LAN is created only by dlink normal switch

HI all professionals.
In my company all the network is created by cascading the normal 12 or 24 ports switches.For around 150 computers, is it the right way to create a network. Or we need to change something in this for make it better.

Munish,
Ideally no - this is not a good way of doing it, as you are creating 1 very large broadcast domain, which can be counter-productive.
I would suggest you consider actuallu purchasing "Switches" and consider a 3 layer model:-
Access (users connect to this)
|
Distribution (the access layer switches are aggregated here - & possibly some dynamic routing)
|
Core (where everything comes to, perhaps you just have layer 3 interfaces here)
I suggest you read the below design guides to get an idea of what you can do!
http://www.cisco.com/en/US/netsol/ns742/networking_solutions_program_category_home.html
HTH>

Similar Messages

Creating multiple vlans across multiple switches

Hi All,
How should I create multiple vlans across multiple switches?
For instance, I have two (primary/redudant) layer 3 (core) switches and four layer 2 access switches (Cisco 2960) for the hosts, and given these are the vlans/subnets to be created. Should I do it in the core switches only and it would just propagate through the access via VTP? Just trying to practice and learn.. Any help will be greatly appreciated:)
VLAN 100: [DHCP-workstations]
172.26.4.0/24
172.26.5.0/24
VLAN 200: [Servers]
172.16.1.0/24
172.16.2.0/24
VLAN 300: [Printers]
192.168.129.0/24
192.168.130.0/24
VLAN 800: [Management for switches/routers]
10.160.1.0/24

Hi
You will have the SVI on the core. Set a VTP domain, make one of the cores as VTP server and rest of the switches as VTP clients. Once you do this, you won't have to login into each switch and create a vlan locally. The vlans will be automatically advertised from the VTP server to all the VTP clients.
Thanks
Ankur
"Please rate the post if found useful"

Inspection lot should be created only for particular vendor

Hi
Can anyone please help in achieving the below scenario:
*Material has been assigned to the inspection type A (one time inspection) has been set as preffered and active in the inspection set up in the material master.
*Quality level has been created for material and vendor such that inspection should be carried out when next stage is 1 and no inspection should carried out when next stage is 2.
*Tasklist has been assigned with material and vendor .
Material can be supplied by different vendors,For this material, inspection should be done only for one vendor and for other vendors there should not be any inspection to be done and no inspection lot should be created.i.e Inspection lot should be created only for one vendor say AA whereas now inspection lot is getting created when goods receipt is done for the purchase order with other vendor BB.
My requirement is the inspection lot should not be created when goods receipt is done with other vendors say BB except AA.
Is there any other way other than using quality info record to achieve this.
I can try with DMR but the thing is there should not be inspection lot created while posting GR.
can anyone suggest me any other way to achieve this requirement.

There are user exits when you create an inspection lot. One of those could be used to suppress the inspection lot. Have you looked at these? Have you researched any QM user exits yourself yet? This isn't the first time this specific question has been asked over the years.
It's not hard and there are lists of QM user exits available all over the internet.
Please do some research.
You can also assign vendors to inspection plans with a DMR that requires one inspection, and than after that creates all skip lot inspections which you automatically close by a batch job. The first lot can be manually forced closed. Thereaftter all receipts would be skipped. Not 100% but pretty darn close. This requires that you know which vendors to assign to which plan. Probably as much data maintenance as maintaing the Q-info records.
And yes.. your client needs to come up with better reasons than "I don't wanna..". It's part of a consultants job to convince them.
Craig

Delivery cannot be created (only 0 qty of material available )

Hello All,
I have created a sales order for material A on plant B for one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is 28.12.10.
But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
The schedule line catergory is CN(not relevant for MRP) in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
Pls help.
regds
Pamela

Hi Pamela,
It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
I hope this helps
Br,
Tushar

How to change read only folders into normal ones...i can't get any filed from my harddrive

how to change read only folders into normal ones...i can't get any filed from my hard drive..it shows read only

Which HDD are you referring to, an external one, or the internal SSD?
If external, which format is it in?

What is the purpose of the Serial / Normal switch on the SUP-NS3S lens support.

What is the purpose of the Serial / Normal switch on the SUP-NS3S lens support.

Hello Dkaer,
The SUP-NS3S lens support is a very specific product and handled a bit differently than our consumer [and even professional] level equipment. Meaning, we will need to consult with our broadcast lens engineers to provide a complete answer. Once they respond back to us, the response will be posted either back to this forum thread, or relayed via email directly to you.
Thank you for your patience on this matter. We hope you have a great day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Instead of creating multiple Instances I want to create only one Instance.

Hi Everyone
Good morning, How are you.
I have a requirement to transfer files from one location to another location, I am able to do this successfully using FTP Adapters.
I have some Issues please help any one.
1) When I deployed my process it is creating one instance for one file transfer, Suppose If I have 50 files in my Get
directory, After deploy the process 50 instances are creating and 50 Email generating saying files are not tranfered successfully.
Instead of creating 50 Instances I want to create only one Instance.
2) When files are not transferd it will fire error mail saying that not success (I want to display all file names(not tranfered files) in my mail , i.e whatever files are not tranfered, need to diplay in mail).
3) And I am not able to transfer 0 size files, But in BPEL Console Instance is creating for 0 size file also and I am getting Email for success... and In put directory 0 size file is not showing. (Instance is creating and Success Email coming but file is not exists in Put directory)
Please help me.
Regards
Venkat
Edited by: user10263255 on Oct 1, 2008 8:10 AM
Edited by: user10263255 on Oct 1, 2008 9:15 AM

Hi Dharmendra,
Thanks for your reply.
I am not able to see any thing about singleton process in mentioned URL.
Can you please provide me the another URL or please paste here about singleton process .
Thanks in Advance.
Regards
Venkat

Create Document Set with custom Create Only permission set

Here is the situation. We have a requirement where my customer wants to create document sets, however, document set/document level permissions are required.
Setup: We created a new permission level called "Create Only". We then give the user Read and Create only permissions. This allows the user to theoretically create the item. We then run a Workflow on create that Replaces the permissions so that
you are only allowed to view the ones you created along with other security groups based on their choices in the metadata fields.
This setup works PERFECTLY when using a List or Form Library.
However, for the life of me I cannot get it to work for Document Sets. If I have the same setup, I get an Access Denied message. However, it still creates the document set.
What is weird, I've been playing around with custom permission levels and it seems as though the user has to have EDIT permissions at a minimum in order to create the document set. This will not work for me since I dynamically assign permissions to each
document set based on what they select.
As a side note, the only tool I have at my disposal is SharePoint Designer 2010.
Does anyone know if there is an actual requirement to have EDIT permissions when creating a Document Set? Any input would be greatly appreciated.
Alternatively, is there a way to setup permissions on a library for all NT Authenticated users so that we can give them the necessary permissions to create the Document Set, but still prevent them from see the other items and then the Workflow would set
the permissions accordingly?
I believe the more granular the permissions it uses those permissions instead so would this work? I have not tested this theory yet.

Hi,
According to your description, my understanding is that you want to know if there is an actual requirement to have EDIT permissions when creating a Document Set and is there a way to setup permissions on a library for all NT Authenticated users and prevent
them from seeing items created by others.
For the first question, per my knowledge, if a user is given the Add Items permission, he/she can create a document set in SharePoint.
However, there is an error “access denied” after the document set is created. It is due to the user has no permission to access the page which SharePoint will redirect the user to after finishing creating the document set.
If the user is also given Edit Items permission, there will be no error when he/she create a document set.
For the second question, I recommend to follow the link below to
customize item permissions for each document submitted to a document library and remember to give the
NT Authenticated users contribute permission.
http://blogs.technet.com/b/spke/archive/2010/04/09/configure-item-level-permissions-for-document-libraries-sharepoint-2010-edition.aspx
To grant permission to NT Authenticated users, please refer to the link below:
http://office.microsoft.com/en-in/sharepoint-server-help/what-happened-to-add-all-authenticated-users-HA101805183.aspx
Best regards.
Thanks
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I read text files from LAN if I only know the hostname?

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
<p>1. How can I read text files from LAN if I only know the hostname, or IP address?
<p>2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.
(ex. how can I read the 120th line?)
<p>Please help!
<p>sorry for the bad english

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
1. How can I read text files from LAN if I only know the hostname, or IP address?You need to know the URL of the file. You need to know the hostname, port, protocl and relative path.
The hostname is server, not file.
2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.Use the seek() to get to a random byte.
(ex. how can I read the 120th line?)The only way to find the 120th line is to read the first 120 lines. You can use other file formats to find the 120th line without reading the whole file but to need to be able to detremine where the 120th line is

Delivery shouold not create only with Materail A

Hi All,
My requiment is:
I have created one Sales Order with Four Materails (A,B,C,D).
Now I want to create delivery - here the delivery should not be created only with Materail A. that means to create a delivery i have to enter materail B or C or D with A (with single materail A delivery should not create)
The materail is not a BOM item or solution is not related to Delivery group.
Can any one kindly suggest me how can i made setting such that i cannot create Delivery only with Materail A.
<< Moderator message - Please do not offer points >>
Best Regars
Amjathpasha
Edited by: Rob Burbank on Nov 25, 2010 3:49 PM

hi amjad,
this is to inform you that you cannot achieve this in standard configuration.
but with technical person you can achieve the same.
I have created one Sales Order with Four Materails (A,B,C,D) - ok
Now I want to create delivery - here the delivery should not be created only with Materail A - ok.
that means to create a delivery i have to enter materail B or C or D with A (with single materail A delivery should not create) - ok
this is copy control routine from sales document to delivery document.
logic for the same is:
read VBAP-POSNR 10,20,30 & 40 & VBAP-MATNR that is MATERIAL A,B,C,& D.
check if when ever VBAP-POSNR 10 - material -A is coming into the delivery whether the associated VBAP - POSNR's (any one). is there or not.
if it is there with any one of the POSNR's then process it other wise "E" message with "No Associated Materials Exist for Material A"
note : for this process please copy and create a new sales order to delivery to billing documents.
hope this helps.
please check with your abaper and update the forum.
regards,
balajia

System should create only one delivery for 100 different PO's in STO

Hi All
i need help
Plant B raising 100 different po's daily for different materials to Plant A.(STO)
Now Plant A will do Dilivery via VL10B.
Here my requirement is system should create only one delivery for 100 different PO's and delivery should contain all the
materials as line items bcause system should not create 100 deliveries( time consuming process).
Here there is no manual transaction for VL10B.
That is system is goining to excecute the VL10B automatically, there is no manual transation for VL10B
How can we do this?
Thanks
MSK

Hi
We can able to do your requirement
1. All the STO materials should have same sales view in materials for the *Unique)following field: Loading group, shipping Point, so on..
2. In the config, hope we have do the combine delivery setting for VL10B
Regards
Prasanna
Edited by: Prasanna Raju on Feb 17, 2010 1:52 PM

Firefox 3.6 is using a conditional stylesheet that I created only for IE6. Is there any script available to fix this? Thanks

I am creating a website and I create stylesheets for the look and feel of the website. Because of conflicting browser engines I have to create a separate stylesheet for versions of Internet Explorer.
I have noticed that FF 3.6 is using the conditional stylesheet I created only for IE6. Please help, this is not happening in later versions of FF or any other browsers.
Thanks

There are solutions for those interface issues, but to address your question about keeping the old version, make sure your auto-update is set to ask you before updating you.
Tools > Options > Advanced > Update mini-tab
http://support.mozilla.com/en-US/kb/Updating%20Firefox#w_configuring-update-options

Unable to create native thread in Normal Condition

I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
* ThreadJvmMemory.java
* Created on June 1, 2007, 9:49 AM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Administrator
public class ThreadJvmMemory extends Thread{
/** Creates a new instance of ThreadJvmMemory */
BufferedReader in = null;
public ThreadJvmMemory() {
public static void main(String args[]){
ThreadJvmMemory dummy = new ThreadJvmMemory();
dummy.waitTillEnter();
for(int i=0;i<5000;i++){
if(i%1000==0){
System.out.println(i);
dummy.waitTillEnter();
ThreadJvmMemory dummy1 = new ThreadJvmMemory();
dummy1.start();
public void run(){
//System.out.println("Here");
Object dummyObject = new Object();
try {
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
System.out.println("Came out of the thread");
public void waitTillEnter(){
try {
if(in==null)
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
I started the program using the following command line option..
"c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
2. Is there any way to configure process space. IMO No ?? Confirm ??
3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
Java version is 1.5.0
OS Windows 2k3
Snippet of GC Output
[GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
[GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
[GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
[GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
[GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
[GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
[GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs]

I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
* ThreadJvmMemory.java
* Created on June 1, 2007, 9:49 AM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Administrator
public class ThreadJvmMemory extends Thread{
/** Creates a new instance of ThreadJvmMemory */
BufferedReader in = null;
public ThreadJvmMemory() {
public static void main(String args[]){
ThreadJvmMemory dummy = new ThreadJvmMemory();
dummy.waitTillEnter();
for(int i=0;i<5000;i++){
if(i%1000==0){
System.out.println(i);
dummy.waitTillEnter();
ThreadJvmMemory dummy1 = new ThreadJvmMemory();
dummy1.start();
public void run(){
//System.out.println("Here");
Object dummyObject = new Object();
try {
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
System.out.println("Came out of the thread");
public void waitTillEnter(){
try {
if(in==null)
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
I started the program using the following command line option..
"c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
2. Is there any way to configure process space. IMO No ?? Confirm ??
3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
Java version is 1.5.0
OS Windows 2k3
Snippet of GC Output
[GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
[GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
[GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
[GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
[GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
[GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
[GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs]

IPTC Date Created only imports for October

I'm creating JPEGS with only IPTC and EXIF data in and the field 2:55 Date Created only seems to appear in the File Info / Origin / Date Created in CS4 if the date is set to october??
Manually editing the jpeg file, for example 20081007 works but 20080907 fails, even if I change the remaining EXIF and IPTC date fields to match
I dont suppose anyone has any ideas as this is driving me nuts!
Thanks
Derek

No, that changes the Date on the EXIF panel, in my case the date the scans were made. I want that date to stand and the IPTC Date Created date changed.
Probably doesn't matter anyway, since I have just discovered that changes I make in Aperture IPTC metadata cannot be written to the master copy. At least not for TIFF files. Strangely, it does seem to work for jpgs.
Too bad. I liked some Aperture features.

Creating Vlans at Core layer switches ?

Is there a need to create vlans at core layer switches ? If yes what are the pros and cons for this practice ?
Actually i have seen some networks doing that!

Well this is the topology that i'm working on.
we have implemented the 3 layer approach.
1. At access layer: Switches are all L2 (for sure :) )
2. At distribution layer: All switches are L3 are routes for incoming data.
3. At core we have 2 6500 switches. One is configured as L3 and all vlans are created in it. Second is just as regular L2 device.
and ofcourse there are some switch blocks for server farms and the likes.
My issue is
1. why don't we create vlans at distribution layer switches.
2. Why one core switch is acting as L2 and other is acting as L3. What will happen in case of failure to the one acting as L3.
Ps: the second issue just came up in my mind.

LAN is created only by dlink normal switch

Similar Messages

Maybe you are looking for