Laggy window performance with external monitor and USB hub after 8.1 -- possible cause found

I have the Yoga 11s which I've been using in conjunction with a Plugable UD-3900 for a few weeks now. Everything has worked very well, especially with external display, keyboard, mouse, and ethernet plugged into the hub.
After upgrading to 8.1 the other day, I began getting very noticeable window and mouse lag on the external monitor. Dragging windows would jump around, aero peek renders were slow, and the 'ribbon' screen saver would pixelate and was slow to wake up.
I installed the updated DisplayLink drivers, and also all the updated Lenovo drivers, but the problem remained. This morning I was trying different ideas and found something very interesting:
The configuration I use when attached to the UD-3900 is to have the keyboard flipped under and the display flipped up in the "stand" so I can use it as a second monitor. Of course when you do that, the Yoga turns off the keyboard & touchpad so they don't get accidentally pressed.
Just for kicks, I decided to flip the keyboard back around and try using the touchpad to move windows around on the extended monitor. Surprise: the laggy window dragging and rendering was gone. And then even more surprising, when going back to the wireless mouse while still in 'laptop' configuration, everything continued to work well -- no lag.
I thought maybe it was an incompatibility with the Logitech wireless USB keyboard/mouse itself, so I disconnected it. However, I also have a bluetooth Microsoft mouse, and it does the exact same thing: With laptop keyboard flipped back & disabled, window drags & aero peek renders lag. As soon as I activate the touchpad, lag is gone, and the BT mouse behaves normally.
So, it seems to be some kind of interaction between the automatic disabling of the Yoga's keyboard/touchpad and any external mouse. Has anyone else seen anything similar? Any ideas on how to solve so I can use the Yoga in the stand configuration?

Just to close the loop on this, I've determined that the cause of my issue is the Intel Dynamic Platform and Thermal Framework software/driver. I've disabled in the BIOS for now, and the machine is working very well. Will look for an update from Lenovo to address more definitively.

Similar Messages

Using the GT70 with external monitor and lid closed

I wasn't sure where to post this question.
I have several laptops and use external monitors. I close the lid on the laptops and the display continues to work.
On the GT70, the system shuts down. It won't allow me to use the external keyboard and mouse or display the session.
Any suggestions if there is a configuration option to allow the GT70 to continue to function with external monitor and lid closed.

Yup. This is a windows setting. You need to go into your control panel -> power options -> "Choose when the computer sleeps" and "Choose what closing the lid does"
That should solve the problem. I currently have my GT70 hooked up to a 42" TV and I can close the lid and it stays on and the TV continues displaying as well. No problems. =]

MacBook Pro with external monitor and keyboard.

Hello, everyone.
I've tried to find the answer for this question but haven't found a clear answer with my Google search.
My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
Thank you in advance for your answers.
Joseph

Hi Niel,
I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
Thanks!
P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
Message was edited by: qwertyphd

Using the MacBook Pro with external Monitor and Keyboard

This may be a dumb question, but here it goes anyway:
Can I use the MacBook Pro with an external monitor and a bluetooth keyboard and mouse without having it opened all of the time ?
I am planning to buy a MacBook for my wife and most of the time she will be using it at her home office.
I don't want her to use the computer opened all of the time when she is actually looking at the separate screen and using a separate keyboard. Having the laptop opened will only accumulate dust and reduce the lifetime of the built in screen.
What I would actually need is a kind of "docking station", but Apple doesn't make that - I know.
So can the MacBook at least be operated without the internal screen powered on while it is closed?
Thanks for your help
Martin
Message was edited by: mdopp

Yes - it's called clamshell mode:
http://support.apple.com/kb/HT3131

MacBook Air with external monitor and wired network

Hello,
I'm investigating the possibility to buy a MacBook Air 13", but I have a big doubt: most of the time I work in office, with wired LAN and an external DVI monitor.
I've seen that I can buy an USB to LAN adapter and a DisplayPort to DVI to connect to the Thunderbolt port, but in this case I will have only one USB port free a no other Thunderbolt.
Is anybody advising a different set of periferals to deal with this environment?
I haven't found any Thunderbolt "HUB" around, does this exist, to multiply the Thunderbolt port?
Thank in advance for any advice
Massimiliano

Naturally yes .. The problem is not the USB itsself, but the fact that original adapters from Apple (LAN and DVI) are made from a Thunderbolt connector, and they do not replicate the port where they are connected to.
Others party LAN adapters that comes on USB port are only 10/100 Mbs, whilst the Apple's one is a Gigabit. This is why I asked for some sort of Thnderbolt hub, or any other experinced advice..
I know that the MacBookAir comes with a good 802.11n integrated wireless, but as you know (or can imagine), when you are in the office a Gigabit connection is another movie, especially if you are tranferring large amount of data or are connected to huge centralized databases.
I was preferring a MacBook Air to the pro for it's monitor: for me a 1440x900 is much more better than a 1280x800 when I'm out of office. On the other hand, the version with the retina display is at the moment too expensive for my budget.
The final solution could be a MacBook pro 15", but I was preferring the 13" when in mobility, for its form-factor.

Probems with external monitor and Nvidia Ion on Netbook

After I updated yesterday, I can't use my external monitor properly anymore. Before, I only had to plug in a monitor and everything worked fine, now everything is displayed twice, on both monitors simultaneously.
I tried using nvidia-settings to change the settings, which told me
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
, but after running nvidia-xconfig, xserver didn't start anymore, so I deleted the file that had been created.
Now I don't know where (and to what) to change my settings so I can use my external monitor again.

Reposting from AskDifferent forum. If you have the newer MBA that include USB 3.0 ports, you are in luck. There are now USB 3.0 to GigE adaptors, freeing you to use the Thuderbolt port for external display.
Search for the USB31000S by StarTech
http://intrl.startech.com/Networking-IO/Adapter-Cards/USB-3-to-Gigabit-Ethernet- NIC-Network-Adapter~USB31000S
Sadly, for those of us with mid-2011 MBA, it's either buy the $1K Apple display or live with 100BaseT...

T430s 2352CTO 2 external monitors and laptop's LCD - is it possible?

Hello,
I'm new to this forum, actually this is my first post, but I've been reading it for a while. I searched and searched and read till I'm blue in my face plus ran bunch of experiments and still can't figure out the issue.
this article clearly states it is possible to run triple display setup (assuming 1 of them is laptop's LCD) and 2 others are on Display Ports. http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT074304
But in my experience it is impossible.
I have 2 identical ViewSonic monitors (VG2236) connected to a Mini Dock Plus (433815U) via Display Port to DVI cables. In this configuration I can only use these two monitors or one of them in conjunction with laptop's LCD.
Windows display utility recognises all three displays but will shut the third one down if I try to extend the desktop to more than 2.
Please confirm that this configuration is possible or what am I doing wrong.
I really need to be able to use laptop's LCD and 2 external dispays for my work, that's the reason I bought the i7 version with descrete graphics
Thanks,
Sergei

You'll want to make sure you have all of the most recent drivers and BIOS updates installed.
If that doesn't work, please take a look at this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Multiple-monitors-with-T430s-Nvidia/td-p/77...
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Thinkpad W520 with Minidock+ Series 3 - Dual monitors and USB fail sporadically

Hello there,
I wonder if anyone has experienced problems ThinkPad W520 and Mini Dock Plus Series 3 (Part number: 433830U)? I run into problems with dual monitor and USB devices.
For dual monitor setup, sometimes only a single monitor is detected, sometimes no monitors are available in the NVidia control panel. Rigorous display detection doesn't help. Disabling Optimus in BIOS doesn't seem to affect it. After I dock and undock couple of times, reboot, unplug the power cord, it seems to resolve and both monitors work fine.
Also, I run into troubles with USB devices (keyboard/mouse). Sometimes they are not detected at all, but if I plug them into different USB ports on the mini dock, they are detected and work fine.
For me this problem happens about 50% of the time when I dock... Any ideas, insights or suggestions are greatly appreciated. Could it be a faulty Thinkpad, docking station or may be both? I really to upgrade next time to W530, but I've been through so many problems with W520, so I don't know if it's a good idea...
Thanks so much.
Solved!
Go to Solution.

If system update isn't finding anything, and the system works just fine on its own, it could potentially be a faulty Dock.
It could be overloaded. Could you try testing the dock using just one monitor, and no keyboard or mouse, to see if you run into the same issue. It would still be a faulty dock, but it may be a potential workaround for the time being.

FCP Problem with Firewire output to external monitor and speaker ???Help

i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermac

CaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day.

[solved] ThinkPad connect with extern Monitor Problem

Hello community
I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
I have made an .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#xrandr --output DP2 --auto --output LVDS --right-of LVDS
#xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
xrandr -d DP2 -s 1900x1200
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
and here is my Xorg.0.log
[ 81.298]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 81.298] X Protocol Version 11, Revision 0
[ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
[ 81.299] Build Date: 27 August 2012 08:04:39AM
[ 81.299]
[ 81.299] Current version of pixman: 0.26.2
[ 81.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
[ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 81.308] (==) No Layout section. Using the first Screen section.
[ 81.308] (==) No screen section available. Using defaults.
[ 81.308] (**) |-->Screen "Default Screen Section" (0)
[ 81.308] (**) | |-->Monitor "<default monitor>"
[ 81.308] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 81.308] (==) Automatically adding devices
[ 81.308] (==) Automatically enabling devices
[ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 81.308] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 81.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.308] (II) Loader magic: 0x7c8b00
[ 81.308] (II) Module ABI versions:
[ 81.308] X.Org ANSI C Emulation: 0.4
[ 81.308] X.Org Video Driver: 12.1
[ 81.308] X.Org XInput driver : 16.0
[ 81.308] X.Org Server Extension : 6.0
[ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
[ 81.308] (II) LoadModule: "extmod"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 81.309] (II) Module extmod: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension MIT-SCREEN-SAVER
[ 81.309] (II) Loading extension XFree86-VidModeExtension
[ 81.309] (II) Loading extension XFree86-DGA
[ 81.309] (II) Loading extension DPMS
[ 81.309] (II) Loading extension XVideo
[ 81.309] (II) Loading extension XVideo-MotionCompensation
[ 81.309] (II) Loading extension X-Resource
[ 81.309] (II) LoadModule: "dbe"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 81.309] (II) Module dbe: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DOUBLE-BUFFER
[ 81.309] (II) LoadModule: "glx"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 81.309] (II) Module glx: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (==) AIGLX enabled
[ 81.309] (II) Loading extension GLX
[ 81.309] (II) LoadModule: "record"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 81.309] (II) Module record: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.13.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension RECORD
[ 81.309] (II) LoadModule: "dri"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 81.309] (II) Module dri: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension XFree86-DRI
[ 81.309] (II) LoadModule: "dri2"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.309] (II) Module dri2: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.2.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DRI2
[ 81.309] (==) Matched intel as autoconfigured driver 0
[ 81.309] (==) Matched vesa as autoconfigured driver 1
[ 81.309] (==) Matched fbdev as autoconfigured driver 2
[ 81.309] (==) Assigned the driver to the xf86ConfigLayout
[ 81.309] (II) LoadModule: "intel"
[ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 81.310] (II) Module intel: vendor="X.Org Foundation"
[ 81.310] compiled for 1.12.4, module version = 2.20.9
[ 81.310] Module class: X.Org Video Driver
[ 81.310] ABI class: X.Org Video Driver, version 12.1
[ 81.310] (II) LoadModule: "vesa"
[ 81.310] (WW) Warning, couldn't open module vesa
[ 81.310] (II) UnloadModule: "vesa"
[ 81.310] (II) Unloading vesa
[ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 81.310] (II) LoadModule: "fbdev"
[ 81.310] (WW) Warning, couldn't open module fbdev
[ 81.310] (II) UnloadModule: "fbdev"
[ 81.310] (II) Unloading fbdev
[ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 81.310] (--) using VT number 7
[ 81.313] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 8
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 9
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.314] (==) intel(0): RGB weight 888
[ 81.314] (==) intel(0): Default visual is TrueColor
[ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 81.314] (**) intel(0): Relaxed fencing enabled
[ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
[ 81.314] (**) intel(0): Triple buffering? enabled
[ 81.314] (**) intel(0): Framebuffer tiled
[ 81.315] (**) intel(0): Pixmaps tiled
[ 81.315] (**) intel(0): 3D buffers tiled
[ 81.315] (**) intel(0): SwapBuffers wait enabled
[ 81.315] (==) intel(0): video overlay key set to 0x101fe
[ 81.315] (II) intel(0): Output LVDS1 has no monitor section
[ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 81.315] (II) intel(0): Output VGA1 has no monitor section
[ 81.340] (II) intel(0): Output HDMI1 has no monitor section
[ 81.380] (II) intel(0): Output DP1 has no monitor section
[ 81.393] (II) intel(0): Output HDMI2 has no monitor section
[ 81.406] (II) intel(0): Output HDMI3 has no monitor section
[ 81.464] (II) intel(0): Output DP2 has no monitor section
[ 81.506] (II) intel(0): Output DP3 has no monitor section
[ 81.507] (II) intel(0): EDID for output LVDS1
[ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
[ 81.507] (II) intel(0): Year: 2010 Week: 33
[ 81.507] (II) intel(0): EDID Version: 1.4
[ 81.507] (II) intel(0): Digital Display Input
[ 81.507] (II) intel(0): 6 bits per channel
[ 81.507] (II) intel(0): Digital interface is undefined
[ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 81.507] (II) intel(0): Gamma: 2.20
[ 81.507] (II) intel(0): No DPMS capabilities specified
[ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.507] (II) intel(0): First detailed timing is preferred mode
[ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
[ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 81.507] (II) intel(0): Manufacturer's mask: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): AUO
[ 81.507] (II) intel(0): B140RW02 V1
[ 81.507] (II) intel(0): EDID (in hex):
[ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
[ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
[ 81.507] (II) intel(0): 21505400000001010101010101010101
[ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
[ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
[ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
[ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
[ 81.507] (II) intel(0): 004231343052573032205631200a00d0
[ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 81.507] (II) intel(0): Printing DDC gathered Modelines:
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 81.508] (II) intel(0): Printing probed modes for output LVDS1
[ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 81.508] (II) intel(0): EDID for output VGA1
[ 81.533] (II) intel(0): EDID for output HDMI1
[ 81.573] (II) intel(0): EDID for output DP1
[ 81.586] (II) intel(0): EDID for output HDMI2
[ 81.600] (II) intel(0): EDID for output HDMI3
[ 81.657] (II) intel(0): EDID for output DP2
[ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
[ 81.657] (II) intel(0): Year: 2011 Week: 33
[ 81.657] (II) intel(0): EDID Version: 1.4
[ 81.657] (II) intel(0): Digital Display Input
[ 81.657] (II) intel(0): 10 bits per channel
[ 81.657] (II) intel(0): Digital interface is DisplayPort
[ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 81.657] (II) intel(0): Gamma: 2.20
[ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.657] (II) intel(0): First detailed timing is preferred mode
[ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
[ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 81.657] (II) intel(0): Supported established timings:
[ 81.657] (II) intel(0): 720x400@70Hz
[ 81.657] (II) intel(0): 640x480@60Hz
[ 81.657] (II) intel(0): 640x480@67Hz
[ 81.657] (II) intel(0): 640x480@72Hz
[ 81.657] (II) intel(0): 640x480@75Hz
[ 81.657] (II) intel(0): 800x600@56Hz
[ 81.657] (II) intel(0): 800x600@60Hz
[ 81.657] (II) intel(0): 800x600@72Hz
[ 81.657] (II) intel(0): 800x600@75Hz
[ 81.657] (II) intel(0): 832x624@75Hz
[ 81.657] (II) intel(0): 1024x768@60Hz
[ 81.657] (II) intel(0): 1024x768@70Hz
[ 81.657] (II) intel(0): 1024x768@75Hz
[ 81.657] (II) intel(0): 1280x1024@75Hz
[ 81.657] (II) intel(0): 1152x864@75Hz
[ 81.657] (II) intel(0): Manufacturer's mask: 0
[ 81.657] (II) intel(0): Supported standard timings:
[ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 81.657] (II) intel(0): Supported detailed timing:
[ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
[ 81.657] (II) intel(0): Monitor name: PA241W
[ 81.657] (II) intel(0): Serial No: 18107120UB
[ 81.657] (II) intel(0): EDID (in hex):
[ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
[ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
[ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
[ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
[ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
[ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
[ 81.657] (II) intel(0): 41323431570a202020202020000000ff
[ 81.657] (II) intel(0): 00313831303731323055420a2020004b
[ 81.657] (II) intel(0): Printing probed modes for output DP2
[ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
[ 81.700] (II) intel(0): EDID for output DP3
[ 81.700] (II) intel(0): Output LVDS1 connected
[ 81.700] (II) intel(0): Output VGA1 disconnected
[ 81.700] (II) intel(0): Output HDMI1 disconnected
[ 81.700] (II) intel(0): Output DP1 disconnected
[ 81.700] (II) intel(0): Output HDMI2 disconnected
[ 81.700] (II) intel(0): Output HDMI3 disconnected
[ 81.700] (II) intel(0): Output DP2 connected
[ 81.700] (II) intel(0): Output DP3 disconnected
[ 81.700] (II) intel(0): Using exact sizes for initial modes
[ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
[ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
[ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
[ 81.700] (**) intel(0): DPI set to (131, 134)
[ 81.700] (II) Loading sub module "fb"
[ 81.700] (II) LoadModule: "fb"
[ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 81.701] (II) Module fb: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.0.0
[ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 81.701] (II) Loading sub module "dri2"
[ 81.701] (II) LoadModule: "dri2"
[ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.701] (II) Module dri2: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.2.0
[ 81.701] ABI class: X.Org Server Extension, version 6.0
[ 81.701] (==) Depth 24 pixmap format is 32 bpp
[ 81.702] (II) intel(0): [DRI2] Setup complete
[ 81.702] (II) intel(0): [DRI2] DRI driver: i965
[ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 81.704] (II) UXA(0): Driver registered support for the following operations:
[ 81.704] (II) solid
[ 81.704] (II) copy
[ 81.704] (II) composite (RENDER acceleration)
[ 81.704] (II) put_image
[ 81.704] (II) get_image
[ 81.704] (==) intel(0): Backing store disabled
[ 81.704] (==) intel(0): Silken mouse enabled
[ 81.704] (II) intel(0): Initializing HW Cursor
[ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 81.707] (==) intel(0): DPMS enabled
[ 81.707] (==) intel(0): Intel XvMC decoder enabled
[ 81.707] (II) intel(0): Set up textured video
[ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 81.707] (==) intel(0): hotplug detection: "enabled"
[ 82.106] (--) RandR disabled
[ 82.107] (II) Initializing built-in extension Generic Event Extension
[ 82.107] (II) Initializing built-in extension SHAPE
[ 82.107] (II) Initializing built-in extension MIT-SHM
[ 82.107] (II) Initializing built-in extension XInputExtension
[ 82.107] (II) Initializing built-in extension XTEST
[ 82.107] (II) Initializing built-in extension BIG-REQUESTS
[ 82.107] (II) Initializing built-in extension SYNC
[ 82.107] (II) Initializing built-in extension XKEYBOARD
[ 82.107] (II) Initializing built-in extension XC-MISC
[ 82.107] (II) Initializing built-in extension SECURITY
[ 82.107] (II) Initializing built-in extension XINERAMA
[ 82.107] (II) Initializing built-in extension XFIXES
[ 82.107] (II) Initializing built-in extension RENDER
[ 82.107] (II) Initializing built-in extension RANDR
[ 82.107] (II) Initializing built-in extension COMPOSITE
[ 82.107] (II) Initializing built-in extension DAMAGE
[ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 82.119] (II) AIGLX: Loaded and initialized i965
[ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
[ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 82.158] (II) LoadModule: "evdev"
[ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 82.159] (II) Module evdev: vendor="X.Org Foundation"
[ 82.159] compiled for 1.12.3.901, module version = 2.7.3
[ 82.159] Module class: X.Org XInput Driver
[ 82.159] ABI class: X.Org XInput driver, version 16.0
[ 82.159] (II) Using input driver 'evdev' for 'Power Button'
[ 82.159] (**) Power Button: always reports core events
[ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 82.159] (--) evdev: Power Button: Found keys
[ 82.159] (II) evdev: Power Button: Configuring as keyboard
[ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 82.160] (**) Option "xkb_rules" "evdev"
[ 82.160] (**) Option "xkb_model" "evdev"
[ 82.160] (**) Option "xkb_layout" "de"
[ 82.160] (**) Option "xkb_variant" "nodeadkeys"
[ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 82.193] (**) Video Bus: always reports core events
[ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 82.193] (--) evdev: Video Bus: Found keys
[ 82.193] (II) evdev: Video Bus: Configuring as keyboard
[ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 82.193] (**) Option "xkb_rules" "evdev"
[ 82.193] (**) Option "xkb_model" "evdev"
[ 82.193] (**) Option "xkb_layout" "de"
[ 82.193] (**) Option "xkb_variant" "nodeadkeys"
[ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 82.195] (II) No input driver specified, ignoring this device.
[ 82.195] (II) This device may have been added with another device file.
[ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
[ 82.195] (**) Sleep Button: always reports core events
[ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 82.195] (--) evdev: Sleep Button: Found keys
[ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
[ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 82.195] (**) Option "xkb_rules" "evdev"
[ 82.196] (**) Option "xkb_model" "evdev"
[ 82.196] (**) Option "xkb_layout" "de"
[ 82.196] (**) Option "xkb_variant" "nodeadkeys"
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 82.197] (II) No input driver specified, ignoring this device.
[ 82.197] (II) This device may have been added with another device file.
[ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
[ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 82.197] (**) Integrated Camera: always reports core events
[ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
[ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[ 82.197] (--) evdev: Integrated Camera: Found keys
[ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
[ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 82.197] (**) Option "xkb_rules" "evdev"
[ 82.197] (**) Option "xkb_model" "evdev"
[ 82.197] (**) Option "xkb_layout" "de"
[ 82.197] (**) Option "xkb_variant" "nodeadkeys"
[ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
[ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.199] (--) evdev: HID 046a:0101: Found relative axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
[ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
[ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
[ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.200] (**) HID 046a:0101: always reports core events
[ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
[ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
[ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.200] (--) evdev: HID 046a:0101: Found relative axes
[ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
[ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
[ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
[ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
[ 82.200] (II) No input driver specified, ignoring this device.
[ 82.200] (II) This device may have been added with another device file.
[ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
[ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 82.200] (**) Option "xkb_rules" "evdev"
[ 82.200] (**) Option "xkb_model" "evdev"
[ 82.200] (**) Option "xkb_layout" "de"
[ 82.200] (**) Option "xkb_variant" "nodeadkeys"
[ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 82.201] (II) LoadModule: "synaptics"
[ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
[ 82.201] compiled for 1.12.2, module version = 1.6.2
[ 82.201] Module class: X.Org XInput Driver
[ 82.201] ABI class: X.Org XInput driver, version 16.0
[ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.201] (**) Option "Device" "/dev/input/event11"
[ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 82.203] (**) Option "TapButton1" "1"
[ 82.203] (**) Option "TapButton2" "2"
[ 82.203] (**) Option "TapButton3" "3"
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 82.204] (II) No input driver specified, ignoring this device.
[ 82.204] (II) This device may have been added with another device file.
[ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
[ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 82.205] (**) ThinkPad Extra Buttons: always reports core events
[ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
[ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[ 82.205] (**) Option "xkb_rules" "evdev"
[ 82.205] (**) Option "xkb_model" "evdev"
[ 82.205] (**) Option "xkb_layout" "de"
[ 82.205] (**) Option "xkb_variant" "nodeadkeys"
[ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 82.222] (II) intel(0): Printing DDC gathered Modelines:
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
[ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 117.767] (II) intel(0): Printing DDC gathered Modelines:
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
I dont know what to do makes the Kernel the Problem?
On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
here is my xrandr
[frank@bullitt ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1600x1200 60.0
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 85.0 75.0 60.0
1440x900 84.8 75.0 59.9
1280x960 85.0 60.0
1360x768 59.8 60.0
1280x800 84.9 74.9 59.8
1152x864 75.0
1280x768 84.8 74.9 59.9
1280x720 60.0
1024x768 85.0 75.1 70.1 60.0
1024x576 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 72.8 75.0 66.7 60.0
720x400 85.0 70.1
640x400 85.1
640x350 85.1
DP3 disconnected (normal left inverted right x axis y axis)
Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
I like arch very much but so it doesnt make fun :-(
I hope someone can help me
the picture shows openbox with the Thunar maximized
Last edited by kerasi (2012-10-12 23:12:12)

@trilby
i use my Laptop at home 95% and at work 5%
so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
i hope i explained it well.
@anoknusa
i change your config to this
xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used. This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file. As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution. Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
what has xrandr to look like for my external monitor and laptop?
and what would the script look like for me?
external 1920x1200
T420 1600x900
and thank you for your patience and have a nice day
ps: i know iam very close to find a solution for my problem
Last edited by kerasi (2012-10-11 00:05:55)

MacBook Pro won't sleep with external monitor

Hello,
have a problem. I'm using external monitor with my MacBook Pro. If I close the lid, I see all windows on external monitor and Yosemite won't sleep. Can you help me please? My external monitor is Samsung 21.5" and I'm connecting it to MacBook Pro via DVI.
Thank you

Hey Renecek,
My first thought was, "Hey, you are using closed-clamshell mode".
How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
But then I realized, wait, you want it to sleep.
For that, check out the suggestions in these articles.
OS X Yosemite: If your Mac won’t go to or stay in sleep
OS X: When your Mac doesn't sleep or wake - Apple Support
Take care,
Nubz

Beyond 2560 x 1440 with External Monitors - is W540 the only Option?

Hello Everyone,
I went through great efforts to upgrade my x201 to a T430s (NVIDIA) in order to drive 3 external monitors from a dock which I finally got to work.
I do this because I like to travel between home and the office, but have equally elaborate set ups with external video and external audio, yet while being able to travel with the same laptop.
I am now experimenting with 2, not 3 monitors, using the new LG 34" curved monitors, which are a bit bigger and display at 3440 x 1440.
The good news is using my T430s I am able to get both monitors to display at 3440 x 1440 and they look great!
The bad news is that if I open up just one too many windows, or drag something across the extended desktop, they are crashing.
When they crash, I lose the signal (DisplayPort) and get error messages from the monitors.
I have already spoken to
1) Lenovo sales
2) Lenovo tech support
3) Lenovo tech support in Atlanta
and no one seems to have any idea what I am talking about.
I am guessing I may need to upgrade from my T430s, which I would rather not do.
I am also guessing that the W540 would have enough graphics / video horsepower to drive at least 2 of these higher resolution monitors?
In an ideal world, I would not have the extra weight or features of the W540, but first and foremost, I want multiple and dazzling high resolution displays from a dock.
Given that I am going from 3 screens down to 2, also wondering if say, an X1 Carbon might drive 2 using a dock?
Or it is only able to drive 2 screens at 1920 x 1080 or 2560 x 1440 best case.
In summary, any advice please:
1) W540 using LG "ultrawide" screens as described above
2) Any other Lenovo laptop not as big or heavy as the W540 which would still have high end, high powered graphics capabilities when docked?
Thank you and best regards,

Thank you for replies so far.
Re Lenovo tech "support" I am a die hard Lenovo fan (4 laptops so far...) but find Lenovo's website confusing and their tech support terrible.
For my T430s, I paid for at least an hour of support to no avail, before discovering that it was a simple Windows update that was the key to driving 3 external monitors, with better information generally coming from this forum. Supposedly, even the T430s with the NVIDIA upgrade can handle 3 external monitors at 2560 x 1440.
Now, however, I would like to use bigger and higher resolution screens, even if it means going from 3 external monitors to only 2.
I have used the T430s and dock, driving 2 of the new Samsung 28" 4K monitors up to 2560 x 1440 without any issues. But moving up to the LG 34 ultrawide screens with 3440 x 1440, I can only run one. With 2 it becomes unstable.
I hope more Lenovo fans tune into the resolution and display quality - it would only enhance the brand.
Even for business only users, with data and text, everything is cleaner, crisper and less fatiguing at the higher resolutions.
ColonelONeill thanks for suggestion but hoping to find an integrated, on board, plug and play, drop into the dock and be done with it solution.
So again, hoping that worst case, the W540 with the highest spec video card could drive 2 of the LG ultrawide monitors without struggling?
Or one of the other newer machines?

Lion, external monitor, and wake from sleep - please help!

For the most part I love Lion. However, the changes they made to the external monitor support are not helpful for me. Let me explain...
I have a 13" 2009 MBP. In my office I use a monitor stand that the laptop can slide into from either the left or the right, and the monitor sits on top. Previously I would simply take my closed MBP in sleep mode, slide it under the stand, and plug everything in. Once the power cord and monitor cable were plugged in, as soon as I inserted something into the USB or SD-Card slot (or I think even the ethernet jack) the laptop would wake from sleep and the monitor would come on.
Now, however, this doesn't happen. My only option is to plug everything in, open the laptop so it wakes up, then close the lid, then slide it into the stand. This is definitely NOT an improvement! Before I had my phone at the left of the monitor stand, and would slide the laptop in from the right. Now, though, I have no choice but to slide it in from the left (after going through the above hassel), which means I had to move the phone off of my desk.
The energy saving preferences have the "wake on network access" box checked, which would make me think that it would wake up as soon as the ethernet cord is plugged in - but no such luck. I also have wireless in the office, but it's hard for it to recognize that when it's in sleep mode.
Has anyone else had this problem? Is there a solution I'm missing here? I'm using a wireless keyboard and wireless mouse, so of course those won't do anything while the computer is asleep.

I'm beginning to hate Lion because of this one problem. It's great that Lion doesn't sleep when you close the laptop with external monitor connected. But I can no longer wake the external monitor with USB mouse movement. I have to open and close the lid. This is very inconvenient when switching between two systems with KVM. The MacBook is awake; it just won't wake the monitor.

No video when using external monitor and resuming from sleep.

I know some people were having problems with the new MacBooks, but I guess the Mac driver fixed something. However, when I'm in Windows and have my Dell 24" hooked up to the Mini DisplayPort -> DVI adapter, I cannot resume from sleep. The monitor will turn on, but I can't get an image on it.
In MacOS it seems to resume from sleep fine, but not in Windows. Anyone else seeing this?
Thanks!

Is no one else getting this error? Does anyone have any issues when their MacBook is hooked up to an external monitor and it goes to sleep?

MacBook Pro freezing with external monitor?

I recently got an external monitor to use with my MBP (early 09). So it seems that if I have my monitor hooked up (and maybe also when my power cable is plugged in) and my computer goes into sleep mode, the whole thing freezes and i have to hard restart my MBP. Is there a reason it is doing this? Also, if i close my MBP, instead of the computer going to sleep, it makes it go into mirror display mode and keeps it running on my external monitor (and sometimes it doesnt even go into sleep mode...). i found this thread - https://discussions.apple.com/thread/3190417?start=165&tstart=0 and it say to use the line:
"sudo nvram boot-args="iog=0x0""
in the terminal to make lion/ML work like SL, but any clue what else that will change?

Hi sgibson,
I'm sorry to hear you are having issues with the external display on your MacBook Pro. I also apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. Are you using the display in extended desktop or mirroring mode? If you are using it in extended desktop mode, is the issue limited to the external display, or does it also freeze the primary display as well? Does the same thing happen if the display is directly connected to the MacBook Pro (i.e. without the dock)? If you continue having issues, you may find the troubleshooting steps outlined in the following article helpful in isolating the cause:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Regards,
- Brenden

Laggy window performance with external monitor and USB hub after 8.1 -- possible cause found

Similar Messages

Maybe you are looking for