Landed cost when load has been moved to another warehouse???

Hello experts,
I got the following scenario and need your advice:
1. Goods Receipt created for item X- Warehouse In transit
2. Landed cost entered based on our "best estimation"- Warehouse In transit
3. Inventory transfer from Warehouse In transit to General
4. At that moment, we recieved invoice from our custom agents that confirms landed costs and there is a variation with our initial estimation.
5. If I create a Landed cost document based on 1st Landed cost, the item cost would increase for the item at "in transit" warehouse and NOT where the load actually is...
SO, how could I assign landed costs after the load has been recieved and transfered to another location?
Looking forward to your prompt reply,
Thank you

We have a lot of product that comes from overseas. So our In-transit warehouse is the first location the product moves in after taking possesion of the product. If I recieved the goods at the "General Whse" location that could cause confusion among Sales and procurement people t as they would see an inventory that has not arrived to its final destination.
Is there any other solution?
Regards,

Similar Messages

Question has been moved to another forum.

Question has been moved to another forum.

The OP decided to repost his question in the contributor's forum:
*https://support.mozilla.org/forums/contributors/708518 Problems ahead with "plugins.click_to_play"?

How do you get songs off of itouch when it has been sycned with another computer

How do you get songs off an ipod touch to a new computer when the ipod touch has been synced with another computer. The other computer died. Thanks!

You don't. Unless they were purchased from the iTunes store, then you can go to File > Transfer purchases. Or you can right click (ctrl click if you're on a Mac) on the name of the device in the source list in iTunes and then choose Transfer purchases.
http://support.apple.com/kb/HT1848

Highlighting Source Data When Chart is been moved to Another Sheet?

Hi,
I know that when a chart is chosen, it's corresponding data becomes highlighted when the two (table and chart) are on the same sheet. Is there a way to highlight the data when the two are on separate sheets, so one could toggle between the two sheets and make changes as necessary? I know I can move the chart back to the data sheet, make the changes and then move it back again to its own sheet. I have to do this, anyway, if I want to crop the chart (without deleting data) or shift the data in the chart to the right by a column or two, for example, but it would be so much nicer, if I could just highlight the data 'remotely' from the chart, so-to-speak. I have a couple of other reasons for wanting to do this also:
(1) I make my charts almost full screen size, so moving them back to the data sheet cuts them off (tough to see any changes without scrolling or shrinking the chart).
(2) I have multiple data tables on one sheet with multiple charts to complement the data tables. Putting all the charts and data on the same sheet can make for one very untidy sheet no matter how big the screen.
I've looked around on the forum and in Numbers Help, but found only one reference to moving charts to separate sheets. Unfortunately, it didn't address this particular issue. If I can suggest this to the Numbers developers, where can I go?
Thanks!

Hello
The only workaround that I found is to use an auxiliary table in the sheet where you display the chart.
In this auxiliary table the used formula is:
=Feuille 1 :: Tableau 1 :: A
Yvan KOENIG (from FRANCE mercredi 27 février 2008 16:00:7)

Failing to create an email with outlook interop when outlook has been opened by another user account

Hello
I have an addin that customizes the excel ribbon. I added a button so that when the user clicks it, a new outlook message windows pops up with some default information on the email body, CCs, etc.
The problem is that if outlook is already running and it's running under another user account different from the one that was used to open excel (e.g. after opening excel i open outlook with shift + right click and then "Run As..."); i get an exception upon
instantiating the outlook interop object:
Microsoft.Office.Interop.Outlook.Application app = new Microsoft.Office.Interop.Outlook.Application();
The exception message reads:
Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)).
What can i do to prevent this issue from happening?
Thanks

In that situation I would test first for an existing Outlook process running and hook into it if it is running. If it's not running then I'd use new to create an Outlook session. There can only be one Outlook session running
at a time.
This sort of code will do the trick for you I think:
System.Diagnostics.Process[] processes = System.Diagnostics.Process.GetProcessesByName("OUTLOOK");
int collCount = processes.Length;
if (collCount != 0)
// Outlook already running, hook into the Outlook instance
outlookApp = Marshal.GetActiveObject("Outlook.Application")
as Outlook.Application;
An else there would create a new Outlook.Application object.
Ken Slovak
MVP - Outlook
http://www.slovaktech.com
Author: Professional Programming Outlook 2007
"wildarmss" <=?utf-8?B?d2lsZGFybXNz?=> wrote in message
news:870d6093-a7fb-4431-a38f-1896ce4cf963...
Hello
I have an addin that customizes the excel ribbon. I added a button so that when the user clicks it, a new outlook message windows pops up with some default information on the email body, CCs, etc.
The problem is that if outlook is already running and it's running under another user account different from the one that was used to open excel (e.g. after opening excel i open outlook with shift + right click and then "Run As..."); i get an exception upon
instantiating the outlook interop object:
Microsoft.Office.Interop.Outlook.Application app = new Microsoft.Office.Interop.Outlook.Application();
The exception message reads:
Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)).
What can i do to prevent this issue from happening?
Thanks
Ken Slovak MVP - Outlook

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

E-mailing users when data has been loaded.

Does anyone have some information on setting up FDM to e-mail certain users when data has been loaded for certain locations? Not sure what steps need to be taken to setup the FDM server, FDM and just wondering if there are any generic scripts that can be used.

You would need to write a custom script to do this. You can use the E-mail Accelerator to do this, and it would need to be included in an event that fires after load.

BB ID & APP (The page you have requested has been moved or no longer exists. (EC ))

I changed my email associated with my BB ID on my desktop, after upgrading to OS6 on my Curve 9930:
NOW............
Playbook & Curve - "App World is having difficulty connecting to App World Server. Verify Network Connections."
Deskptop (Blackberry ID) - Only Allows me to see "Logout" and see "Account Details"
Should i change my email back to what it was?
Should I wait 24 hours and try again?
Is there someone I can call to review the issue?
This is the messsage I see when i try to log in to (App World) on Desktop:
Page Not Found
The page you have requested has been moved or no longer exists. (EC )
To return to the home page please click here

Please try optimizing your browser (clear cache, cookies, internet history, download history, etc.)
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?

I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg. I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
Thanks for any help you can give!
AVM

Looking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow. You probably can't use the flash that close up and should back off and zoom in further. Experimenting would give you a sense of what situations will have a shadow of the lens or not.
Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13. If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
You can certainly download the PSE13 trial and see if things look any different, but they may not: Download a free trial or buy Adobe products | Adobe downloads There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
One more thing, the White-Balance tint is set to +10 by the camera:
This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG. So there is more than just changing the camera profile that you can do:

Which event is triggered after a column in a gridstyle treeview datawindow has been moved or resized

Hi all,
I'm using a gridstyle treeview datawindow with 2 levels.
What I want to do now is when I move the most right column on the screen e.g. 2 columns to the left the information in the level 1 should stay at the same place but the information in the detail and the header level should move to the left.
I wrote a function that is doing what I want and it works fine if I call that function in a clicked event of a button: e.g. I move the most right column to the left and then click the button to simulate that a event has been triggerered after moving or after I resize a column and then hit the button.
So my question is what can I do to trigger my function after a column has been moved or after a column was resized?

Hi Thomas, Try these steps:
1. Create a ue_lbuttonup user event mapped to pbm_dwnlbuttonup in DW control.
2. Create another user event named ue_checkmodified. This is not mapped.
In ue_lbuttonup, enter the below code:
This.event post ue_checkmodified()
In ue_checkmodified event, enter:
If this.Object.DataWindow.Syntax.Modified = "yes" Then
... Your logic goes here...
End If
That's it.
HTH,
Neil

HT1097 Unable to export movie "because file _ has been moved"?

I just made an entire movie in Imovie 08. When I try to export it, I get a box that pops up that says "searching for File (some number like 8 or 10)", at which point the only button I can hit is "stop". Then another one pops up about how it is unable to locate the file because it has been moved, and then I have the option to Search or Cancel. I've tried "searching", but I have no idea what "File 10" or "File 8" are. I have thousands of video files, and none are labeled that way. So I have to hit Cancel and then the whole export is cancelled.
Its obvously saying my files have been moved, but I have no idea where to...nothing has been moved since I started the project.
Help. I've never had a problem like this before.

jonred wrote:
.. "*Unable to prepare project for publishing*
The project could not be prepared for publishing because an error occurred. (-41)"
error-code# -41 indeed indicates a vague 'memory full' error.
in case, you're using an ext. HDD - is it 'Mac'-formatted? Or fat32, ntfs, etc.?
but this doesn't mean alone the target-disk, but the internal, 'MacOs'-disk too.
things to test:
• simply relaunch your Mac - maybe some 'pointers' are simply .. kaputt ..
• did you partition your internal drive? - if so, the 'macOs'-partition needs at last 20-40 GBs free for any conversion-process.
or is it a 'solid' single partition with some tons of free disk-space?

Accessing old versions if the document has been moved off of iCloud?

Can older versions of a Pages document be accessed if the document has been moved off of iCloud?

Well you can try this, but I'm not sure it's going to work if this is an entirely new ID.
Go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT1338 I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system?

I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.

Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there.

I have Words with Friends app on iphone and game on computer. When I try to play with Facebook friends message says" Account Already Connected. This Facebook account has been connected to another user." How can I play game on iphone or my pc?

I have Words with Friends app on my iphone4S and the same game on computer. When I try to play Words with Friends with Facebook on the iphone the message says" Account Already Connected. This Facebook account has been connected to another user." It is connected to my computer. How can I play game on iphone?

Hi Grandmaz5,
If you are having issues connecting to Facebook on your iPad, and you have already troubleshot the Facebook app itself, you may want to check the built-in iOS settings for Facebook; you may find the following article helpful:
iOS: Using Facebook, Twitter, and other social network accounts
http://support.apple.com/kb/HT5500
Regards,
- Brenden

Landed cost when load has been moved to another warehouse???

Similar Messages

Maybe you are looking for