LAMP Installation = broken mpd

I installed Apache, MySQL, PHP and PHPMyAdmin yesterday in preparation for a project I'll be doing for someone, and now mpd won't start as a daemon; reinstallation didn't help either. Any ideas? Is there some log file I can check to see why it won't start? I tried starting it when httpd wasn't running to see if there's some problem there, but mpd still wouldn't start.
Komodo

raskolnikov wrote:
Log files are in /var/log/httpd/, you should check at least error_log
LAMP works for me, so it may be a configuration issue.
Umm.. well I know where the log files are for apache, but they're unlikely to help me fix mpd I found the .error and .log files for mpd, they're in $HOME/.mpd/ , but they're both empty! This is really frustrating.. what the hell can it be? mpd was fine yesterday.. it connects on the default port, 6600, is it possible that one of the LAMP pieces of software is interfering with this? Yet if that were the case, surely me stopping all the LAMP-related daemons would allow me to start mpd...
The only other thing I've change since yesterday is my /etc/hosts:
127.0.0.1 localhost.localdomain localhost kaminoitte
That's fine though, isn't it?
Gaargh, this is doing my head in :evil:
EDIT: Aah.. it might be a groups problem.. maybe. I've got it in my mpd.conf to run under user 'dave', but I accidentally used 'useradd' instead of 'usermod' yesterday when adding myself to the mysql group I made, so I may be missing from one of the necessary groups. I added myself back to optical and video yesterday.. would someone using mpd be good enough to post 'grep [mpd_username] /etc/groups' for me?
EDIT2 (1 minute later): Hehe, I just noticed I didn't add myself back to 'audio'... what a muppet. Problem solved! XD

Similar Messages

Publisher 6.4 Installation broken

Hi,
I am trying to setup Aqualogic G6 6.1 on a Windows 2003 server.
So far I have had no issues installing Aqualogic Interaction and I was able to get some initial communities setup. However when I then tried to install Publisher 6.4 I started experiencing some strange issues.
If I try to view the Publisher Administration portal I receive an messaging advising the database could not be contacted.
I checked the DB settings and as far as I can tell everything looks okay, I am able to connect with the user credentials I setup during Publisher installation and I can view the tables the Publisher installation created. I also did not experience any issues when importing the Publisher package into the portal.
I checked the log files for Publisher and found something very strange in there, Publisher is trying to connect to the database with a username that is the same as the database name!
It is completely ignoring the information that was provided during installation, instead there are numerous errors in the log file all indicating Publisher and then subsequently, Workflow were unable to connect to the database using a user id <same_as_database>.
This is obviously wrong, I have no idea why this has happened on a fresh build and I am now concerned the whole Aqualogic Installation process seems to random and inconsistent from machine to machine!
Any ideas?
Tahir

Did you get this fixed?
Is this a clean Publisher install or an upgrade? I was able to get Publisher running ok on 6.1 MP1. If this is still not working, I would uninstall Publisher and reinstall it with the same db info as before. Maybe the db settings in the config file got corrupted somehow. If the Pub diag page checks out, everything should be setup ok.

Is the lightroom installer broken ... I cant get the CC version to install

Just upgraded to a new Hard Drive and re installing everything.
I downloaded PS earlier, and that was fine.
I keep getting an error with Lr
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe_Lightroom_x64.msi_5.3 -----------
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624
Any help please
Keith Hart aka ownimage

Hi Keith Hart,
Please refer to this Forum Link.
http://forums.adobe.com/message/5928598#5928598
Hope it helps.
Regards,
Abhijit

IA64 JDK 6u25 installer broken on Win2K3 SP2

The current JDK installer on the download site (jdk-6u25-windows-ia64.exe) will not run on a 64 bit IA machine running Windows 2003 SP 2. Running the exe results in an error popup with message "The image file jdk-6u25-windows-ia64.exe is valid, but is for a machine type other than the current machine." At least two of the archive JDK installers (jdk-6u7-windows-ia64.exe and jdk-6u21-windows-ia64.exe available from http://java.sun.com/products/archive/j2se/6u21/index.html) do not have this error on the same system and install successfully. I wonder did Sun test this installer?
-Robert
Edited by: user7455680 on Apr 27, 2011 2:37 PM

The error seems to occur on 32bit system trying to execute a 64bit executable.
As you have said you are already executed the the u21 and u7 64bit version already without any issues, can you check weather you have changed any properties of the u25 version like "compatibility mode" ( right click on the setup file and select properties and see "Compatibility" tab).
Edited by: venkatasundar on Apr 28, 2011 12:47 AM

Installer broken?

I'm wanting to install trial of Acrobat Pro XI
I downloaded the file AdobeDownloadAssistant.exe but when I run it I get a pop-up as follows

Gee that's helpful - not !
If I could find somewhere to download it from I would.

SIMPLE FIX for XP SP2 Installs

Greetings. I'll cut to the chase and won't explain here in detail what's really going on with this fix, but it has now successfully cleared a range of installation problems for iTunes 5.0, 5.01, and QuickTime 7, on two unrelated XP SP2 systems. Feel free to contact me if you want more info, but you may definitely want to give this a try if you're running XP SP2 and have been having iTunes install problems (be sure that you are logged in with Administrator privileges):
- Click Start
- Click Run
- Enter in the "Open:" field: "services.msc" (without the quotes)
- Click OK
- Scroll down to "Remote Procedure Call (RPC)"
[ NOT "Remote Procedure Call (RPC) Locator" ]
- Double click on this item
- Click the "Log On" tab
- If the "Local System Account" selection is already
selected, this fix won't help you. If the "Local System
Account" selection is NOT selected, SELECT it now.
[ make sure that "Allow service to interact with desktop
is not checked ]
- Click OK
- Close the Services window
- Reboot
- Try reinstall the 5.0 or 5.01 iTunes+QuickTime package
This may also fix a number of other odd XP SP2 behaviors. Good luck!
--Lauren--
Lauren Weinstein
[email protected] or [email protected] or [email protected]
www.pfir.org/lauren
Co-Founder, PFIR
- People For Internet Responsibility - www.pfir.org
Co-Founder, EEPI
- Electronic Entertainment Policy Initiative - www.eepi.org
Moderator, PRIVACY Forum - www.vortex.com
Member, ACM Committee on Computers and Public Policy
Lauren's Blog: lauren.vortex.com
DayThink: daythink.vortex.com

Over time I saw a range of different install problems as I continued trying to find a procedure to get iTunes 5 and/or QuickTime 7 installed on two completely different XP SP2 systems, neither of which initially had an iTunes installation (but both of which had QuickTime 6 installations).
The initial attempt at the (then 5.0) iTunes install resulted in the infamous "vanishing installation" -- the process appeared to proceed normally, but at the end no files had been installed, and the iTunes icon had only appeared for a few seconds. I eventually determined that the installer was failing silently and deleting all of the files it had installed at that point. No error messages were associated with this failure mode -- the installer's failure to be more verbose made this a much more difficult problem to attack (turning on installer logging gave more information, but was not as much help as might have been expected).
Unfortunately, the installer by that time had also mucked around with various QuickTime files and settings, leaving the original QuickTime 6 installation broken as well.
I then found it was impossible to even install the QuickTime 7 standalone, nor could QuickTime 6 be reinstalled. In all cases (even after manual attempts at uninstalling and cleaning up the partial installs, registry cleanups, etc.) the installers would abort ("interrupted") near the very end of their process, and as usual delete their new files.
iTunes 4.9 installs would also fail in much the same manners. However, I ultimately found a way to trick the system into a working 4.9 (except for CDDB support on one of the machines), using a technique that I documented on this forum some days ago.
As I dug through the various logs and errors, I became convinced that a privilege issue was at the heart of the matter -- this also fit with the sorts of changes that SP2 imposed on the system, and later MS security "fixes" that made even more changes.
This led to my researching the sorts of problems that could relate in that area, until I found discussions of a variety of problems caused by RPC-related privilege configuration errors, that can trigger many bizarre XP SP2 behaviors, including installer failures.
The procedure that I noted in the original message of this thread instantly fixed all iTunes and QuickTime installation problems on these systems. Both 5.0 and 5.0.1 installs proceeded perfectly after the change -- I did not test the change with 4.9.
This situation is the fault of both MS and Apple. MS -- for a whole bunch of SP2-related complexities and problems that were unnecessarily introduced, and Apple for apparently not noting the known issues in this area, and failing to take them into account in their installers. Apple also gets low marks in this situation for installer error reporting, and for how they've handled the situation publicly since the problems became known.
--Lauren--

Python with statement is broken.

I am using the default python install which is version 2.5.1. According to the python documentation, support for the following syntax was added in version 2.5 but it does not work on the default apple python install.
with open('filename') as f:
for line in f:
print line
This is supposed to open to automate opening and closing of the file. However the with statement doesnt work and I get a syntax error.
Is this normal or is my python installation broken? If it is normal is there any way to get this syntax enabled?
Message was edited by: keeler1

You need to read the rest of the documentation as support for that keyword is not enabled on versions prior to 2.6 unless you specifically ask for it.
from _future_ import with_statement

PHP works, but CodeIgniter doesn't?

Community,
I've followed both the wiki regarding mysql installation, LAMP installation etc. Added http group and user, configured apache and php. When I run a test file with phpinfo() inside, everything works. But when I try to run my previous codeigniter project, i only get a blank screen in return and then this is what I peek into the logs:
ERROR_LOG
[Thu Jan 27 12:12:13 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
[Thu Jan 27 12:12:13 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jan 27 12:12:13 2011] [notice] Digest: generating secret for digest authentication ...
[Thu Jan 27 12:12:13 2011] [notice] Digest: done
[Thu Jan 27 12:12:14 2011] [notice] Apache/2.2.17 (Unix) mod_ssl/2.2.17 OpenSSL/1.0.0c DAV/2 PHP/5.3.5 with Suhosin-Patch configured -- resuming normal operations
ACCESS_LOG
127.0.0.1 - - [27/Jan/2011:12:14:59 +0100] "GET / HTTP/1.1" 200 1645
127.0.0.1 - - [27/Jan/2011:12:14:59 +0100] "GET /icons/blank.gif HTTP/1.1" 304 -
127.0.0.1 - - [27/Jan/2011:12:14:59 +0100] "GET /icons/folder.gif HTTP/1.1" 304 -
127.0.0.1 - - [27/Jan/2011:12:14:59 +0100] "GET /icons/unknown.gif HTTP/1.1" 304 -
127.0.0.1 - - [27/Jan/2011:12:15:00 +0100] "GET /aikido/ HTTP/1.1" 200 -
127.0.0.1 - - [27/Jan/2011:12:15:02 +0100] "GET /pryzmat/ HTTP/1.1" 200 -
httpd.conf
[root@p1ohost conf]# cat httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks Includes
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks Includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride All
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Miscellaneous
[piotro@p1ohost ~]$ httpd -v
Server version: Apache/2.2.17 (Unix)
Server built: Oct 21 2010 09:11:14
[piotro@p1ohost ~]$ php -v
PHP 5.3.5 with Suhosin-Patch (cli) (built: Jan 6 2011 07:17:24)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies
[piotro@p1ohost ~]$ mysql --version
mysql Ver 14.14 Distrib 5.1.54, for unknown-linux-gnu (x86_64) using readline 6.1
I'm also using CodeIgniter's htacces file:
CI .htaccess
[piotro@p1ohost ~]$ cat /srv/http/pryzmat/.htaccess
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /aikido/
#Removes access to the system folder by users.
#Additionally this will allow you to create a System.php controller,
#previously this would not have been possible.
#'system' can be replaced if you have renamed your system folder.
RewriteCond %{REQUEST_URI} ^system.*
RewriteRule ^(.*)$ /index.php?/$1 [L]
#When your application folder isn't in the system folder
#This snippet prevents user access to the application folder
#Submitted by: Fabdrol
#Rename 'application' to your applications folder name.
RewriteCond %{REQUEST_URI} ^application.*
RewriteRule ^(.*)$ /index.php?/$1 [L]
#Checks to see if the user is attempting to access a valid file,
#such as an image or css document, if this isn't true it sends the
#request to index.php
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php?/$1 [L]
</IfModule>
<IfModule !mod_rewrite.c>
# If we don't have mod_rewrite installed, all 404's
# can be sent to index.php, and everything works as normal.
# Submitted by: ElliotHaughin
ErrorDocument 404 /index.php
</IfModule>
After several hours trying to get my LAMP to work, I'm about to throw my brand new Asus M4A88T-I Deluxe out the window, with that cute quad core processor . Fare well, black box!
...But I thought about a little help from my friends. Any logs I've forgotten about will be supplied, if needed.
Cheers
Update - I've found out that there's nothing wrong with the server. It's something wrong with CI, thus this would make a CI-specific topic. Please delete the topic.
Update 2 and solved - A fresh installation of PHP has the mysql module commented out. Uncomment it in php.ini - and it works Cheers!
Last edited by piotroxp (2011-01-27 14:35:30)

Hi chrispl:
Karsten sent you in the right direction with his post. But, perhaps this will help you as well....
Using MPEG camera clips - like from the Sony Cybershot
http://www.danslagle.com/mac/iMovie/tips_tricks/6018.shtml
Sue

Pear PHP Warnings [SOLVED]

I recently built a web-server and followed the arch wiki docs to complete the LAMP installation and everything ran smoothly.
However, now when I upgrade pear I get the following warnings:
# pear upgrade
PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0
PHP Warning: Module 'mysql' already loaded in Unknown on line 0
anyone else run into this glitch?
Last edited by monash (2011-11-11 03:17:42)

Many thanks SidK!
I checked /etc/php/conf.d and found i had left behind an old custom.ini containing:
extension=mcrypt.so
extension=mysql.so
removed the /etc/php/conf.d/custom.ini and all is well with pear upgrade :-)

Regular Expressions Character Class shortcuts

I have been learning to use regular expressions to modify some of my text files. I noticed that on my ARCH box the Character Class shortcuts do not work e.g. [[:digit:]] in an expression works but \d does not. Is this normal or is my installation broken in some way?

Bebo wrote:
There are several regexp "dialects". It's quite painful actually For instance, as far as I know, \d works in perl, but not in sed or grep.
So, yes, this is normal.
Yeah -- Henry Spencer's regexp stuff is always generally considered the portable form for sed, awk, since they're all based from it. Newer versions of grep though do allow for a -P flag for perl-regexps to be used, but this is non-portable, obviously.
-- Thomas Adam

Install AMS Centos6, libcap required

./installAMS
ERROR: A required package, libcap, was not found on your Linux x86_64 RedHat.
Please install required package and run Adobe Media Server installer again.
[root@ip-10-254-24-40 AMS_5_0_1_r1076]# yum install libcap
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.trouble-free.net
* epel: mirror.pnl.gov
* extras: mirrors.sonic.net
* updates: mirror.5ninesolutions.com
Setting up Install Process
Package libcap-2.16-5.5.el6.x86_64 already installed and latest version
Nothing to do
Its already installed, Installer broken? This is:
cat /proc/version
Linux version 2.6.32-358.0.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Feb 27 06:06:45 UTC 2013
I have contacts at Adobe but they take a very long time to respond.

Hi Mjurek !
You can setup Adobe Flash Media on CentOS 6.3 x64 by follow step:
Setup Libcap Library
#yum -y install libcap
tar -xzf FlashMediaServer4.5_x64.tar.gz
cd FMS_4_5_0_r297
ln -s /lib64/libcap.so.2 libcap.so.1
./installFMS
Work for me, good luck!

Data Modeler 3.0 EA1 - Logical= Attributes & Relational= Columns missing

Hi,
I imported Modeler 2.0 design into Modeler 3.0 EA1 and discovered that LOGICAL=>ATTRIBUTES and RELATIONAL=>COLUMNS options are no longer displayed.
Were these options removed from this new version or is my installation broken?
Thanks
Chiedu

Hi Chiedu,
they are removed. Your version is ok - at least for that :).
Philip

I'm unable to run AppleScript.app after upgrading to Mavericks, is this as it should be, and is there a replacement for AppleScript?

When I navigate to the Applications/Utiilities folder, and attempt to open the AppleScript editor I get an error popup with:
The document "AppleScript Editor.app" could not be opened.
Has AppleScript gone away, or is my OS Installation broken?
Thanks,
CraigP
Ok, so it's broken. Any idea how to un-break it? For example, is there Installation Media for Mavericks that I can burn and attempt a re-install with?

Your installation is broken.

Shipped using Canada Post, but the package is lost? What to do?

Well around a month ago I've shipped a coin to a buyer of mine which cost her around $110, and $15 to ship.
Although the Canada Post workers told me they're unable to find the coin. What do I do?
This is the first time I'm facing an issue such as this.

My loss rate for (receiving) packages, domestic and international is precisely 0%. And I'm talking a lot of packages.
Lots of different venues, especially numerous baby sites the past couple of years, and they're mostly in the US. No issues, except one lampe berger broken due to faulty pkg'ng, and replaced by seller immediately. (returned the rattling box without even opening it)
I opt out of insurance when possible; absolutely no value to me ( or seller).
i had to put in a claim for a missing parcel that I shipped a couple of years ago, but the delayed-somewhere Christmas gift did eventually make its way to Georgia before anything ever came of my claim.
So, my success rate for both receiving and shipping .. 'many' packages is locked on 100%.
(which means I need to go immediately to pray to the goddess of Murphy's Law for continued success in case I've just jinxed myself

[Solved]Drupal setup

Hi all! I'm new in server applications and I'm trying to install drupal to work with it and make web-pages. I read the wiki for install apache mysql and php, but i have an dude. What is the purpose of the drupal package in the comunity repo? Because, it install drupal on /usr/share/webapps and I have to copy them to my "Directoryroot" for apache server, doesn't it?
Maybe, someone can explain me how to setup the config in apache to launch drupal, or it's mandatory copy the drupal's directory to "/srv/http/".
Thank's and excuse my English!!
Last edited by PerisH (2012-06-26 10:35:32)

The config will be very similar to that of phpmyadmin which is installed in the same place. I'll quote some of the steps you need to undertake. Make sure you have a working LAMP installation. Give the drupal wiki a lookover for some info.
wiki wrote:Copy the example configuration file to your httpd configuration directory.
cp /etc/webapps/drupal/apache.example.conf /etc/httpd/conf/extra/httpd-drupal.conf
wiki wrote:
Add the following lines to /etc/httpd/conf/httpd.conf:
# Drupal configuration
Include conf/extra/httpd-drupal.conf
In /etc/webapps/drupal/.htaccess, comment out deny from all. The line should look like this:
#deny from all
wiki wrote:For Drupal 7, also enable a PDO extension for your database. For MySQL, extension=pdo_mysql.so should be enabled in /etc/php/php.ini
Restart httpd then your drupal install will be available at domain.tld/drupal.
Last edited by KingX (2012-06-25 22:11:07)

LAMP Installation = broken mpd

Similar Messages

Maybe you are looking for