Landscape for NWDI

Hi,
I have an web application server WAS in a single box, and NWDI in another box. The WAS was pointed to the sld of its own. Now which sld I should configure to point NWDI to?
From my understanding both of them must point to the same sld, is that true? Should I use the one in NWDI, or I can point NWDI to sld of WAS as well?
Please advise.
Thanks

HI,
Please read this guide "Recommendations for SLD Landscapes" will help you how to setup the landscape with SAP J2EE engines, XI, SAP Portal and NWDI.
System Landscape Directory (SLD)?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582
More help:
System Landscape Directory (SLD)
Thanks
Krishna

Similar Messages

Setting up development landscape for E Commerce R/3

Hi Experts,
Need some good document reference for setting up our landscape for E Commerce 5.0.
I have gone through lot of documents and information but nothing consolidated about best practices to follow while doing so,
In our landscape we will have R/3 DEV, QA and PROD (All ready there) AND
3 corresponding AP 7 boxes for IPC and WAS (to deploy ISA java components)
The missing link in this is how best to use NWDI to talk to the 3 AP systems.
Q1 . Should we have 1 separate Box which has NWDI installed or can we use AP7 box for DEV to also use that for NWDI. (In this case on 1 BOX we will have IPC, WAS/ISA and NWDI.. so worried about performance)
Q2 Just in case itu2019s advisable to have a different BOX for NWDI, then how to configure NWDI to have all the 3 different AP 7 Boxes as part of development landscape to deploy ISA java applications from DEV to QA to PROD environment.
Thanks and regards,
Dips

Thanks for the reply.
My client says they dont have a QA environment. So they just have DEV and PROD. Since its a very small setup, We want to setup NWDI just for DEV and then PROD. Is it possible to not have QA ?
Regards,
Dips

How to active Name Server for NWDI

Hello,
I would you to activate name server for ou nwdi.
The SLD is not installed on nwdi, we use a dedicated SLD Server. The SLD url is filled in the development configuration in CM Services.
From the SLD, in the reservation name part, the "Enable this SLD as name Server for NWDI" button is not available :
I have tries to follow this tutorial, but it is designed for netweaver 7.0 :
http://help.sap.com/saphelp_nw70/helpdata/en/2f/a72f41b239a831e10000000a1550b0/content.htm
Does anyone know how to activate this feature ?
I refer to this button :
Thank for help.

Thanks Irwin !
The button is shown now.
But in the landscape link, our nwdi system did not listed :
I have had one of my nwdi system, choose "add system" in systems tab.
But there is no option :
Thanks

CTS+ configuration for NWDI - Development configuration error

Hi All,
I really need some help on this. we are configuring CTS+ on Solution Manager system for NWDI, EP landscape (EPD, EPQ,EPP) and SLD system.
we made EPD as development system and trying to use CM Services to configure the NWDI scenario SDA/SDC Deployment.
I have created all NON-ABAP systems and created the CTSDEPLOY Http connections. I am getting the popup to configure the Development Configuration,"What is the User I have to use here and of which system?" and what are the authorizations required to configure this.
As soon as the popup comes, It is asking for the user ID and Password. I am entering Solution Manager (Admin user with all CMS actions also assigned) user then it is giving the following error on the screen. " Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
I have give the SLD url correctly, and the admin user for SLD and Password. I have cross checked the user for password, every thing is fine.
I really appreciate your help.
Thanks,
Ramu J.

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Hi Ramu,
Pls answer me for below.
specified SLQ as my SLD
1.
You said SLQ is you SLD, but You configuring CTS on solution manager. but solution manager has its own SLD.
a. SMG solution manager SLD
b. SLQ is also SLD
If there is two sld then you should get error
" Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
This is becuase you are giving the user which is present in SLQ SLD but CTS is checking the Solution manager SLD.
For CTS you should have centralied SLD.
2.
Can you tell me one more thing, in CTSDEPLOY do I need to give the SMG host and port number or EPD's host and Port number?
You have to specify the host and port in CTSDEPLOY of the system on which CTS contoller should work i.e EPD or SMG.
To resolve your all this problem first of all make the SLD as central . i.e Make solution manager ( CLQ ) as SLD or SLD system in you landscape ( SLQ ) as SLD.
don't keep two different SLD . If you keep Solman as its own SLD then CTS will search component from SMG SLD
Pls follow the guide
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
3.
Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function
Can you tell us in which system this SAPNWDI user is present
Check the SLD of of system in which SAPNWDI user i present
system is whether in SMG SLD or SLQ SLD
If you are not clear with my above suggestion pls let me know.
Thanks
Anil
Edited by: Anil Bhandary on Oct 24, 2009 10:28 AM

Documentation and links for NWDI

Hi,
Can anyone send me documentation/links to start with NWDI.
It will be really helpful.
Best Regards
Sid

Hi Siddharth,
How are you??
You can first go through the following blogs:
Now go through the following docs:
NetWeaver Development Infrastructure (NWDI) - Java Development - Wiki
NWDI Overview
SAP NetWeaver Development Infrastructure (NWDI) and DevStudio
SAP Netweaver Java Development Infrastructure
How to Setup SAP NetWeaver Development Infrastructure (NWDI) Permissions and Roles
How To... Development Landscape Scenarios in NWDI
SAP NetWeaver Developer Infrastructure and Java Applications
NWDI Administration Guide
Following is the comprehensive developer's guide for NWDI:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/371ad7e4-0601-0010-1db0-bfbb584f3acfNWDI - SAP NetWeaver Developer´s Guide[/url]
Bye
Ankur

Where is the tutorial movie for NWDI?

I watched a tutorial movie for NWDI last year.
I cannot find it anymore.
Could you help give the link?
Points guaranteed. Thanks!

Hi Jennifer,
Webinar Link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8078ffb4-12a2-2a10-1487-9c1c95f8e5e5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0b1f2c8-54e0-2910-9ab3-b85f15093655
NWDI is Netweaver Development Infrastructure.
NWDI provides an infrastructure to develop Java applications on netweaver platform and is responsible for versioning,building and lifecycle management of these applications developed.
It has mainly three components :
DTR(Design time repository) : for versioning of any file altered.
CBS(Component build service) : for building application in central build environment.
CMS(change management service):to transport and setup logical landscape.
NWDS is netweaver Development Studio.
NWDS is just a development environment with all robust development tools.
It can run j2ee,j2se and sap applications also.
It is an interface to access NWDI services and applications.
Yes,NWDI is webased and url tp access it is http://IPadress:port/devinf.
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/a064f6a3-3c8b-2a10-2bad-f44cca4dbb75
SAP NetWeaver Java Development Infrastructure (NWDI) for more details follow http://help.sap.com/saphelp_nw2004s/helpdata/en/44/312b1a8bea3ec8e10000000a1553f6/frameset.htm
Hope this answer helps in understanding.
Reward points if helpful
Cheers,
Rudradev Devulapalli

Information on 3-System Landscape for XI

Hi All,
Currently we have DEV/QA XI as one system and Prod as another. We plan to seperate QA and have a 3 system landscape for XI... ie, DEV, TEST, PROD.
My Question is
> Any documents on what are the system requirements in doing so?
> Is there any advantage/disadvantage in doing this?
Pavan.

The sysetm configuration might be 2Gb+ Ram with good storage of Harddrive....there can be problem when you have both the dev and QA system on the same server or same instance with dfiferent client......
It;s better to have the Different system for DEV,QA and Production but as far as SLD is concerened standard says to maintain the single SLD but for production it will be good if kept seperate SLD.

Minimum Development Landscape for XI

Hello,
In most cases the proposed optimum landscape for an XI project is the following:
2 XI servers such that
DEV R/3 linked via logical name to XI DEV and
PRD R/3 linked via logical name to XI PRD)
Asking the customer to buy 2 servers for XI in some cases does not sit well.
It is usually the case that the customer (already a SAP customer) has DEV + PRD R/3.
Can we use only one XI server to carry out both productive work and tests / developement work when needed. I am thinkg of filtering messages based on the logical name of the R/3 system. I do not know if this is safe since as far as i know when a DEV system is refreshed and kept uptodate by copying over the PRD the logical name is copied over as well. Therefore the above solution will have a high risk.
Anyone outhere that have faced a similar dilemma and come up with a neet solution?
Thanks
Dimitris Hagigeorgiou

Hi,
No its not at all advisable to have a same server for Dev and Prod. There are certain Best Practices proposed by SAP like DEV>QA>PORD and its advisable to follow it and there are lots of reason behind this kind of landscape.
At this point of time it might sounds good to have a one box which will server as DEV and PROD. But think of if something goes wrong and there are lots of chances to go wrong are DEV. As the name says its a development system ofcourse things will go worng quite often. If the same system is used for Prod then its all Business data and no orgn will compromise of loosing real time business data. There are lot many parameters apart from that like security etc..
Thanks,
Prakash

Template Installer for nwdi.

Hi,
I installed NWDI and in the documentaion I read about executing the DI template Installer as a pre-requisite.
I have never done this before and I checked the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
Is it necessary to do run this? For NWDI for ESS/MSS web dynpro customization, what scenario should I select?
can anyone please explain more about the template installer.
thanks
regards
sm

Hi,
DI template Installer:
NetWeaver 2004s Usage Type DI (NWDI) Installation
template installer
http://help.sap.com/saphelp_nw04s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
ESS/MSS web dynpro customization
Customizing ESS Business Package using Web Dynpro
Regards,
Senthil K.

BI dual landscape for upgrades

We recently built a dual / parallel landscape for our BI system to support a support stack upgrade.   I've used the dual landscape concept for many years when doing ERP upgrades, and it has worked very well.   We thought a dual landscape for BI would work also.   However, we did not consider the automatically generated objects in BI.
What we found is that with 2 development systems, even though BI objects are created with the same logical name, the technical (generated) name will be different between the 2 systems.
Has anyone successfully implemented a dual-landscape for BI?   If so, how did you syncronize the technical names of objects between development systems without transporting the objects from one development system to the other?   Note: I'm of the opinion that you need to be extremely careful transporting objects between systems with different release/support pack levels and therefore avoid it at all costs . . . Note 1090842 + several bad experiences.   Therefore, I am very unlikely to consider transporting the objects created in PSD to RLD as a valid solution.
The following is just an attempt to better describe the issue:
Production support landscape looks like this:
PSD -> BWP   (these systems have lower release/SP levels than the systems in the release landscape)
Release landscape looks like this:
RLD -> RLQ    -
> Changes will eventually go to BWP after release/SP upgrade in BWP
Lets say queryA must be developed and transported to BWP prior to the release/SP upgrade in BWP.
In PSD queryA is created and gets assigned technical name 123456 and is transported to BWP.
In RLD queryA also gets created, but gets assigned technical name ABCDEF.
Sometime after the release/SP upgrade, when you are back to a single landscape (RLD -> RLQ -> BWP), a change needs to be made to queryA.   When you transport queryA to BWP, you end up with 2 queryA's, one with technical name 123456 and one with technical name ABCDEF.

Hey. I worked for years in a dual landscape environment and at one point, some folks were actually looking at three paths all pointing to production. The three path idea got squashed fairly quickly, but we had two landscapes for as long as I can remember. So we essentially had:
PAD --> PAQ --> Prod
PBD --> PBQ --> Prod
This was very helpful to be able to work on major releases and upgrades while still allowing weekly maintenance releases. I never looked for a document that deeply discussed the concept and pitfalls to watch out for.
I will say the system synch-up could often become quite a pain. This may sound a little crazy but we would transport from landscape A to landscape B but dual code from B to A. This was because A was for the triannual major releases and upgrades and B was maintenance work. There were times when we would transport both ways, but we tried to stay away from that (except for queries).
The idea was that anything that went to prod as maintnenance, out of B, should be dual coded in parellel in A. Then once a tri-annual type release went from A, all those new transports and dual coding would be moved to B. This is how we kept everything in synhc and it worked rather well. You always had to be careful around the time of the tri-annual go live, but that's to be expected.
The only objects we had constant problems with werre queries. I don't know of anything you can do about that. We eventually decided to always transport queries between the two landscapes. We would never manually dual code a query. We would eventually get the duplicate query issue in production. The pitfall here is if the same query is getting touched for maintenance and a major release... that was just something we had to workaround. But we never had any major problems with transporting between the two landscapes. The times it became a huge headache is when people would forget to dual code, or just plain to a bunch of prototyping in one of these environments when they should have been using a sandbox.
Not sure if I have answered your question, but hope this helps in some way. At least you know plenty of us feel your pain!

System Landscape for ESS/MSS in EP60 SP2

I have installed EP60 SP2 on J2EE 6.20 and MSSQL. I have imported business packages ESS 50-4 and MSS 60-1-5. I have created the folder Systems in Portal Content and created a system SAP_R3 with aliases SAP_R3_HumanResources, SAP_R3_Cross, SAP_R3_Travel, and SAP_R3_Financials.
My 4.7 R/3 system is app server R3DEV02.domain.com, system id DEV, sysno 01, client 100. My ITS server is http://itsdev01.domain.com:71/scripts/wgate/webgui/! using client 100. My EP path is http://sapport01.domain.com:50000/irj/.
Given this information, can anyone tell me exactly what parameters I must set in the system landscape for system SAP_R3 and what the values should be for ESS and MSS to work properly? If I go to the System Landscape Cockpit, system SAP_R3 fails all tests.
Any and all help is certainly appreciated.

Hello Gary,
WRT SAP_R3 system landscape test failure, I ran into the same issue earlier, for a SAP_R3_Dedicated system. Keep the same setting values, but leave the system id (DEV) Blank, then test.
Your definition of (Application Server Host Address + System Number) should be sufficient for a SAP_R3_Dedicated connection.
I hope this will resolve your system TEST problem.
Regards,
AAAttar

System landscape for DMS Repository in KM

Hi All,
When I create a System Landscape for DMS Repository in KM which sytem template I should choose?Should I choose
'SAP system using dedicated application server' or anything else?

The problem is resolved.

System Landscape for ESS/MSS

Hi Experts,
I am on ERP2004, EP 6.0 SP20. I am trying to create a system landscape for the ESS/MSS Applications. ALways the connection test fails. This is the landscape I am trying to create:
1. One SAP Dedicated Application Server: for SAP_WebDynpro_XSS
 Connector Details:
Application Host: <host>.<company.com>
SAP CLient: 010
SAP System Number: 00
Server Port: 3200 (Using Dedicated Application Server)
WAS Details:
 Host: <hostname>.<company.com>:50000
 Path: /webdynpro/dispatcher/
 System Alias: SAP_WebDynpro_XSS
System Aliases:
SAP_WebDynpro_XSS.
SAP_ITS_XSS
SAP_ITS_EBU
User Management;
Logon Method: SAPLOGONTICKET
User Mapping Type: admin,user.
When I am testing the
Connector Details:
I am getting the following errors:
1. Retrieval of default alias successful
2. Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
WAS Connection Tests:
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<J2EE Engine Host>.<company.com>:50000)
5. The host name <J2EE Engine Host>.<company.com> was resolved successfully.
6. The server <J2EE Engine Host>.<company.com>:50000 could not be pinged successfully.
SSO is not set up yet. I do not understand why the details of J2EE Engine under WAS details in a system type : SAP Dedicated Application Server? Please help me. I am missing something.
I appreciate your help.
Regards,

Single Sign On set up and every application is working on portal.
But the ping always fails.
I do not understand one more thing from help.sap.com on System Landscape for ESS.
Documentation says:
Set up your system landscape. To do this, set up the following systems:
what kind of system this is: SAP_R3 or SAP_BW/SAP_CRM. In standard portal system template, there is no system like "J2EE engine".

2tier or 3tier landscape for AS/400 ?

Dear all,
My company is considering upgrade options for current AS/400 server. There are 2 options we are considering.
1.) Upgrade the existing box to a bigger capacity to have higher SAPS. Landscape remains 2tier.
2.) Change 2 tier to 3 tier and split the Application Server from the central instance. No upgrade for the current AS/400 server, but just add few more Application server to run in Wintel server.
Have been advised that AS/400 server has self-managed capability and it is not advisable to split to 3tier.
My questions
a.) Anyone out there who has successful story to share in implementing 3tier landscape with AS/400 server ?
b.) Any write-up about the difference in terms of performance between 2tier and 3tier landscape. Or even to share your experience.
Your advise and comment will be appreciated.
Thanks.
Regards,
Kent

The best landscape for as/400 is 2tier as it has self managed capability.

3 System Landscape for NW2004s BI?

Hi All,
Given the scope of BI systems in NW2004s BI, what is the recommendation regarding 2 vs. 3 system landscape for BI?
With BW, it was (relatively) easy to maintain a Dev, QA and Production system. Now with Portal and Java components of BI, the hardware requirements for a third (QA) instance would make it harder to justify?
What experience have people had with 2 vs 3 system landscapes for BI in NW2004s? Has anyone come across an SAP recommendation or best practice for this?
Thanks,
Matt

Hi Matt,
The NW2004s set-up by default installs the EP and other portal components when you select the Java stack. So I guess your question was whether we can have 1 EP system and 3 BW system in the landscape. But from my experience the lanscape has remained the same i..e - 3 BI system and 3 Portals, the reason clearly being that in order to fully utilize the BI7.0 frontend you need a portal. Now using 1 portal would put lots of load on it as in BI 7.0 many components require portal - Integrated planning, web reports, Admin cockpit, etc.
Bye
Dinesh

Landscape for NWDI

Similar Messages

Maybe you are looking for