Lagging on classic application

I just upgraded to Mac OS X 10.4.8 yesterday. I was using Mac OS X 10.2 (or 10.1... I forgot) before. I was working with MATLAB through the classic mode and everything was fine. After I upgraded I start to get some lagging everytime I run MATLAB. Also some of the icons (including the Macintosh HD icon, and the folder icon) are blurred after the upgrade. Does anybody know what might happened? Any help would be appreciated.

Welcome to the Forum.
Many applications that need Classic can find things tougher with later versions of X, partly because Apple applies various rules more rigidly as time goes by.
If MATLAB's only problem is lagging - which sounds like you mean it runs slowly? you might try increasing its memory allocation quite a lot, by using File>Get Info on the application.
Underneath all that, though "blurred" icons suggests something more basic. in my experience anything before 10.2.8 appeared basically unstable and if I'd started from that far back and updated, as opposed to wiping the disk and starting afresh with the higher version, then I'd eriously consider backing up everything that matters to you (preferably twice) and starting again.

Similar Messages

  • Error while creating Classic Application

    Hi All,
    While creating classic application through Application wizard i am facing a error "An error occured while processing this page. Please check the logs." I am getting this error when i click 'Finish' on last page. Both the Oracle and Essbase Connections are fine and validated. Any idea for this error? Where i can check the logs as suggested in error message?
    I am using the version 11.1.2
    Thanks a lot
    Edited by: Ashu on Jun 15, 2011 10:42 PM

    If on windows have a look in <MIDDLEWARE_HOME>/user_projects/epmsystem1/diagnostics/logs/services
    There will be two planning log files.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Access is denied  while creation hfm classic application in workspace

    access is denied while creation hfm classic application in workspace. i have given full roles and access to my admin user. still i am facing same issue.
    i am trying to create classic application workspace under
    Access is denied.
    Access is denied.
    Show Details:
    Error Reference Number: {401A779B-3846-4645-852B-D036AF74C7DA}
    Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 1087;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 768;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 3430;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHFMwManageApplications.cpp;Line: 2152;Ver: 9.3.1.0.1502;

    Hello,
    Do you have the HFM ADM drivers installed on the workspace server -- I believe if you do not have those installed then you are going to have some issues.
    Regards,
    -John

  • Help! Why do my Classic applications refuse to run?

    I don't know if this is the best forum for this problem but hopefully someone here will either be able to help me or tell me where I can look for help. I have been using Classic mode with my G5 to run Microsoft FrontPage, which I use for my website. For the last 8 months everything worked fine, but recently I have encountered some problems that I don't know how to deal with. When I try to launch Frontpage Explorer I get the message "server timed out". If I try to go straight to Editor I can open individual pages, but when I try to save the page I get the message "out of memory". At that point I not only have to save the page without changes, but the page is then erased!
    I have tried the following. First I removed the OS9 system folder from the G5. Then I removed the FrontPage application. I shut down the computer and after restarting I reinstalled the OS9 folder and the FrontPage app. However, the results are identical. Fortunately I have the web pages backed up in several locations so I have not yet lost any data, but I am no longer able to update my website, which is a critical part of my business.
    Does anyone have any ideas for anyting else I can try? Could this be some sort of virus? Everything else seems to work fine, only my Classic application has been affected.
    G5 2.0   Mac OS X (10.4.8)  

    Another "symptom" to report. I decided to use my old G3 that also has Frontpage installed to update my site. But I got the exact same error messages! I even booted the G3 in OS9, but still was unable to launch Frontpage; or to be more accurate I was unable to get Frontpage to open up my web pages.
    I thought that perhaps the number of webpages I had stored was too much for Frontpage to handle, so I moved ~90% of the pages to a separate folder and then put the folder in a different hard drive. No luck, same results.
    I did try rebuilding the desktop on both the G3 and G5, but it made no difference. Any suggestions will be very gratefully accepted!
    G5 2.0 Mac OS X (10.4.8)

  • Unable to see Planning Classic Application Administration 11.1.1.3

    Hi Gurus,
    I successfully installed full suit of Hyperion 11.1.1.3
    When I go to workspace I can see Classic Application Administration for Consolidation, but I cannot see Classic Application Administration for Planning.
    I re-configured planning as well but same result.
    I am able to open EPMA dimension library, essbase and all rest of the products.
    Does anybody have an idea why is it happening.
    Thanks..........

    Hi,
    I got the solution. We need to re-configure web server under workspace and restart workspace & planning service.

  • Hyperion HFM Classic Applications not showing up in Calcuation Manager

    Hello,
    11.1.2.2
    HFM Classic applications are not showing up in Calculation
    Manager.
    The following error is generated…
    "There was an error retrieving the list of classic applications. Please see the Calculation Manager log for more information"
    I see in the log
    Excerpt from log…
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP:
    CALC#11.1.2.0] [SRC_METHOD: logInfoMsg] The custom error module does not recognize this error.
    [2013-08-08T17:01:11.981-04:00] [CalcMgr0] [WARNING]
    [EPMCAL-00002] [oracle.bi.bifndnepm.calcmgr.common.GenericLogger] [tid: 21]
    [userId: <anonymous>] [ecid: 0000K1VidTD5UcG6yzbe6G1I0iTy0000Ok,0] [SRC_CLASS:
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP: CALC#11.1.2.0] [SRC_METHOD:
    log] Exiting com.hyperion.calcmgr.provider.hfm.HFMProvider.getApplications
    73311
    [2013-08-08T17:01:12.288-04:00] [CalcMgr0] [NOTIFICATION] []
    [oracle.bi.bifndnepm.calcmgr.common.GenericLogger] [tid: 21] [userId:
    <anonymous>] [ecid: 0000K1VidTD5UcG6yzbe6G1I0iTy0000Ok,0] [SRC_CLASS:
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP: CALC#11.1.2.0] [SRC_METHOD:
    logInfoMsg] Global role
    for user: srecine is ADMINISTRATOR
    Note: the user is fully provisioned for all HFM applications, however, they do not show up in Calc Mgr.
    There was a known issue in 11.1.2.1 where a patch fixed this issue, however, this is 11.1.2.2 and I see no applicable patch.
    any ideas where to go from here?
    Joe Orgill

    Yes the issue in 11.1.2.1 should be fixed in 11.1.2.2
    The 11.1.2.2 Readme has it in the list of defects fixed:
    12421352 - You cannot select Financial Management Classic applications from Oracle Hyperion Calculation Manager.
    It may be worth logging with Oracle is you believe the configuration is correct.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Pros and cons of EPM and Classic Application.

    Hi All Experts,
    can any one tell me what are the pros and cons if create EPM Application
    and pros and cons if we create Classic Planning Application
    this is really urgent we have to submit this to our client as soon as possible

    Hi,
    The main difference between using of classic and EPMA is I think hidden in the first letter of EPMA. EPMA is for Enterprises where multiple performance management applications are considered applicable. When you have an HFM application, a planning application, a performance scorecard application, a couple of essbase cubes around and lots of reports pulling data from all these, sharing data and metadata becomes crucially important. And no mistake, classic planning is as good as EPMA planning and easier to handle, however, if your company or client is thinking of having a total EPM solution in place, then EPMA is the right choice. However, since you can always convert your classic app to EPMA but you've got only one bullet to fire, it might be wise to stick with classic application until your client/company starts imagining that sort of ambitious goal.
    Cheers,
    Alp

  • Migrating HFM 9.3.1 Classic Application to HFM 11 Classic Application?

    Can any one please let me know what are the steps involved to migrate a HFM Classic Application from 9.3.1 to 11 Classic Application.
    Thanks in Advance

    All the steps provided by Nick, plus run the HFM Schema Upgrade Utility which should be under <HYPERION_HOME>:\Products\FinancialManagement\Server

  • Change memory for classic application from 10.3.9

    PowerBook G4 Sys 10.3.9
    Changing memory alloted to aplication...
    Normally I'd quite the app, highlight it's icon, hit "command-i"
    and change memory in the dialog box that pops up.
    However this classic app give me the correct dialog box without my
    being able to highlight minimum and preferred memory amounts.
    The only change I've made since installing classic application
    on this mac i bought used is to make myself "admin"
    and deleted old admin after creating my own password.
    Should I reinstall classic application? (Virtus Walkthru Pro2.0)
    An oldie but a goodie very important to us.
    Or is there some simple fix I'm overlooking?
    Thanks
    Powerbook G4   Mac OS X (10.3.9)   512 MB SDRAM

    Hi, Gregor, and welcome to Apple Discussions. Wow! I haven't heard anyone mention WalkThru Pro in at least five or six years. I used it to "pre-build" a total reconstruction of my house back in 1995, so my wife could see what it was going to look and feel like, inside and out. Darned if the house doesn't look and feel just like the model did (or better), so I'm still happily married. But WTP has been retired since then. It paid for itself dozens of times over, in a single use!
    Are you certain that the icon on which you Got Info was the application itself, and not an alias? If that isn't the issue, then yes, it would be worth reinstalling WTP to make sure you have appropriate permissions to tinker with it.

  • Currency creation in Classic Application

    Hi John,
    When creating a classic application there are only some default currencies given. Can we add a currency to that list.

    Hi John,
    As u said it has got nthng to do witd what currency we select in a single currency application. But at the time of creation when we select the base currency, the user wants it tobe SAR. though it doesnt effect even if we select USD, the user wants it to be SAR. I there any way where we can add the currency in the backend tables so that it gets displayed in the drop down when we create the classic applcn

  • Classic Application Administration vs. Administration within the workspace

    Can someone tell me the Pros and Cons of Classic Application Administration vs Administering the App from the Workspace?
    We have always used Classic and I would like to know if it would be worth the effort to convert over.

    Workspace admin features, or EPM Architect, is certainly the future direction. The windows based metadata manager is on the sunset trail in terms of new features being added. That said there are still some things that need to be ironed out in certain areas. I would recommend building this into your dev plans and carefully evaluating before migrating to your production efforts. One impetus for moving straight to the EPMA platform was to take advantage of the new graphical calculation manager interface for building rules in HFM rather than using the VB script editor. This need will be gone with the release later this summer where you will be able to use the Calc Manager with both CLassis and EPMA applications. So I would definately prepare yourself, but tread lightly for now.

  • I cant find classic application administration in workspace administrate ?

    i cant find classic application administration in workspace administrate what
    i am suppose to do now ? how can i enable it ?

    Not sure of your version, Have you configured the web server as the last component in the configurator, if not try configuring again.
    Can you go direct to the planning app wizard e.g. http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
    Might be also worth trying to create your first app through that route if reconfiguring the web server does not help.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Running "Classic Application" in Mac OS X v10.6.2 Snow Leopard

    Hello, I'm trying to run a Classic Application on Mac OS X v10.6.2 Snow Leopard... goes by the name of "Titanic Adventure Out of Time." When I go to install it I get the message "You can't open the application Titanic because the Classic environment is no longer supported." I'm wondering how I will be able to get this to work on my MacBook. I've read a few sites which talk of some sort of emulator, or mounting it with Roxio Toast? Is this correct?

    Believe it or not you may have an easier time running that program in Windows on your Mac! That game was made for Windows, and there is better old Windows support for Intel Macs than there is Mac OS 9 support. See my FAQ*:
    http://www.macmaps.com/macosxnative.html#WINTEL
    And see http://www.macmaps.com/macgamepages.html
    to see if there are any patches to make it Mac OS X Intel compatible.
    - * Links to my pages may give me compensation.

  • Classic Application SKPlugins in Core Services folder.

    I noticed that I have a folder, SKPlugins (Classic Application plugins) in my Core Services folder. They have the slash through them, meaning they are invalid for my OS. I'm guessing they may have come from a data transfer from my iMac G3 when I got my iMac 5,2.
    I'd like to trash these, but thought twice and searched for a clue about them. I haven't had any luck researching this. Can I trash these without causing a problem? Did they come from the transfer?
    iMac5,2 (17 inch monitor)   Mac OS X (10.4.8)   Previous computer: iMac G3 w/o Firewire (8/2000 - 10/2006).

    Welcome to the Apple Support Communities
    Try deleting the Dock settings file. First, open Finder, select Go menu > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.dock.plist" and restart the Mac

  • Migrating Planning Classic Applications to EPMA

    Why I need to Migrating Planning Classic Applications to Performance Management Architect; I mean what is the benefits I gained.
    Thanks In Advance,
    Bishoy Sami

    Hi
    Have u read this thread
    EPMA Vs Classic application
    regards
    sasha
    Edited by: Softperson on 26/5/2010 14:14

Maybe you are looking for

  • How do I get my MacBook Pro back on after a crash? Error code -2100F, How do I get my MacBook Pro back on after a crash? Error code -2100F

    I have a MacBook Pro bought late 2011. Runs on Mavericks. Recently it became very slow and one day last week while using it, the rainbow cursor spun for over 15 minutes after which it was restarted by pressing the power button. After that, it went di

  • External volume is suddenly read only

    Mountain Lion on 2009 Macbook Pro. I have a Drobo S with three volumes. One of the volumes has become read-only. I cannot change this in the Finder. This happened with a different volume a couple of days ago. This never happened before I upgraded to

  • How Can I Add Pivot Tables of Excel Into JSP Pages

    Hello all, Basing upon a query to database, i wanted to add a Microsoft Excel pivot table functionality in JSP page [with the result of query]. Is it possible to create a Pivot Table in JSP with dynamic data from database ?? Can any body help me in s

  • OC4J Instances in Cold Failover Cluster

    I'm running OAS 10.1.2.2.0 on a windows 2003 server under a cold failover clustered environment and was wondering... Is it recommended to have one web application deployed in it's own separate instance? For example, webapp1 deployed to instance1 and

  • Initiating a process with complex input

    In trying to initiate a process whose input message has a single part defined by an element like this <ns:copyRequest xmlns:ns="..."> <ns:input>Some text here</ns:input> </ns:copyRequest> the HTML input form cannot be created (an error occurs). The d