Landscape and portrait in the same document

Can anyone help, please?
I want to produce a doc in pages which is mainly laid out as portrait, but has a series of tables (1 per page) which i want to be laid out as landscape.
I have tried to use layout break, at the start and end of the pages with the tables, but when i highlight the area for landscaping, the whole doc goes landscape. similarly if i dont highlight, andif i use section break instead of layout break.
thanks for your ideas.

You can rotate the tables! Press Command key and drag one corner. If you hold down Shift at the same time it will rotate with 45 degrees increment The table has to be floting, not inline!.
Here are some other posting on this issue:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=7207708
http://discussions.apple.com/click.jspa?searchID=-1&messageID=7682014
http://discussions.apple.com/click.jspa?searchID=-1&messageID=7408849
and quite a few more.

Similar Messages

  • I need to make Landscape and portrait in the same file ? plz I don't want to go back to word

    Hi there I am trying to have page in landscape and portrait in the same file, but I couldn't, however, if there is a way where we can perform it please advise me as I need to do that for my thesis. Am happy to work only in pages if this feature is not in pages, please find us a solution.
    Regards
    Mohammed

    Export te document to PDf. Open it in Preview. Here you can rotate the a page to horisontal.

  • When Pages will support portrait and landscape page orientation in the same document?

    When Pages will finnaly support portrait and landscape page orientation in the same document?

    Only Apple would know, and it isn't telling.
    Peter

  • Different document restrictions in Acrobat and Reader for the same document

    When I create a PDF in Acrobat Professional 9 with no security, the document restrictions summary shows comments as allowed and I can add comments in Acrobat Professional, but when the same document is opened in Adobe Reader 7, 8 or 9, the document restrictions summary show comments are not allowed and comments cannot be added.
    When I add password security to a document allowing comments, the document properties in Acrobat Prof 9 shows comments are allowed and I can add comments. When the same document is opened in Adobe Reader 7,8 or 9, the document restrictions summary show comments are not allowed and commenting is disabled.
    Has anyone come across this issue?

    How about "Document Assembly", "Creation of Page Templates", etc?
    I am submitting a grant application and they require the document setting is done in the way the reviewers can assemble, change the template, edit, comment on the document.
    When I open the document in Acrobat all these are allowed, and when I open the document in Reader they are not allowed.  Should I assume that whatever is opened in Reader is always in the setting that these are not allowed?  Or is there anything I have to do to change the setting in the "Reader"?

  • Return (122) and Reverse (102) the same document

    Hi,
    I made an goods receipt  mov 101, but the stock was wrong, then reversal document with 102 mov, then I can make a return (mov 122) for the same document that was reversed.
    Can anyone help me, how can I block mov 122 for the documents that have 102 mov.
    Thanks

    Mary & Jurgen,
    I did following:
    1) PO item 0020
    1a) GR 2 pcs in MIGO (mvt 101); --> material_document1 created
    1b) GR 2 pcs in MIGO (mvt 101); --> material_document2 created
    1c) Cancel "material_document1"; MBST (mvt 102); --> material_document3 created
    1d) MIGO-A02-R02 with reference to "material document1";mvt 122; --> material document4 created
    1e) MIGO-A02-R02 with reference to "material_document2"; mvt 122; --> error message M7021
    2) PO item 0030
    2a) GR 2 pcs in MIGO (mvt 101); --> material_document1 created
    2b) GR 2 pcs in MIGO (mvt 101); --> material_document2 created
    2c) Cancel "material_document1"; MBST (mvt 102); --> material_document3 created
    2d) MIGO-A02-R02 with reference to "material document1" (mvt 122); --> error message M7021
    The difference between the items: in ME22N I set GR based IV for item 0030 whilst this was not set for item 0020.
    Based on this I think:
    - if GR based IV is not set, system only checks the "GR/GI balance" for all item together, and doesn't check it for each particular material document
    - if GR based IV is set, system checks the balance for each material document separately.
    Is it OK?
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jan 20, 2010 8:52 PM
    Edited by: Csaba Szommer on Jan 20, 2010 8:52 PM

  • Can you use footnotes AND endnotes in the same document?

    I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09?  I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)...  I would appreciate any suggestions!  Thanks!

    The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
    You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
    That would be the only workaround I can think of.
    Peter

  • How can I use both endnotes and footnotes in the same document?

    My project requires that the document have both kinds of notes. Thanks.

    You may have to split the document into 2, one for each as they seem to be an either or option.
    Peter

  • Printing to Adobe PDF printer and getting the same document, possible??

    Hello:
    I need to split a page A4 into 2 pages, it's possible using print, then tile large pages, the problem is that my original document is black and white, but the generated one has a shades of gray visible when zooming to 800% (and the size is much bigger), so my question is:
    is it possible to print a document to Adobe PDF printer and getting exactly the same document?? same size, same black and white
    I'm using acrobat6

    I suspected as much.  I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected.  I only installed the local printer to see if the RDP session
    tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer.  I am disappointed but not surprised.
    Edit:
    Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
    Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
    to “Disabled” but
    with no luck.  In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether.  I have concluded that this approach will not bear any fruit.

  • How can I use two different page orientations in the same document?

    I am trying to have both portrait and landscape page orientations in the same document.  Pages doesn't seem to like this.  Is there a way?

    I tried to comment on another thread about this same issue, but the thread was closed.
    In the other thread; however, some asked why rotating one pages was necessary, and if they knew then maybe there would be reason to create the function.
    Well, I don't know about why anyone else needs it, but for me it's for the papers I have to write for my masters program. The professors like to have the rubric attached to the bottome of the document so they easily grade and keep things organized. They of course give directions on how to easily change the orientation of the last page in Word, but not all of use Word, or even want to use Word. Maybe I need to ditch Pages and go to Word? I'd really hate to do that!
    So, come on Apple, let's get this feature added, stat!

  • Portrait and landscape in the same document.

    Hi there. I'm trying to print a portfolio that has both
    portrait and landscape pages in it. I understand that I can change
    printing propoerties to print in either portrait or landscape, but
    is there any way to configure settings so that both are present in
    the same document?
    Many thanks in advance.
    Regards
    irthom

    You can't do that in Pages. You either have portrait or landscape orientation of the pages. What you can do is rotating the content of the page if it is an image, objet or table.
    If the document is for reading on the screen you can export the document to PDF and in Preview rotate the page.

  • In Pages, is there a way to have both portrait and landscape pages within the same document?

    Question: In Pages, is there a way to change the orientation within the same document so that one page is portrait and the next page is landscape, for example?

    Hi Vicki,
    You can rotate in Preview. See this discussion:
    Re: rotate second page so will print as booklet
    Regards,
    Ian.

  • Pages 09 - Portrait and Lanscape view in the same document?

    Is it possible to have landscape and portrait layout in the same document?

    Tim,
    You're welcome. I don't concern myself much with what Word can or can't do. The issue here is just how to get the job done in Pages with its supporting cast. You may Provide Pages Feedback and if enough voices are heard, you might get your wish. http://www.apple.com/feedback/pages.html
    By the way, Preview is a wonderful program, in my mind. The more you use it, the more you will depend on it.
    Jerry

  • How do i have landscape and portrait slides in the same keynote file?

    how do i create landscape and portrait slides in the same keynote file?

    You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
    The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

  • I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem.

    I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem. Uninstalled it. Still have the problem with Firefox.
    == This happened ==
    Every time Firefox opened

    How about if you right click on the PDF and select Save Link As..., and then open it locally from within Reader? Does it work ok then?  That might be a workaround until the issue within the browser is resolved.
    Rob Jaworski
    Intl Program Manager

  • My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

Maybe you are looking for