Landline still not working after 1 week, dsl was out ~2 days but back online

I'm in northern virginia (arlington); sometime last Sunday (8/28) we lost our landline.  yet, dsl was working fine.  verizon self-help diagnosis indicated landline problems, so I put a ticket in for service for following friday (9/02); but service tech never showed up.  worse, my dsl died sometime wednesday 8/31 and was down for 24-36 hours; it came back late thursday night and is working fine, so far. I heard from the front desk at my apartment complex that there was a major flooding during the storm, and the glebe road CO was flooded, so almost everyone with a landline was dead.
UPDATE.  ok, got call from Verizon on my landline @09:30AM Sunday 9/04.  and so far everything is working as usual.  and dsl is up and running, good dl speed tests.  My guess is almost everyone at the NoVA Arlington CO will be back up soon, if not already.
Solved!
Go to Solution.

UPDATE: 09/05/11 @10PM Well, it seems my landline has once again died.  It was fine for almost 30+ hours.  we'll just have to wait and see what's going on.  dsl is fine, so that's a big plus.

Similar Messages

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • The date and time is not working after setting it to current date and goes back to may,26 2011

    the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

    On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar).  Also make sure your date and time on your computer is correct as well as the Time Zones on both.

  • I keep pressing  verify and it not working can you help me out , Thanks Please reply back .

    I keep pressing  verify and it not working can you help me out , Thanks Please reply back .HELP!

    Have you tried logging out of your account on the phone by tapping on your id in Settings > iTunes & App Stores and then logging back in and seeing if that 'refreshes' the account on it ?
    If that doesn't work then you can contact iTunes support via this page (these are user-to-user forums, you are not talking to Apple here) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Iphone 4s camera still not working after replacing and restore?

    I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

    Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
    Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

  • Creative zen V+ still not working after coming back from assistance for the second ti

    hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

    For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
    You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
    When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
    All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
    Good luck,
    Dale

  • Flash still not working after enabling it on windows 8.1?

    I followed the instructions on the help section and enabled flash, however it is still not working. I then tried to download it and the page takes me to the instructions on how to enable it.
    I have just bought a  new laptop and it is fully updated with 8.1.
    Any help would be appreciated.

    Flash Player is actually built into Internet Explorer on Windows 8 and 8.1.  There is nothing for you to download or install from Adobe.
    From the description of the problem, it sounds like you're going to a website and getting a message that Flash Player cannot be found.
    On most sites, there is JavaScript that determines what version of your browser and Flash are installed, so that it can determine what content to show you.  In Internet Explorer 11, Microsoft changed the string that identifies Internet Explorer to those scripts, and it's very likely that the website you're visiting needs to make adjustments to accommodate the change.  There will probably be a bumpy transition period as major web properties notice the problem and fix it.
    In the meantime, Mike's suggestions are good.  Use Compatibility Mode or an alternate browser.  You may also want to contact the website (particularly if they're a small shop) to let them know about the problem.  You're on the early end of the adoption curve, and they might need a head's up.
    Thanks!

  • Flash player still not working after following all discussion advice

    Requested information:  I have Internet explorer 9/ using 32 bit on 64 bit computer/windows 7/flash player 10.2 version
    I contracted what my husband called a "rider" virus when I opened a knitting pattern of all things and if I understood it correctly was one of the anti-malware viruses talked about.  My husband was able to remove the virus but like others have said here, my flash player will not work.  My computer is only 3 months old!
    Here is what we have done:
    1: First removed all flash player and shock wave
    2: I have run a full scan with my Mcafee program, then ran a full scan and quick scan too with my malwarebytes program.  Everything in both is now clean.  I then rebooted (I also even tried doing all of this in safe mode too with nothing changing)
    3: came online and read a bazillion threads about others problems and tried every suggestion pretty much including those below
    4:  husband checked the kill bit (d27 thingy) and it was not there
    5: reinstalled flash player and shock after running the scans and though they show up in my programs when I looked at the add ons as suggest to others the
    neither shockwave or Flash Object was there
    6: uninstalled everything again
    So now I am back to where I started with nothing installed because I still have an issue and we don't know what it is.  I truly appreciate your help in any way as it is frustrating that none of the other suggestions have helped.
    this may not as my grandma used to say have anything to do with the price of rice in china, but we do keep getting a short freeze up on the computer followed by a message that the display driver stopped responding and recovered then it works again, but it does happen fairly frequently and this has been since the virus.  I am showing everything is clean though with regards to virus scans and malware spyware scans.

    Just when I thought I would finally find the answer you sent a message offline, which didn't help me a bit.
    I have the same problem.  My wife got a virus and I was able to uninstall it by poking around.  After killing the virus IE would not run.  I found some messages on the internet which enabled me to solve that problem by making some registry changes.  However, I still have not been able to get IE to run flash.  I do have it running in FireFox.
    What was the step that you sent in private email that enabled him top solve the problem?
    Thanks

  • Podcasts badge still not working after latest update WHY??

    I was hoping the latest update would have fixed the problem with the badges in podcasts! But no still the same!
    It's just crazy to me they used to work before i think it was version 5.2, you just opened the podcast apps and the badges told you how many unplayed episodes you had perfect!
    Now you have to open each podcast and then come out  for the badge to work WHY??
    I have tried to go back to version 5.1 but no Apple will not let me so stuck with this inferior version!

    Take the device to Apple for evaluation, most likely the hardware has failed.

  • "1" key still not working after reset

    I posted a while ago about my 1 key not working on my laptop (iBook G3 800MHz)or an external keyboard. I was advised to try resetting PRAM and then PMU. I finally did both with some help and the process did not fix the "1" key. I am only able to type a "1" by using the num lock key on the laptop or the 10-key pad on the external keyboard.
    Does anyone have any more suggestions as to how I can try to fix this problem?
    Thanks in advance, (and thanks for the suggestion about PRAM and PMU; I liked learning)
    P.S. A friend of mine told me to hide the keyboard .plist from the preferences library but there was no such plist. Is this a difference between 10.3.9 and the new 4.0 OSX? I saw the keyboard .plist on her machine but when I got home I didn't have one.

    Open the Speech pane of System Preferences and check whether either the speech key or the listening key has become set to that keystroke; if so, change the setting.
    (25709)

  • Serial Number does not work after hard drive was replaced

    My hard drive was replaced and now FCP 7 does not work even when I type in the correct serial number.  Help please. Thanks

    You posted your question in the Final Cut Pro X forum.
    You should repost it in the Final Cut Studio forum.

  • HT3669 SCanner for HP 4680 still not working after download of new siftware

    The Scanner is scanning the document but the dicument does not appear in the computer.  I have unloaded and reloaded the software using the intructions but it still does not work.

    Try Image Capture, Preview, or Print & Scanner prefPane. Also, see http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967500#N91

  • Touch ID still not working after update 7.1.1

    Hi,
    Like many other users, I had issues with the TouchID in 7.1
    Just updated to 7.1.1 and the same issues persist.
    Not only am I not able to login with my touchID, I am unable to add my fingerprints upon deleting them. It always gets to the end of the first stage (the inner part of the finger) and towards the last 3 lines, it stops progressing no matter how many times I push it until finally it tells me that the finger is not able to be added and to try another finger.
    I can try to connect it to the power when I get home to see if that fixes it - though from what I've read on the forums, 7.1.1 is supposed to completely fix the issue? I am still not getting into the phone with any fingerprint (literally not working. 0% success rate).
    Anybody else with the same issues?

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Clean the Home button with a soft cloth.
    Follow the instruction carefully, remember to use a different angle each time you scan.
    Here: http://support.apple.com/kb/HT5883
    Remember you can only scan 5 fingers

  • E17 edje still not working after upgrade

    Well, e-cvs seems to be ok on my laptop now.  Still an issue in the battery module, excess space between the battery icon and status text, but that's minor.  edje-cvs still doesn't seem to work for me.  I get an "ERROR: Invalid root filename" when I try to edje_decc filename.edj, but that's been like that since after edje-cvs-20080218 so I didn't file a bug report as nothings really changed.  Anyone else having this problem?
    Edit: BTW, I just downloaded pressh's Kandy.edj and tried to edje_decc it and got the same "ERROR:Invalid root filename" but it works on other downloaded .edj files with 20080218 ??????
    Last edited by bgc1954 (2008-03-28 19:09:58)

    Now I'm really confused--well not too badly.
    I upgraded back to edje-cvs-20080327 and now I can edje_decc Kandy.edj.  The original problem only happens now with a custom theme I was working on but I can edje that with edje-cvs-20080218 and not 0327 so it must be something specific to that file.  It also happened to a chrome.edj that I customized from get-e.org but when I did a fresh download, no more problems.  Another customized theme I did will edje_decc no problem either with 0327.  Kinda weird but probably specific only to me so not to worry.
    As far as the battery module thing here are two screenshots showing Kandy and chrome themes with the text spaced way to the right of the battery icon.  This is on my desktop so no status shows but you can see the spacing issue.  I tried your previous suggestion in another post and and changing the spacing line in battery.edc didn't help at all.  But when I use e-cvs-20080218 there is no space between the text and battery.
    http://www.mediafire.com/imageview.php? … tj&thumb=4
    http://www.mediafire.com/imageview.php? … jm&thumb=4
    Btw, pressh, if you want to check that custom theme that won't decompress it's posted on e17-stuff.org as Star Theme.  EDIT: I just had an idea that worked.  I decompressed my custom theme with 0218 and then compressed with 0327 and now it behaves properly. 
    I guess I'll repost my theme on e17-stuff.org so that it is usable by the new edje-cvs.
    Last edited by bgc1954 (2008-03-30 14:50:57)

  • Headphone Jack STILL not working after hardware replacement

    Can someone help me, my headphone jack stop working suddenly from one day to another, it only plays the left channel. I took it to repair store and they changed the whole headphone jack hardware for a new one and it still has the same problem, I thought it was matter of restoring it so it could accept the new hardware but still the same issue. What should I do?

    I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue.  After contacting them a second time I was told my computer needs to be repaired.  Which is not the problem it is a software issue.
    What finally fixed it was (this was done after resetting the PRAM and SMC):
    * Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
    1. Open system preferences
    2. Chose sound
    3. Chose Output then headphones
    4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
    Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
    OS X Mavericks: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Hope this helps others!!

Maybe you are looking for