Landscape and Portrait Page Format Settings for Printing

Hi Experts,
The client requirement is to print the Smart form in 8.5 * 11 (inches) in (Portrait) mode.
In my page settings i have kept the Page Format = 'LETTER' .
However when the page is printed , the formatting comes out to be A4(Landscape mode).
Please let me know what i am missing.
Thanks

Hi Abhishek,
I can suggest couple of options here.
Check the settings by clicking on the Page you have created. Under O/P options we need to ensure its A4 potrait.
Secondly you can create a custom Page Format with Potrait & Lanscape both options and depending on printer settings it will dynamically decide if we need to print Landscape of Portrairt
Also check the Default printer Settings.

Similar Messages

Investigate book with both landscape and portrait pages

I've an old book where I sucessfully swapped landscape and portrait pages, but there are complications why I cannot use it as a model for my current project. Since I no longer remember how I accomplished this, I have to investigate how to build a book with both landscape and portrait pages.
I know about paragraph tags set to use a new page. Also a table on Reference page which lists Paragraph Tag Name, Right-Handed Master Page, Left-Handed Master Page, Range Indicator.
But this doesn't seem to be enough; something is not working.
Could you please point me toward resources which discuss how to do this?
Thank you kindly,
Theresa

I think there was a big discussion of this already either here on the forum or over at the Frameusers.com list (I forget which). Try googling -

Landscape and portrait page orientation in forms.

Could anyone let me know how to have both portrait and landscape page orientations in a form.
Building an audit report and need (would be nice) to have both in one single form.
Regards,
Raffe.

Hi,
You just need to set up two Master Pages and then set the pagination for the design pages, as to which Master Page they relate to. There is an example here: http://assure.ly/ewrLMo. (have a look how the form uses both Master Pages).
Niall

Printing landscape and portrait orientations in LR

I have usually been printing from Qimage or QTR for my black and white, despite having heard good things about LR's print module.
This afternoon I thought I would give LR a whirl at printing. I had a series of 4 photos (3 portrait orientation, 1 landscape) selected which I wanted to print one per page. In Print they all appeared oriented in the most logical fashion as I paged through the 4 pages (i.e. the longest dimension of the image ran down the longest dimension of the paper).
I then selected my profile for my paper and hit Print... to go into my printer settings (Epson 3800) for that paper. These latter settings exist for both landscape and portrait orientations of my papers. As I had both landscape and portrait images I wished to print and the settings for the printer driver dialog are identical for both apart from the media orientation, I chose the landscape to get a quick feedback on whether LR would be able to handle a mixed bag of portrait and landscape images.
As I feared, my first print (which was an image in portrait orientation) came out with the long axis of the image squeezed into the short dimension of the paper....so LR saw the choice I had made of a landscape orientation within the printer driver as a hard and fixed choice. Does this mean one can only do print runs of either portrait or landscape oriented images in LR and never combine the two?
I realize there may be an easy answer to this as I've really not used LR for printing till now.
Thanks for input,
Dave M

Thanks DJ-G....I can't swear but I am almost positive I had Rotate to Fit checked....indeed that would explain why when paging through the 4 pages in LR they were rotated to fit in the correct orientation. I'll check again. I do understand with Custom Package etc. we can print landscape and portrait when printing multiple images on the same page but my specific concern is printing one image per page and whether LR can handle a series of such prints in one print job if the images are a mix of landscape and portrait orientations.
DM

Landscape and Portrait Orientation Problems

Hello everyone,
I am working on my first iBook using iBook Author. I am having a heck of a time understanding how to make something look good in both Landscape and Portrait orientation.
For example, I am curious how to make the spaces between paragraphs disappear in portrait view, if I had to use them in order to make the landscape view look proper in terms of formatting. In depth, if I have a text for a section in the book that I need to have at the top of the next column, I am putting my cursor before the text and pressing enter a few times in order to move it along and onto the next column so it is at the top of the page.
Here is a picture of what I am talking about:
The highlighted text has been shifted down so it will be at the top of the next page.
Now this is what it looks like in Portrait orientation:
There are way too many empty lines between them. Also, you will notice at the top that Not Getting In the Way is also too close to the text above it. Correcting that by putting a space between the lines will screw up the Landscape formatting.
Also, adding pictures makes it even MORE difficult to keep both formatted properly and clean.
Any advice would be INCREDIBLE.
Thank you everyone!

Layout in landscape. Edit in portrait....assuming you've not disabled support for it.
Preview/check in both.
See the tips in this forum and
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

I need to make Landscape and portrait in the same file ? plz I don't want to go back to word

Hi there I am trying to have page in landscape and portrait in the same file, but I couldn't, however, if there is a way where we can perform it please advise me as I need to do that for my thesis. Am happy to work only in pages if this feature is not in pages, please find us a solution.
Regards
Mohammed

Export te document to PDf. Open it in Preview. Here you can rotate the a page to horisontal.

Change landscape-and-portrait-folio to landscape-only

Is it possible after mistakenly having produced a folio with landscape-and-portrait-mode setting it back to landscape-only?
In the new content viewer, if a folio is set for both landscpae and folio, but only one layout exists, it shows a grey empty page in the second alignment (before it didn't change the alignment and the picture wasn't changed when turning the iPad).
Now, when you create a new folio, you are asked if this is landscape-and-portrait or portrait-only respectively landscpae-only. We mistakenly have chosen both-alignments and are now having the problem of the empty grey mode in portrait.
Can this be changed after upload the layouts? Is this also happening within the app itself?

Hi Bhaskar,
thanks for your help. My intention is to create a single-orientation layout, but I created a both-orientations-layouts. Before v20 (or 19?) when just uploading one of the orientation into that folio, content viewer and the branded app just showed one orientation and fixed the layout within the iPad. Now, if you choose both-orientations and just upload a single one, you are getting a grey screen in the missing orientation.
I wasn't aware of this fact (maybe because german customers weren't invited to sprint v20 presentation) but I'm afraid that you are right an have to created the folio completely from the ground (which is a lot of more work with import function not running )
Maybe this solves my push notification error with one of my folios I have
Richard

How do i have landscape and portrait slides in the same keynote file?

how do i create landscape and portrait slides in the same keynote file?

You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

Creating Format type for printing ALV output.

Dear Friends,
I am using a format type for printing ALV output print which displays 65 rows and 255 columns on DINA4 page. I want to create a format type which will print 65 rows and 310 columns on 'LEGAL' page format .
So plz suggest the ways along with help links if any.
Regards,
Madan.

Hi Mandan,
As long as I know the maximum column for printing is 255.
Might be you can split your output into 2 rows...
Regards,

Script to make landscape and portrait images square

I am new to scripting and could use a little help.
We are currently rebuilding our enitre website from the ground up. New look, new products, new images (about 2,800 of them). Here is where it gets tricky.
Some of the photos are landscape and others are portrait. I have resized the images to the required 200 pixels wide, but we are now running into the issue where they also need to be 200 pixels high. I could just separate them into two folders, landscape and portrait, and run two different actions, but I would prefer to run an if/than script if possible. Can someone tell me if this is possible in Photoshop? These are images of products, so there is no background.
If the image is larger than 200 pixels high, reduce the image to 200 pixels high. Then, enlarge the canvas to 200 pixels.
If the image is smaller than 200 pixels high, Then enlarge the canvas to 200 pixels high.
These are all 72 dpi, RGB images. Any help would be greatly appreciated.

I have found this JaveScript that does what I need on the PC side, but keep getting an error when it tries to save the image. Is anyone able to recreate this into AppleScript with a correct save function... I am running a MAC, so I need an AppleScript. My coworker has Photoshop on the PC and is trying to use this JavaScript below.
// resize canvas & export JPG
#target photoshop
app.bringToFront();
// Save current dialog preferences
var startDisplayDialogs = app.displayDialogs;
// Save current unit preferences
app.displayDialogs = DialogModes.NO
// Source and Destination Folders
var inputFolder = Folder.selectDialog("Select the Source folder");
var outputFolder = Folder.selectDialog("Select the Destination folder");
ProcessImages();
function ProcessImages() {
var filesOpened = 0;
   if ( inputFolder == null || outputFolder == null) {
   if ( inputFolder == null) {
            alert("No Source folder selected");
    if ( outputFolder == null) {
       alert("No Destination folder selected");
   }else{
var fileList = inputFolder.getFiles();
for ( var i = 0; i < fileList.length; i++ ) {
       if ( fileList[i] instanceof File && ! fileList[i].hidden) {
                 open( fileList[i] );
                 ResizeCanvas();
                 filesOpened++;
return filesOpened;
function ExportJpeg(filePrefix, fileSuffix){
try
var docRef = app.activeDocument;
var docName = app.activeDocument.name.slice(0,-4);
var jpegOptions = new JPEGSaveOptions();
jpegOptions.quality = 8
docRef.flatten()
docRef.bitsPerChannel = BitsPerChannelType.EIGHT
jpegFile = new File( outputFolder + "//" + filePrefix + docName + fileSuffix );
//Save Document As
docRef.saveAs(jpegFile, JPEGSaveOptions, true, Extension.LOWERCASE);
catch (e)
alert("Error when attempting to save the image. \r\r" + e);
return;
function ResizeCanvas()
   function CanvasSize() {
      var docRef = app.activeDocument;
      var docWidth = docRef.width.as("px");
      var docHeight = docRef.height.as("px");
      if (docWidth < docHeight)
            docRef.resizeCanvas(docWidth = docHeight, docWidth, AnchorPosition.MIDDLECENTER);
      else if (docWidth > docHeight)
            docRef.resizeCanvas(docHeight = docWidth, docHeight, AnchorPosition.MIDDLECENTER);
      else if (docWidth == docHeight)
var docRef = app.activeDocument;
var savedState = docRef.activeHistoryState;
CanvasSize();
app.displayDialogs = DialogModes.NO;
ExportJpeg("", ".jpg");
docRef.activeHistoryState = savedState;
docRef.close(SaveOptions.DONOTSAVECHANGES);
docRef = null;
// Reset preferences
app.displayDialogs = startDisplayDialogs;
alert("Operation Complete!" + "\n" + "Images were successfully exported to:" + "\n" + "\n" + outputFolder.toString().match(/([^\.]+)/)[1] + "/");

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project in iphoto. Is there any way to see my print order history and reorder the same book for print ?

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
Is there any way to see my print order history and reorder the same book for print ?

No. Apple only keeps the pdf file for a book for 30 days. Without the library and book project you won't be able to reorder the same book.
Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
OT

How to select the printer and select the ICC profile for printing with VBScript?

I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
Anyone has done this before?
Thanx!
jus

Client/Server version:
- D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

My iPod Touch 5 brightness suddenly turned dim but when I go to my brightness and wallpaper page in settings it is at the middle (Normal Brightness). Is this a bug in ios 6 or something?

My iPod Touch 5 brightness suddenly turned dim but when I go to my brightness and wallpaper page in settings it is at the middle (Normal Brightness). Is this a bug in ios 6 or something?

If the reset does not work I would try the following before going to Apple
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Landscape and portrait phots?

Hi
I want to use some phots to make a youtube video the photos are both landscape and portrait , but when i add the media it only shows the photos in one orientation (landscape) any advice gratefully recieved

Before you import the photos into your project, go to your preferences (under the Edit menu on a PC) and uncheck Scale Stills to Frame Size.
Also make sure your photos are sized to no larger than 1000x750 pixels or they are going to be way to large to work with. You may need to resize them once youv'e added them.
Unless your concern is that the portrait photos are coming in sideways. If that's the case, you'll need to open them in Photoshop Elements, rotate them 90 degrees and then resave them. Note that, although many photos will appear to be oriented correctly in the Organizer or in Windows, they still may not actually be oriented correctly until you open them in Photoshop.

Landscape and Portrait Page Format Settings for Printing

Similar Messages

Maybe you are looking for