticipating that.
    -Noel

  • Adobe Camera Raw 7.4 is now available for Photoshop Elements 11

    Adobe Camera Raw (ACR) 7.4 is now available to download for Photoshop Elements 11. More information regarding the additonal camera support added can be found at link here. For updating your camera raw plug-in in Photoshop Elements 11 follow the steps mentioned in blog post: http://blogs.adobe.com/pselements/adobe-camera-raw-7-4-is-now-available-for-photoshop-elem ents-11/

    Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.4
    Mac download click here DNG Converter 7.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

Maybe you are looking for