Lag Data / 4G in Columbus Ohio Area 6/8/2011

Just wondering if anyone else is getting lag in the Columbus area? My thunderbolt normally will zip along, but this morning, it's super slow even though it says it's connected to the 4G network.
I normally get on my Sirius / XM app in morning, but this morning it was so slow the app basically timed out. I'm able to load web pages but, it's spotty and slow. The SpeedTest app won't even work
I haven't heard any from Verizon about the network being down.
I Rebooted, toggled the 4G, did a dance, ect ect.

Hello br27125,
There are a lot of factors that we take into consideration when there are service issues. Location is one of the factors as well as the device being used. Below, I have some questions so I can better understand the root cause so I can customize a solution for you. If you would be so kind as to reply with the answers then that would be great!
How many bars of signal is displayed on the device in the problematic location?
Were you ever able to use the phone previous without any problem at the location in question?
Does you experience these issues indoors, outdoors, or both?
Do the dropped calls happens when making or receiving calls?
Is the issue with the same number when happening?
What part of the southwest Columbus, Ohio area? (zip code preferred)
Once you have provided answers to the questions then I can provide a solution for you. I look forward to your next posting.
Thank you...

Similar Messages

Any Contractors in Columbus, Ohio area?

Just had a call from a headhunter looking for a APEX developer to work for a contract project ( I am not looking for contract work, and can't relocate to Ohio at this time):
His contact info is:
William Roberson
Assistant Vice President
Mid West Regional Staffing
[email protected]
312-558-9500
Fax: 312-525-8076
Job description:
ID: 111292-1 Status:Open Submitted:12/6/2007 LOB:K - RETAIL FINANCIAL SERVICES
Summary Details Candidates Notes
Summary InformationSummary Information
Type: Contract-US
Labor Category: IT - US
Procurement Type: Staff Augmentation
Admin Cost Center: B-0805-013810
Billing Cost Center: B-0805-013810
Billing Cost Center Num: 0805-013810
Contractor Work Location: 02936 - 3415 Vision Drive
Billing Location: 02936 - 3415 Vision Drive
Request Name: CC-RPM Apex Development
Status: Open
Submitted: 12/6/2007 12:47:15 PM PST
Has Assignments: No
Position InformationPosition Information
Position: Applications Development - Data Warehouse
Position Code:
Qty: 1 !
Ant. Start Date: 12/17/2007 !
Duration: 5 Months 1 Day< 1 Week2 Weeks< 1 Month1 Month2 Months3 Months4 Months5 Months6 Months7 Months8 Months9 Months10 Months11 Months12 MonthsOther... !
Hrs/Wk: 40.00
VMO Owner: ALLENDER, WILLIAM !
Estimated Cost:
General InformationGeneral Information
Job Family Description: Responsible for the design, development, coding, testing, debugging and documentation of applications to satisfy the requirements of one or more user areas. May include hands-on new development as well as support, maintenance or enhancement of existing applications. Works closely with client management to identify and specify complex business requirements and processes. Researches and evaluates alternative solutions and makes recommendations.
Dress Codes: Available Selected
Business AttireBusiness CasualCasual
Rate DetailsRate Details
Rate Card Class: Applications Development - Data Warehouse
Region: Ohio ArizonaCaliforniaDC/VA/MDDelawareFloridaIllinoisMassachusettsMissouriNew York/New JerseyOhioTexasCanada
Level: Level 5 - Advisory Level 2 - NoviceLevel 3 - IntermediateLevel 4 - LeadLevel 5 - AdvisoryLevel 6 - Senior Manager
Rate:
Other Estimated Expenses: Type Amount (e.g. 2000)
No items to display.
SkillsSkills
*Either skills or additional skills are required Skills: Skill Required Importance Level Last Used Experience
SQL Yes 2 Intermediate 7-8
Oracle Yes 4 Intermediate 7-8
PL/SQL Yes 3 Intermediate 7-8
Additional Position Requirements: APEX Development Experience required.
*Skills have been configured as Required on the Request Type, Skills or Additional Skills is required.
Background ChecksBackground Checks
Background Checks: Name Required at
Due Diligence Offer Acceptance
AttachmentsAttachments
Attachments: Attachment
No items to display.
Additional InformationAdditional Information
Intent to Hire: Yes
Roles and Responsibilities: Design, Develop and maintain applications for Customer Care reporting needs.

My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Network Coverage Columbus Ohio

I received a text indicating enhancements were made in Columbus, Ohio. Exactly which area of Columbus benefits from this enhancement? I have noticed that I often get a "No Service" status on my phone when in my house. If I go outside, I have spotty coverage sometimes. Wasn't a problem in the past. No changes have been made on my part - same phone and plan since I became a customer over a year ago.

Hey
I’m sorry to hear you are experiencing poor service in your area. I’d be happy to help! I would recommend checking out our AT&T Mark The Spot app to capture the location of areas where there is little or no service. This information is then used to plan future network improvements. We realize you won't be able to report network issues from the app without wireless service but you can mark a place on the map and report the issue when service has been restored or you can use Wi-Fi. Visit the app store for your device manufacturer and download the AT&T Mark the Spot app.
Mark the Spot is free for AT&T customers to download:
Get Mark the Spot for iPhone
Get Mark the Spot for Android
Get Mark the Spot for Windows Phone
Get Mark the Spot for BlackBerry
For more information on using the app please see here.
I hope this helps!
Charise

My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

My iPhone will
not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

Try resetting your network settings.
Settings>Genenal>Reset>Reset Network Settings.

How can you manage data usage when cellular data is off, but you are using WiFi where your WiFi provider charges for data use?

I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?

Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

RA data only updated in Controlling Area currency..

Hi Guys,
When we run the Results Analysis for WBS Elements, we are getting the message " RA data only updated in Controlling Area Currency ".
How can we make this message gone or why is the system updating only in CO Area Currency.
Thanks
Srik.

Hi,
The company code currency for this WBS is different from the Co Area Currency assigned in the Co Area definition.
However still system is updating only in the Co Area Currency.
Thanks,
srik.

Issue dates of only parent publications are getting reflected in a subscriptions order.

Dear All,
Could you please help me with a development pertaining to Issue dates of only parent publications are getting reflected in a subscriptions order.
Synopsis:
An offer has been created by me using combination of two publications namely A and B.
The Combination has been defined by creating a mix type (JDMPS0) by keeping A as a parent publication and B as a child publication.
When a subscriptions order gets created for this combo offer, the order delivers the issues of both the Publications as per their respective issue dates. The deliveries of the same can be observed in table (JVVLFZUO)
The Issue crops up when I wish to terminate this order over the issue dates of the child publication. This is because issue dates of only parent publications are getting reflected in a subscriptions order (JK03).
Could you please suggest a development where in I'll be able to view issue dates of all publications.
Regards,
Himanshu

Hi,
Please sit with your PP Consultant.
Muzamil

Copy Data from Non CBF Planning Area to CBF Planning Area in APO DP

Hi Experts,
I am working in APO implementation in an automative client, here we have material type Vehi and configurable material.
I have done my forecasting in Non CBF planning area . Now I want to copy Key figure of final conenses forecast which is in non - CBF planning area to a CBF planning area .
Can anybody has worked on similar scenario or worked in copying data from a non - CBF planning area to CBF planning area.
Looking for your valuable inputs
Thanks and regards
Kapil

Hi Kapil!
We have the same need mentioned by you "Copy Data from Non CBF Planning Area to CBF Planning Areau201C.
We obtained the source data, but can not do to write the same in CBF area.
You managed to make the recording of such data in CBF area? How did they do it?
Thanks and regards.
Clelidon

Data source for a planning area

Hi Experts,
I have created a data source 9AZDP_APAP for my planning area ZDP_APAP. When I'm creating this data source, SAP itself prefixing my datasource name with '9A'.
I'm wondering is this ( Starting the data sorce name with '9A') with in our system only or with every system.
If it is with every system then is there anyway I can override this.
The reason why I'm asking this question is my data source is giving error " M version is different from A version' in RSA1, when I'm trying to activate my datsource I'm getting authorization error. When I contacted my security people on this they are telling I'm not following the naming standards. They are telling that the data source name should start with Z.
All the inputs on this will be highly appreciated.
Regards,
Brahma Reddy

Hi,
Generating a data source on a planning area in APO is really very helpful function we have. this will help us to save a lot lot time to generate cube/rules/source.
Definately, when system generates the data source it will follow its own logic "9A" which we can not change.
I guess you create a DataSource manually if required, where you can follow your own logic, but that is not really consistent as system generates. becuase when it generates, it will check for time char and all based on storage bucket profile and generates.
Hope my information will help you in understanding the importance of auto generation of data source
Yarala

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Error AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)

Hi experts,
We upgraded to ECC6 from 4.7 version last month.
For some assets we have start deprecation date filled for area 60 with deprecation key LINV.
We would like to modify deprecation key to 0000 but we have error "AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)"
Have you any idea to resolve this issue.
Thank you in advance
Kind Regards.

Dear Shankar
here is what i have in transaction
001     01/01/02/02          01     01     02     02
002     01/01/01/01          01     01     01     01
003     01/06/02/02          01     06     02     02
004     06/06/02/02          06     06     02     02
i do not anderstand any thing in this transaction
Can you help me resolving this issue?
Thanks in advance.
Kind regards

Source Data from OLE DB staging area to Import for FDM

Hi ! Please help me out on Integartion of Oracle to FDM
I want to load data into FDM directly fom Oracle database through an Integration Script.
How to take Source Data from OLE DB staging area to Import for FDM?
My main intension to import data for FDM from Oracle DB where there is no manual intervention and it could be safe. We are taking Actual data through Oracle Apps and keep that data into Oracle DB for further process.
FDM can also import data from Oracle Data Base Source means I need procedure/script to import data from Oracle data base staging area where we keep some data for HFM to enter the data on monthly basis.
OLEDB----->Import FDM-------> Export to HFM (Procedure\script without manual intervention)
Here in OLEDB data comes cumulative from Day or week to Month basis for inputing to HFM applicaiton.(Actual)
Regards and Thanks.
Edited by: user3557428 on 10-Dec-2008 00:05

You will want to look at the FDM Admin Guide
Look for Integration Import Scripts
There are a few pages that cover what you are trying to do. If you do not know VBScript it might be benefitial to tap someone who does or brush up on ADO.
Hope this helps
Wayne Van Sluys
TopDown Consulting

Lag Data / 4G in Columbus Ohio Area 6/8/2011

Similar Messages

Maybe you are looking for