Landscape for Solution manager
Hi Experts,
I want to know landscape for solution manager. Is solution manager same as ERP. (3 landscape)
Regards,
Gaito
Hi Gaito,
If your question is : "How many systems does a SolMan system landscape have ?" the answer depends on what functionnality you want to implement :
- for the CRM based scenarii the recommandation is to use a two system system landscape
- for the other ones, you can use a single system system landscape
Hope this will help.
Regards,
Stéphane.
Similar Messages
-
Recommended landscape for Solution Manager
Hello Evereybody,
We are planning to use almost all the Fuctionalities from SOLMAN like Change management,Operation Management,System Monitoring etc,
We are planning to go with SOLMAN DEV,QUALITY,PROD.
Could you please Add your comment in having 3 Solman systems in one Landscape?And how to manage?
Kindly provide me the list of clients who had Implemented 3 systems for Solman and howare they optimally using those 3 systems?
Thanks in Advance!!!!!!!
Pradeep.Hi
For landscape you can check the FAQ section on Service Marketplace ->solution Manager under application lifecycle management
https://websmp207.sap-ag.de/support
To run SAP Solution Manager for minimal operations (i.e. Maintenance Optimizer, EarlyWatchAlert) a one-system landscape is sufficient. For mission-critical operations (Change Request Management, System Monitoring) the SAP Solution Manager is best run on a 3-system landscape (DEV, QAS, PROD).
Hope it helps.
Regards
Prakhar -
Hi, All:
My question is about the Solution Manager's Landscape. Normally, do we need 3-tier (DEV-QAS-PRD) landscape for Solution Manager implementation or only 1 Solution Manager to be installed is ok?
Any info will be highly appreciated!
Thanks!
Best Regards,
DavidHi David,
Thank you for the reward points.
Regarding the landscape - Have not come across any document of that sort. People suggest based on experience.
Sizing for solution manager - You can get the document from the below link in service market place.
<a>https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000009816&_HIER_KEY=601100035870000192213&_HIER_KEY=701100035871000457214&_OBJECT=011000358700000255562007E&_SCENARIO=01100035870000000202&</a>
best regds,
Alagammai. -
Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh -
Process for applying for Solution Manager Key?
I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager keyBalaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch -
New Features Planned for Solution Manager 4.0
hello friends
can can one tell me the new features that are there in solution manager 4.0 as our organisation is planning for solution manager 4.0
regards
neha shahhi neha
The upcoming release will focus on three major aspects:
Enhanced support of key customer support processes:
The SAP Solution Manager 4.0 release will offer functionality to assist you with your major application management tasks.
For example, it will allow you to implement support packages and SAP notes end-to-end. SAP Solution Manager 4.0 will provide functionality to automatically identify relevant patches, and document and manage their implementation, testing, and import to your production systems.
Continuous improvement services:
The SAP Solution Manager has detailed information about your solution, such as key business processes and the SAP system landscapes. If your SAP competence center selects the new continuous improvement service offering, a designated SAP contact will be named and will actively work with you on a regular basis to solve your business critical SAP issues.
Technical integration of Solution Manager Diagnostics into the SAP Solution Manager platform. Solution Manager Diagnostics provides all functionality to centrally analyze and monitor a complete NetWeaver system landscape.
regards
Janak Mehta -
EHP2 for Solution Manager Enterprise Edition
Hi
Can anyone please list the main features delivered by EHP2 for Solution Manager Enterprise Edition or point me to where I can find these? And if you only have one Solution Manager system for your landscape can someone confirm if EHP2 will be activated automatically? Will any new functionality still be delivered in the support packs in between the enhancement packages?
Many thanks in advance
Peter>
Peter O'Leary wrote:
> Can anyone please list the main features delivered by EHP2 for Solution Manager Enterprise Edition or point me to where I can find these? And if you only have one Solution Manager system for your landscape can someone confirm if EHP2 will be activated automatically? Will any new functionality still be delivered in the support packs in between the enhancement packages?
Hi Peter,
Availability dates for a potential EhP2 for SolMan are not yet communicated.
Activation would be similar to update to EhP1. It's not automatically.
Best regards,
Ruediger -
What are installations material for Solution Manager 7.0 EHP 1
hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis -
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
Is it feasible to create odataservice for Solution manager using UI5 technology?
Hi Experts,
Is it possible to create new odata service for solution manager, such as Viewing BPML(Business process master list).
If yes, kindly share the steps/way to achieve.
Regards,
Asmita RanadeJulie,
same answer here which you already got in the two threads you opened on the MOS communities: No, not really since you want to do it in Answers. It *would* be possible in the RPD, but quite pointless to instantiate an RPD variable just to instantiate some literal code. -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
BI content for Solution Manager 4.0
Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider. -
Third-party tools for solution manager
Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
TimHi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji -
Client Copy for Solution Manager
Hello!
I need to know for the client copy phase , which clients do I need to copy from , for Solution manager 40 SR3.
RegardsABAP
- SCC4: create a new client
- SCCL: copy client 000 with profile SAP_ALL to new client
- SCCL: copy client 001 with profile SAP_USER to new client
- PFCG: generate the profile for SAPJSF
JAVA
- Change the ABAP Client for UME with config tool
... reboot your server -
Wily Introscope Version for Solution Manager 7 SPS 17
Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.
Maybe you are looking for
-
Have had no luck with PCs trying to do music recoding so I swithced over to Mac because I heard it so easy, seamless, and problem free. Now, on opening Garageband for the first time and trying to preview loops I get an error mesage that says: "the so
-
LOV not being applied to a column
Problem: The first query runs quite fast as it is soft parsed, but the LOV values are not applied to the resulting values in the column CHECK_MARK. The second query is hard parsed (and slow due to that) but has its LOV value properly realized. The LO
-
IMac No Longer Reads DVD+R
Hi all. My iMac G4 use to be able to read/write DVD+R but suddenly cannot? The discs previously burnt do not show on the desktop when inserted and I've tried looking for the disc through openining windows etc. I've checked all preferences etc. and al
-
Dynamic Query Mapping using Toplink Entity
Hi, We have a requirement that the column names of the table dynamically gets changed for different customers. eg; Client 1 , will have Select EMP_ID, EMP_NAME from EMPLOYEE Client 2 will have SELECT CEMP_ID, EMP_NAME, CEMP_ADDR from EMPLOYEE Is it p
-
Hi I am wondering if it is legal to rip music off of a friend's ipod. An example: Using ipod rip to transfer his music to my itunes library for personal use. Thanks for any help!