Lag between Sky +HD box and Sky Multiroom box

I've just started using a +HD box on our main TV and a standard non-HD Multiroom box in the kitchen. Yesterday we started noticing a time lag between the two of them whereas before we had the HD box, it was fine. Just wondering if anyone else has had this problem.

Nick180 wrote: ...........Just wondering if anyone else has had this problem. It's not a problem. There is substantially more data to be processed , from playout, through satellite, then down to your Sky box and tv, with an HD broadcast than with the same SD broadcast. Usually takes a second or two longer. As Mark says, it's perfectly normal.

Similar Messages

[SOLVED] Short lag between touchpad click/touch and action

Hi,
Even with FastTaps enabled in /etc/X11/xorg.conf.d/10-synaptics.conf, my touchpad has a latency (~50ms) when I click by touching it. If I click with the touchpad button, then there is no delay.
Is it possible to make it immediate?
I think the delay might be due to the double tap that wait for a response when a one tap occurs, but i might be wrong.
Here's my synaptics.conf :
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "AccelFactor" "0.0400"
Option "MinSpeed" "0.7"
Option "MaxSpeed" "1.3"
Option "FastTaps" "1"
Option "VertScrollDelta" "-111"
Option "HorizScrollDelta" "-111"
Option "HorizTwoFingerScroll" "1"
EndSection
Anyway, thanks for your help!
Last edited by Evan.h (2013-06-16 18:00:21)

Windows would be a good test to see if it is a hardware issue, but supposing Windows does work fine, it could also have a different configuration, or more reliable drivers. There's a lot of factors, but testing Windows would be a start anyway. There are synclient options that mess with delays, I just don't remember them off the top of my head.
Last edited by schmidtbag (2013-06-13 19:40:01)

BT Sport with Sky Multiroom

So the nice man I just phoned at BT tells me that BT Sport isn't available on sky multiroom. I thought he was kidding. I've got BT Broadband, (Unfortunately - Most reliable Internet connetion my left bum cheek) so the service should be free anyway. Alas, I even offered to pay for the additional box to be registered but apparently it can't be done. So can someone explain what the technical reason for this is? It's hardly an uncommon set up for a household to have more than one sky box, so surely this problem was not an oversight? I half expected it to be a money spinner for BT but for once I couldn't even pay you for your poor service.
In any case, you've given me the choice of watching the Liverpool game over your dreadful internet connection or the pain of watching Celtic with my dad in the living room. Saturday ruined.

legitimise_sailing wrote:
MartinH wrote:
legitimise_sailing wrote:
It's BT's choice not to offer Multiroom, not Sky. Sky do after all
If BT's excuse is that it's too expensive, they should levy a charge so they break even - simples.
It's not BT's choice. A commercial agreement is needed and one cannot be reached at a price that makes economic sense.
BTW "simples" just makes you sound like an idiot. Have you ever thought of trying to act and speak like an adult?
Of course one could be reached if BT had the will to do it. It would obviously cheaper than a full 2nd package which BT have also failed to offer.
BTW an ad hominem attack is the last resort of a lost argument
In this case it's just a matter of finding people who quote a puppet from a TV advert in the mistaken belief that it makes them sound clever or pithy, ever so slightly immature and shallow. You're one of about a million posters who do it across the web, there's nothing profound, wise, sassy, original, or witty about it.
A deal has not been reached because the negotiations have failed to produce a price BT are happy with.
That might change, but it also might not and people may find that this is one of those instances in life where stomping feet, posting stroppiness on forums and threatening to go elsewhere won't produce the result they want.
As for a second subscription, without the access to Sky's multiroom authentication system there's no way BT could be sure the second cards were being used in the addresses they're registered to. There's zip reason for them to take the chance.

I would like to sync Notes between my MacBook Air and the IPhone and/or IPad. I used to tick a box in Itunes (info), but for some reason it is no longer there. How do I go about doing the sync?

I would like to sync Notes between my MacBook Air and the IPhone and/or IPad. I used to tick a box in Itunes (info), but for some reason it is no longer there. How do I go about doing the sync?

The only way to sync Notes is through a mail server. If you don't want to use iCloud, you'll have to use some other mail account, or run your own mail server under OS X Server. The latter is a job for advanced users only.

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

Drag and Drop between two list boxes

Hi all
I am working over Drag and Drop .. i have to implement Drag and Drop between two list boxes .. both list box exist in same page ..each list box have number of rows.. please give me some idea ... as i am new for JSP and Servlet...
Thanks in advance
Regards
Vaibhav

Hi all
I am working over Drag and Drop .. i have to
implement Drag and Drop between two list boxes ..
both list box exist in same page ..each list box have
number of rows.. please give me some idea ... as i am
new for JSP and Servlet...
Something close to what you are looking for is Select Mover in Coldtags suite:
http://www.servletsuite.com/jsp.htm

TB 31.4 when compsing a message, has introduced a spurious blank line between the address boxes and subject box.

When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".

You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him.

HT204370 why is there a lag between sound and the film

can anyone help me my films in i tunes have a lag between the sound and the picture. They worked fine when i purchased them but have now developed this time delay, Very annoying when their lips move but out of time to thier spoken word.

Hey ben.brittain,
There's an article that helps troubleshoot video playback issues within iTunes for Windows 7. It specifically mentions audio that is out of sync with the image on-screen. You can check it out here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Cheers,
David

What is the box in mail app between the move icon and reply icon?

Hello,
Just started using mail in the new ipad and see an icon in the inbox on the left handside in between the move icon and the reply icon. What is it and what does it do to a file? I clicked an old email on it and it seemed to have stored it or did it delete it. Thanks for your help in this matter.

Do you mean the icons towards the top right-hand side of the Mail app ? Depending on what type of account it is it might be a trashcan for deleting an email, or if it's a Gmail account you may currently have it set to as an archive icon : http://support.apple.com/kb/HT4207
What is archiving : http://mail.google.com/support/bin/answer.py?answer=6576

Difference between cancel_flag IS NULL and cancel_flag ='N'

Hi ,
Please clarify Difference between cancel_flag IS NULL and cancel_flag ='N' in PO Headers .
Because from front end cancel check box is unchecked in abobe both the cases . We can see cancel check box status only in Help>Diagnostics>Examine .
Thanks in Advance
Kiran

Hi Kiran,
The is no difference between cancel_flag with 'null' and 'N' but cancel field contain Null if it is generated through auto create and it contains 'N' if Purchase order raised without PR .
I hope you understand.
Regards,
Sravani.M
Edited by: 855855 on Nov 9, 2012 5:49 AM

In ical, how can you tell the difference between a meeting invite and email?

When you send a meeting invite in ical, does the recipient receive a different icon in their inbox to differentiate from an email?

For service stock you can't tell the difference between a new iPad and a refurbished one. Both will come in a plain brown box with the same pattern in model numbers. If you mean between a refurbished one and one new at retail, then other than the obvious difference in packaging, I've read that the model number on refurbished units starts with the letter "F", though I've not confirmed that.
Regards.

Is it possible to run dual display monitors on a KVM switch between my mac mini and a PC desktop?

I have two 23" monitors utilizing DVI that I currently have plugged into my PC desktop. I'd like to purchase the mac mini and utilize the same monitors for both systems and switch back and forth between the two. So, I'm wondering if it's possible. The only two hangups I can anticipate is dual display capability on the mini (I expect that some adapter will be necessary), keyboard compatibility between the two systems, and finding a switch that will handle all the above. Any help would be greatly appreciated!!!!

I think this video could help you
http://www.youtube.com/watch?v=IYoC2teAbmE
Other question is the switch box, You will have eight income cables (4 video, 4 usb) and four output cables
http://www.showmecables.com/viewItem.asp?idProduct=10778
http://www.networktechinc.com/pdf/cat-kvmsplit-usb-hdmi.pdf

Can i establish wifi direct between lg smart tv and imac 10.6.8?

can i establish wifi direct between lg smart tv and imac 10.6.8?

In order to do that you will need an AppleTV, you can buy them refurbished from Apple for $75.00. I just got one and love it. I have a fairly large DVD library (about 400 movies) and music library (500 + albums), with AppleTV I can now stream that content to the the link to the refurbished unit is:
http://store.apple.com/us/browse/home/specialdeals/ipod/apple_tv
EDIT:Whoops I misdirected you. To stream content from the TV to the computer you will probably need a third party device like and Elgato box. I can only refer you to their website at: http://www.elgato.com/eyetv

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Eventing between Web Dynpro iView and regular DynPage iView

I have seen, done eventing between two dynpage iviews and two webdynpro iviewsHowever, and gone through "How to Use the Portal Eventing for Web Dynpro iViews". However, I have been trying to have a webdynpro iview talk to a dynpage iview but they just won't communicate. Is this even possible?
Ok basically I have a portal page in a popup window with no masthead and top level navigation. The page has two iviews - the top one being an iView that points to a webdynpro application on Server A, and the bottom one being a dynpage iview on the Portal Server B.
In the webdynpro iview, the code for when a button is clicked is
public onSomeAction(Event event) {
    WDPortalEventing.fire("urn:myUrn","eventName","value");
In the dynpage iview, the code i have for it is
myServ = (IEpcfToolbox) PortalRuntime.getRuntimeResources().getService(IEpcfToolbox.KEY);
myReceiver = myServ.getClientEventReceiver(request, "urn:myUrn", "eventName");
form.addRawText(myReceiver.getWrappedScript());
try {
    if (!myReceiver.isReceived()) {
        form.addComponent(createMainScreen());
    } else {
     form.addComponent(new TextView("event received!"));
} catch (Exception e) {
    form.addComponent(createErrorScreen());
I tried all the things I could think of but the receiving iView just won't get the event fired.
Can someone confirm that this should work? and correct me where I've done wrong.
Please help. this is very urgent. your help will be greatly appreciated. thanks in advance
PS. My environments are EP 6.0 SP2 and WAS 6.40 SP14

> hi,
>
> portal eventing works properly if all participants
> are in the same domain. Otherwise portal eventing
> g does not work. If the SAP J2EE
> Engine on which the Web Dynpro application is
> deployed is in another domain, you have to map the
> IP address of the SAP J2EE Engine to the domain name
> of the
> SAP J2EE Engine on which the SAP Enterprise Portal is
> running, by editing the configuration file hosts.
>
> regards,
>
> Ganesh.N
I am no direct access to the boxes so I can't try your suggestion. It really makes sense that eventing won't work if the iViews are on different domains. I know they are in the same domain but different subdomains.
Anyway, good news I got eventing to work with the mentioned set. I found that that the SAP Java EPCFToolbox API had a bug that kept throwing javascript errors when I tried to have the web dynpro iview fire an event and the SAP one subcribed to it.
I got around it but using the EPCF Javascript API instead.
Code:
response.write("<script>");
response.write("EPCM.subscribeEvent('urn:dla.telework', 'createPdf', doSomething);");
response.write("function doSomething() {");
response.write("window.location = self.location + '&eventReceived=true';");
response.write("}");
response.write("</script>");
So basically just output raw text through the response object and it just works.
On a similar topic, since eventing can only pass string parameters back and forth, I'm still looking for a way to pass other more complex Java objects between web dynpro and sap iviews. From what I haven't they don't share the same session object (which I thought they did). So basically I can't just stick stuff in the session and pull it down on the other end. I'm clueless right now. If anybody has some tips, plesae share. Thanks

Lag between Sky +HD box and Sky Multiroom box

Similar Messages

Maybe you are looking for