LAN connection not working/Ethernet controller driver missing

I got a new hard drive and installed a clean copy of windows 7 on it. After dealing with a few problems I finally had it up and running. I transferred via usb and installed drivers from http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-500-Desktop-PC-series/7779690/model/8154137#Z7_3054ICK0KGTE30AQO5O3KA30R1. Every thing is working except for my LAN connection. I can connect to wifi however. In device manager I have a ! next to ethernet controller. Had ! on a bunch more before installing other drivers. In network adapter settings there is no listed Local Area Connection. What do I need to get my Lan connection working again?

Hi: The support page for your model indicates you need this ethernet driver... This package provides the Realtek PCIe GBE Family Controller Driver for supported models running a supported operating system. File name: sp71102.exe You have to manually install this driver. Run the file and then go to the device manager. Click on the ethernet controller needing drivers. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder should be located in C:\SWSetup\sp71102. Make sure the Include Subfolders box is checked, and the driver should install.

Similar Messages

Ethernet controller Driver

Hi: DL and install the second driver on the list from the link below... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

I could not find ethernet controller driver for my laptop. Every time i try to dowload from device manager it says it could not find the driver. I also tried driectly from HP site. My laptop details. Model: HP Pavillion DV6 7011TXOS: Windows 7

Usb driver on the left side near the lan are not working

The brightness keys are also not working and the usb drives on the left near the lan are not working.

Hi:
Did you reinstall the operating system?
If so, you are probably missing the graphics and USB3 drivers.
Graphics:
File name: sp56458.exe
USB3: Download and install both of these drivers and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...
If there is a device labeled SMBus Controller in the device manager, this driver should work for that device.
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_119081_1

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

Dv6809wm nvidia Ethernet Controller driver help me please.

My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
After installing Windows 7, nvidia Ethernet Controller, driver can not find.
Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
What should I do? You help me please.

This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file.
You may also want to try one of these drivers:
http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
Use the ones labelled: 3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
Post back if you need more help with this.

T61 Intel Pro 1000 Lan Adpater not working

Hello, I have a T61 7664-17U. I recently had to replace the hard drive on this system due to drive read errors.
I have all of my system up to date and working, except the lan adapter. I have the 82566MM Gigabit connection in the network connections but there is no communication when i connect the rj45 cable. I would like to get this working as my office does not
have a wireless connection and i need to use the system there. Could anyone please guide me to the correct driver and how to install it so i get things finished up and working. Any suggestions would be appreciated.

check BIOS / configuration and see if INTERNAL LAN is enbaled or disabled. i had this happen when my wireless and lan were not working. fixed it in bios.
T7600, T60p - 2GB - 2.33GHZ - 100GB

Satellite A100 Ethernet Controller driver

I can't find the ethernet controller driver and the PCI device in the list. I tried LAN driver (Intel Pro 10) and (Intel Pro 100) but they have no setup file, only uninstall files. Any idea?
Message was edited by: footplant

Do you see INF files? You may need to manually install the driver.
Go into Device Manager and select the LAN device. Update its driver and point it to the folder where the INF file resides.

X-Fi Titanium PCI Express front pannel connection not working

<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM

Camera connection not working with my camera

Camera connect not working with my Sony boggie camera

The Bloggie will not work because it draws too much power from the USB port on the iPad. The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory. Works fine with my 3D Bloggie.

Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it.

T500 Ethernet Connection Not working, but wireless is working

Hi
In my laptop, when I try to connect to internet using the Ethernet card, it is not working.
My laptop has the following configuration.
T500; Windows Vista 64
Ethernet card: Intel(R) 82567LM Gigabit Network Connection
Following are what I observed.
1. From command prompt, when I executed the command ipconfig, it is not listing the ethernet adapter connection.
C:\Windows\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Palasseri-Mana
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : My WiFi PAN
   Physical Address. . . . . . . . . : 00-21-6A-1A-24-B3
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : WiFi STA
   Physical Address. . . . . . . . . : 00-21-6A-1A-24-B2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::42a:c2e2:cf9f:7b87%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, February 21, 2010 6:12:15 PM
   Lease Expires . . . . . . . . . . : Sunday, February 28, 2010 6:12:14 PM
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCP Server . . . . . . . . . . . : 192.168.0.1
   DHCPv6 IAID . . . . . . . . . . . : 234889578
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-88-93-46-00-24-7E-13-AE-17
   DNS Servers . . . . . . . . . . . : 192.168.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{7DB78E75-7547-408D-97D2-C347AF27F
5F9}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{5D3FE014-FD4D-40E1-AB3A-94B48F4A9
392}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
2. Control Panel\Network and Internet\Network Connections : Under this, when I list all the connection, the Ethernet connection is showing it as Enable.
3. When I unplug the network cable, at Control Panel\Network and Internet\Network Connections, I see the status as Cable Unplugged..
4. I downloaded the latest driver and installed, but didnt change this behavior.
How can I fix this ethernet issue. Any help is deeply appreciated.
Thanks,
NP

palasseri wrote:
Thank you for your reply.
Yeah, it is listed under the Device Manager.
I see one potential error under the event viewer. Thank you for that pointer.
The IP address lease 192.168.0.11 for the Network Card with network address 00216A1A24B2 has been denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).
Any idea why this is coming???
I get that exact same error when I change my MAC address and my computer is trying to connect to my router.
This message is probably just the result of your computer not recognizing your Ethernet Adapter.
I have never had this problem and am just shooting in the dark, but I would say you either have a bad Ethernet card, or your Adapter is not configured correctly.
I keep wanting to go back to your adapter in the Device Manager.
Is the Device Status "This Device is working Properly"?
Under Power Management, is the "Allow the computer to turn off this device to save power" unchecked?
Are you downloading the drivers from Lenovo's website?
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70199
Have your tried Uninstalling the adapter, and reboot.
Your system may automatically reinstall the adapter. If not, you can manually reinstall it.
T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

I bought Hp 15 g207ax, 2 out of 3 usb not working, and all drivers missing, no ethernet or no wifi

i bought a new Hp 15 G207AX.
issue 1 - 2 out of 3 usb not working, 1 usb 3.0 and 1 usb2.0 not working. 1 usb 2.0 is working properly
question 1- is it because of faulty laptop or driver issue? also, if it is driver issue, then why 1 usb 2.0 is working?
issue 2 - All Drivers are missing.
question 2 - where can i find all the drivers?
issue 3 - no ethernet and no wifi connecting
question 3 - is there a driver for ethernet too? can you tell me what drivers i need to install for ethernet or wifi. because without those, i cant do anything?
looking for your immediate reply. as if in 1st question, if usb ports are defective and laptop is faulty, i will ask for a replacement or refund.

Likely all of these issues would be fixed with the chipset driver.
Did you look at the solutions listed in that other forum post I linked to above?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Apple tv ethernet connection not working

Connected my new Apple TV to the ethernet cable and it doesn´t show the network available to connect to internet.
Am I missing some step ?
Thanks

ISSUE
After the latest software update, my Apple TV2 has stopped recognizing any form of network connectivity and appears to believe that it's connected to the network via an ethernet connection, whether or not there is one actually plugged into the back of the device.
BACKGROUND
I echo many of the previous posts... I've had Apple TV2 for over a year with no difficulties. Ethernet and wireless connections have always worked. For the last 6 months the Apple TV2 has been hardwired via my ethernet connection with stellar results. However, after the recent software upgrade, I've lost all network connectivity. Apple TV2 will no longer recognize the same ethernet connection it's always been attached to. This is the same connection that has always allowed me to watch iTune movies, Netflix and download/install all previous software updates. Worse yet, when the ethernet connection is unplugged from the back of the device, Apple TV2 believes it is still connected to the ethernet cord, as if it's stuck, and WiFi functionality does not kick in.
TROUBLESHOOTING
This specific issue has nothing to do with the actual "network" so I am kindly asking people to stop recommending that we check our network/router settings and ethernet cords. Apple TV2 is designed to automatically activate its wireless function when an ethernet connection is not recognized. It's should be pretty obvious to anyone who is tech savvy that there is something wrong with the device and not the network, with respect to the specific aforementioned symptoms.
STEPS
Nothing has changed on the network and I've tested the ethernet connection with both MacBook Pros... with success.
Restarted device multiple times
Attempted to restore device but no network connectivity makes this impossible
Connected device to iMac via micro USB cord and restored from scratch
Made the assumption the wireless antenna could not recognize network due to location, surroundings (i.e. tv stand, Directv receiver, SP3), etc. Moved Apple TV2 to another location and connected to different TV. Wireless functionality still does not activate when ethernet cable not plugged in.
All other common sense troubleshooting steps have been taken per Apple's troubleshooting recommendations and other blog site recommendations
I'm sure the latest software update worked for the majority of all Apple TV2 owners. Anything could have gone arwy during the update that could have caused this specific issue to present itself. Either way, there are enough folks with the same complaint to warrant a deeper dive of the issue. My next step will be to jailbreak the device since I have nothing to lose at this stage... it's a simple paperweight until I find a solution.

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Installing SSD Drive - SATA 3 connection not working

Trying to install a new Samsung EVO 850 SSD Drive. The motherboard is MSI MS-7778 (Jasmine). I can get it to work on the white, dark blue, and light blue SATA connections. The yellow SATA connection (I think labeled SATA 3) does not work. It does not work when I connect it to anything in the computer. I need all four connections. Two hard drives and the DVD reader are already using the white, dark blue, and light blue SATA connections.Does anyone know how to get the yellow SATA connection (SATA 3) to work?Thanks! It's been a long night....

Thanks for the suggestion. I too had noticed the motherboard diagram. I tried and tried all three SATA connections over and over again with no progress. I tried everything I could think of. Changed wires, checked the BIOS, etc.I was just ready to give up when my wife received a call from the Microsoft store notifying her that the install of Windows 10 on her laptop was done. She put the computer tech on the phone, I described the problem and he suggested that I try what I had been contemplating - reinstalling Windows 10 all over again. So I plugged in the SSD drive, both regular hard drives and said to myself, "After this many hours, I've got nothing to lose!" Reinstalled Windows 10 from my USB flash drive and everything worked like a charm. I couldn't believe it!It appears Windows 10 reads your entire hardware configuration on the initial install through the Internet. Which takes forever!Windows 10 doesn't like changes. So those of us who like to upgrade our computers with new SSD drives, memory, etc. are going to have to re-learn how to do it. It used to be so easy! Learning Windows 10 and how it reacts to new hardware configurations certainly sucked up many hours of my time!Thanks for the on-point advice.

LAN connection not working/Ethernet controller driver missing

Similar Messages

Maybe you are looking for