LAN turn off after few time while Satellite L300D-10B is working

The main problem is that when I trying to download something long, after few time (30 min to 1 hour or something near value) the network card is turning off and does not work again when I disable/enable it. It only began work when I reestart my notebook.
+Notebook buyed in january of this year.+
Model is: *Satellite L300D-10B*
I'm trying to reinstall network driver & etc. But this is not helpfull.
i think this si about wake on or sleep settings of network card, but I'm turned sleep and @auto turn off@ to off.
Help to repair this problem.
Best Regards!

You should try to update the BIOS so check the Toshiba website for an update:
http://eu.computers.toshiba-europe.com
Make also sure that you have all updates and Service Packs for Windows installed.
Visit the Windows Update website.
Maybe the problem is also caused of the firewall or security suite. Update it or change the software.

Similar Messages

Apple Mac book pro just turns off after few seconds after turning on

Hi Folks,
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
Please help...
Regards,
Nadeem

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

Hp zr2740w turns off after few seconds

I have the same problem as described in an earlier post:
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/hp-zr2740w-turns-off-after-few-seconds/m-p...
My HP zr2740w turns off after a second or so. Tested with vga/dvi/displayport and desktop pc/laptop, so it's not a cable issue.
My hp zr2740w was bought in July 2012 so it's probably out of warranty. I live in Finland. The webshop I ordered the hp zr2740w does not exist anymore. The HP support pages don't seem to have any support numbers for displays.
I took the display to a local IT support / electrician guy and he said it's a power supply issue. But he couldn't find a place to order the part so he could replace it.
Hopefully I'll get some answer here or an idea what to do. Wouldn't want to throw away an expensive display just because it has power issues.

@Joni_k
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next. And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
B-rock

Macbook Pro 13 turns off after few seconds.

When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

WRT1900AC 5 GHz WiFi LED lights turns off after few days

This is a weird issue. After a few days of flawless working, suddenly the 5 GHz signal LED lights on the router (WRT1900AC) goes off. Clients on 5 GHz are connected fine and everything on router page looks normal. Turning off all activity lights from web interface and turning it back on doesn't restore the 5 GHz signal LED.
Last time it happened - I left the router to run to see how it behaves. It started dropping internet connection speeds to bare minimum after a day. It appeared like throttling and after a while all clients were not able to access router admin page. Then forced a power reset that brought back everything to normal. Now it's gone again after a few days of continuous run. Looks like a pattern that I cannot interpret.
Anything specific that can cause this issue?
Note: Running the latest version of firmware.

Good to hear. I'd go with Linksys. Even though I maybe a "refurb", it's probably been thru testing and should work well. Nothing wrong in getting one from Linksys. At least you'll have a warranty with Linksys after you get the one from Linksys and have a case #.
Let us know how the RMA one works out.
Cstmkr wrote:
I spoke to Linksys support. After reconfiguring the router and verifying settings again, 30 minutes later the 2.4 light turned off, even though I had a connection. I called them back as instructed, as they suggested an RMA through Linksys, not Amazon. The only downside to that is that I have to pay for shipping the defective router back to Linksys.
I feel a little more comfortable getting my replacement router directly from Linksys. I will update this post in about a week.

WIFI turns off after 30 minutes while streaming from the internet.

Unless my Touch (2G - 4.0) is plugged in, streaming of videos using Safari or NFB (National Film Board of Canada) will cease after exactly 30 minutes. The WIFI icon disappears. I have tried different routers, tons of setting changes, reset network connections on the Touch, etc. I KNOW that is not the problem. How do I keep the WIFI on so that streaming is not interrupted?
When using the NFB app, I can see that it is still downloading ahead (buffering) of what I am watching and that stops. Exiting app and going back in turns the WIFI back on but I have to watch from the beginning again - and then it stops after 30 minutes.
If the Touch is plugged in via USB, the WIFI icon remains on. I have currently set my mail to fetch every 15 minutes and so far that has kept it on but at some point it won't and I really don't want to fetch email on my Touch anyway.

I had the same problem when I upgraded. In my case it definitely was the power supply. In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived. Swapped in a 430W to test and everything was perfect. At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

My ipod due not turn off after it go into water

my ipod touch 4g due not turn off after it go into water the screen dont work only the block botton and the menu one. if you can answer i will be thank you to you.

Dry the iPod by:
How to fix a wet iPod or iPhone | eHow.com
Then try the standard fixes:
Reset:
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Retore to factory defaults/new iPod
If still problem then your iPod needs service.

Mac mini turns off after watching movie in front row

we were watching movies through front row on my mac mini (intel core duo from 2004, 1 gb processor) and it turned off a few times, all within about 15-30 minutes of each other. I just upgraded to leopard a few months back but have not had any issues until now. the mac mini is also connected to a hard drive where we store our movies.
Has this happened to anybody else?

I have the same problem. It's pretty annoying and renders the app useless. For now I solved the problem by preventing my Macbook going to sleep via the power settings. Since this is a waste of energy, I would appreciate any suggestions.

For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/

Screen turns off after a few minutes and needs to be closed then opened

hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
ross

Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

The video on the Camera app seems to turn off after a few min...I am trying to do a 20 min video. What am I doing wrong please?

The camera app has a video feature on it and I tried to do a 20 min video but it seems to turn off after a few minutes. I tried twice with the same results. There is no info under settings or anywhere on time restraints. Does anyone have any suggestions please?

Sasabean-
I do not know if this is related to your problem, but there is a setting on the iPad called "Auto-Lock". Mine is set for 5 minutes. One of the options is Never. See Settings-General-Auto-Lock.
Fred

IOS6 and iphoto, iPad, Apple TV sync problem still unresolved. Turning on and off a few times have not helped. What should I do now? wait for an upgrade fix?

iOS6 and iphoto, iPad, Apple TV sync problem still unresolved. Turning on and off a few times per community advice have not helped. What should I do now? wait for an upgrade fix?
"&" is not the obvious bug/answer. Not sure what went wrong as I cannot select albums and events for sync. Situation is worse for iPad and Apple TV when error 1140 message popped up even before backup get completed.

Download and install the iPhoto 9.4.1 update, which was just released today. It may be the answer to your problems:
http://support.apple.com/kb/DL1598
Be sure that neither iTunes nor iPhoto is running when you install the iPhoto 9.4.1 update. After installing the update, then restart iTunes and iPhoto. By default, "All photos" is selected. Change this (it's no longer grayed out) to "Selected albums..." and you should be OK.

TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

LAN turn off after few time while Satellite L300D-10B is working

Similar Messages

Maybe you are looking for