Lag time in texting

I have the iphone 5 I have updated my ios 6.0.1 I noticed that there is a lag time when I am texting or writing e-mail. I have tried turning the phone off and back on but it did not help. The delay is still there ...I am not a fast texter but there is a one to two second delay between letters.. also my iphone is a 32 gb and I have only used half of the storage memory.. so it is not the memory space that is the issue.. is anyone else having this issue, what can I do to fix it. Do I have a malfunction phone?

Close all apps from MultiTasking and make a Reset.(Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.)

Similar Messages

Pages Slow - Long Lag Time

I'm importing a Pages document that I created on my Mac Mini at work to edit on my iPad 2. I'm having a problem in that there is a terrible lag time as I edit -typing, deleting, adding text, etc. I can push 5-10 keystrokes before anything actually happens in the document.
This is very frustrating. Can anyone provide any answers?
Thanks!

I now have iPad2 (A5 dual 512MB ) and iPod4 ( A4 solo 256 MB ), both loaded with iwork 1.5 and iOS5 . Let me report :
I think Apple accidently have optimized iOS5 and apps too agressively for the A5 processors of ipad2 and iphone4s. - ipad1, ipod4 and iphone4 run on the A4 chip.. and these are the devices that lag the most.
My keyboard is set to german plus additionally 2 international keyboards, so I can switch input characters when typing.
From what I see : on pad no typing issues so far - all can be left as it is.
iPod had severe issues in typing. SO I started digging around ( I even restored iOS on it it, but no cure ).
To make a long story short -- in iPod4 it helped succesfully to
disable the auto-completion and auto correction features in the keyboard settings and do a reboot:
where you can shorten often used phrases like: "otw" = "on the way" - I hope you know what I mean. Delete them all. Pages seems to lag on the iPod in such a way that it tries to foresee what I am going to type, "thinking" if it is a sentence or a phrase and if it needs correction.. The A4 cpu ( same as in iphone4 ) seems a bit overloaded with this. And to make things worse the tight memory of the iPod adds to the bad performace. The iPad2 has a faster processor and double the Ram ( this would match also the iphone4s hardware ) , and like I said the issues there are non-present for me on the pad.
Additionally it helped to limit spotlight search radius, so that it not constantly monitors changes in the device ( apps,contacts and music only for me - as these do not change that often and with a one time index it is done).
iOS5 is buggy in very few features, but there heavily. The high cpu/memory usage, the fast battery draining are the worst. I positively see the 5.0.1 update coming soon to adress this. Reports from Developers and a vague anouncement from Apple to adress "battery life" soon indicate there is help on the horizon.

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

Go to settings > messages > send & receive
check or uncheck the correct phones numbers and/or email addresses

How to load date and time from text file to oracle table through sqlloader

hi friends
i need you to show me what i miss to load date and time from text file to oracle table through sqlloader
this is my data in this path (c:\external\my_data.txt)
7369,SMITH,17-NOV-81,09:14:04,CLERK,20
7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
7566,JONES,02-APR-81,09:24:10,MANAGER,20
7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30my table in database emp2
create table emp2 (empno number,
                  ename varchar2(20),
                  hiredate date,
                  etime date,
                  ejob varchar2(20),
                  deptno number);the control file code in this path (c:\external\ctrl.ctl)
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>any help i greatly appreciated
thanks
Edited by: user10947262 on May 31, 2010 9:47 AM

load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)Try
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>
That's not an error, you can see errors within log and bad files.

LONG lag time switching from other programs to Flash

(Intec-Mac - OSX - 1.5 GB RAM)
Has anyone heard of this before? Any time I switch from any
other open program to a project in Flash, I get a super long wait
time before I'm able to work with Flash again. The lag time
only happens when switching to Flash (I get the spinning
ball of death while the Flash menus load again -EVERY time!)
This happens no matter if I have just Flash open and I'm
switching from the finder back to it or if I have 15 programs open
at once...
It is super frustrating and slowing down my workflow between
Flash and any other programs! I just uninstalled and reinstalled
hoping it would help but got same result - Any help?

Your best bet at this point in time is more RAM, since the
Flash IDE on
mac is only PPC at this time it runs emulated in Rosetta on
Intel macs,
and I've noticed swap times can be quite slow, this is not
unique to
Flash in my experience, it happens whenever I swap in a
resource
intensive app. Parallels is another prime example - and it is
intel
native.
Adobe engineers appear to have a new found love of the Mac,
so we can
only hope the intel native version ships it will be super
zippy.
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

Syncing video output to the specified lag time (ms) of your monitor

Hey guys and lassies, I've got a question that I've been thinking about a lot, and I've looked around the web without finding a good answer, so hoping to get edumacated in the subject here!
I do a lot of video work in Premiere Pro CS6 where I want to be absolutely sure that I have perfect (or as near perfect as possible) synchronisation between video and audio. I'm building a new editing rig now and I'm wondering about monitors. What has me pondering at the moment is the different lag times the various screens have. Some of the TN screens are really fast, and some of the various kinds of IPS-screens are a lot slower. Maybe I'll use a TN for working and an IPS on the side for previewing and getting colors right. Is there a way to make sure that whatever lag time your screen has, be it 4ms or 40ms that you know that what you're seeing and hearing is actually IN SYNC for real, and not just because it synchs with your monitor? Can this be specified in the output settings anywhere?
I know that we're only talking about a frame or so here or there, but it's still something I'm really curious about and think would be interesting to find out. I've got a bad case of perfectionists syndrome. Thoughts on the subject?

i dont know of any programs or devices that can tell the report the delay from an external monitor. i guess if you really wanted to find out you could video record some test footage onto a camcorder, then bring that into premiere and look at the sync sounds on the timeline vs the video frame to see how far out it is. you would need high fps to really get accurate though and still may not be a good way to figure this out...
most people cannot tell delay over 100ms. so if your monitors are 4ms or 40ms and that is the limit of total delay vs audio it should not be noticeable. if it is noticeable and the footage is in sync on the timeline (frame vs waveform), you can try to compensate with an audio vst delay plugin (described below). just load up some sort of syncpop test footage in premiere and eyeball it to adjust the delay, to get an acceptable sync in playback on your monitors.
you can add a delay vst to the master channel, set it to zero dry, 100% wet and set the delay by milliseconds to get the desired result. the analog delay that is built into premiere might work, just have to double click on its name after adding to get to the controls. i haven't tested this, but this should be easy enough for premiere to handle the delay vst. if you need to add delay to the video this route may not work. i think there are some audio delay vst that get into negative delay but requires the host application to accept it.

\n is not working by the time writing text into file ...

Hi,
I am reading each line from file and writing into another file ...
It is writing continously in the file even if i use \n for new line ...
Why "\n" is not working by the time writing text into file ...
Here is my code:
import java.io.*;
import java.net.*;
import java.util.*;
public class Test11{
private BufferedReader data;
private String line=null;
private StringBuffer buf= new StringBuffer();
private BufferedWriter thewriter=null;
private File file=null;
private FileReader fr=null;
private String inputLocation="c:\\test14.txt";
public Test11(){ }
public void disp(){
try {
file=new File(inputLocation);
fr = new FileReader(file);
data = new BufferedReader(fr);
while ((line = data.readLine()) != null) {
buf.append(line + "\n");
String text=buf.toString();
thewriter = new BufferedWriter(new FileWriter("c:\\test15.txt"));
thewriter.write(text);
buf=null;
thewriter.close();
} catch(IOException e) { System.out.println("error ==="+e ); }
public static void main(String[] args) {
Test11 t=new Test11();
t.disp();
System.out.println("all files are converted...");
I used "\n" after reading each line .. i want output file also same as input file ... how do i break each line by the time writing into text file .. "\n" is working in word pad but now working in notepad ... in note pad i am getting some thing like rectangle insted of "\n" ....
Any help please .....
thanks.

\n works just fine, and every text editor in the world except Notepad understands that it is supposed to be a line-ending character. You don't have a problem, except in your choice of text editor. If somebody is forcing you to use Notepad then you'll have to output "\r\n" instead.

IPod HD Lag times, this is crazy

I've recently upgraded from a 4GB Silver iPod mini, a HD based iPod and I've never had a problem with the lag times between choosing songs or skipping back/forward through songs.
But over the past 2 weeks of owning my iPod 5G 30GB I've become more and more unhappy with the apparent lag times when just trying to listen to a tune, plus I think I've found a bug in the 5G iPod (which I will list in a seperate topic).
When I select: Artist > Destiny's Child > #1's. The song will start playing, but the lag time between clicking the first track and it playing is around 3-5 seconds, you can hear the HD spin up, and it appears to lag on the Artwork a bit.
But then I clicked Skip 5 times, and counted the time until the iPod would play the track. 10 seconds! No word of a lie, you could hear the little HD click and whirr inside the iPod. It took ages to skip, and another age to bring up the Artwork.
I am hoping that someone can tell me if this is "normal" behaviour for the 5G or if there is a HDD problem here? (Could 30GB 5G owners please try the afore mentioned tested and get back with some times?)
iMac G4 Flat Planel Mac OS X (10.4.3)

Perhaps your problem is Fat32.
Mine is formated HFS+, since I use Macs, I don't
notice lag anywhere near what you guys state.
Just a thought.
During my time mucking around with this I have noted that the Mac format is much faster! I also find that it takes about 30 seconds for the iMac to recognise the iPod when it's connected to the USB 1.1 port and using FAT32, whereas using HFS+ the connect time is about 5-10 seconds. It appears that OS X likes to see it's native drives a lot faster than FAT32.
I think my times are generally accurate, my tag carrera wristwatch generally keeps time ok.
The reason why I find these times so long is I had a 4GB iPod mini. Whilst the HDD is smaller, it was a lot faster with it's seek times. My little mini is just as fast to skip tracks as a workmates 4GB nano! So coming from a little HDD to a large HDD I don't really expect the lag times. But it appears to be a way of life with the 5G and I can put up with that 'cause I can watch Lost on that little thing.

Why am I experiencing long lag times after installing Mavericks?

I just upgraded from Snow Leopard to Mavericks on my Mac Mini; Why am I experiencing long lag times?

Not enough free disk space can cause the lag times...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
Do you have anti virus software, MacKeeper, and CleanMyMac installed?
Checked the disk lately?
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important files first before using OS X Recovery.

Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

I am having incredibly long lag times when working with effects in Premier Pro CC 2014. Like 60 seconds or more. This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point).
I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3.
I have seen that some people are having different versions of the same problem. I do have RedGiant plug-ins, but I am not using any of them in this project. The Red Giant plugs (again, not being used in the project) include MOJO and Universe. The previous version most certainly did not work like this. Any ideas? I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences. Still having same problems.
A specific example is I have an interview shot. I add brightness and contrast. Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays. I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect. Same deal -- ridiculously long times for effect changes to take place.
Does anyone have any clues as to how to fix these problems?
THANKS FOR ANYONE'S HELP!!!!!!!

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Every time I text my wife's I phone it sends the same text to me.

I share an apple account with my wife. Every time I text her I phone from my I phone I get the same message sent back to me.

JujufromAr wrote:
I share an apple account with my wife. Every time I text her I phone from my I phone I get the same message sent back to me.
When you use the same AppleID to setup iMessage, you both end up sharing the same iMessage account. The cleanest solution to your problem is for one of you to get another AppleID and use that for your iMessage, thus completely separating eachothers iMessage accounts.
Each of you can have as many AppleIDs as you wish (all you need is a unique primary email for each one, using free email accounts, for example). And, you can use a different AppleID for each service that Apple offers - iCloud, iMessage, iTunes, the App store, these forums,...
So, you can both use a common AppleID for all your purchased content from iTunes and the App store, but use different and unique AppleIDs for iCloud and iMessage so those accounts are not shared.

Why do I get a message from my email every time i text?

I recently activated my iCloud account on my phone but now I get an email repeating the same thing I text. This happens every time I text someone with an iPhone. Is there a way to turn this off?

Settings > Mail. Contacts, Calendars > scroll down and change "Always BCC Myself" to OFF

Switching Layers lag time

It look like Adobe support is on vacation. This is my thrid posting with no reply, but there is always hope.
My last issue is with the Configurator panels loaded. When switching layers there is a noticable lag time. This is also true with the "Configurator Ps CC Styles" example panel. Once again when these panels are closed and photohop restarted, there is no lag time in switching layers and from my previous post, the tool shortcuts work as expected (they do not switch back to the original tool as when the panels are loaded).
I am on an iMac OS 10.8.4.
Photoshop CC
When I do a Safe Boot, all the panels work as they should with no problems with the tools or with the layer switch lag.
Hopefully someone will be back from vacation soon and help me with this issue.
I see in a previous post that someone on windows was having the same problem.
I want to beable to put my panel creation on Adobe Exchange, but don't feel like I can until I know what causes this issue.
Thanks - Sam

The problem has come back on my Mac again and the fixes I did before no longer eliminate the lag time ore the shortcut tool switch. I see in past posts that his has been a requring problem for some on Macs and Window computers.
Tried to find Sample files from Configurator 4, but they are now misssing from my default Configurator window. I want to test an already made panel and see if the issue happens with the sample files. Where are the sample files?
Thanks in Advance - Sam

Lag Time in Calling Methods?

I ran the two code examples below and got the same elapsed time for both: 10 ms. I was wondering whether calling a method causes lag: for instance, if you had to add four components to a frame's content pane, would calling getContentPane() four times be less efficient than setting up a reference to the content pane container and adding the four components to the container that that is returned?
The reason why I think that there would be a lag time, however infinitessimal, is because calling a method pushes an EIP onto the stack and returning from a method pops the EIP from the stack. It only makes sense that skipping this step would result in faster execution (once again, however infinitessimally faster that would be).
Here is the code for the two programs I used to test this out. The examples go back to my example above -- I am setting up a reference to the content pane in one example and continually returning it in the other. As I said, both returned the same elapsed time: 10 ms. I'm not sure whether my method of timing the programs was inaccurate or whether there really is no lag time in calling a method. What is the verdict?
1)
package cntrl.testing;
import java.util.Date;
import javax.swing.JFrame;
import javax.swing.JButton;
import java.awt.Container;
public class Test1 extends JFrame
     public Test1()
          long i = new Date().getTime();
          this.setSize(500, 500);
          this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container c = this.getContentPane();
          c.add(new JButton());
          c.add(new JButton());
          c.add(new JButton());
          c.add(new JButton());
          long f = new Date().getTime();
          long te = f - i;
          System.out.println("Time elapsed: " + te + " ms");
     public static void main(String[] args)
          new Test1();
}2)
package cntrl.testing;
import java.util.Date;
import javax.swing.JFrame;
import javax.swing.JButton;
public class Test2 extends JFrame
     public Test2()
          long i = new Date().getTime();
          this.setSize(500, 500);
          this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          this.getContentPane().add(new JButton());
          this.getContentPane().add(new JButton());
          this.getContentPane().add(new JButton());
          this.getContentPane().add(new JButton());
          long f = new Date().getTime();
          long te = f - i;
          System.out.println("Time elapsed: " + te + " ms");
     public static void main(String[] args)
          new Test2();
}

You're probably using some operating system where the smallest time interval you can measure is 10 milliseconds.
I would suggest that pushing something onto the stack would take an interval measured in nanoseconds. You have, let's say, a 1 gigahertz machine? That means it performs one billion operations per second, give or take. That's one per nanosecond.
There are a million nanoseconds in a millisecond. You're going to have to run a LOT of code to take a measurable amount of time.

Hey! On excel I want to count how many time a text come back in the spreadshit (sum) thx, hey! On excel I want to count how many time a text come back in the spreadshit (sum) thx

Excel:
line of cellule with 3 different text. I want to count have many time a text come in the line... Thx for helping me, it is for my job!!

Hopefully I am understanding your question.
A typical way to count how many times a word appears in a line of text in a cell is to substitute spaces for the word, one less space than the length of the word. Example:
A1 has the string "brown red brown green"
A2 =LEN(A1) - LEN(SUBSTITUTE(A1,"brown"," "))
"brown" has five letters so there are four spaces in the substitution text)
If you want to do several cells at once, counting the total number of times the word appears, concatenate the cells with a space between them
A1 and A2 have text in them
A3 =LEN(A1&" "&A2) - LEN(SUBSTITUTE(A1&" "&A2,"brown"," "))

Lag time in texting

Similar Messages

Maybe you are looking for