Laggy Expose??

Why is Expose lagging on SL? It worked so well previous version on both my macs. One is a Macbook 1st gen, 1.83 Intel core duo. The other is a 15" MBP, 2.66ghz bought last week.
Not impressed with Snow Leopard.....

HEY PEOPLE
was surfing around and found this.
Enter this into Terminal.
sudo defaults write /Library/Preferences/com.apple.windowserver Compositor -dict deferredUpdates 0
(sub 0 with 1 to reset) so this is is risk free.
Apparently this disables Beam Syncing. I found it increases the speed of EXPOSE. Any one else used it with positive results?
Message was edited by: Shane Kua

Similar Messages

  • Expose/dashboard/and spaces all laggy

    I may have the answer all ready but i am just checking for other people's opinions i guess.
    I just installed 10.5 on my g4 and the expose/dashboard/spaces features are all really laggy and not nearly as smooth as on my macbook. I think that it is due to the un-upgraded video card. Am i right?
    any thoughts or ideas would be awesome.
    thanks
    Billy

    Streaming video like ustream or youtube seems perfectly normal. but streaming movies from my macbooks itunes is unacceptable.
    I guess i will just have to upgrade . anyway i need a dvi outlet anyway.
    thanks Billy

  • Expose being laggy

    I've been noticing a lag when I open the expose. There isnt a smooth animation anymore. There is a lag even when I hold Shift and press the expose button. It is almost like a frame by frame process. The graphics are fine with other porgrams, its just the expose that has been lagging. I have tried resetting the SMC and PRAM and it hasnt fixed it. If anyone has been experiencing this problem and has found a solutoin, please let me know.

    I got this problem too(plus screen zoom, another animation). Can you tell me what the story before you figure out this laggy. I'm finding the solution to fix this too.

  • Expose animation lag & Dashboard ripple gone after 10.6 on Macbook Pro '08

    I upgraded a Macbook Pro 2008 model (MacBookPro4,1) to OS X 10.6.2 (Snow Leopard), and various animation effects across the OS started having issues.
    1.) Expose animation of windows coming into place is now laggy.
    2.) Dashboard's water ripple effect is gone when adding widgets. Just the widget window zooms in and out in a couple bounces.
    3.) But other animations like the dock Genie effect work fine.
    These were all working perfectly fine on the OS X 10.5.8 installation I just upgraded from. This is the model with the 256 MB GeForce 8600M GT.
    For comparison, I upgraded a Macbook Pro 2007 model with a clean install of Snow Leopard much earlier, and it didn't exhibit any of these issues. Any ideas? This happens even upon fresh reboot (4 GB RAM installed).

    You mustn't use MacKeeper > https://discussions.apple.com/docs/DOC-3036 Uninstall that program > http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    If the problems persist after uninstalling this, it has broken Mac OS X and you have to reinstall Mac OS X. Press Command and R keys while your computer is starting and reinstall Lion

  • Unable to expose a method in web service

    Hi,
    My scenario is to expose a method in service. This method will take date as input & should return all the rows.
    To Implement this, I took employeeVO of HR DB(Employees Table) & created a ViewCriteria "GetEmpbyHireDate" with Hiredate as input param.
    & in AMImpl the code is
    public BaseEmployeeVOImpl getEmployeesByHireDate(Date hiredate){
    BaseEmployeeVOImpl baseEmployeeVO = (BaseEmployeeVOImpl) findViewObject("BaseEmployee1");
    baseEmployeeVO.setApplyViewCriteriaName("GetEmpbyHireDate");
    baseEmployeeVO.setNamedWhereClauseParam("pHireDate", hiredate);
    baseEmployeeVO.executeQuery();
    return baseEmployeeVO;
    The issue is I'm not able to see this method in "Available" list of Web Service Wizard.
    Help me in understanding what is missing ?
    Thanks in advance.
    P.S. from Jdev Help I understood that "Only methods with simple attributes as parameters and return types that are either void or view rows will appear in the list." & my method is returning rows of a EmployeeVO.

    Hi,
    2 comments:
    1) View Criteria can be directly exposed as find methods. Its on the last wizard page (just click the View Criteria tab). So no need for an Impl method
    2) If you wanted to expose a method, then the documentation I think is crystal clear: "oracle.jbo.server.ViewRowImpl or any subtype" Your method returns BaseEmployeeVOImpl (see the difference ?)
    Frank

  • Problems with shutdown, expose and window switching

    Hi there,
    Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
    Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
    I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
    Any thoughts would be gratefully received.
    TIA,
    Mat

    This sounds interesting.
    Can you post a copy for the rest of us to see?
    As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
    Also, are you creating an installer and using that to install? If not, you may wish to try that.
    Try to take over the world!

  • [svn:fx-trunk] 9407: Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties .

    Revision: 9407
    Author:   [email protected]
    Date:     2009-08-19 15:11:34 -0700 (Wed, 19 Aug 2009)
    Log Message:
    Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties.  This states test exposed this.
    We should rethink if we want to clear hostFormat rather than have a hostFormatChanged flag.  If there is no hostFormat at measure then it has to be fixed because there is no line break format to check for auto-size.
    QE notes:
    Doc notes:
    Bugs: SDK-22779
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22779
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as

    Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
    In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
    Basically you can create a sequence simply typing;
    CREATE SEQUENCE MY_SEQUENCE;
    now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
    select MY_SEQUENCE.nextval from dual;
    I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
    Then insert you record and use that number part of your primary key. I think that's it. Have fun.

  • Portege M800 - Exposed Sensitive Touchkeys does not work

    I am owner of the Toshiba Portege M800-105. Everything does its work. After 2 month working on it, my exposed sensitive touchkeys next to the POWER-Button does not work. After I deinstalled the "Vista-Value-Added-Package" everything is working proper. Why? Now my FN-Keys are not working or are diabled. Why?
    Before deinstallation the package, the first button next to the power-button had the function to turn off the backlight from the Logo, from the senitive touchkeys an from my touchpad. NOW it turn off the sound!!!! Fairy weired if you aks me. How can I fix my buttons up to factory settings and get FN-Buttons working?
    I reinstalled the value added package again, and have the save problem as before: the first two buttons next to the power button does not work!
    Unter the Application: Thoshiba Button Support, for the first two buttons there are no Keynames depositd/marked so that I can change there configuration.
    FN-Keys works after installation the package, though not the sensitive keys! Please, who can help me?
    The Value Added Package has small programs. One of them is the Toshiba Button Support. Whenn I deinstall it everything works. When I install it, nothing works.
    Thank you for Help on [email protected]
    Message was edited by: Togan_1

    Hello guys
    The whole thing is really strange. I really dont know what happen on your notebooks. The fact is that those buttons are controlled by software. If I am remembering well it called Button support or Button control and it is part of Value Added Package.
    VAP contains several different tools and utilities. When you remove VAP it will be removed the application responsible for FN functionality (Flashcards) and this is the reason why the FN doesnt work anymore.
    So, theoretically everything should be OK when you install VAP again. I repeat theoretically. Why you still have this problem I dont know and I dont believe nobody can say for sure. Maybe some registry entries are corrupted now? Who knows?
    I presume you dont want to use most radical solution and make clean OS installation again but this can definitely help. With clean preinstalled OS (factory settings) everything will work well again.
    At the end I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all buttons work properly. I still use preinstalled Vista version and I didnt made any changes. It works well.

  • How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

    Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
    In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with  Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
    to Public URL = "proxy URL".
    In Host Named Site Collections,  alternate access mappings  are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
    URL is associated.  This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
    point HNSC to respond  to a different URL(proxy URL). Consequently, Share Point URLs are exposed to  external users.
    Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If  hiding the internal Share Point URLS is a requirement,
    it suggests to use a web application instead of host named site collections.
    Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
    http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
    Excerpt from above article-
    "Host Named Site Collections Only Use One Host Name
    Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
    are always considered to be in the Default zone.  This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
    as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
    calls to the same URL.  If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

    Hi Satish,
    You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
    It is by design that each host-name site collection only support one URL for each zone.
    The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
    https://support.microsoft.com/en-us/kb/2826457
    So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Try expose svn via http, but Location directive does not work.

    Hello everyone,
    I used svn exposed via http in OSX 10.6 and 10.7 using collabnet.
    Now I take OSX server 10.8 and installed svn inside XCode.
    SVN is correctly installed, apache respond to default site.
    I copied the modules dav_svn_module and authz_svn_module compiled on my machine with same svn version of XCode [version 1.6.18 (r1303927)] .
    I created a file into /etc/apache2/other called svn.conf that contain follow code:
    LoadModule dav_svn_module libexec/apache2/mod_dav_svn.so
    LoadModule authz_svn_module libexec/apache2/mod_authz_svn.so
    <Location /repo>
      DAV svn
      SVNPath '/Volumes/VMware HD/svn/repository'
    </Location>
    Checking if module are loaded with sudo apachectl -t -D DUMP_MODULES i obtain:
    Loaded Modules:
    dav_svn_module (shared)
    authz_svn_module (shared)
    Syntax OK
    So file svn.conf is loaded and the module too.
    When I try to check via browser with http://localhost/repo I obtain in /var/log/apache2/error_log the following error:
    [Wed Feb 13 12:41:12 2013] [error] [client 192.168.1.114] File does not exist: /Library/Server/Web/Data/Sites/Default/repo
    Is Location directive failing?!
    How can I expose the right repository location instead of default site?

    Oeren,
    I stumbled across this little tidbit buried in the BI Publisher forum: Dynamic Images in rtf
    Glad you are up and running!
    Joshua

  • Web Service - Expose BI data

    Hi,
    We are in BI 7, trying to expose BI data using QUERY_VIEW_DATA.
    I did basic configurations using Tcode - SICF.
    In WSADMIN, when I execute
    " Web Service QUERY_VIEW_DATA default_host/sap/bc/srt/rfc/sap/ QUERY_VIEW_DATA " getting following error message:
    "You are not authorized to view the requested resource"
    Also verified with basis team the J2EE server address, They confirmed my configuration values correct in Tcode - WSADMIN (goto--> Administration Settings), Soap runtime version is - v1.00_final_6.40
    Is there any basic documents available to verify existing configuration.., also what are the Authorization objects required to perform this.
    Appreciate, if any documents or solution provided to over come above issue.
    Thanks,
    Madhu

    Hi Arun,
    Thanks for Information. After Adding WSNavigatorRole, previous error is not coming.
    Now there is new error : Cannot download WSDL from http://...servername.com:port/sap/bc/srt/rfc/sap/QUERY_VIEW_DATA?sap-client=020&wsdl=1.1: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator .
    If we call  the above URL directly, you will be able to access the file.
    What might be the issue...
    Thanks in advance,
    Madhu

  • Why is Expose lagging for Snow Leopard only in my account, not in guest account? How do i solve it?

    I installed an itunes update and somehow my 'expose' starts to lag, not being as smooth as before. I don't know how this can be linked to me updating itunes but somehow i think it is. Does anyone have a solution to this problem?

    Expose requires a lot of system resources and it is posible that you may have a program or programs on your account that are running in the background using a lot of these resources. If you open Activity Monitor and look at the tabs on the bottom and if you click on CPU and Memory and notice that FREE does not have a lot of space than that might be the issue and if you look above that on the charts you may see some apps that are using a lot of these resources and you may wish to close them.
    Stephen C.

  • BizTalk exposed WCF 403 - Forbidden: Access is denied WCF

    Im using BizTalk server 2010.cretaed Certificate in IIS and shared to client the same as a public cert.
     Im using httpsTransport with customBinding.followed below url
    http://blogs.msdn.com/b/bizintegration1/archive/2011/08/23/exposing-biztalk-orchestration-as-a-wcf-service-over-ssl.aspx
    When I try to Browse in BizTalk server with https, im able to browse, but in the client side, they are not able to browse
    and they get "403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied." Is there anythng that needs to be set in BizTalk or the settings should be done at the client end?
    IIS autehntification mode is anonymous is configued.plz let me know anything to do in biztalk and IIS level
    Regards BizTalkWorship

    This is because your client has not provided the certificate while browsing the service URL.
    If they (client) have installed the certificate in correct folder and then while browsing folder the service, client should provide the certificate through browser.
    For Internet Explorer, a pop-up should with all the certificates
    installed in their personal store. They need to select the certificate that they already installed in it.
    Look into this article (from
    On the client side: section onwards) for how to browse the service from IE by providing the certificate.
    http://blogs.msdn.com/b/asiatech/archive/2014/02/13/how-to-configure-iis-client-certificate-mapping-authentication-for-iis7.aspx
    Note: Above article is just relavant to you from
    On the client side: section onwards i.e for instructing your client to use certificate while browsing.
    FireFox
    You will get an error that says “HTTP Error 403.7 – Forbidden” “The page you are attempting to access requires your browser to have a Secure Sockets Layer (SSL)
    client certificate that the Web server recognizes.”
    In
    FireFox go to Tools –> Options –> Advanced –> Encryption –> View Certificates
    Click import and select the certificate with private key file you exported earlier (the .pfx file)
    You will need to clear history now or restart browser
    Just FYI for installing certifate correctly in client side, if they use Windows (off-course):
    MMC, add certificate snap-in for “current user”
    Browse to Certificates (Current User) –> Personal –> Certificates
    Right click this node and select All Tasks and Import from the popup menu
    Follow the steps in the wizard, selecting the public certificate you have shared o client.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • New to the game, expose help.

    New to the mac game here, some mac experience otherwise though. Anyways so I've got my shiny macbok pro here and I want to expose my windows, I know I hit F9 to get that going, but it brings up the lighting for the backlit keyboard.... what do I do.

    Welcome to the Apple discussions.
    As louie points out, your MacBook Pro questions really should be posted in the MacBook Pro area at http://discussions.apple.com/category.jspa?categoryID=190

  • Problem with Expose and Adobe AIR application -can't click on app in Expose

    I just installed a new Adobe AIR application called TwitterLocal. The app was working fine until I accidently hit some keyboard shortcut and the application window disappeared. I figured I accidently assigned the window to some other "space," however I do not have SPACES turned on. Furthermore, when I select EXPOSE, I can now see the content of the application's window, however if I click on the app (which takes on that grey-highlight appearance when you mouse over it) the desktop returns to its normal position. I can see via the top status bar that the app is currently selected, but I cannot access the app window.
    Is there any way to send an app that was "sent" to expose back to the normal desktop? I've tried rebooting and even uninstalling/reinstalling the app but it is still lost in expose.
    Any thoughts on this would greatly be appreciated.

    Solution was to change display to lower resolution, then the Adobe AIR app TwitterLocal became visible on the standard desktop and I was able to click on and move the app window towards the left of the desktop. Once I switched the resolution back, everything was ok.

Maybe you are looking for