LAN not working since installing Windows XP on Satellite P100-160

Hi,
I purchased a P100-160 (PSPAAE - 01D00UEN) with Vista pre-installed. Couldn't stand Vista so I have just installed Windows XP.
However, I cannot get my LAN to work properly. That is, I can get it to work with the 'Cardbus Ethernet Card' plugged in, but i cannot get it to work via the RJ-45 slot!
Does anyone have any idea what I can do/how I can rectify this.
Many thanks
Yvonne

Hi
Thanks for your reply.
As far as I am aware I have downloaded all the drivers. I have checked both of the sites that you indicated, I have downloaded the drivers but there does not seem to be a 'setup' icon/file within the extrated files. There are 'unistaller' files but not a setup one - anyone have any ideas????
Do you suggest that I install all the drivers from scatch and see what happens? Any other suggetions would be very much appreciated.
Best regards
Yvonne
Message was edited by: yhart

Similar Messages

Built-in Mic not working since installing windows 7 64bit

Since windows 7 64bit installed in my lap A505-s6965, built-in microphone is not working, in control panel only have High definition audio device (twice and only one of them works fine).
only when i conect and external mic works perfect, cant find any specific driver is ther one?
Solved!
Go to Solution.

Satellite A505-S6965 (PSAP3U-01G00C)
Try both of these drivers. They are not the same!
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,928,112 bytes - Posted 09/04/09)
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,926,808 bytes - Posted 08/03/09)
Sometimes this helps.
   Toshiba Software Installer for Windows 7
-Jerry

Webcam not working after installing Windows 7

Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}

arby96 wrote:
Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}
Which version of Windows 7 is installed? (32 or 64-bit)
I see there is a BIOS update available only in Vista. You may wish to consider cloning your hard disk to an external storage device. Macrium Reflect Free is ideal for this. Recover your OS to the Vista OS and apply the BIOS update. Use Macrium Reflect and the clone image file that you created to return your notebook to Windows 7. Once you have done that, try the webcam updates available at the HP web support portal for your TouchSmart notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ITunes not working since installing 11.3(54) on a Macbook Pro.

Since installing iTunes 11.3 (54) on my Macbook Pro iTunes will now work. No music, radio, movies, etc. Nothing plays. Has anyone had a similar issue and found a fix? I downloaded iTunes and installed again but it did not resolve the issue.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Print spooler not working since installing LinkSys WRT 160N

Since installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
Even if I try reinstalling my drivers, I get the following error:
Spooler SubSystem App has encountered a problem and needs to close.
Prior to this error my firewall was giving me constant warnings about Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
I am using the online armor firewall on a Windows XP system.
I cannot access the LinkSys Advisor anymore as it will not start.
Thanks

I had the exact same thing happen to me. Installed a WRT 160N on May 10 and have not been able to print since. Wasn't sure it was the router until I dug into the event log. This message appears as a warning during the time I was installing:
Printer Driver Microsoft XPS Document Writer for Windows NT x86 Version-3 was added or updated. Files:- mxdwdrv.dll, unidrvui.dll, mxdwdui.gpd, unidrv.hlp, mxdwdui.dll, mxdwdui.ini, stddtype.gdl, stdnames.gpd, stdschem.gdl, stdschmx.gdl, unidrv.dll, unires.dll, XpsSvcs.dll.
Apparently we tried to print something a couple of days later and this error appears:
DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service lxcf_device with arguments "" in order to run the server:
{323CE21C-A448-40AA-BA74-7FCF1E44106F}
Any help out there? Windows says I have a spooler dll file missing and also keep getting an error message about "RPC server not available." What should I do?
thanks!

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

Illustrator CS4 not working since installing Yosemite

Since installing Yosemite on my Macbook Pro, my CS4 Adobe Illustrator no longer works. The related files in the applications folder also show as being unavailable. All of the other programmes in the CS4 design suite still run without a problem. Can you please let me know how I can fix this issue. Thanks.

sorry I've not seen this question sooner - I'm here looking of answers to a recent problem with Photoshop CS4 repeatedly crashing in Yosemite - been working fine for months until this week - roll on Serif Affinity Photo!...
However. I'm no illustrator expert but I have Ai CS4 on three Macs, all running Yosemite and Ai apparently working just fine as far as I can see (I'm not a frequent user of Ai so rarely touch the surface of features but it launches, opens Ai files supplied by clients and saves my edit just fine.
HTH
Steev

Help please! Keyboard not working after installing windows XP sp3 on T61

I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard customizer utility from some online information, however, it's not helping. I searched the lenovo support website, but there are lots of drivers there,I don't know which to pick. Does anyone had met the similar issue or know how to solve it? Thanks a million!

I have exactly the same problem. It is not related to docking for me - just regular standby/resume. A reboot solves the problem. Not exactly what you'd expect from a high-end business model. This is the first time in my over 22 years history of using computers that the keyboard fails randomly. Fix this IMIDIATELY Lenovo!
Message Edited by Chigu on 06-13-2009 12:39 PM

Scanner not working after installing Windows 7

Just installed Windows 7 and lost the ability to use the scanner function in Adobe. My scanner still works with my HP C6380 softwar
e. Was wondering if another driver was available for Windows 7. Yes or no, send if possible
I am usin Acrobat 9.0
I have already done the following.
1)    a. Launch Acrobat
       b. Click menu File->Create PDF->From Scanner->Custom Scan...
       c. In Custom Scan dialog, select the driver installed.
       d. Click Options button in Input section.
       e. Set Data Transfer Method as Native Mode.
       f. Initiate Scan process. Or, remove any compression settings in scanner's user's interface while scanning (Set compression to None).
2) Login with new user Account
3) Deleted Preferences folder.
4) Download the update for 9.1.
5) Repair Acrobat installation.
6) Scan the image into another application as a TIFFfile, and then convert the TIFF file to a PDF file.

Does your scanner work without using Acrobat? If not, you should go to HP's web site and see if there is a Windows 7 driver for your scanner you can download and install.
You should also update Acrobat to 9.3.

USBs not working after installing Windows 7. Please assist.

HP - Beats Special Edition
Model: 15-p030nr SKU: 7018105
Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS.
I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...
I notice there is not any CHIPSET driver folder.
Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found.
Please advise.
This question was solved.
View Solution.

Hi:
See if downloading and installing the amd chipset drivers works for you. Reboot after install.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

My Norton Identity Safe does not work since installing FF4.0.1

After installing FF4.0.1 my Norton Identity Safe does not work. Also, I have been getting a few pop-up windows which my Norton would normally have blocked. Norton is not showing any issues. FF is set to block Pop ups.

Symantec have made an update for their add-ons to work in Firefox 4, but they only listed them as compatible with Firefox 4.0, they need to update them to let them work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

IPod not syncing since installing Windows 8.1

I've just installed Windows 8.1 (jumping up from Windows 7) on my PC. Installed iTunes, then plugged in my iPod. Sync never even started up, though iTunes did open when I plugged in the iPod. I checked under Devices and Printers and I see that there seem to be two instances of an iPod there - one under Devices, and one under Unspecified. When I unplug my iPod from the PC, the first instance disappears but the instance under Unspecified remains (it's called Apple Mobile Device USB Driver). The first instance, under Devices, calls itself "Apple iPod USB Device" and it returns when I plug the iPod back in, so that's the instance that seems to be associated with the actual iPod.
Apple iPod USB Device has a yellow exclamation point next to it, and when I check under Properties for it and and then check for Properties under the Hardware tab I see a "Windows is uninstalling this device (code 21) message. This message never goes away, and Windows never actually uninstalls it. I can choose uninstall, and have done so, but when I plug in my iPod again, all this simply comes back.
At one point earlier today, iTunes began to "sync," but what it was syncing to I have no idea, because the iPod remained exactly as it has been - no new songs, no message in its little window saying it was syncing or anything. The "sync" lasted quite a while, and then when it finally finished, absolutely nothing had changed in the iPod.
So, even though plugging in the iPod starts up iTunes, they're just not seeing/talking to each other.
I've run the iTunes diagnostic, and it says it finds the iPod, but it also says (with a green light next to it) no usb ports found and (with a green light next to it) no firewire (IEEE 1394) ports found. It says All Tests Passed.

I had the same symptoms and similar recreation steps.
Updating the Apple Mobile USB device driver spelled out in step #2 http://helpios7.com/trust-this-computer-pop-up-fix/ fixed the problem for me.

Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

touch screen keybord is comming but touch screen is not working no responses...plz help me

Hi @jewaxen
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your touchscreen is not responding.
Was there any changes made before this issue occurred?
Have you checked for viruses or malware? Microsoft Malicious Software Removal Tool
Have you ran the HP Support Assistant to aid with HP updates and resolving issues?
Have you tried using Using automated troubleshooting (Windows 8)
Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
If after completing the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Keyboard and Mousepad does not work after installing windows support software.

I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard stopped working again.
Computer: iMac 21.5 in. late 2012
Used Windows 8.1 Pro 64bit
The keyboard and mousepad that I have is bluetooth.

Hi,
Have you checked it from Sounds yet. Please
Right click the speaker icon
Select Recording devices
You should see a "tick", otherwise Right click it and enable it.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

LAN not working since installing Windows XP on Satellite P100-160

Similar Messages

Maybe you are looking for