LAMBDA and other SPECIAL CHARACTERS
Hello,
Does someone know how to put in a lambda character? I have Framemaker 7.0 and the document I'm working on is non-structured. OS is Win XP Pro. All help and suggestions are greatly appreciated!!!
Hi Bear,
You could also try using the Equations pallete to insert the lambda symbol in para text. Here are the steps you could try:
1. Place the cursor where you want to insert the character.
2. Select Special > Equations
3. From the Equations drop-down list, select New Small eqaution. An Eq frame is added with a ? mark.
4. Click the lambda symbol from the buttons in the Equations palette. ? is replaced by the lambda symbol.
5. Shrinkwrap the equation shortcut Esc m p.
This should insert just the lambda character inline with the para text.
Hope this helps.
Similar Messages
-
10g won't recognize ellipsis and other special characters.
I'm trying to insert data into both VARCHAR2 and CLOB columns that contains characters such as ellipsis and other special characters. Oracle doesn't recognize the characters and just converts it to garbage. Is there a way to make Oracle easily recognize these characters?
For example, it won't recognize the following ellipsis in the string:
"Here we are … right now."My bad...I did look at the national character set instead.
When I performed theq query you posted, I got the following:
NLS_CHARACTERSET
WE8MSWIN1252
NLS_NCHAR_CHARACTERSET
AL16UTF16
I hope this new information helps. Also, the tool involved is SQL *Plus, but I'm currently concentrated on getting the insert to work via JDBC. Thanks in advance. -
Capturing returns and other special characters
Greetings,
I'm curious to know what is 'normally' done to capture
returns and other special characters from textareas. I want my user
to be able to insert 'control' characters into the text area to
allow them to provide some structure to the information they're
entering. At the moment, I'm processing the text char by char and
working out if it's an 'enter' or whatever, then appending a
'<br />' to the string before I store it and so on.
Is there a more established way to do this sort of
thing?Use the replace function to replace either chr(10) or chr(13)
with a break tag. It's using cold fusion functions to accomplish
the same thing you appear to be doing manually. -
E72: Swedish and other special characters not work...
When I send mail through MfE, swedish and other special characters do not reach the recipient, they are just ignored. No blanks or nothing. Every word with a swedish character ends up one letter short.
Before the firmware upgrade this was intermittent, happening only on about half of my mails.
Now I upgraded yesterday, and it seems the problem is now permanent.
Have seen similar posts from E75 and E90 owners, their problems seem to have been fixed by newer firmware.
Our setup is: Exchange 2003, Portwise authentication.
All other phone models work fine, like iPhone, E71 etc.
/SebastianAfter some testing I found out that if I use swedish chars in the subject line, it works fine. Even in the mail body.
If I don't use swedish chars in the subject, they won't work in the body. I either get garbage or nothing where the swedish chars should be.
The problem doesn't exist at all in my private IMAP mail account.
Could someone who uses Mail for Exchange and have special chars in their alphabet (swedish, finnish, german, hungarian etc) pls tell me how it's working out for you?
Message Edited by Seb_Martin on 28-Jan-2010 11:15 AM -
Storing carriage return and other special characters in a TestStand variable and passing to LabVIEW
I am using TestStand step to call a LabVIEW VI that writes commands to a serial device. The device expects a carriage return at the end of the command. I can create a constant string in TestStand with the carriage return, e.g., "ATA\x0D" and pass that to a LabVIEW string control which shows ATA\r and the VI works properly.
To provide consistency and flexibility in my code, I want to store the terminator character(s) in a TestStand variable. However, when I try to use an expression to create the command string, i.e. "ATA" + "Locals.Terminator", where Locals.Terminator is set to "\x0D", my LabVIEW VI string control shows "ATA\\x0D" which doesn't work. And when I try Locals.Terminator set to "\r", the LabVIEW string control shows "ATA\\r" which doesn't work either.
Is there a way to store special characters in a TestStand variable and pass them to LabVIEW as special characters? I saw in another post that if you edit the TestStand variable by pressing Cntl-Enter, it will store the newline \n properly and it can be sent to LabVIEW - that works for me as well for \n. But I need to send a carriage return.
I've attached my test sequence and the corresponding LabVIEW VI with a string control.
Hans
Attachments:
Special Chars.seq 27 KB
String Passing.vi 13 KBHi Hans,
Thanks for your detailed explanation and examples. In TestStand, change the String parameter's String Type to Binary String instead of ASCII. Then it will pass the desired value.
Cheers,
David Goldberg
National Instruments
Software R&D -
Facelets: Issue with and other special characters
We are trying to use facelets for our JSF based project. If we use in the included jsf pages these are not rendered properly in the resultant page. The resulting page eats all the
layout file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:ui="http://java.sun.com/jsf/facelets"
<f:loadBundle basename="bundle.MessageBundle" var="res" />
<head>
<title>
<ui:insert name="title">Foo</ui:insert>
</title>
<sm:html-base target="_top" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<link href="styles/default.css" rel="stylesheet" type="text/css" />
<script language="javascript" type="text/javascript" src="scripts/main.js" />
</head>
<frameset rows="80,*,22" cols="*" framespacing="0" frameborder="no" border="0">
<ui:insert name="header">
<frame name="header" src="common/header.jsf" scrolling="no" noresize="yes" />
</ui:insert>
<frameset rows="*" cols="187,*" framespacing="0" frameborder="no" border="0">
<frame name="navigation" src="tree/tree.jsf" scrolling="auto" />
<ui:insert name="content">
<frame name="content" src="" scrolling="yes" />
</ui:insert>
</frameset>
<ui:insert name="footer">
<frame name="footer" src="common/footer.jsp" scrolling="no" noresize="yes" />
</ui:insert>
</frameset>
<noframes>
This browser does not support frames
</noframes>
</html>
~
In header.jsf
<td align="right" valign="middle" nowrap="yes">Start <img src="images/seperatorGrey.gif"/> Tools <img src="images/seperatorGrey.gif"/> Support <img src="images/seperatorGrey.gif"/> Logoff </td>Thank you both for replies ....
Since these urls are generated through code, what is the best way to go about it ?
Could you please explain a little about using of hash map in this case?
and excpet using escape characters, is there any other way to do it ?
Thanks again -
I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 + digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!
I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 + digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!
-
Vbscript to rename files and replace special characters
Dear Exprt,
would you please help to add addtional requirement for rename and replace special characters for file
by the below script i can re name.
strAnswer = InputBox("Please enter folder location to rename files:", _
"File rename")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
If FSO.FolderExists(strAnswer) Then
visitFolder(FSO.getFolder(strAnswer))
End If
[email protected]Thx would you please look below what wrong in its run nothing happend no error
strAnswer = InputBox("Please enter folder location to rename files:", _
"Test")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Set regEx = New RegExp
'Your pattern here
Select Case tmpChar
Case "&"
changeTo = " and "
Case "/"
changeTo = "_"
Case Else
changeTo = " "
End Select
regEx.Pattern = tmpChar
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
fileToRename.Name = regEx.Replace(fileToRename.Name, tmpChar)
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
[email protected] -
Getting rid of single quotes and other bad characters
Hello All-
I am writing a servlet that takes a value from a form, and saves it to a database. However, when single quotes, and other illegal characters are entered, i get all sorts of errors. I am certain their is some function that would take care of all of this.
Help!Hi there,
When you try to insert single quotes into the database it gives an error or problem because a single quote is a reserved character in the database.
If you want to store a single quote or any other character that is reserved in the database then you need to find out how to escape that reserved character.
One option is to use the single quote twice, so instead of ' , use '' (not double quote but , type single quote twice).
Another option is to use HTML entity code for single quote
"Message was edited by:
appy77 -
Dynamic Images in PDF and Escaping Special Characters
I used the following to create my own PDFs with dymnamic images:
http://marcsewtz.blogspot.com/2012_02_01_archive.html (Dynamic Images in PDF - What 32k Limit? )
I have installed this application on Oracle's free workspace to test.
The issue I am having is that when there is a special character in the description, such as <>'"& then the the PDF will not open. I have tried using the dmbs_xmlgen.convert to convert the description but haven't had any luck.
I'm a complete novice with xml. Any help with this is greatly appreciated.
Thanks,
GlenI have been able to find a solution, but it's not completely perfect. I have changed the "description" field as follows:
XMLCdata(replace(description,''&'',''and'')) description,
The characters greater than (>), less than (<), single qoute('), and double quote (") can now all be in the description and will not cause errors. For some reason, I couldn't get the & not to give an error no matter what I tried, so I just replaced the & with the word "and". This solution will work for my needs, but it would be nice to be able to get the & to display.
Does anyone know of a way to get the & to display correctly?
Thanks again,
Glen
The complete code I am using is below:
declare
l_print_layout clob;
l_xml_data clob;
begin
-- load print layout from database
for c1 in (
select layout from eba_pdfimg_layouts where id = :P1_LAYOUT
) loop
l_print_layout := wwv_flow_utilities.blob_to_clob(c1.layout );
end loop;
-- generate XML data
for c2 in (
select dbms_xmlgen.getxml('
select
id,
file_name,
mime_type,
XMLCdata(replace(description,''&'',''and'')) description,
-- description,
blob2clobase64(image,''Y'') image
from eba_pdfimg_images
') xml_data from dual
) loop
l_xml_data := c2.xml_data;
end loop;
-- download print document
wwv_flow.g_page_text_generated := true;
apex_util.download_print_document (
p_file_name => 'image_demo',
p_content_disposition => 'ATTACHMENT',
p_report_data => l_xml_data ,
p_report_layout => l_print_layout,
p_report_layout_type => 'rtf',
p_document_format => :P1_FORMAT
end; -
Reading and writing Special Characters to Oracle DB
Hi All,
I need to insert data from CSV to Oracle DB and then use the same data for creating XML file in UTF-8 format.
I have few fields in the CSV file which has � and � special characters. I'm able to read � and write in UTF-8 , but the same procedure is resulting in some other ascii character for �.
While reading data from CSV file :
Reader l_fileReader = new InputStreamReader(p_in,"ISO-8859-1");
Can anyone help me.
Thanks,
Ramki.Does anyone has some pointers or clues?
-
How to define and use special characters
I need to define some special characters (such as an up-arrow and a down-arrow). I need to add these characters to Strings along with "normal" ASCII characters, and finally display the Strings with graphics.drawString().
Can anyone get me started or tell me where to look? I looked at the archive but apparently I'm not using the correct keywords.
Thanks in advance, Rickpublic void paint(Graphics g) {
super.paint(g);
g.drawString("up arrow: \u2191 down arrow: \u2193", 100, 100);
}Works for me.
See www.unicode.org for code charts. -
Identify and show Special Characters in the SQL result set
Hi all,
The values in a column (SC - colunm name) has special characters. For eg. 496+>9, 223'32, 167&45. Is there any function in Oracle that would give me the below result when i query that colum.
select SC from xyz;
Result should be as follows:
496+>9
223'32
167&45
Thanks in advance.yes it will have numbers and characters also along with the special characters
The results from my previous post was wrong. Here is the expected results;
496+>9
223'32
167&45
can you give me the exact query to get the above resultant.
Thank you -
Just started using apple mail. Trying to set up email folders with example: Company/Company P.O. It won't let me do it. It will not allow / or . . What am I doing wrong or can this not be done. I tried to use the Edit menu and adding the special characters, but it still won't work. Please advise. mmather
-
Forms and Czech special characters
Hello everybody,
I created a form to update calendar events. I used Czech language to made labels of inputs in the form. Czech special characters aren't display correctly. Others applications, pages and CAs are OK. Just I have problems with forms. The characters are replaced with senseless characters and if I save the form again, the sensless characters are added. So I have longer and longer strings there.
I found that the labels are saved in the table "WWA_FORM_ITEMS$". So I changed them directly in this table. But you know, it's annoying.
Does anybody knows if there is more comfortable solution?
I'm using Portal 3.0.8 and database 8.1.7.
Thanks for any answer. You can use also this address: [email protected]
Petra :)again.
Hi Petra,
i've had the same problem with german characters. As far as I know it is a bug
(either in Portal or in Interner Explorer).
You can use Netscape to design your forms or (that's how I do it) use the
html equivalent for your letter. For example instead of "ä" (or d) use "& a u m l ;"
(without the blanks - I hope that this will be displayed correctly).
Regards Oliver
Maybe you are looking for
-
I was updating my phone in itunes and the "update went wrong" and now the phone is not recognized by itunes. I unattatched the phone and it wont turn on or off, just shows a picture of the itunes symbol and a usb cord. In itunes it says that it is an
-
I am getting ORA-02063 error while copying bulk data from DBLINK
Hi all , I am trying to copy data from DBlink ,whenever i am trying to pull more data ,The db link break down , I have try to put /*+ APPEND */ (Hint) in insert statement.Below is the insert code from my procedure from where i am getting below error
-
some one posted this i tried it twice and it worked!!! (2nd time obviously!!) Can any of you force it into Disk Mode to see if you can get the updater to recognize it? With your iPod not connected to the computer, Reset it for about 5 seconds. Then p
-
HTTP to HTTP Through BPM?
Dear All, please go through the below requirement and let me know your inputs and how do we develop this scenario in XI. Can this scenario be achieved by BPM. I have a Source System (AS400) and Target system (Windows) in between XI is lying. XI has t
-
How to make column tree the ALV
As in normal table we can make column tree by using 'TreeByNestingTableColumn' property, can any one tell me how to do the same in alv. I have used set_hierarchy_column( abap_true ), but i was not able to map all the elements with in a node to other