Landrover Evoque and Voice Commands - iOS 7 / iPhone 5S problems

I have a Landrover Evoque which has Voice Controls.
I also have iOS 7.0.3 and the iPhone 5S.
Before the upgrade to phone and iOS the voice controls worked fine in that it could call a contact based upon voice recognition in the car.
All worked fine until the new software upgrade.
However, if I press the Voice Command button and say 'Phone Call Contact" it returns a response "No Handset Connected" and fails.
However the phone is connected via Bluetooth and ALL of the contacts have been downloaded to the car address book.
Anybody else have this?
Anybody know of a fix?
In case anybody asks - the Bluetooth has paired ok, mad it will make and receive calls - it also will play the music through the Bluetooth.
However this is now more unsafe than it was before.

No.
You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
or on your phone settings - general - reset - reset network settings - you will have to re enter password for known wifi.

Similar Messages

  • TS2634 Home button and voice command problems

    The home button stopped working today on our iPhone 4 and voice command keeps coming on.  I have done a hard restore to no avail.  Any ideas what I should try next?

    No clue what a "hard restore" is, no such function exists.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  If none of this resolves the issue then it is almost certainly a hardware issue and a trip to Apple is in store.

  • Shortcut buttons for both camera and voice command

    Hi
    I am having trouble with my blackberry 8900. I was using my phone and i'm not sure what i did. All of the sudden my camera and voice command doesnt work as a shortcut on either the top of the phone for the camera  or the side for the voice command. Do you know how to fix the problem. I prefer using the voice command on the side and the camera at the top better than using the home screen.
    Thank you

    Hi and Welcome to the Forums!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Language pack and voice command

    Hi i got a new lumia 635. I installed on it Win 10 tech preview and i wanted to try out cortana.. but here is the problem.. i selected im italian i live in italy and my region is Italy.. and guess what.. when i go to date/language settings it says: Italian,
    Language: active Region: Active , Voice command: NEEDS DOWNLOAD, keyboard: italian.
    So the problem is , i cant figure out how to download the speech/voice command in Italian.. i tried everything.. switching language to english restart then back to italian.. Nothing appears.. no windows where it asks to download something, nothing.
    Also if i go under settings--> speech   in the menu its already selected Italian and if i want to change that nothing happens. it just highlights italian in blue and there is no other option.. Help.

    On Thu, 26 Mar 2015 00:36:04 +0000, Carey Frisch [MVP] wrote:
    In order for Cortana to be enabled, the initial install of Tech Preview must be done in the Cortana-supported language you want to be in.
    To resolve your issue, please go to Windows 10 Tech Preview ISO <http://windows.microsoft.com/en-us/windows/preview-iso> to install the localized build in Italian.
    I'm not exactly sure how you expect the OP to install the Windows 10 ISO on
    to his phone.
    Paul Adare - FIM CM MVP
    NT and security should not be used in the same sentence without negation
    -- Joe Zeff

  • E61 Bluetooth and Voice Command

    Has anyone noticed a degradation in the performance of Voice Command while using a Bluetooth headset on firmware 2.0168.06.05?
    I find the speech recognition does not function in the version (it worked flawlessly in the previous firmware) and often the E61 misses the activation button from the headset.
    I'm using and E61 with a Sony Ericsson HBH-610a BT headset.

    I have been using voice dialing with no issues using a Motorola HS850. That headset died and I switched to Plantronics voyager 510 but the voice dialing doesn't work.
    I can hold down the call button on the headset for two seconds, the nifty little tones play and the screen says Speak Now with the progress bar, but after I speak it just returns to the standby screen.
    I tried disconnecting the headset and holding down the record button, which allows for voice dialing, and I get the tones, the Speak Now and progress bar, but after speaking, it just returns me to the standby screen.
    Any ideas on why this used to work with one Bluetooth headset and now doesn't work at all?
    Any help is greatly appreciated.
    Cocoa

  • E55 - language pack and voice commander software

    Hello first! The phone is cool, but i dont have fully packed bulgarian language. I dont mind using english, but want to use voice commands, which i cant because the names in the contacts are bulgarian and they get scrambled and SIND becomes unuseful. For instance Uliqn Pavlov is like you read it, SIND changes it to Ilki Pavlov, and its for every contact. In the menu i got bulgarian, everything becomes bulgarian but cant write on bulgarian, perpahps of the e55 keypad dunno. Whatever im looking for something like this http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/voice-command-features.mspx   just want to use the phone and dont get it out from the pocket

    On Thu, 26 Mar 2015 00:36:04 +0000, Carey Frisch [MVP] wrote:
    In order for Cortana to be enabled, the initial install of Tech Preview must be done in the Cortana-supported language you want to be in.
    To resolve your issue, please go to Windows 10 Tech Preview ISO <http://windows.microsoft.com/en-us/windows/preview-iso> to install the localized build in Italian.
    I'm not exactly sure how you expect the OP to install the Windows 10 ISO on
    to his phone.
    Paul Adare - FIM CM MVP
    NT and security should not be used in the same sentence without negation
    -- Joe Zeff

  • Does the voice command for the iphone 3gs free?

    does the voice command for iphone 3gs free?

    Yes, it is part of the operating system.  Check your user guide in your safari bookmarks about how to use voice controls.

  • X6 music player and voice commands

    How do i add songs to the playlist of music player which is there in mobile. There are 10 songs preloaded by nokia in mass memory but im not able to add them to the playlist in the music player. do i need to install other music player??
    Is the mass storage that is E(16 gb) phone default memory?
    How to use voice commands to open an app or camera?
    do i need press some button then speak,,,??
    Solved!
    Go to Solution.

    no go to music player
    click on a song
    you will see option add to playlist
    the option saved playlist or new playlist appears
    select new playlist a box pops up with playlist in it
    this is now where you can name your own playlist
    now repeat steps ,click on a song aoptions add to playlist you can do multiple song at one go also
    go all songs ,options then mark keep repeating to the songs you want and when finished add to playlist and your done
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I have 2 ipad 2s.  On the newer one I can log in and update to IOS 5 with no problem.  On the older one I get the message "Your Apple ID has been disabled."  Why does it work on one ipad and not on the other?

    I have 2 ipad 2s.  On the newer one I could log in and update to IOS 5 withno problem.  On the older one I get the message "Your Apple ID has been disabled." No other explanation.  Why can I log in on one ipad and I'm disabled on the other?

    Well, I spoke too soon.  Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads.  Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other.  I'm getting more confused by the minute.

  • Removing IOS 5 and reverting to ios 4 (iphone 4) - as it will not allow me to download apps or stream music on radio apps.

    HI
    i updated to ios 5 today on my iphone 4 much to my dismay it cant stream radio apps i paid for anymore because it somehow HOGS the internet, but yet when i tried to play one of the multiplayer adventure games it is fine.  i dont know if its an INDIVIDUAL app issue whereby i have to enable or disable something or something within the settings to do with the itnernet i need to change?
    i cant even download apps on my iphone either it gives an error reading something along the lines of my internet; i connect at home with wifi and successfully stream music radio apps through my home speaker system; or i did do so before updating to this TRASH!. so i'm sure you can understand why i now ask to remove ios5 otherwise there is no point in me keeping the iphone, i have one year left on my mobile contract with orange to pay for.
    i need to perform a downgrade, i have ONE back up from july which would be the ios4 version if i restore it using this back up file in itunes, would it definately remove the ios 5 and put the ios4 backon my iphone ?
    Lorrie

    You can NOT downgrade iOS.
    That said, millions people have updated to iOS 5 without experiencing the problems you report. Why don't you try some basic troubleshooting before you resort to drastic measures.
    Restoring from your backup will NOT revert the phone to iOS 4.
    First, try to reset all settings. This will re-set the network settings and clear any personalization (wallpaper, custom assigned ringtones, etc.) but you will not lose any data.
    Then, try a simple re-set. If that doesn't work, try restoring from your last backup. If that doesn't work, Erase all content and settings and set it up as a new device.  It's possible one or more of the apps you are trying to use

  • Release 10.2.1.527 and Voice Command App

    The Vice Control is not working as it did before this software upgrade. It used to ask, for example, "What would you like to do?" and  say a comfirmation of my command . This makes hands free abilities unworkable while driving. I can still pick up calls and make call using the Q5 but have to navigate through it on the screen, illegal here. I have played with all volume controls and have relaoded this release twice.
    I would love to revert back to the last release since I hadn' t found any advantage to this one only this huge disadvantage! I had no issues with the last release which worked fine for me. I was hoping that this new release would give me greater features, like the marvelous BOLD..no such luck!
    Suggestions?
    RickV 

    You can auto load the old os if you want but you will lose a lot of features I would suggest waiting for a fix.... good luck!

  • After 10.1 iTunes and 4.2 IOS on Iphone 3GS upgrade, old Outlook hang retur

    After hours of fiddling at the worst possible time, I may have got some of my iphone back, but not yet all. Foolishly agreed to upgrade iTunes 10 to 10.1 on Vista 64-bit Home Premium, in order to upgrade iPhone 3GS from 4.1 to 4.2.
    Firstly, iTunes wouldn't run after upgrade. Had to completely uninstall and reinstall iTunes and Apple App; Support, AND manually copy CoreVideo.dll from one folder to another.
    Then the 4.2 installation failed midway and forced a complete recovery and restore.
    Then (and this is the problem I now have, though worked around by temporarily disabling Contact, Cal;endar, Notes and Favourites sync - Mail already disabled) iTunes hangs Ouitlook so the post-Restore sync stalls.
    As I write the sync is finally running - 4 hours of solid fiddling and googling after I started. But I will need to be able to re-sync all my Outl;ook data. I have done the Add-ins check in Outlook, so where do I go from here?

    I notice that the iTunes was installed under the Program Files(x86) Folder and it runs under 32 bit mode.
    It seems something wrong with the installer...

  • Hi all. I've just received my new mac. I'm trying to set up. I turn it on and the apple logo on white screen loads. then the screen turns black and voice command starts. I can't see anything on the screen and it's really annoying me. please help

    Please help

    Found this in the voiceover manual.  Try this shortcut.
    Darkening the Screen
    If you are a sighted user, you can use the screen curtain to simulate a non-sighted user’s experience. The screen curtain turns off all the visuals of the display, leaving a blank screen. This is a great way to learn how to use VoiceOver.
    To turn the screen curtain on and off:
    Press Control-Option-Shift-F11.
    Edit:  FN Control Option Shift F11

  • IOS 5, iPhone 4 - Problem with the order playlist

    Helleo!
    I have my iPhone 4 instaled the iOS 5.
    In the "Music"-App is the order of the Playlist not korrekt.
    Please help me...
    best reagrds
    R.

    So the power button and home key when pressed solo do nothing? But, when you press them together it'll take a screen shot?  If you're still stuck in the settings screen I would go to (from main settings page) General > Reset > reset all settings.  If that does not fix the issue then import pictures and transfer purchases to computer, back it up in either iTunes or iCloud and restore the device.  Setup as new and test the device.  If issue persists just call AppleCare and have it replaced.  But this ultimately sounds like a software issue and not hardware.
    Beware of what you download. Yes Apple screens all applications prior to allowing them in the AppStore but there are a ton of apps out there that will have adverse affects on your device.

  • Hello everybody! iOS 6 iPhone 4S problem...

    My iPhone 4S doesn't find my iPad 2 with Bluetooth, it just doesn't find the tablet, and I don't know why, because both of them are iDevices, running on iOS 6 and iOS 6.0.1...

    Similar here.  I had 76% as of when I finished the download 3 hours and 40 minutes ago, and now my battery is at 40%. 
    In the intervening time, I had one 3-minute phone call, 2 emails (less than 5 minutes on email), 2 text messages, and phone asleep with screen off the rest of the time.  I turned off all location services except Find My iPhone, and set Spotlight Search to index only email, contacts, and nothing else. 
    The last 2 steps worked like magic for me when upgrading to iOS 5, but have not helped much if at all with iOS 6.  I just did a hard reset, and will report back in several hours regarding the apparent effect of the reset.

Maybe you are looking for

  • Hot synch problem - Palm Z22 - stalls on Date book synch....

    I have a palm Z22.   I've had it for several years.  Recently, I downloaded 6.2.   When I hotsync, everything comes up as it should but it freezes on the datebook synch. Here's what gets done in a nano second: Package installer Install Install Servic

  • Cannot Partition 3TB Internal Drive for Bootcamp

    I have read a number of threads and tried a number of things from various websites to get my iMac to use Bootcamp, but no luck. It was so easy with my MacBook Pro. :^/ The basic problem is that when I start with a single, internal 3TB drive with a br

  • How to stop this loop?

    double tempI; for(int i=0; i<=100; i++){ tempI=0; while(tempI<1){     if (Math.sqrt(A-B)>0.001)           //OUT For     else        tempI+=0.01; }I use break, it seems only out while, but not break for. Anyone knows how to break for? Thanks David

  • C Parser only Parses file?

    Re the new Parser for C I can only see a method to parse xml in a file, there doesn t seem anyway to parse froma buffer or stream. Is this correct or have I missed something. Thanks Rob null

  • Creative Suite Failed to Initialize?

    I've been trying all night to install some form of a Photoshop trial with no success. Downloading the installer goes without a hitch, but when I go to install, I get a message saying "Installer failed to initialize. Please download Adobe Support Advi