Lag in Auto Delete functionality

Is there a way to have a Podcast Update automatically precede an Iphone Sync? I'd like this to happen so that when my Iphone syncs (which I do automatically upon docking), that it 1) gets the most recent podcasts and 2) deletes anything that I've already listened to. Right now, the sync happens first, then the update happens some time within the next hour. There is no automatic sync again, however, so unless I do this manually, I end up potentially behind on the latest updates, and more annoyingly, with podcasts still on the Iphone that I've already listened to. Those will then go away automatically with the next sync, but it's always one cycle behind this way.... Is there a solution to this other than re-syncing again manually? thanks, Chris.

I guess you are in the wrong forum. Sounds like you are using fusion applications. You should use an internal forum.
Timo

Similar Messages

Podcasts no longer "Auto Delete"

Hello,
Wasn't sure which forum was best for this but just wanted to voice my frustration with Itunes 7.7 and the fact that my podcasts no longer "Auto-Delete" after being played. I checked my settings for each podcast and they are still set to "AUto-Delete". If anyone has any suggestions, please respond.
Thanks!

The auto-delete functionality in iTunes refers to deleting the podcasts from your computer. The control for removing played podcasts from the device is on the podcasts tab available when the device is attached.
Whether or not podcasts are auto-deleted from you computer is based on the podcasts settings in iTunes. The settings button is on the bottom of the podcasts page (next to the undelete button). In the popup window under "Settings for:", select "Podcast Defaults" to change to default for all podcasts, or a specific podcast that you want to behave differently from the default settings.
When choosing "Podcast Defaults", the two selections at the bottom of the window will be unlocked. When choosing any single podcast, uncheck the "Use Defaults" checkbox to unlock these fields.
Changing the selection "When new episodes are available:" will affect how many (zero, one, or all) podcasts to download.
Changing the selection "Episodes to keep:" will affect which, if any, podcasts are auto-deleted.
As to removing podcasts from the device, this changed for me with the most recent update to the iPod software. Podcasts are removed from the iPhone if they have been played, but they remain on the iPod until they have been deleted from iTunes. I have not experienced a case where a podcast persisted on the device after it was deleted from the computer. I am hopeful that Apple will fix this with the next iPod software update.

Managing auto delete

I'd like to update my Ipod with new podcasts, but I don't want to auto-delete shows that the IPod thinks I am done with. It wants to delete them on the IPod and the hard drive. I looked at the auto-delete function, and it seems that "allow auto-delete" is the default. Is there a way to change the default setting? I need more control over keeping my media than apple allows.
When I went to the main header of a podcast, I could Control-click and select "do not auto-delete" when it had podcasts in it. But not when it was empty. I am afraid that new podcasts will also need to be protected at every update.

Select Podcasts on the left side of iTunes.
Click Settings at the bottom of iTunes.
Select *Settings for: Podcast Defaults* in the drop down
Set the drop down for *Episodes to keep:* to *All episodes*.
To keep podcasts on the iPod, select the iPod in iTunes then click the Podcasts tab across the top.

Podcasts are auto deleting

Hello, My podcasts are auto deleting but I have selected 'Do not auto delete' and keep all in the settings, I'm getting fedup with having to download them again

I found a solution at least working for me on my MacMini which is not synced with my iPhone.
As iTunes on my MacMini does not update every day I sometime manually add missed episodes by pressing the little "Get" button. It turns out that this manual action resets the "auto-delete" function for this podcast. Thus the auto-delete for a particular podcast is only remembered without any manual "interference".

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

Disable auto import function?

I want to disable the auto import function in iTunes, but can not find the setting.
My problem is I download a new song into a temp directory, immediately iTunes opens and imports the song into the iTunes library. I DO NOT want iTunes to import the song at this time. I want to move the song to my MP3 folder first.
This is a real pain because I have to first delete the song from iTunes then move the song file, then import the song again from the MP3 folder. If anyone knows a way around this please let me know.
Thanks!
na Windows XP
na Windows XP

Edit/preferences/import uncheck "show import dialog when..."
Charlie...
http://www.chocphoto.com

Delete function stays at grey

Help, when attempting to trash a track in Itunes the delete function found in the Edit box will not highlight so unable to get rid of unwanted tunes

hey i just recently had the same problem with my girlfriends macbook (today), same specs and everything, we were having problems with leopard (random lagging, safari acting up etc.) apple store recommended a archive and reinstall, didn't help, then recommend a erase and instal off the leopard disks, we back up the computer with time machine and after the erase we used migration assistant to transfer everything and had to step out, came back the computer was asleep/unresponsive, we restarted it and just got the grey screen nothing else. tried to open in disk mode, nothing. tried to boot up off the instal disks that came with the computer nothing. (all this was on the phone with apple care) went through all the steps to start up, hold down c, hold down d, hold down option, etc. nothing happened same grey screen. the guy said it MUST be a hardware issue take it in to apple to get fixed, were going that tmw we'll see what they say happened.. so taking it in might be your best bet or getting a new drive.
Message was edited by: Gr3gory11

Old podcasts were auto deleted from hard drive

I download a handful of podcasts once a week and keep a regular backlog on hand to listen to when traveling. This week, all of my archived podcast files -- looks like anything older than one week -- are gone. They were still listed in iTunes, but the files were deleted from my hard drive. They aren't even in my recycle bin, so I know I didn't delete them.
I assume this happened during my latest iTunes update (yeah, I know, this probably covered in the encyclopedic user agreement), but I'm curious if anyone else has experienced this and has a solution. I did spot the Allow/Do Not Auto Delete option, which I'll now use every time.
Thanks.

However I have a couple of grayed out folders with a question mark and "inval..." that are non-functional and nothing happens when I choose "remove".
Try rebooting your computer. In previous instances, that sometimes caused these phantom folders to disappear from Lightroom's folder pane.

Yoga 13: HID Sensor Collection : Auto-rotate functionality

Hi Guys,
I bought the Yoga 13 with Windows 8 but the non pro version. I wanted the pro version on so I can connect to a domain so I did a clean install - where I deleted the partition with the old OS.
Everything went great and all drivers that were are on the other partition that I left alone installed fine.
Here is the problem: I noticed that the auto-rotate functionality no longer works. After doing some research I found that the HID Sensor Collection is what controls this. If I look at the device manager I can see that their is a exclamation point next to the HID Sensor Collection Driver along with the Light Sensor driver.
They both give me the error:
This device cannot start (Code 10).
The process hosting the driver for this device has terminated.
I tried uninstalling and reinstalling the driver - this didn't help.
I've tried searching for this driver online - no luck.
I tried using the "update driver software" and it says: Windows has determined that your driver software for this device is up to date.
Any ideas how I can get the HID Sensor Collection working?
Thanks for your help!
Solved!
Go to Solution.

I had excatly the same problem after Windows 8 Pro N 64bit install, the device manager showed HID Sensor Collection and Light Sensor with exclamation points.
I found out that this might have something to do with Windows User Mode Driver Framework, Windows Media Player contains and utilises it. As Windows 8 Pro N didn't contain Media player, I downloaded it as Media Feature Pack from http://www.microsoft.com/en-us/download/details.aspx?id=30685. After the install HID Sensor Collection and Light Sensor were fine. Also Simple Device Orientation Sensor appeared.

Text - Auto Scroll Function

Does my iPad have an Auto Scroll for Safari?
Is there a "hidden" feature that I can use for reading a text with Safari?
An automatic scroll (activated by an command) would be a comfortable function.
I don´t want to use an App.
Thanks

Tap and slide up to scroll. Tap and flick up to move faster.
There is no way I know off to have the screen automatically scroll.
The iPad has many security features to prevent malware attacks. One of these is called Sandboxing. This keeps each app in its place and prevents apps from altering the system resources or other apps. So no other app will provide the auto scroll functionality to Safari.
You can make suggestions to Apple here:
http://www.apple.com/feedback/

Text-input component with auto-complete functionality for mobile

Hey guys,
I wonder if there is a text-input component with auto-complete functionality optimized for mobile development with AIR like the one that Android provides natively as you can see here http://developer.android.com/reference/android/widget/AutoCompleteTextView.html and here http://developer.android.com/resources/tutorials/views/hello-autocomplete.html.
At least I didn't find it in the latest SDK and I think such a component is pretty standard nowadays. Or did I simply overlook it?
Thank you guys for any advice.
Regards,
Thilo

Hi relaxtraja,
thanks for your reply!
I knew that there are a lot of auto-complete scripts on the web. What I was hoping was, that Adobe provides an officially supported auto-complete component optimized for mobile as part of the SDK (like in the Android SDK as I pointed out), but that doesn't seem to be the case. It's sad, because it's an essential part of modern UIs in mobile applications.
I've already created an auto-complete component by myself based on Spark components and I will end up using it. But I will have to optimize it for mobile applications beforehands. I just think something this essential should be provided by the SDK.
However, thanks for posting!
Regards,
Thilo

Auto delete everything but specified folder contents from txt file

Hey Guys,
I am brand new to using Powershell (like 48 hours into using it for work) and I've run into a bit of an issue. I've only taken a programming concept classes so some of the stuff makes sense to me but a lot of it is new. Basically I've made a
script that automatically deletes any files over X amount of days. My next step is to have an exceptions text that will have a list of folders that should not have its contents deleted. This is what I have so far.
$Date= Get-Date
$Days = "7"
$Folder = "C:\publicftp\users"
$LastWrite = $Now.AddDays(-$Days)
#----- getting DO NOT DELETE listing from TXT ----#
$Exceptions = Get-Content "c:\exclude.txt"
$Files = Get-Childitem $Folder -Recurse -Exclude "c:\exclude.txt" | Where {$_.LastWriteTime -le "$LastWrite"}
foreach ($File in $Files)
if ($File -ne $NULL)
Remove-Item $File.FullName -Exclude $Exceptions | out-null
I've seen a lot of threads that show how to auto delete contents or how to exclude specific file types but I haven't seen an answer to my particular problem. Any help would be greatly appreciated! Thanks!

Hi Rabbot,
The script below may be also helpful for you, and uses the -whatif parameter in Remove-Item cmdlet, which doesn’t actually remove anything but simply tells you what would happen if you did call Remove-Item.
$Exceptions = @()
Get-Content "c:\exclude.txt" | foreach{
$Exceptions += $_} #store the exception file to array
$Folder = "C:\publicftp\users"
$LastWrite = (get-date).adddays(-7) #over 7 days.
$Files = Get-Childitem $Folder -Recurse | Where {$_.LastWriteTime -le $LastWrite} #filter files which over 7 days.
Foreach ($file in $files){
if ($Exceptions -notcontains $file.fullname){ #if the file is not listed in the exception array.
Remove-Item $File.FullName -whatif} #use -whatif to test
I hope this helps.

How I can delete add-in in windows 8.1 ,I see only enable and disable function but I don't see any add-in delete function

hi,
how I can delete add-in applications in add-in applications section , I try to delete one but I don't see any delete function, I see only enable and disable function in the manage add-in applications wizard.
thanks
johan
h.david

Hi,
If you want to remove the add-ins of Office 2010 programs, you need to remove it from control panel.
For example, if you use Excel, please try to follow the link to delete the add-ins:
http://office.microsoft.com/en-us/excel-help/add-or-remove-add-ins-HP010342658.aspx
If I misunderstand something, please let me know.
Regards,
George Zhao
TechNet Community Support

How do I delete documents from my iPad that were added when it ran regular Acrobat, now that it has switched to DC? The docs are not on the cloud, and DC does not seem to have a delete function for non-cloud docs.

I use an iPad. It automatically switched me from old-fashioned Acrobat to DC. How do I delete docs that were put on my iPad with the old Acrobat? They are not in the cloud, and DC does not seem to have a delete function for them.

Hi,
By default, Acrobat DC for iOS displays recently viewed files. You need to switch to other file location (such as Local, Document Cloud, Creative Cloud) to delete, rename, move, or duplicate files.
You can switch to Local, if you would like to see the files and folders that are locally stored on your iPad.
Would you take a look at the following document to see how you can switch to other file location and delete files?
How to manage files in Acrobat DC for iOS
Please let us know if you have additional questions. Thank you.

N95 & Auto-Rotate Function in V21.0.016

Wife & I both have new N95's RM-159 from 3.
Firmware Version is V21.0.016 as mentioned in subject line.
What neither phone seems to have is the auto-rotate function. After hours of searcing I've been unbale to find out why with this version of the firmware this isn't supported on these phones. Under Display settings no mention of auto-rotate. I've checked software updater & am told the FW is the latest revision.
Do I need to install the accelerometer plugin to get this function to work as you have to do with rotateMe(c)Samir?
Any help would be appreciated before I ring 3 customer services and ask them why it isn't supported.
TIA.

Your phones are normal.
The N95 doesn't have that function as part of it's firmware. Only the N95 8GB has had this feature added in the v20 firmware.
The firmware on the N95 is not the same as the firmware on the N95 8GB.
It is rumoured that the feature will be in the next firmware release for the N95 which is due in the next few months.
So the only way to get auto rotate on the old N95 is to install a program like rotateme.

Lag in Auto Delete functionality

Similar Messages

Maybe you are looking for