Lan Card Installation Problem

Hi All,
I have HCL LX INIFINITY POWERLITE 6010 G1 laptop which Marvel Yukon 88E8053 PCI-E Gigabit Ethernet Controller . I tried lot of time to install the driver of it on Sun Solaris but I am not able to install it. I have done add_drv -i and give device id and vendor id . Still gives error softwares is partially install but not able to connect hardware. This lan driver is installed on Windows and Linux . Can anybody help me to sort out my problem or some pkg to download .
Thanks in advance.

You said you went through CMOS and reset everything, but did you CLEAR the CMOS?  If not, do that.
If this still does help, then take all expansion cards out except video and see if it boots.
Also, try removing memory stick/s if you have more than one.

Similar Messages

  • Will multiple Lan cards cause problems using rmi?

    Will multiple Lan cards cause problems using rmi? If a host has two or more network cards (only one of which is Internet-enabled), how does RMI know which IP address to use? There seems to be a problem when such a client registers with an RMI service, and has a client-side callback method invoked by the server.

    You can tell RMI the address you want by defining java.rmi.server.hostname at the JVM which exports the remote object.

  • Usb lan card connecting problem

    how to connect usb lan card ax88772a in mac 10.7 .. i have downloaded and succesfully installed the latest drivers it is present in the network plugin but can't acces it network preferences  .

    Hi Harry,
    I don't have one, but other USB networking things that need drivers usually require...
    Do not have the device plugged in when Installing the Drivers, if you did you likely need to run their uninstaller & reboot before installing.
    Install
    Reboot
    Wait for Mac to be fully booted up
    Plug in device
    Open Sys Prefs>Network, hopefully you see New Port detected, older OSXes you need to go to Port Configurations first to see it.
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.

  • Satellite 1130-Z23 W-Lan Card installation

    Hi!
    I have a Mini PCI W-LAN Card fr my Satellite 1130-Z23, now i have 2 cables, one black and one white. I have to put them in the righ adapter on the Card.
    Which ist the right one for AUX and the right one for MAIN?

    I have also googled a bit and have seen the black going into the main- see the picture:
    http://nucleus.seindal.dk/media/1/20041027-pa260006.jpg
    Ok, in order to avoid confusion see how the antennas are placed BEHIND of the TFT screen:
    They start from the minipci place:
    http://atheros.goofle.de/minipcislot.jpg
    This is how the antenna cables look like when not installed on the TFT housing:
    http://www.matashardware.com/bhtyj86kjuykui%20copy.jpg
    And this, when they are installed: One to the left, and one to the right:
    http://webwalker.gfx-networks.de/ebayshop/images/825.jpg
    It really is unimportant which color goes where, but, just to be 100% sure, use mike30 's suggestion :)
    Regards
    electrochain

  • Network Card Installation problem

    Hi All,
    I have HCL LX INIFINITY POWERLITE 6010 G1 laptop which Marvel Yukon 88E8053 PCI-E Gigabit Ethernet Controller . I tried lot of time to install the driver of it on Sun Solaris but I am not able to install it. I have done add_drv -i and give device id and vendor id . Still gives error softwares is partially install but not able to connect hardware. This lan driver is installed on Windows and Linux . Can anybody help me to sort out my problem or some pkg to download .
    Thanks in advance.

    I don't think your network card is Solaris compatible. A good stable choice is 3C905 by 3Com and Intel eepro100.
    2) I have got a no name brand network card with
    Realtek RTL8029 chip. At the begining of the
    installation, the hardware detection software does
    detect the card and assign resources to it. Later on
    during the installation, the program ask me what IP
    address to assign to the system, so I enter an IP
    address. AS soon as, I click OK. I got a messange
    like the IP address can not be assigned to the network
    card. Does this mean my network card is not
    compatible?Chetan Bhargava
    ASA Computers inc.

  • MS-6590 & AGP 8x/4x card installation Problem

    I've got an MSI MS-6590 motherboard and am having problems installing AGP 8x/4x cards in it.  I've tried two different cards (one being an ATI 128mb AGP Radeon 9200, the other a GeForce FX 5200 256mb AGP card) and in both cases when I booted up my system after installing the card Window 98 identified both cards as  PCI cards and wanted to install a PCI driver.  I canceled out of this both times and tried to install the AGP driver in each case from the CD supplied with the card only to get an error message stating that the driver I was attempting to install didn't match the  card the system was seeing.  After this the installation was aborted.
    Both cards claimed to support Windows 98/98SE (the Radeon through the Windows ME driver).
    My system currently uses an ATI Radeon 7200 card with works just fine with my MS-6590.
    Do AGP 8x/4x cards require Windows XP inspite the card manufacturer claiming that Windows 98SE is supported or is there some kind of hardware conflict that is causing Windows 98 not to see the card as being AGP?  If the latter, how do I resolve the problem?
    Scott Miller

    Well, I downloaded the 455vp1 version of VIA Hyperion 4in1 driver and installed it without any problems.  It did, however, install a VIA Standard Host Bridge driver and a VIA Standard PCI to ISA Bridge driver.  Are these, particularly the latter, going to cause problems (so far they haven't) since the MS-6590 doesn't have any ISA slots?  Can I remove them (if necessary)? If so, how? I tried deleting the latter via the Control Panel/Device Manager but Windows 98SE insisted on reinstalling it when I restarted my system!
    I also found a "VIA AGP 4x/133 Setup Program" in my App Add/Remove list (I don't know if the previous 449 4in1 installer added it or it was installed by the 6590 CD driver installer).  Do I need to keep this or can it be safely uninstalled?
    Thanks for all the help!

  • AirPort Extreme card installation problem

    I recently bought an airport extreme card to put in my eMac (1.42 ghz G4). I follow the instructions to the letter for installation, but whenever I try to turn the computer on after installation, it sounds the 'turn-on' chord and then just sits there, black screen, power light on, never getting past that point. if i shut down and take the card out, it turns on just fine, everything works. I have all the latest software updates, installed the airport software that came with the card. what could possibly be wrong?

    Most folks that report problems with the installation
    of the AirPort Extreme cards find that they don't
    have the card fully in place. There should be a
    "click" when the card is firmly seated in the slot.
    Hi. I'm facing same problem. My eMac doesn't start. I pushed as hard as I can the AirPort in the slot. It seems fitting well. As soon as I remove the card it start like a dream. I'll try again after reading your comment, but I am nervous. What if I break the housing?

  • Netwrok card installation problem

    Hi.
    i have problem in installing my network card driver, Until now i was able use my network card fine, but after i re-install my OS (as i needed to increase the size of my harddisk.) i am not been able to install network card driver, the driver are in package form. this is "ADMtek AN983" network card.
    i have got three different network cards, but most of them dont have there drivers for solaris O/s, for few of who i manage to get their drivers from internet, say they are built for 32bit kernel.
    here is the output of the error i am getting during installation.
    earlier i was able to install the drivers fine, but this time there is a problem...!!
    can anyone please help me...!
    sunshine# cd var/tmp
    sunshine# ls
    brlog etherdrivers-1.0.8-i386.zip
    dstreAAA17aGvc gconfd-root
    dstreAAA7GaGza keyring-vWVPfa
    dstreAAADPaOvc mapping-root
    dstreAAAEra4za orbit-root
    dstreAAALwaaHa svdh7.tmp
    dstreAAAXoaquc wscon-:0-eFaOzb
    sunshine# unzip etherdrivers-1.0.8-i386.zip
    Archive: etherdrivers-1.0.8-i386.zip
    creating: etherdrivers-1.0.8/
    creating: etherdrivers-1.0.8/Packages/
    creating: etherdrivers-1.0.8/Packages/i386/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/pkginfo
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/pkgmap
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/checkinstall
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/copyright
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/depend
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/postinstall
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/install/postremove
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/afe
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/amd64/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/amd64/afe
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/amd64/mxfe
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetd/reloc/kernel/drv/mxfe
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/pkginfo
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/pkgmap
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/install/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/install/copyright
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/sman1m/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/sman1m/etherdiag.1m
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/sman7d/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/sman7d/afe.7d
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetm/reloc/GEDnet/man/sman7d/mxfe.7d
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/pkginfo
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/pkgmap
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/install/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/install/copyright
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/bin/
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/bin/etherdiag
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/include/
    creating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/include/sys/ inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/include/sys/afe.h
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/include/sys/mii.h
    inflating: etherdrivers-1.0.8/Packages/i386/GEDenetu/reloc/GEDnet/include/sys/mxfe.h
    inflating: etherdrivers-1.0.8/README
    inflating: etherdrivers-1.0.8/COPYING
    inflating: etherdrivers-1.0.8/GUIDE.html
    inflating: etherdrivers-1.0.8/GUIDE.pdf
    inflating: etherdrivers-1.0.8/GUIDE.ps
    sunshine# cd
    sunshine# pkgadd -d /var/tmp/etherdrivers-1.0.8/Packages/i386/all
    pkgadd: ERROR: attempt to process datastream failed
    - open of </var/tmp/etherdrivers-1.0.8/Packages/i386/all> failed, errno=2
    pkgadd: ERROR: could not process datastream from </var/tmp/etherdrivers-1.0.8/Packages/i386/all>
    sunshine#

    #pkgadd -d /var/tmp/etherdrivers-1.0.8/Packages/i386/
    OR
    #cd /var/tmp/etherdrivers-1.0.8/Packages
    #pkgadd -d i386/
    The following packages are available:
    1 GEDenetd Garrett's Solaris Ethernet Drivers
    (i386) 1.0.8,REV=2006.10.16.19.30
    2 GEDenetm Garrett's Solaris Ethernet Drivers (Man Pages)
    (i386) 1.0.8,REV=2006.10.16.19.30
    3 GEDenetu Garrett's Solaris Ethernet Drivers (Utility and Header)
    (i386) 1.0.8,REV=2006.10.16.19.30
    Select package(s) you wish to process (or 'all' to process
    all packages). (default: all) [?,??,q]: all <enter>
    That's it.
    Edited by: Kannan on Mar 31, 2009 12:27 PM

  • Airport Express Card Installation Problem

    I purchased an Airport Express card for my PowerMac G5 (Dual 1.8ghz)...after installing the card and rebooting the computer, I just got a black screen. I know the "late 2005 Models" particularly the October 2005 models are not able to use the Express card....but mine was purchased in Feb. 2005.
    I really need wireless capabilities and I'm stuck on what my options are. Apple customer service said my computer is "airport express ready" and should take the card....but no matter how many times I try to install, I get a black screen.
    Has anyone had a similar problem or have any solutions....I'm moving to a place where I will not be able to directly connect through a hard line (Ethernet)...Thank you in advance!
    Message was edited by: artfixation

    The AirPort Extreme card is compatible with your Power Mac G5.
    One or more of the following is true:
    The AirPort Extreme card is defective.
    The card is installed incorrectly.
    The Power Mac's motherboard is defective and failing to recognize the card.

  • Graphics card installation problem

    Hi All !
    The problem :
    I decided to upgrade my G5 1,8 DP with new NVIDIA GeForce 6800 GT DDL with 256MB GDDR3 SDRAM.
    Chosen this card after readin' this :
    http://support.apple.com/specs/powermac/PowerMac_G5_Late2004.html
    So, now I can't imagine how to install card because:
    There are some additional power supply connectors on 6800, lookin' same like on most of PC's power connectors ( for hard disks i suppose ),
    The problem is that I can't find such connectors in my G5 (((.
    Where did I wrong ? Help !
    God bless this forum !
    Peace.

    Hi,
    You'll need a Molex 4-pin splitter. Attach one end of this to the power from the CD/DVD power Molex and route the free end to the video card. In other words, you have to 'T' the Optical drive power supply.
    There is a tutorial at the site below, you'll have to log in to see it.
    http://strangedogs.proboards40.com/index.cgi?action=display&board=experiments&th read=1151384162&page=1
    Regards,
    Dave

  • AGP video card installation problem. Help!!!

    How in the WORLD am I going to get my AGP video card installed???  I can't get it close to the AGP slot before everything is in a bind.  The power cable bundle sticks out too far, and it looks like the optical drive hangs out over the AGP slot.  What did you folks do???  Please help soon.  If I can't get my AIW9700Pro installed, I might as well send it back to where I bought it.
    Glendor...

    To get mine in I cut the ties further down the board so that I could move stuff around easier.
    I was able to put 1/2 of the cables coming out of the psu over the card, the other 1/2 pressed flat against the PSU. That way it JUST fit.
    Very tight squeese but Fits ok when secured.
    Once the card is in the slot there is more room above the card to push the cables so it may work if you remove the PSU, fit the card then refit the PSU with the cables just above the AGP card.

  • Sound card installation problem.

    Hi, i have one HP 6530s. i was using XP and it was working good. Yesterday i install VISTA. after that i cant use my headphone. if i plugin the headphone sound don't come out from it. still sounds come out from the laptop speaker. i update driver software from device manager. its update successfully. but still not working my headphone.  plz tell me what should i do?

    Hi,
    Disconnect from Internet.
    Uninstall from Your system ADI SoundMAX audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    Restart Your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
    and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
    Restart Your system and this time start it in normally.
    Install correct audio driver:
    ADI SoundMAX audio here
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • PCI Card Slot - Wireless LAN Card Problems - Help!

    Help.
    I'm having problems getting my board to recognize both:
    Linksys WMP11 Wireless LAN card; and
    Netgear WG311T Wireless LAN card
    (returned the Linksys card, but the Netgear card had the same problem).
    Neither card is being picked up by Windows (XP Home), although both the "power" and "link" LED lights up when inserted.  I've tried every PCI slot, same issue.  Nothing shows up in the device manager, and no new hardware is detected.  The Netgear software tells me that the card has not been installed.  
    Am left thinking I need to RMA the board.  Any suggestions woudl be much appreciated.
    K8N Neo Platinum
    AMD 64 3200+
    512mb OCZ 3200EL
    Samsung 120mb SATA 7200rpm
    Pioneer 108D DVD
    Sapphire 9600xt

    My roommate has a similar setup as you and I am having the same problem getting a pci wifi card to work in the machine.  I have tried both a Linksys WMP54G and a Netgear WG311. Both cards will scan for networks bit will never connect my router (Linksys WRT54G). Just to get them to recognise the network, I have to turn off WEP, and turn on ESSID broadcast.  Both of these cards work prefect in other computers. I know it not a signal problem because I can take my laptop and set it in the same location and it gets excellent signal.
    I have tried changing slots in the machine, the wifi cards were the only PCI cards in the machine and an GeForce 6800 GT in the AGP slot. I have no idea what the problem could be. But I'm leaning towards the mobo at this point.

  • Sattelite A100 - LAN card problem PPPOE

    HI People,
    I have Toshiba Sattelite A100 PSAANE with Intel PRO/100 VE lan card. I thing that my card works fine but i am a little confused after a period of time "when i download from torrents or web" my PPPOE connection is restarted. Connection is restarting periodically, some times is stable one hour but some times restart every 30 second :( or minute or 5 ............... I need your help people please tell me my LAN is dead or ????
    P.S. When i download the same files "from torrents" on my PC with atheros LAN everything is ok. Please HELP
    Thanks

    Yes i use XP but SP2 I don't have SP3. XP SP3 will solve this problem or ??
    Thanks

  • Can I modify jumpstart server boot image to support another LAN card?

    I tried to install Solaris 9 from jumpstart server. However, Solaris 9 does not support my on-board LAN Card. As a result, I try to install Solaris 10 beta 55 from jumpstart server. It is a good news to me that Solaris 10 beta 55 does support "Intel 82801DB PRO/100 VE Ethernet". The installation is successfull. However, there is a problem when I install Windows XP on another DOS partition. I have no idea why the installation of MS Windows XP will crash the Solaris 10 beta 55 partition. Durning boot process in Solaris 10, There are a lot of Solaris partition errors. It is not a good idea to install Solaris 10 until the release comes out.
    I think that it should be possible to modify Solaris 9 jumpstart server so that I can use Solaris 10 beta cd to kick up LAN driver and call Solaris 9 jumpstart server to install the OS.

    You can use a "prestart command". It can be configured in the properties of each boot image, 'customization' tab.
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for