LAN adapter failed the media test

Hello
I don`t have a Toshiba notebook but have problem. When I started my computer I saw this following
Novell Netware ready firmware v.1.00 (940810) (c) Copyright 1991-1994 Novell inc. All Rights Reserved Intel Ether Express (TM) Pro /100 LAN adapter.
LAN adapter failed the media test
Please check the cable and reboot the system.
Exiting the RPL Loader
Operating system not found
My hard disk is detected by the Bios but when i tried to install an operating system "WXP Pro" from a Bootable CD, the installation didn't start.
Here i described how the page looked like so can anyone help me!!!

Hi Adam,
Firstly, check that you BIOS is set to boot from the correct devices (normally FDD - HDD - CD-ROM - LAN). The error that you are getting indicates that the BIOS has tried to boot from the LAN which would normally mean that the HDD has no useable operating system installed or that the MBR is corrupt.
If you can boot from the Windows XP installation CD but cannot then install the system to your hard drive, then it is likely that your hard drive itself is faulty and will need to be replaced. Try to boot from the windows CD and start the recovery console so that you can check the hard drive for errors.
regards,

Similar Messages

Will not having any ink in the color cartage cause the printer to fail the alignment test.

Will not having any ink in the color cartage cause the printer to fail the alignment test.

Hi,
Yes. Usually the printer uses a combination of black and colour blocks to perform an aligment. The specific patterns differ from printer to printer but the pattern is either read by an internal sensor or you have to take the page and put it on the scanner to scan the alignment page in some all-in-one printers.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Video keeps failing the harding test - working with stock. Can you help??!

I have made a music promo, unfortuantely i have had it back from MTV twice now as it keeps failing the harding test (to test to see if it triggers epilietic siezures).
I am working with stock from the prelinger archives, which - to be honest - has been a nightmare to work with for various reasons.
The wierd thing is, the test has failed twice, both on different areas. I edited the video after it failed the first time, then it failed on a totally un-related area on the second test, which the first test didn't pick up.
I am getting "luminance flashes" between 0.5 and 2.2. Is there a way I can filter these out in the edit rather than get the video sent back again? The "luminance flshes" can not even be made out to the naked eye. I have changed the problem areas, then it picks up something else once I send it to MTV again.
Clearly something is happening when I export the video and get it transferred to Digibeta (same file, same edit - just changed slightly), OR - something is happening in Final Cut pro when I export to DV tape which is making this happen.
£60 a time for a digibeta transfer is becomming quite expensive. Especially if I get it sent back again!

I am getting "luminance flashes" between 0.5 and 2.2.
What is this value?
The "luminance flshes" can not even be made out to the naked eye. I have changed the problem areas, then it picks up something else once I send it to MTV again.
A flash that cannot be seen by YOUR eye takes place at the field level and you are probably watching your video on a progressive monitor that cannot display fields.
A test that indicates you fialed should provide a precise timecode reference for each episode. If not, or if the failures move, their test is suspect.
Is there a way I can filter these out in the edit rather than get the video sent back again?
Without seeing your video, field by field, there's no way to really know where to send you for help. You do not seem to have the technical ability or facility to perform the quality assurance required by MTV. Their engineers should be able to offer some technical assistance or refer you to a good post production house that can cure your problems once and for all. However, it is a simple matter to apply color and luma correction at your current dub house when they do your transfer. They should be doing that for you anyway.
bogiesan

Windows media plugin fails to play video, audio OK. Plugin 1.0.0.8 in FFox 18.0.2 under W7. Fails win media test.

Symptom: MS Office 7 "Help" video selection triggers Ffox 18.0.2 browser which attempts to open aspx video and plays the soundtrack but does not display the visual content.
Diagnosis: WM player plugin 1.0.0.8 enabled and up to date. Ffox support page for WM Player plugin Windows Media Test link causes message/prompt "Not found: litmus-data/raw-file/tip/firefox/plugins/mediaplayer.html" on a Mercurial page.
FAQs do not detail the problem or solution.
Any ideas?
Just tried pasting the aspx link into Chrome address bar and the video plays correctly. I presume this means that WMP and codecs are installed correctly and the FFox (MZ) plugin is not linking properly with MZ.

Behance Plugin for LR not Authorizing in LR 5.6

Is my warenty still valid? I have dv9825 that failed the battery test.

I have discovered my LT will not run without the AC plug in, i ran the battery test and it failed.
Is there still a warrenty on this LT? (Pavilion dv9825nr, {Private Information Removed})

Here are the specs for your HP Pavilion dv9825nr Entertainment Notebook Computer. Based on the specs, I would guess this model was released for sale in 2008. Most HP consumer grade computers only come with a one year warranty, so your computer is no longer warrantied. It also appears that HP discontinued support for this model in mid-2011.
You may wish to check this HP Notebook PC Battery Pack Replacement Program to see if your computer model and battery are affected.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HT1339 My ipod classic fails the sync test on Windows 7. help say go to summary tab and check for updates. I cannot find a summary tab

My ipod is failing the sync diagnostic on my Windows 7. The troubleshooting guide say go to the Summary Tab and "check for updates" I can't find a summary tab. I have no problem sync with windows vista.

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

My device is recognized by itunes but won't sync and failed the sync diagnostic test. I've restarted the computer, reset the ipod . . . nothing works. Any suggestions would be greatly appreciated

iTunes shows the iPod is connected but doesn't show it in the drop down menu under Devices, and the "sync" option is grayed out, so I can't sync the nano with iTunes. I ran the diagnostic tests and it shows the device is connected, but it failed the sync test - it said nothing was connected, even though it passed the connectivity test. We've had the iPod for a few months but this is the first time we've tried to do anything with it. It's fully charged but just won't sync. I turned it off, turned it on. I reset it. I restarted the computer. I'm not sure where to go from here.

A couple of things to check:
Are there any backups listed in iTunes/settings/devices? Since backing up is the first step of the sync process, iTunes might be stuck trying to read the content of the last backup in order to replace it with the new one.
Copy the whole backup folder to a safe place, delete the backup from the list afterwards and make sure that the folder has no content after that. The folder is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
If you do not see the AppData or Application Data folders, you may need to show hidden files
After that, make sure autosync is disabled in iTunes, connect your ipod, right click on it in the device list and choose "backup". If you can backup manually, transfer your purchases the same way, to copy apps and purchased media to your iTunes. If this worked, you should be able to sync again.
To speed up the sync process, copy your photos to your computer prior to the sync and delete them on your ipod before you start.
Message was edited by: Ingo2711

Oracle VM server Install - Media Test on bootable CD fails

I have made 3 cd's on 2 different machines and when I run them to install the VM Server on a machine with a clean hard drive (ok irrelevant) I get an error when I try to run the Media Test. I have verified the checksums on the original ZIP files I downloaded and even downloaded a second copy of the zip to check it - I still get the error. I verified the CD as a part of the Burn process. (Note: I did do this on a different machine than I used to boot/read/install VM Server from.
Before you continue to read below - I guess my primary question is how safe was it to ignore the failure of the media test?
I created the cd with NERO 9 using Nero Burning ROM and selecting CD-ROM (ISO) when I drag the ISO file to Nero I get a message:
"You have added a single image file to an empty compilation. To burn the content of this type of image to a disc, please use the 'Burn Compilation'
function from the main menu.
Would you like to close the current compilation and burn the image instead?"
When I say yes and take the option I get a disc that has the contents of the ISO broken into many files (as I would expect to make a bootable disk). When I say no and then subsequently Burn the disc (without adding any extra files) it creates a disc with one file (the original ISO) on the disc.
It seems like it is trying to verify the the checksum of the original iso file? Or am I missing something. I got frustrated and used the disc without running the media test and it seems to run fine and the VM Server that was installed on my hard drive boots up fine as far as I can see.
Please feel free to point me to a link that explains UNIX (I have used UNIX but have not installed a UNIX system since the early 1980's) boot disk setup - I feel that there is something I am not understanding.
On a similar note I have created the Oracle VM Manager disk with the same process as above to make it a bootable disk. The documentation says that I do not have a bootable version of the Manager disc. Should I have created a disc with the ISO file intact on it instead?
OK I just did some research and now I understand that ISO type files are an archive type (like zip or tar.gz??) that can have boot records on it. Hmm. OK after all of this long dissertation I understand the ISO now but why would NERO have me build a CDROM(ISO) that did not make the ISO bootable?

I have exactly the same problem with VM Server 2.2.0. I have downloaded the zip file a couple of times, burnt the cd using different computers and different cd-burning software, I have a pile of spoilt cd by my side, but the media check always fails.
The only difference is that, if I go on with the installation despite the media check failure, the software apparently is not properly installed. When I boot, I get the message "time went backwards", surrounded by a bunch of numbers, and then it all gets stuck.
It is the second time in a year that I try and fail to get started with Oracle VM. Maybe Oracle VM is only for experts. Well, I give up. I will go back to running Oracle on VMWare or Microsoft Virtual Server, which have always worked flawlessly for me.
Regards
Juan Algaba Colera

HP media center m8457c phenom quad core fails multicore cpu test

During Hardware Diagnostic test the CPU fails the multicore test... The error does not give any info, I believe it tests the speed of the cpu with 1 core and then muti-cores and compares the time. The computer does seems slow lately.. Are there any tests I can run to determine what the problem is??
Thanks
Frank

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Ghost IP on LAN adapter

Hi,
for
some
time,
a
ghost IP address is
established on the main LAN adapter (Windows 2008 R2 Server) .
The Server have only two LAN Adapter. The first is active and have a IP V4 address, the other one ist deactived (with no IP address). The first IP adress is 10.110.43.1 (Server) - the Ghost IP is a private IP in the rage of 169.254.*.*
This address is not added to the LAN IP addresses - this IP address is changing every Server Startup.
Look like this:
We
have
uninstalled
all
LAN
adapters. Cleanup all hiden LAN Adapter in the device Manager.
If no adapater is installed no Gohst IP is established.
But
as soon as
the
first
LAN
adapter
is
installed,
this Ghost
IP
exists right away
again.
This Ghost IP is a big problem for same services who use IP adress. Some of it found the server via the Ghost address and then it crashed.
What can we do? Please help us. Thanks!
Danke und liebe Grüße Oliver Richter

Thanks @ Philippe
but this is not a trivial thing!
Look at our actual settings:
What we have done:
- scan the hole server for maleware (McAfee Enterprise is permanently active), additional maleware scan with Malewarebyte scan and also with Kaspersky - no maleware, virus or other malicious programs found
- deinstall all LAN NICs (with Intel deinstall programm
- controlled the device manager if there are hidden nics (with devmgr_show_nonpresent_devices=1 and "enable hidden devices" in device Manager) -> there are no hidden NIC only the MS Default (ISATAP, IKEv2 a.s.o.)
- if all LAN NICS deinstalled, no Ghost IP exist (this
is
logical,
because no NIC
exists
to bind
an IP)
- Boot up server
- reinstall NICs drivers (tested with old driver version 15.6 and with newer V19.3 - always the same result)
- after that no adding IP addreses - only checkup with ipconfig - a IP: 169.254.x.x was automatically added to the LAN NIC
- Input the correct IP address to this NIC -> Looks like the screenshot above - the Ghost IP 169.254.x.x will stay plus the correct IP 10.110.43.1
When I check with netstat -r - no route showed with the Ghost IP:
C:\>netstat -r
===========================================================================
Schnittstellenliste
14...00 e0 81 d9 fe b2 ......Intel(R) 82574L Gigabit Network Connection #7
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter #2
11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
===========================================================================
IPv4-Routentabelle
===========================================================================
Aktive Routen:
     Netzwerkziel    Netzwerkmaske          Gateway    Schnittstelle Metrik
          0.0.0.0          0.0.0.0    10.110.43.254      10.110.43.1    266
      10.110.43.0    255.255.255.0   Auf Verbindung       10.110.43.1    266
      10.110.43.1 255.255.255.255   Auf Verbindung       10.110.43.1    266
    10.110.43.255 255.255.255.255   Auf Verbindung       10.110.43.1    266
        127.0.0.0        255.0.0.0   Auf Verbindung         127.0.0.1    306
        127.0.0.1 255.255.255.255   Auf Verbindung         127.0.0.1    306
127.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
        224.0.0.0        240.0.0.0   Auf Verbindung         127.0.0.1    306
        224.0.0.0        240.0.0.0   Auf Verbindung       10.110.43.1    266
255.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
255.255.255.255 255.255.255.255   Auf Verbindung       10.110.43.1    266
===========================================================================
Ständige Routen:
Netzwerkadresse          Netzmaske Gatewayadresse Metrik
          0.0.0.0          0.0.0.0    10.110.43.254 Standard
===========================================================================
IPv6-Routentabelle
===========================================================================
Aktive Routen:
If Metrik Netzwerkziel             Gateway
1    306 ::1/128                  Auf Verbindung
14    266 fe80::/64                Auf Verbindung
14    266 fe80::64b4:e292:95d1:7d44/128
                                    Auf Verbindung
1    306 ff00::/8                 Auf Verbindung
14    266 ff00::/8                 Auf Verbindung
===========================================================================
Ständige Routen:
Keine
After all I use the Nirsoft CPORT (IP port listener tool) and filter the IP in range 169.254.0.0-169.254.255.255
This are the processes that "use" the Ghost IP (no others):
But if we start new services this services also listening to this Ghost IP and then we have some Errors (like: no Connection, IP address 169.254. is not support, a.s.o.)
Where can  I find the setting for this Ghost IP - How can I clean up this Ghost IP ???
Thanx for help.
Danke und liebe Grüße Oliver Richter

FTP Adapter fails first time when bpel process is invoked from concurrent

Hi,
We noticed that the invoke of the FTP adapter fails the first time when the bpel process is invoked from a concurrent program. The second time the concurrent is ran, it completes fine. However, when invoked from the console, it compeltes fine the first time itlsef.
Any idea what could be worng. We are on SOA Suite 10.1.3.4
Thanks
-Prapoorna

What you are doing with FTP adapter? Are you writing a file ? Any error details in logs when it is failing on first invocation ?

Wirelees LAN adapter for samsung TV

How can i get my Airport to see my LAN adapter?

The TV is wirelessly connected right now, correct? Are you setting up your TV using a static IP?
I’d suggest leaving all the network settings at auto, so that it picks up everything from the router, unless there’s a particular reason that you need to set it up with a fixed IP.
Would you happen to know the IP address of your router?
If you don’t, you can find it by checking the router information under Router Settings in the Cisco Connect software.
If you post that information, I can tell you what information you would need to put in for the static IP.
Also, the TV would ask you for the wireless network password, which is again something you can get from Cisco Connect.

HOW TO RESOLVE(Test failed: The Network Adapter could not establish the connection)

Hii
I want to create new databse as sysdba in jdev.I followed the steps as given in
Oracle JDeveloper 11g Release 2 Tutorials - Designing and Building Database Tables
In step 7 create database user and database connection, I am not able to do that and getting the error
(Test failed: The Network Adapter could not establish the connection).
Please help me.

Hi,
Could you please provide all value you pass to the connection properties on the connection creation panel? First of all, you should choose "Generic JDBC" as the connection type in order to use BDB SQL JDBC driver.
Regards,
Cindy

G460 and Windows 7 problems (Failed updates, LAN Adapter sometimes fails, etc...)

Hello everbody! I am having problems with Windows 7, well, I Have a original Windows 7 64-bit Retail CD copy and reinstalled on my G460 (The Original Windows OEM version comes with a lot of unecessary software and others stuffs =/), I've formatted and reinstalled, everything gone fine.
At the first initialization I've noticed LAN adapter was recognized, ok, I've set up IP address and configured Windows Update, it's been found 77 updates (optional updates included), but by default, only 67 updates selected, I let default updates selected and chose to download and install, but after that, only 10 or 13 updates was correctly installed, the others just failed! After reboot, the failed updates appeared to be reinstalled, ok, I chose to reinstall, but at this time, only 20 or 25 updates were correctly installed from the total failed updates, I thought to myself that some updates depends from another to be installed, ok, after three reboots, I've got all updates installed, well, at least that's what the system says, but when I look up at the Update History, I see many updates marked as FAILED, others are marked as sucefully installed, but the marjority are marked as failed! I don't know why it occurs, I've tried to install Windows 7 Service Pack 1 and it simply fails too. =/
Another problem too is the LAN Adapter, sometimes when Windows starts, the adapter doesn't work and when I check the Hardware manager, there is a yellow icon on the adapter and it says that the hardware couldn't initialize.
Anyone with the same problems?

Duck,
I am testing now after a clean Windows installation, before I update, I set to off the windows firewall and also lower my router's firewall, I also deselected the LAN Driver Updated, let's see if the problem occurs...
Hum, about the SP1, like you said, the video card (In my case, Intel HD Graphics) I've tried to download from Intel's site (Driver version: 15.21.10.64.2291): http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&ProductLine=Laptop..., but when I try to install, it says that is not the correct driver for the video card, just at the Lenovo's site works correctly (Driver Version: 8.15.10.2104): http://consumersupport.lenovo.com/ot/en/driversdownloads/APR_Driver_List.aspx?CategoryID=880973&OS=W...
Anyone has experienced this problem?
Thanks!

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

LAN adapter failed the media test

Similar Messages

Maybe you are looking for