LAN on SysTray has a Yellow Exclamation Mark
So I read through most of the articles on this forum about this topic with no luck...tried installing latest drivers, registry settings, oh and my favorite reboot (really), but seriously this is an issue dating backing to Vista with no "REAL"
solution..Microsoft get off your butts and fix the issue...even though I have connectivity it says no Internet Access...which is false, because I do. The problem is it affects our internal SharePoint sites...all the computers with out the issue work fine and
all the ones that do fail...so I am looking for a solution to eliminating the random exclamation mark once and for all...we use the same image on thousands of machine and the issue is random...any thoughts or want to share in the frustration??
Chris
Hi,
More information about Yellow Exclamation Mark can be found in this link below:
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
And the second link explains how system determines the network locaion, if the network profile is incorrectly identified to a public profile, then it might cause problems to access the internal sites such as SharePoint sites.
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Meanhwile, if you have multiple network adapters\profiles in the system, then I suggest remove unused one if possible, test this issue again.
Temporarily turn off firewall and anti-vius software, test this issue.
Yolanda Zhu
TechNet Community Support
Similar Messages
-
The Driver "Intel(R) HM76 Express Chipset LPC Controller - 1E59" has a yellow exclamation in Divice Manager. How do I remove it? I just completed clean install of Windows 8 and this driver seems to be for windows 7.
Solved!
Go to Solution.Hello Filipe.
Did you perform the clean installation of the Windows 8 Operating System in your computer? If yes, perform a complete system recovery using the recovery discs to restore your computer to the factory setting in order to troubleshoot the issue.
Follow all the steps mentioned here to perform the system recovery using the recovery discs: http://esupport.sony.com/docs/pc/SVE14A2_series/EN/contents/04/18/14/14.html#l1_recovering from reco...
Note: It is required to take backup of all the data before performing the system recovery, as it erases everything from the computer.
Note: If my post answers your question, please mark it as an "Accepted Solution." -
Wireless network adapter - yellow exclamation mark triangle
Hello, My wireless internet button is orange and isn't and doesn't change colour when I press it so wifi isn't working. In network adapters, my wireless adapter shows up and is: Ralink RT5390R 802.11bgn Wi-Fi Adapter It has a yellow exclamation mark triangle on it. It says it is enabled, but in device status it says: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (code 39){Unable to load device driver}%hs device driver could not be loaded.Error status was 0x%x When I try to update driver software, it says the best driver software is already installed and up to date. Please help me get my wifi back - I have a HP pavilion g6 2210sa, Product number C6S45EA#ABU and running Windows 8. Best wishes and thank you in advance.
I have HP 15-r264dx windows 8.1 64 bit laptop with Realtek wireless adapter RTL8188ee 802.11 bgn. There is an exclamation mark with the wireless signal which is white. Sometimes my wireless cannot connect. My wired LAN is OK. I unchecked the option to make adapters power off to save power I think in power management. I have a 2015 driver for the wireless adapter. HP diagnosis would reset the adapter and everything is fine but still the white exclamation mark. I think a setting is not correct, any ideas what it may be and how do I go to it? I am connected with the wireless lan right now to my Verizon DSL router and it is unsecured.
-
IMovie Yellow Exclamation Mark - What's missing?
I have movies that I updated from iMovie 09. When loading the Project, in the Timeline, I see the title in the middle with a yellow exclamation mark. I'm not sure why this is there. I initially had music missing with red and some files missing for some Projects, but I fixed everything. It still shows the yellow exclamation mark. When I hover over it, nothing happens. I have an image of what it looks like. What am I missing from the Project?
Hi,
@Edwin
thanks for pointing me in the right direction Edwin. The problem was that I changed the name of the method after the def-file for the method has been created the first time. JDEV did not update the contents of this file (and/or the DataBindings.cpx). So the method name was wrong and I got errors running my test app.
I removed the task flow completely and set up a new one which is working as expected.
@Juan
for me it looked like I couldn't call the method defined as default action. I got errors (which I didn't read carefully) stating the the method was missing (something like ...#[bindings....} not found). My conclusion was that the exclamation mark in the diagram stating that bindings is unknown was the cause.
The real cause of the problem I described above.
Thanks
Timo -
T61 - No sound - Audio Device on High Definition Audio Bus with yellow exclamation mark
Hi,
I am not sure when it started but suddenly my T61 has no audio/sound. I checked the Device Manager and did see the Audio Device on High Definition Audio Bus with yellow (big) question mark with yellow exclamation mark superimposed on it. I downloaded, from Lenovo Support site, the 7ka114ww.exe , hoping to fix it by un-install that device, reboot it, and re-install using the download exe file, but to no avail.
Any suggestion or help is really appreciated. Many thanks in advance
PS. I also see the Base System Device pop up after a reboot and ask to be installed ?!? That pop-up had been there for a while before the audio/sound was lost.
Solved!
Go to Solution.Hi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help. -
missing masters in aperture , getting an yellow exclamation mark ,
Q: Is there a way to place an image at 100% without having to do that extra resizing step?
I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
1. Create a new doc
2. Goto Object menu and choose Frame fitting options
3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
Regards,
Pooja -
Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov -
Clients losing Connections yellow exclamation mark still associated
We are having intermittent issue where clients just lose connectivity, they stay associated to the access point but get a yellow exclamation mark.
I have followed the steps in these post but still the issue persists. https://supportforums.cisco.com/thread/2194495
https://supportforums.cisco.com/thread/2002533
WPA2 802.1 x authentication.
We were getting this error before I made the changes
(Cisco Controller) >*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Key exchange done, data packets from mobile 08:11:96:80:33:e0 should be forwarded shortly
*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Sending EAPOL-Key Message to mobile 08:11:96:80:33:e0
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Jan 31 11:58:25.141: 08:11:96:80:33:e0 Updated broadcast key sent to mobile 08:11:96:80:33:E0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-Key from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 08:11:96:80:33:e0
After I made the changes there are no errors in the debug just clients stops working with yellow exclamation mark, cannot reach default gateway.
We also recently enabled Rogue policies auto contain rogue on wire and Using our SSID.
WLC4402 7.0.235.0
We want to upgrade the WLC software but want to make sure it’s the issue.Okay... well at least its not the WLC code or AP tht is an issue. RLDP whould only be used on monitor mode access points, When used with access points that serve clients, the AP when detecting a rogue, will drop all associated clients. The AP's will do rogue detection anyways, so no need enable RLDP.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Yellow exclamation mark in references: What does it mean
In my c# project, i have references to c++/cli and native c++ projects under "references". (i need to have them there, in order to be able to use msbuild on my solution from the command line.). all of these projects have yellow exclamation marks overlayed
to the "reference" symbol. (vs 2010). i can't find any explanation what these symbols are supposed to tell me.
any ideas ?
WM_THX
-thomas woelfer
http://www.die.de/blogHi Thomas,
I think this behavior is a warning to user that the native dll referenced by C# project is not supported there.
And I cannot say if it is by design or just a bug, would you mind sharing the connect link here, so that others could see and vote on it?
In addition, for msbuild issue, you may try MSbuild forum for better suggestions/workaround.
Thanks for understanding.
Figo Fei
MSDN Subscriber Support
in Forum
If you have any feedback on our support, please contact
[email protected]
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Yesterday when opening pictures in Camera raw a yellow exclamation mark started appearing on the upper right corner. This doesn't let me use Adjustment brush as the yellow exclamation mark appears every time I pick the brush and start using it on the picture. It's been like that for two days now. Any ideas?
I did try doing the ‘Purge Cache' now, but it's still the same.
With Ctrl +K you get the normal cache for preview and thumbs and that is not the same as the Camera Raw Cache.
Under the menu Bridge you will find just above the bridge Preferences the Camera Raw Preferences (at least, on a Mac) and in this window you find the option to clear the Camera Raw Cache, did you try that one? -
Ibook suddenly marks photos with yellow exclamation mark
Hi,
I have created several photo albums and had them published. I have always chosen my photos carefully to avoid the yellow exclamation mark. One of my projects was started several months ago and left untouched for a long time. When I went back to the project more than 50% of the photos were now marked with exclamation marks. Then I looked at books that I have finished and had published, and they too have exclamation marks on some photos. I went to a local Apple Store and the "geniuses" were stumped. Any ideas on what may have caused this spontaneous mutation...and how I can fix it?
Thanks
PS Changing the size of the book project does not seem to make a differenceHi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help. -
ITunesHelper Login Item - Yellow Exclamation Mark
Hey people!
I was checking my login items and saw that next to the iTunesHelper there was a yellow exclamation mark... It said that "this item could not be found"... I upgraded my OS to Mountain Lion and it is a bit slow.. You think this could be a contributing factor?It's old. Remove it.
If you go into you iTunes settings, the checkbox to have it open iTunes when you attach a phone or ipad is what causes it to be placed in the login items.
Not likely. -
Yellow exclamation mark--what does it mean?
Hello Aperture experts: I've just started using Aperture and am designing a book. Certain images I've chosen are posted on the layout page with a yellow exclamation mark in the corner. I get it that Aperture is trying to warn me about something, but what? Does anyone know? Thanks.
What are the pixel dimensions of the photo and what is the size you are printing it?
Depending on your personal quality expectations you may find that if you are close you will be ok - i often print photos with the warning knowing that it is my risk
Basically you should have at least 180 dpi to avoid a warning - so a full page 8.5 x 11 print requires a photos of 1530 x 1980 or larger - and remember that if you zoom the photo that reduces the dpi
LN -
Windows 10 Video driver has a yellow exclamation point
P3 171 issues and windows 10 Video driver has a yellow exclamation point in device manager . when installing the windows 10 vga driver it says it is not applicable (untested drivers Bahh) issues with the chpset drivers it will not load either
[subject line edited to reflect new topic]Go ahead and install the 8.1 driver from Acer, it'll work better than the one you are using now.
-
Synching has resulted in exclamation marks beside most of my i-tunes songs
After buying some new songs on i-tunes I then synched with my i-phone. There was some problem with the synch so I agreed to some message that mentioned erasing stuff (!!) Since doing that I have most of my songs on my iphone but virtually all the songs in my i-tunes library have an exclamation mark beside them and when I try to play them I get a message saying' the song could not be used because the file cannot be located'. It gives the option of locating it but when I click on that it takes me to a folder that only has the new songs I purchased today.
I figure I need to get the songs that are on my i-phone back onto my computer i-tunes folder but I'm nervous about doing anything else that may muck things up even more - any advice?Hello .tim barron,
The article linked below provides steps that can help locate your missing media, resolving iTunes' inability to locate the affected tracks.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Allen
Maybe you are looking for
-
Can a BO XI R2 Cluster Span Two Subnets?
We were able to setup a BO XI R2 two server cluster using two servers on the same subnet. Server A at IP address -.-.---.45 Server B at IP address -.-.---.46 Schedule reports and ad hoc queries through the web servers (on both machines) opera
-
List view component not being ordered
I am using the list view component to represent my table data. for creating a new row, i use a popup which has a separate taskflow in which i create a new row. Now i need to refresh the list view component after this new row is created. I am doing th
-
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
-
Ive been trying for 2 days now to get iOS 7, I have deleted all of my apps, all of my pictures and all of my music yet it is still saying I do not have enough storage for the new update. Does anyone know how I can fix this or what might be taking up
-
When I try to import the svgz file that I created in Indesign, Flash MX 2004 says that it does not recognize the file type. I thought Flash used vector graphics for it's images.