Lagging experience at all interface animations in OS X Mavericks
Hi,
I am having the same problem described in the topic https://discussions.apple.com/thread/5479303?tstart=0
So I have completed the steps suggested to reset the SMC and later made a ETRE check. I have pasted the check report in here. Please suggest ways to get rid of this problem.
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:3:25
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 668.3 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 81 GB (36.29 GB free)
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6)
com.tuxera.filesystems.tufsfs.fusefs_txantfs (2011.4.23)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.cleverfiles.cfbackd.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
[System] com.tunnelbear.mac.tbeard.plist 3rd-Party support link
[System] com.wdc.SmartwareDriveService.plist 3rd-Party support link
[System] com.wdc.WDSmartWareService.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.teamviewer.teamviewer.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
iTunesHelper
SmartDaemon
Dropbox
Caffeine
Alfred 2
Google Chrome
Box Sync
WDDriveUtilityHelper
WDQuickView
Internet Plug-ins:
o1dbrowserplugin: Version: 4.9.1.16010 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.4 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 4.9.1.16010 3rd-Party support link
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
AdobePDFViewer: Version: 10.1.4 3rd-Party support link
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
FolxNetscapePlugIn: Version: 2.0 - SDK 10.4 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Tuxera NTFS 3rd-Party support link
WDQuickView 3rd-Party support link
Bad Fonts:
None
Old Applications:
SmartDaemon: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/CleverFiles/SmartDaemon.app
CORE Keygen: Version: 1.0 - SDK 10.5
/Users/[redacted]/Downloads/MacHider with CORE keygen v. 1.6.5/CORE Keygen.app
Spin Doctor: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Toast 11 Titanium/Spin Doctor.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Disk Drill: Version: 1.7 - SDK 10.5 3rd-Party support link
Folx: Version: 2.0 - SDK 10.4 3rd-Party support link
oDesk Team: Version: 3.4.51 - SDK 10.5 3rd-Party support link
SmartwareServiceApp: Version: 1.16 - SDK 10.5 3rd-Party support link
/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Destinations:
Time Capsule [Local] (Last used)
Total size: 3
Total number of backups: 1
Oldest backup: 2014-02-02 18:07:41 +0000
Last backup: 2014-02-02 18:07:41 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% EtreCheck
1% mds_stores
1% Box Sync
1% Google Chrome
Top Processes by Memory:
172 MB Skype
164 MB Google Chrome
156 MB com.apple.IconServicesAgent
106 MB Messages
98 MB Dropbox
Virtual Memory Information:
3.29 GB Free RAM
3.38 GB Active RAM
501 MB Inactive RAM
867 MB Wired RAM
370 MB Page-ins
0 B Page-outs
The last step during the installation process is to erase the installer...unfortunately. As soon as OS X has finished downloading it wants to install itself. Veterans usually quit the installer and copy it to another hard drive, a flash drive or copy it to the downloads folder before installing so they'll have a copy for emergencies.
I don't know that CleanMyMac does any damage - I tested it for my user group (on a cloned drive) and found nothing horrible about it. Just didn't see anything particularly good about it either.
Given that your computer is using a relatively slow hard drive and has only 4GB what you are seeing is pretty typical. Mavericks is happiest with a very fast hard drive and/or more RAM. My 2011 MBA is very happy with Mavericks with only 4GB but it has an SSD. When I clone to an external drive and test that drive the MBA is an entirely different (and slower) creature.
You are using two huge (and bloated) programs: MS Office and Adobe. Either one will cause your computer to use virtual memory. Add Safari or Google Chrome to the mix and you have a recipe for a case of the s-l-o-w-s. A memory upgrade is in your future.
Similar Messages
-
How I can disable all the animation on OS X Mavericks
Please help me. I tried to install Onyx but it dosen't work!
Have you already turned off the top two choices under the Parameters > Finder tab?
Killing window animation is the top check box under the Parameters > General tab. -
Disabling interface animations and eye-candy
Is there any way to disable the interface animations and eye-candy in Aperture. I particularly want to disable the animations that play on stacks. Opening, closing, and sorting of stacks. They are sooooo slow with stacks of 30+ images. Especially when using keyboard commands to quickly perform multiple commands on a stack — it will start to play 2 or 3 animations on top of each other and it grinds the app to a halt.
Amen, brother!
It would be fine to have all the spinning, swooshing, eye candy if the basic program ran well. But it's so sluggish, and there are so many performance issues on such a wide variety of hardware (just peruse the topic titles here if you have any doubt) that it's completely exasperating to have to wait for all the eye candy to execute before the program can actually do what you're asking of it.
I've learned not to use stacks or smart albums (even touching these brings my Dualie 2.5 ghz G5 to its knees, spod city...) but there are a number of animations you trigger just in use. Would be interesting to see if turning them off speeds up the programs core functions... -
Interface Animations (effects) are "jerky" after Software Update
Has anyone noticed this? It seems that all of the interface animations (between screens, lock, unlock, fly in and out) are all "jerky" or jagged after the software upgrade. I've restarted, still no luck. The effects aren't smooth and free as they were before.
I noticed a rather jerky screen at one point, but it may simply be a process or re-caching because it wasn't present next time, and no other screen seemed affected.
-
Hi All,
We are using ManageEngine NetFlow Analyzer to monitor our network traffic.
We have a few VLAN interfaces on the switch where we have enabled flow-export ingress and egress. We can see traffic that is passing between the VLANs on which flow-export has been configured. However, we have on interface that is connected to remote locations. We have not enabled flow-export on this interface. The idea was that, we have enabled ingress and egress flow-export, and the remote locations connect to VLANs where flow-export is already enabled, we must get all traffic from there. But we cannot see traffic from the remote locations, but we can see traffic from inside network to remote locations.
After checking ManageEngine documentation, I see that we have to enable netflow on all interfaces to get accurate report. Can anyone let me know why this is required. We already have ingress and egress flow-export, and we must be getting all traffic. Please suggest.
Thanks in advance,
FaizHello Faiz,
As you probably know, NetFlow by default is only collected ingress. The ingress flows collected on all interfaces are used to display the outbound traffic on a selected interface. I don't know about ManageEngine but, in some NetFlow solutions, interfaces without NetFlow/IPFIX enabled will not be displayed regardless of whethor or not flows are going out of it.
Regarding ingress/egress being enabled on the same interface. If you are using flexible NetFlow to configure the export, make sure the "flow direction" is exported in the template. The commands to export both look like this:
ip flow monitor andrew-mon input
ip flow monitor andrew-mon output
Here is a good article on enabling ingress and egress NetFlow. Realize that just because you export both ingress and egress on a single interface and you export the direction, this doesn't mean the NetFlow solution will report on the data with a behavior that you would expect.
Ingress and egress flows are exported at the same time with only one difference "flow direction". For this reason, this element must be included in the template to ensure that utilization isn't overstated in the flow report. Again, this of course depends on your reporting solution.
Many vendors can't deal with a mixture of ingress and egress flows being enabled in a seemingly random fashion on the same device. In other words, they expect all ingress or all egress. Only a few vendors can handle a hybrid approach.
I hope this helps.
Jake -
Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....
Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled. -
Set secondary DHCP on ALL interfaces.
I wanted to post this as it's own question although it is posted already under "Ask the experts".
We've added a secondary DHCP server to our network so that if one fails or is taken down for maintenance, we don't have a gap in service. I need to add this new DHCP address to each interface for each controller in WCS. I have 4 WLC's with 9 interfaces per. That's 36 slow UI copy and pastes I'm not looking forward too. Is there a quick way to propogate this secondary DNS to all interfaces?
I've looked at Controller Templates and Controller Config Groups but can't seem to find my way through either to a solution to my situation. Can you offer any advice?
(Unrelated) Also, I can't post to this group from Firefox. IE works fine. Weird.I wanted to post this as it's own question although it is posted already under "Ask the experts".
We've added a secondary DHCP server to our network so that if one fails or is taken down for maintenance, we don't have a gap in service. I need to add this new DHCP address to each interface for each controller in WCS. I have 4 WLC's with 9 interfaces per. That's 36 slow UI copy and pastes I'm not looking forward too. Is there a quick way to propogate this secondary DNS to all interfaces?
I've looked at Controller Templates and Controller Config Groups but can't seem to find my way through either to a solution to my situation. Can you offer any advice?
(Unrelated) Also, I can't post to this group from Firefox. IE works fine. Weird. -
Oracle db listening on all interfaces
Hi,
I have oracle xe installed on a server linux.
Customer did some changes on the nw and now the database does not listen on all interfaces but just on 127.0.0.1:1521.
I need Oracle listening on this port but on all available ips in this server, in other words 0.0.0.0:1521.
I can I achieve this? I am not a db expert.
I need to do this because I have many installed product, especially OID, and I do not know what IP is actually used to connect to the database.
Thanks much.As1mov wrote:
This is ok, the problem is that OID does not create the LDAP listner even though it seams to connect correctly to the database. Missing something here from the problem description. A LDAP listener/server is not the same an Oracle listener. Uses different tcp ports and different application protocols. Also, you mentioned Oracle XE - last time I looked this was vanilla Oracle RDBMS. No OID included.
If you are talking about not being able to connect to an OID server - that requires oidmon and oidctl (console commands) to be used to start up the OID server (with its listener).
Should I take care of something if I add a new ip address to the linux box?Assuming that the Oracle Listener is not configured with +(IP=FIRST)+, then no - I would expect that bouncing the listener is all that is needed for the listener to start listening on port 1521 using the +0.0.0.0+. And this can be checked by using netstat or lsof commands (the latter can be used to list the tcp ports opened by the listener process).
If you have an error - please provide as much technical details as possible. Such as the listener.ora file, the alias entry used from tnsnames.ora, the output of a sqlplus session that attempted to use this alias to connect and failed, etc.
I'm not clear at all as to what the problem is that you're facing with the listener and multiple interfaces/IP addresses on the same server. -
Hi,
Would really appreciate some assistance in what I 'thought' is a simple task
This is what I want to do via TCL / EEM :
1.) Enumerate all interfaces on the switch or just query the running config
2.) Query each interface config
3.) If the interface config doesn't contain the sting 'authentication port-control auto' - send an email with the resulting interface name etc
I'm starting to lose my mind trying to do this
Thanks and regards,
BillTry this:
event manager applet intf-auth
event none
action 001 cli command "enable"
action 002 cli command "show ip int brie"
action 003 set output "$_cli_result"
action 004 set intfs ""
action 005 foreach line "$output" "\n"
action 006 string trim $line
action 007 set line $_string_result
action 008 string length $line
action 009 if $_string_result eq 0
action 010 continue
action 011 end
action 012 regexp "^Interface" "$line"
action 013 if $_regexp_result eq "1"
action 014 continue
action 015 end
action 016 regexp "#" "$line"
action 017 if $_regexp_result eq "1"
action 018 continue
action 019 end
action 020 regexp "^([^[:space:]]+)" "$line" match intf
action 021 cli command "show run interface $intf"
action 022 regexp "authentication port-control auto" "$_cli_result"
action 023 if $_regexp_result eq "0"
action 024 append intfs " $intf"
action 025 end
action 026 end
action 027 string length "$intfs"
action 028 if $_string_result gt "0"
action 029 mail from "[email protected]" to "[email protected]" server "10.1.1.1" subject "Interfaces missing auth port-control" body "The following interfaces are missing 'auth port-control auto': $intfs"
action 030 end -
I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!
You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
What a depressing experience I've had trying to upgrade to Maverick. I have the minimal requirements 10.6.8 Mountaim Lion,.. It is a continuous rerouting from Itunes store to Apple store.
I have not purchased anything from the Apple store in the past and it is not allowing me..upgrade to Maverick
I have even went so far to purchase a credir card hoping I could purchase an item and get an upgrade in return.
I'm in Taiwan and have tried to be faithful to the apple brand ..***?This Apple ID has not yet been used with the App Store. (also will not let me download even free apps.)
Apple ID creation is not currently available on the Mac App Store. says: (go to itunes on your computer or ios device) -
Fan runs all the time after OS X Mavericks installation, how do I turn fan off?
Fan runs all the time after OS X Mavericks installation, how do I turn fan off?
Rest the SMC, do it 2-3 times. Please click Intel iMac SMC and PRAM resets for instructions.
-
Hi all,Interface vs Abstract class
Hi, All When We are going to use interface or an Abstract class,Can tell exactly
Thanks in advanceInterface class is used to contain methods that is to be defined by children classes. And abstract class, even though you can have all methods being abstract, but normally I would use this class for situation such as implement methods that are general enough to be used by the children classes and left others being abstract to be implemented by children classes later. I always think this relationship in a simple way:
Abstract Class: Animal
Interface : Leg, Tail, Hair, Feather, Head...
Children classes: Tiger, Bird, etc.
Thus, for class Animal class you can have methods such as:
Abstract: canRoar, canSing, canFly, ...
Non-abstract: isSleeping, isAlive...
More example:
Tiger extends Animal implements Leg, Tail, Head, Hair
Bird extends Animal implements Leg, Feather, Head
I could be wrong, correct me if so. Cheers. -
List of all interfaces in the XI landscape
Hi Experts,
Currently my company is going through a merge project with a second company, and we want to integrate the SAP systems. This will inevitably mean more interfaces to be built. What we would like to have is a way to generate a list of all the current interfaces in the XI landscape, so we can get a good overview of what can be reused or copied.
I know we can get a list by opening the ID and looking at the configured scenario's, but we would like to automate this. Are there any tables where the interface scenario names are stored, and where we can see which type of interface it is (IDOC / File / JDBC / ...)?
If someone knows of a solution for this, it would be greatly appreciated. Otherwise this will remain a manual action, and as such, prone to mistakes or oversights...
Our current XI landscape is XI 3.0, SP18.
Thanks in advance,
YordyHi,
Solution is very simple: Use ABAP table SMPPREL3, this table contains all relationships (end-2-end) interface. You can use this table to know all about interface.
Only caution is that this table also have some wild-card entries so total number of interface count can vary by 1-2%, but this happen on runtime only, this table will perfectly match your manual counting.
Regards,
Gourav
<i>Reward points if it helps you</i> -
I started using IE but it was very slow. Then someone suggested Google Chrome but I had the same problem. I then decided to reinstall Firefox again.
This is a weird thing. My animations were working. These animations are connected to decoration items. They start working and then stop while the game continues to load.
There are some animations from Zynga that do work all the time but not the ones I speak of.
I ask others if they are having this problem but they say they aren't. I'm getting paranoid!The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200
Maybe you are looking for
-
How can I install OLEDB(8.1.7.2.0) driver on ORACLE 8.0.5?
-
Iphone 5 cdma/gsm from sprint
Good day! I live in colombia but here iphone 5 is not available yet. All bands here work with gsm sim card. I was wondering if i buy a sprint cdma/gsm versiona can i then make it work with my carrier here? Does sprint cdma/gsm work with sim card and
-
Inconsistent results moving mail to iCloud folders
Sometimes the mail will move and other times it will end up back in the Inbox. Having to close Mail and restart. One thing to note is that most of the mail is originating from a Gmail mailbox. This MB Pro was purchased with the Mountain Lion OS an
-
How do I enable the bookmarks button in Fennec?
Every screen shot of Fennec I find has a bookmarks button to the left of the address bar, but I've installed it on my Nexus One, and while I can add bookmarks, I can't view them. How do you enable the bookmark button on Fennec? == User Agent == Mozil
-
Channel 2 ???????
Hi, INPUT RMAN> run{ 2> allocate channel c1 device type disk; 3> allocate channel c2 device type disk; 4> backup current controlfile; 5> backup spfile; 6> } PROBLEM Here i allocated 2 channels for backup. when i run this script, * it allocate 2 chann