Lagging texts inbox
Apologies if this has been brought up before. A couple of weeks ago I noticed that there's a lag when I try to open my texts inbox. An action that used to take a few seconds now takes a couple of minutes. It kind of defeats the purpose of using texts for quick communication. It even lags when I try to respond to a text that already took forever to open. I've had ATK installed on my phone when the first week I got it so I dont think it's the other apps. I even cleared my inbox and cache, but I am still having the lagging issue. has anyone else had this issue and resolved it?
The ATK app is not needed. The phone was designed to close the apps on your device. Try removing the ATK app and perform a hard reset on your device. The steps are listed below to perform the hard reset.
From the home screen, touch the applications tab (located at the bottom of the display)
Touch Settings
Touch Privacy
Touch Factory Data Reset
Touch Reset Phone.
If presented, enter the current passcode or draw the unlock pattern
Touch Erase Everything
http://search.vzw.com/?do=viewdoc&id=33552
Similar Messages
-
IPhone - Typing lag, text scrolling, lag
Hi all,
After upgrading to 2.0 I've experienced lag while typing in many areas (text, Safari, Contacts, etc.) - it takes a second or two for the screen to display what I've entered. At this point, I'm able to type a few words before it decides to diplay. In addition, scrolling through the phone is a chore as it freezes when selecting Contacts, Recents and so on.
To make things more interesting, there are times when I am unable to scroll to the bottom of existing text messages - when selecting the text, it will not be at the bottom. Rather, it will be 4-5 texts up - it is possible to scroll to the bottom; however, it will not stay there. To text, I must enter the text area then press the Home button a couple of times - this seems to happen when there are unread texts available.
Turning iPhone off and on has not helped, seems like a restore is the next option though any suggestions are always welcome.
Regards,
JasonI have this same problem and it drives me absolutely INSANE!!! It wasn't apparent before 2.0 and multiple restores have done nothing to correct it. Apple needs to get on the ball.... So far the iPhone has, in general, been a huge disappointment and I purchased Day One. Of all the Apple products I have owned in the last 9 years, I must say that Logic (all versions) and the iPhone are the only ones I would consider crap. I use Ableton Live because it's way better software for producing electronic music than Logic but there is no better option concerning the iPhone. If Apple would offer Logic as a plugin package or simply allow it to be ReWired as a slave application I would go back to using it. ****, I'm Apple Certified in Logic and I won't use it anymore!!! I seem to have gotten off topic.... Apple please fix the iPhone (and Logic while you're at it).
P.S. I will not be surprised if my post gets deleted as Apple is rather touchy about technically-minded people giving poor reviews of their products. They should focus instead on making sure their products perform at the top than hushing the opinions of their pro users. Just my .02!!! -
i have had the droid charge since july of last year, i have had to replace my phone and the sim card once already. a couple things i am curious if anybody has experienced or knows how to fix because it is SO frustrating!
-When i type a text message I cant get through a whole sentence before it actually shows on my screen, to top it off people do not get my messages in a reasonable time span, or i do not receive their messages.
- When i am in 4G my internet loses connection (and its not because i am close to my data limit or anything of that nature.)
HELP!?Hello to you Ashleyelise2!
I really appreciate you taking the time to complete the troubleshooting you've already done. I'm just truly sorry you're still experiencing the same issues. It seems you may be experiencing a couple of different issues that aren't related.
The delay in your text showing on your screen may be related to the processor, the application, your memory, etc. That would be device related. I would recommend a little "spring cleaning" on your phone. Clean up old messages, delete unused applications, move apps to your sd card, etc. If you're using a 3rd Party messaging app, I would recommend uninstalling and reinstalling it.
The network issues, delayed receipt of your text, or never receiving their text plus the loss of your 4G is something we would want to escalate to our engineers. If you would like to do this, please accept my follow request and private message me your contact information.
I really look forward to resolving your concerns!
Thanks!
MelissaM_VZW
Follow us at Twitter @vzwsupport -
Hi, I was a bit surprised when I suddenly got a message telling me my text inbox was close to full.
Is there any way I can delete individual messages, not entire threads?
If not, is there any way I can back up a message thread onto my computer (other than manually retype everything?)
Many thanks,
AleksThere's a 1000 message limit I'm afraid, and no way (at this time) to delete individual messages.
As for downloading to computer, there's a discussion on exactly this subject here: http://discussions.apple.com/thread.jspa?threadID=1341349&tstart=0c -
Photoshop CS4 sudden lag after installing tablet driver
Hi..
So my PS CS4 had never lagged before, it was all running perfectly, all functions are going quickly. I was using the newest driver for wacom intuos 3,
but with using a new driver, I had a weird pressure problem. It would only work with an older driver, so I uninstalled the newest driver and changed it into the older driver. But it won't work unless I trash photoshop prefernces (the ctrl alt shift thing) ...
Suddenly everything just turns laggy, although no pressure problem.. brush lag, text tool lag, everything, even moving the canvas window lags. I don't know how to return the old preferences, i tried increasing virtual memory from 4k to 6k mb, but no change. In performance tab I changed memory usage from 70% to 80% no change too.
I would like to try and change back to the newer wacom tablet, but i never found a solution to the newer driver pressure problem, everyone in some other forum suggested to trash photoshop preferences and change to older driver.. Ages ago, I did this in my computer, and it's running good, but recently I want to do it in my laptop, and it lags.
I'm using windows 7, 64bit.
RAM 8gb,
E and C drive are more than 100GB available.
photoshop version 11.0
openGL turned off (or on, no difference)
I tried uninstalling photoshop but no luck. I tried updating GeForce driver to the latest version, no luck too. (I'm using gtx 420m)
I'm just curious if there's a way to fix the problem without having to download photoshop patch (because it was running perfectly so I don't think it has anything to do with photoshop patch?)
any idea? please tell me if i forgot to mention something..
thank youHi, really appreciated your reply, thank you very much. I didn't know anything about this, but if I didn't rollback, I will still have weird pressure problem.. I uninstalled the newer driver properly too, unplugged the tablet, shutting it down, exactly like the people's suggestion in that certain forum. Nobody else seems to be able to find the solution for the weird pressure with newer drivers. I can't find anymore solution beside rollbacking drivers, tried asking here and there.. I also dared to do this in my laptop because this method works in my PC.. Wacom only suggested that we update the driver to the newest, which never helped at all.
I tried photoshop without any tablet drivers, still lags : (
I will try updating photoshop and let you know.
Thanks! -
OWA; Query number of messages in inbox
Hello all,
Is there a way, from Java, to ask the Exchange server how many messages are in a users' inbox and how many of them are new?
We want to write a simple text display iView that shows only the text 'Inbox #(<b></b>)', where '#' is number of messages in a users' inbox and '<b></b>' is the number of new messages there.
Any help is, of course, greatly appreciated.
Patrick.Hello Patrick,
try following
import javax.mail.Session;
import javax.mail.Store;
final Session session = Session.getDefaultInstance(fMailServerConfig);//can be empty
final Store store = session.getStore("imap");
store.connect("EXCHANGE_SERVER", "YOUR_NT_DOMAIN\NT_ACCOUNT\EXCHANGE_ACCOUNT", "PASSWORD");
System.out.println(store.getFolder("Inbox").getMessageCount());
Best regards, Maksim Rashchynski. -
4S Touchscreen, Orientation and Speak Text problems?
Hello my Fellow Nerds and/or iPhone lovers,
I have been having a number of problems using my touch screen on the iPhone 4S and I'm not sure if it's directly a hardware problem or simply I don't know how to use it. It seems as though when I make an attempt to select a single word and make the desired edit that more or less text happens to get selected. Same problem with paragraphs or other amounts of text as well that I am not able to select what I wish.
The main areas I've been using that feature is in Notes app, email messages and places just like here where I'm editing the text as I make my post. In The Notes App I don't know why but sometimes I'm getting a keyboard when I don't want it and sometimes I can't seem to correctly edit the text.
Just checking to see if anyone out there has had similar problems as well. I think this has something to do with the iOS 7 upgrade or simply that I don't know how to use my iPhone. I have just recently started using it much more for editing text. Maybe it's simply that I need a refresher on the screen use and editing text so if you happen to know a good Apple webpage or another link just let me know about that if you could.
My other issue that's ongoing that the screen orientation is flipping when I don't have the phone in that position. Again I think this is something to do with iOS 7 but perhaps not since is a new issue and I have never had problems with that in the past.
Part of the editing/screen orientation is related also to do with speaking text. Once text is selected, I don't always get the speak text button or when I try to touch the button it barfs out on me going through the small menu that you navigate.Hello hrenshaw0128,
Texting is one of the most common forms of communications in today’s society. I can certainly see the value in having text messages working at all times! Hopefully, you will reconsider canceling your parents' service as we can partner together and resolve your messaging issues. I have a few questions to ask you in order to get clarification on the issue. What software version do you have on your Droid Incredible? Are you getting any error message(s) when trying to send or receive a text? What city and state are you located in? Below are a few troubleshooting steps for you to try on the device.
Check to ensure that you have the current software on your device.
Remove any unused apps from the device to free up device memory.
Delete your signature on your device if you have one.
Remove any 3rd party messaging apps.
Erase long threaded text messages from the text inbox.
Perform a factory reset on the device. (See link below)
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=30946
If you decide to perform a factory reset then it is encouraged to back up your contacts and calendar entries. Backup Assistant is an excellent app to store your contacts and calendar entries can be saved on your Gmail account. Also, be sure to save all of your music, pictures, and videos on a memory card prior to the reset. Once the device has been reset to it's factory state, there is a brief tutorial on how to reactivate and setup the device. After the completion of this tutorial, please test all voice, data, and text services. If you have any additional questions or concerns then feel free to reply to this message.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport -
When viewing a text conversation, how can I see the person's first AND last names?
When I view my text "inbox", they are listed according to how I have each contact entered...for example John Smith. When I look within the text conversation with that person, at the top it only says "John". This is very frustrating. (I only recently upgraded to iOS 7 and have a feeling this is one of many things I'm going to resent.) Can't I express a preference for the full name to appear?
Settings App > Mail,Contacts,Calendars > [scroll down to CONTACTS] > Short Name [turn off, or select another display option)]
-
Larger icons and text, in Elem. 10
How do I get larger icons in the Options bar, and lager text in the Menu bar, In Element 10.
I use Windows 10.No, you're not missing anything. There is no way to change the icon/font size in the sidebar other than changing the resolution of your monitor. It's a good idea to be able to though so you might want to provide Apple feedback at http://www.apple.com/feedback/macosx.html.
-
Would like to eliminate text from my plan and get a data package
If someone sends a text message to my email, will I be charged for a text message?
No, if someone uses their texting app to send a message to your e-mail address, you will not be charged for a text message. The message will be delivered to your e-mail inbox, and you will have to use your e-mail app to check it on your phone.
It IS possible to e-mail a text message by sending to [email protected] Those messages are delivered to your text inbox, and charged as text messages. -
Want to extract my text messages on N97 to normal ...
Hey guys,
do any of you knows about it ?
I want to convert my text ( inbox, sent, draft) to some normal regular file format which I could be able to read them very easily.
I want it to be on normal windows notepad format (txt) or Microsoft word format
[email protected]
thank you so muchThe only way to do so is by restoring from a backup that contains the deleted messages. Note, this will remove any data on your phone not contained in the backup you restore from. No backup, no way to recover anything.
-
1. upgraded to ios5
2. activated iMessaging
3. get message saying carrier may charge for activation texts - never received these - no matter how many times i try to activate
4. keeps saying activation unsuccesful
5. allows me tho, to sign in with apple id
6. recipients receive iMessages in their text inbox but from my email address
7. if i sign out of apple id cannot use iMessages
8. iMessages has defaulted to email address, not telephone number as it should
9. if i try to add another email adress it will alow me but there is nowhere anywhere at all for caller id
10. i cant delete that email adress as it is the primary one that im signed in with as my apple id
11. i have done a hard restore, ive turned all my notifications, imessaging, face time off then turned phone off and on again....
12. considering a restore thru itunes
13. also considering a DFU
14. and finally considering flushing the bloody thing!!
can anyone help?iMessage is a strange one for me too...
When I first activated it, it would not show up texts I sent or rcvd on both my iPhone and iPad.. just iPhone... I played with this for a long time before changing the "Caller ID" setting from within iMessage settings... NOT the one in the phone settings...
After I chose to use the email (Apple ID) assigned to iMessage the syncing worked! this doesn't change the fact that my regular phone number shows up to non iOS5 devices I text... very strange for me too...
it does work however I had to change that setting in order to get it to work...
As for cant activate... I had that issue at first but after first day it worked fine...perhaps network lag or iMessage lag due to too many users in at once... -
My list of things I'd like changed/fixed:
No carriage return/new line facility in Mail / Text editing (unless there's a key combo for it ?). This is a real pain for me currently.
In SMS / Text editing the Reply To and Delete Text options should be above Call Sender (please!)
I changed the default right hand shortcut key (used to be Camera) to something else and now can't find where that option is again. Please put it with the other One-touch key options in Settings.
No shortcut available to go straight to my SMS / Text Inbox from a shortcut/one-touch key.
MSN (Live) chat (downloaded on phone) defaults to capitalising the first letter of every sentence. This is really annoying for normal chat and one-liners (lol, rtfm etc)
Needs better (more tactile) power and volume buttons.
The default earphones are horrendously uncomfortable, how about a decent set of in-ear options (Sennheiser etc) ?
Everything else is really cool, I particularly like the delete/backspace button and it's default action and confirmation on the d-pad to delete texts/messages !
Hopefully some of these can be fixed in future firmware updates or at least made optional if others disagree.
Thanks.Message Edited by hollom on 12-Dec-200703:23 PMI have had my E51 a few days and the biggest annoyance is the selection of WLAN access points.
For SIP, I can define a set of access points (e.g. Home and Work) that are automatically selected when in coverage.
For other applications (e.g. Nokia Maps), If the application has been set to use access point "Work", and I try to use it at home, then it complains that there is no internet connection, or asks me to disconnect the access point, even though I have a good connection to my WLAN.
What I want is the ability to define a set of trusted (and free) access points, that the phone will automatically roam between without user intervention. This should be done below the application layer, so that all (including existing) applications can use the feature.
BTW, why doesn't Visual Radio allow me to select a WLAN access point?
E51 owner
GSM/3G Protocol stack designer -
Is there a way to txt a new touch from a 2nd gen touch?
Hi, I am new to this.
My 10 year old son, who lives 300 miles away, has a new ipod touch.
I have an older 2nd generation touch
I do not have any other ios device. I have windows Xp on my PC and I do have Itunes.
Im wanting to set up an @me.com email address so that I can TEXT my sons new ipod touch...My ipod is set up with my gmail account, but when I send him an email to his @me.com email, it goes to his email inbox and not his text inbox... My son is young and he sees all his texts but not his emails, and Im to far away to show him..
My father has an iphone and he can text my sons @ me.com, email straight from his texting screen on the iphone
Is there a way to text my sons new ipod touch from my old ipod touch without installing a 3d party app?I am not aware of any since the 2G does not support the Messages app. That app requires iOS 5 or above and the 2G can only go to 4.2.1. Further, I am not ware of any testing apps that are presently compatible with the 2G iPod.
-
Simultaneous httpservice in the same component
Dear Flexer,
I created an Air application.
On loading my component, I'd to make simultaneous request to my database to load some data to my component.
My component is a form with several comobobox and and text field.
But to do that I have two major problem.
- Sometimes, my form (my component) is loaded but there no information in my text field, perhaps request is not finished? but how to verify that and how to solve.
- Other question, as requests with http service is for different table, one to load sudent, other to load note, other to load teaching , is it possible to do this request in the same php file and to get all thos informations with the same E4X file.
Thanks for help
[Code]
<?xml version="1.0" encoding="utf-8"?>
<windowSkin:NativeTitleWindow xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:windowSkin="fr.intersystemes.ui.windowSkin.*"
xmlns:skins="fr.intersystemes.ui.skins.*"
xmlns:tabBarClasses="flexlib.controls.tabBarClasses.*"
minWidth="800" minHeight="800" borderVisible="false"
creationComplete="onLoad(event)"
currentState="tb1"
dropShadowVisible="false"
skinClass="fr.intersystemes.ui.windowSkin.NativeTitleWinSkin">
<windowSkin:states>
<s:State name="tb1"/>
<s:State name="tb2"/>
<s:State name="tb3"/>
<s:State name="tb4"/>
<s:State name="tb5"/>
<s:State name="tb6"/>
</windowSkin:states>
<fx:Declarations>
<!-- Placer ici les éléments non visuels (services et objets de valeur, par exemple). -->
<s:HTTPService id="phpPatientDetail"
showBusyCursor="true"
useProxy="false"
resultFormat="e4x"
method="POST"
result="detailPatient(event)"
fault="trace(this + event.fault.toString());">
</s:HTTPService>
<s:HTTPService id="phpLoadTypeDossier"
showBusyCursor="true"
useProxy="false"
resultFormat="e4x"
method="POST"
result="allDossier(event)"
fault="trace(this + event.fault.toString());">
</s:HTTPService>
<s:RadioButtonGroup id="rbsex"/>
</fx:Declarations>
<fx:Metadata>
[Event(name="myEventClose", type="fr.intersystemes.ui.windowSkin")]
</fx:Metadata>
<fx:Script>
<![CDATA[
import fr.intersystemes.VO.PatientVO;
import fr.intersystemes.config.urlManager;
import fr.intersystemes.util.DateUtility;
import fr.intersystemes.util.FileSerializer;
import fr.intersystemes.util.UserPrefs;
import mx.collections.ArrayCollection;
import mx.events.FlexEvent;
import mx.events.IndexChangedEvent;
import mx.events.ItemClickEvent;
import mx.rpc.events.ResultEvent;
import spark.events.IndexChangeEvent;
[Bindable]
public var monIdPatient:String;
private var pg:UserPrefs;
[Bindable]
public var PAT_TB_ARRAY:ArrayCollection = new ArrayCollection (
[{label:"Personnelles"},
{label:"Assuré & Sécu. Soc"},
{label:"Compléments perso"},
{label:"Autres adresses"},
{label:"Cursus"},
{label:"Archives"}]
[Bindable]
private var DP_PAT_CIVIL:ArrayCollection = new ArrayCollection (
[{label:"Monsieur"},
{label:"Madame"},
{label:"Mademoiselle"},
{label:"Le Jeune"}]
[Bindable]
private var DP_PAT_ADRDEF:ArrayCollection = new ArrayCollection (
[{label:"Monsieur"},
{label:"Madame"},
{label:"Mademoiselle"},
{label:"Le Jeune"}
[Bindable]
private var DP_PAT_DOS1:ArrayCollection = new ArrayCollection (
[{label:"N° Etudiant"},
{label:"N° INEE"},
{label:"Liberer"}
[Bindable]
private var DP_PAT_DOS2:ArrayCollection = new ArrayCollection (
[{label:"N° Etudiant"},
{label:"N° INEE"},
{label:"Liberer"}
[Bindable]
private var DP_PAT_TEL:ArrayCollection = new ArrayCollection (
[{label:"Maison"},
{label:"Bureau"},
{label:"Pére"},
{label:"Mére"}]
protected function onLoad(event:FlexEvent):void
this.pg = FileSerializer.readObjectFromFile("prefSaisiePat.up") as UserPrefs;
var urlPatient:urlManager = new urlManager();
phpPatientDetail.url=urlPatient.urlService() + "loadStudentById.php";
var paramsPatient:Object = new Object();
paramsPatient.idPatient = monIdPatient;
phpPatientDetail.send(paramsPatient);
phpLoadTypeDossier.send();
private function onMyEventClose(e:Event):void
private function allDossier(event:ResultEvent)
private var objectPatient:PatientVO;
private function detailPatient(event:ResultEvent):void
trace(this + event.result.toString());
var resultXml:XML = event.result as XML;
var aNode:XML;
var list:Array = new Array();
// we use resultXml.children() (and not resultXml..customer)
var dateConv : DateUtility = new DateUtility();
trace ("result" + resultXml.children().length());
for each (aNode in resultXml.children())
objectPatient = new PatientVO();
objectPatient.paIndex = Number(aNode.@id);
objectPatient.paNomP = aNode.@np ;
objectPatient.paPrenom = aNode.@pr ;
objectPatient.paCodePostal = aNode.@cp;
objectPatient.paDossier1 = aNode.@d1;
objectPatient.paDossier2 = aNode.@d2;
objectPatient.paNaissance = dateConv.dateStringToObject(aNode.@dn);
objectPatient.paNumTel1 = aNode.@tel;
lNom.text = objectPatient.paNomP;
lPrenom.text = objectPatient.paPrenom;
//lAge.text = dateConv.calculAgeAn(objectPatient.paNaissance) as String;
lAge.text = " - " + dateConv.calculAgeAn(objectPatient.paNaissance) + " ans et " + dateConv.calculAgeMois(objectPatient.paNaissance) + " mois";
lNaissance.text = "Né(e) le " + dateConv.dateToStringFR(objectPatient.paNaissance);
this.title = objectPatient.paNomP + " "+ objectPatient.paPrenom;
fdNom.text = objectPatient.paNomP;
dfNaissance.text = dateConv.dateToStringFR(objectPatient.paNaissance);
private function reloadPatient():void{
private function tbClickEvt(evt:IndexChangeEvent):void {
// Access target TabBar control.
//var targetComp:TabBar = TabBar(evt.currentTarget);
switch(evt.target)
case 0:
currentState="tb1";
break;
case 1:
currentState="tb2";
break;
case 2:
currentState="tb3";
break;
case 3:
currentState="tb4";
break;
case 4:
currentState="tb5";
break;
case 5:
currentState="tb6";
break;
default:
currentState="tb1";
break;
]]>
</fx:Script>
<s:Group width="100%" height="100%">
<s:layout>
<s:BasicLayout/>
</s:layout>
<s:Image x="0" y="0" width="53" height="53" click="reloadPatient()"/>
<s:VGroup x="100" y="8" width="100%" gap="5" verticalAlign="top"> <!-- Groupe central-->
<s:HGroup> <!-- Nom prenom-->
<s:Label text="Nom" id="lNom" fontWeight="bold"/>
<s:Label text="Prénom" id="lPrenom" fontWeight="bold"/>
</s:HGroup>
<s:HGroup width="100%"> <!-- Naissance-->
<s:Label text="Naissance" id="lNaissance" />
<s:Label text=" / Age" id="lAge"/>
</s:HGroup>
</s:VGroup >
<s:VGroup x="730" y="0" horizontalAlign="right" verticalAlign="top" paddingLeft="5"> <!-- Modif-->
<s:Label text="Crea" id="lCrea"/>
<s:Label text="Modif" id="lModif"/>
</s:VGroup>
<!-- Partie avec onglet-->
<s:ButtonBar x="0" y="74" dataProvider="{PAT_TB_ARRAY}" change="tbClickEvt(event);"/>
<s:Form x="0" y="94" id="foPerso" width="100%" height="100%" includeInLayout="true" includeIn="tb1">
<s:layout>
<s:FormLayout gap="3" paddingLeft="0"/>
</s:layout>
<s:HGroup width="100%" gap="3" horizontalAlign="left" resizeMode="noScale"
verticalAlign="baseline" >
<s:DropDownList id="cbQualite" dataProvider="{DP_PAT_CIVIL}"/>
<s:FormItem label="Nom" >
<s:TextInput id="fdNom" width="200" focusColor="#D55E5E" focusEnabled="true"
tabIndex="1" text="Mon nom"/>
</s:FormItem>
<s:FormItem label="Prénom" >
<s:TextInput id="fdPrenom" width="200" tabIndex="2"/>
</s:FormItem>
<s:DropDownList id="cbDossier1" dataProvider="{DP_PAT_DOS1}" width="118" height="22" tabIndex="3"/>
<s:FormItem label="" >
<s:TextInput id="fDossier1" width="90" paddingRight="5" tabIndex="4"/>
</s:FormItem>
</s:HGroup>
<s:Group>
<s:FormItem label="Naissance" tabIndex="5" >
<mx:DateField id="dfNaissance" width="100" editable="true" formatString="DD/MM/YYYY" yearNavigationEnabled="true"/>
</s:FormItem>
<s:RadioButton x="90" y="0" label="Masculin" group="{rbsex}" tabIndex="6"/>
<s:RadioButton x="170" y="0" label="Féminin" group="{rbsex}" tabIndex="7"/>
<s:DropDownList id="cbDossier2" x="340" y="0" width="118" height="22"
dataProvider="{DP_PAT_DOS1}" tabIndex="8"/>
<s:FormItem x="460" y="0" label="" tabIndex="9">
<s:TextInput id="fDossier2" width="90" paddingRight="5"/>
</s:FormItem>
</s:Group>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Qualité" tabIndex="10">
<s:DropDownList id="cbQualiteParent" width="130"/>
</s:FormItem>
<s:FormItem label="Nom" tabIndex="11">
<s:TextInput id="tiNomPar" width="200" text="NomParent"/>
</s:FormItem>
<s:FormItem label="Prénom" tabIndex="12">
<s:helpContent>
<s:VGroup>
<s:Label text="Prénom du responsable" />
</s:VGroup>
</s:helpContent>
<s:TextInput id="tiPrenomPAr" width="200"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Adresse par défaut" tabIndex="12" >
<s:DropDownList id="cbAdrDef" dataProvider="{DP_PAT_ADRDEF}"/>
</s:FormItem>
<s:FormItem label="Adresse" tabIndex="13">
<s:TextInput id="tiAdr1" width="480" text="Adr"/>
<s:TextInput id="tiAdr2" width="480"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Code Postal" tabIndex="14">
<s:TextInput id="tiCP" text="CP" width="65"/>
</s:FormItem>
<s:FormItem label="Ville" tabIndex="15">
<s:TextInput id="tiVille" text="Ville" width="250"/>
</s:FormItem>
<s:FormItem label="Pays" tabIndex="16">
<s:TextInput id="tiPays" text="Pays" width="175"/>
</s:FormItem>
</s:HGroup >
<s:HGroup height="20" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline" paddingTop="5">
<s:Label text="Téléphones"/>
<s:Spacer width="39" height="20"/>
<s:Label text="SMS"/>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:DropDownList id="paTabTel1" dataProvider="{DP_PAT_TEL}" tabIndex="17"/>
<s:CheckBox id="cbSMS1" selected="true" tabIndex="18"/>
<s:TextInput id="paTel1" width="120" text="Tel1" tabIndex="19"/>
<s:TextInput id="paRemTel1" width="480" text="RemTel1" tabIndex="20"/>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:DropDownList id="paTabTel2" dataProvider="{DP_PAT_TEL}" tabIndex="21"/>
<s:CheckBox id="cbSMS2" selected="true" tabIndex="22"/>
<s:TextInput id="paTel2" width="120" text="Tel2" tabIndex="23"/>
<s:TextInput id="paRemTel2" width="480" text="RemTel2" tabIndex="24"/>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:DropDownList id="paTabTel3" dataProvider="{DP_PAT_TEL}" tabIndex="25"/>
<s:CheckBox id="cbSMS3" selected="true" tabIndex="26"/>
<s:TextInput id="paTel3" width="120" text="Tel3" tabIndex="27"/>
<s:TextInput id="paRemTel3" width="480" text="RemTel3" tabIndex="28"/>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Télécopie">
<s:TextInput id="paFax" width="120" text="Fax" tabIndex="29"/>
</s:FormItem>
<s:FormItem label="Email">
<s:TextInput id="paMail" width="333" text="Mail" tabIndex="30"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Prof. des parents">
<s:TextInput id="paProfPar" width="180" text="Prof Par" tabIndex="31"/>
</s:FormItem>
<s:FormItem label="du père">
<s:TextInput id="paProfPere" width="180" text="du père" tabIndex="32"/>
</s:FormItem>
<s:FormItem label="de la mère">
<s:TextInput id="paProfMere" width="180" text="de la mère" tabIndex="33"/>
</s:FormItem>
</s:HGroup>
<s:Line width="100%" height="3"/>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Rub1" >
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR1" width="220" text="Rub1" tabIndex="34"/>
<s:CheckBox id="cbRB1" tabIndex="35"/>
</s:FormItem>
<s:FormItem label="Rub5">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR5" width="220" text="Rub5" tabIndex="36"/>
<s:CheckBox id="cbRB5" tabIndex="37"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Rub2">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR2" width="220" text="Rub2" tabIndex="37"/>
<s:CheckBox id="cbRB2" tabIndex="38"/>
</s:FormItem>
<s:FormItem label="Rub6">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR6" width="220" text="Rub6" tabIndex="39"/>
<s:CheckBox id="cbRB6" tabIndex="40"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Rub3">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR3" width="220" text="Rub3" tabIndex="41"/>
<s:CheckBox id="cbRB3" tabIndex="42"/>
</s:FormItem>
<s:FormItem label="Rub7">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR7" width="220" text="Rub7" tabIndex="43"/>
<s:CheckBox id="cbRB7" tabIndex="44"/>
</s:FormItem>
</s:HGroup>
<s:HGroup width="100%" horizontalAlign="left" resizeMode="noScale" verticalAlign="baseline">
<s:FormItem label="Rub4">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR4" width="220" text="Rub4" tabIndex="45"/>
<s:CheckBox id="cbRB4" tabIndex="46"/>
</s:FormItem>
<s:FormItem label="Rub8">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<s:TextInput id="paUserR8" width="220" text="Rub8" tabIndex="47"/>
<s:CheckBox id="cbRB8" tabIndex="48"/>
</s:FormItem>
</s:HGroup>
</s:Form>
</s:Group>
</windowSkin:NativeTitleWindow>
[/Code]Hello Regina,
That is what I did, and after your answer I checked everything again and I saw I did all right but when embeding the second ALV view by mistake I embeded the first one again.
Now it is working!
Thanks,
Mauricio
Maybe you are looking for
-
What'z the difference between the Commercial Invoices and
What'z the difference between the Commercial Invoices and Invoices/Excise Invoices? Also I understand that we can combine 2~3 invoices and can create one commercial invoice? If it is possible, how to create the same? cheers shalsa007....
-
I want to set up "find my ipad" on my sister's ipad, so we can find each other's iPads. However, this seems to require differing individual cloud email addresses, so one ipad wouldn't recognise the other one. How do I get round this?
-
Problem when creating Drag Tags Dynamically for Drag & Drop UI element
In one of my requirement, I need to populate the TREE dynamically ( only 2 levels fixed), This TABLE TREE is drag enabled ( which acts as a Target & Source ) to move records to another table. Both tables are created at design time and are having DR
-
Send file as attachment via mail
Dear All, I want to send a report (ALV) as attachment to some mail. I am using SO_NEW_DOCUMENT_SEND_API1. Can you please suggest how can I send mail as attachment. I am able to send ALV report as HTML format. I want to send it as attachment. Thanks a
-
Hi Guys, I want to read output of multiple BI queries and show the data in ABAP report. I am looking for any Function module which I can use for this purpose. Please reply Regards Santosh