Landscape in RTF template does not work

Hi,
I try to generate an XLS (Excel) document from a RTF template built with Word and the BIP Desktop tool.
Before saving the RTF template, I go in page setup and set the layout to "landscape".
When I generate the final document, and open it in Excel, if I go to preview the document is in portrait mode, not landscape.
How can I do to have the landscape mode ?
thanks.

Development has previously confirmed that Page Orientation is not supported for Excel output (ref. bug 8435974). There's an open ER / bug 9818198 which you may want to track via My Oracle Support.

Similar Messages

  • Page Break In XML Publisher RTF Templates Are Not Working

    Please refer to the Metalink Doc below:
    Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
    Doc ID:      559111.1      
    Type:      PROBLEM
    Modified Date:      24-MAR-2008      
    Status:      MODERATED
    In this Document
    Symptoms
    Cause
    Solution
    References
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle XML Publisher - Version: 5.6.3
    This problem can occur on any platform.
    Symptoms
    Using XML Publisher version 5.6.3 in 11.5.10.
    Find <?split-by-page-break:?> syntax is ignored.
    EXPECTED BEHAVIOR
    Expect page breaks to occur at point set by "split-by-page-break:" code.
    STEPS
    The issue can be reproduced at will with the following steps:
    1. Create a template.
    2. Call split-by-page-break: inside a loop.
    3. Output is not formatted correctly, page break call is ignored,
    Cause
    Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
    Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
    Fix is in ScalableStringList.java version 115.4.
    This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
    Solution
    To implement the solution, please execute the following steps:
    1. Apply Patch 6165466 when it is released.
    2. Test your report.
    References
    Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
    Keywords
    XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
    Help us improve our service. Please email us your comments for this document. .

    Hi JDev,
    Check this out:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
    Hope this might help.
    Thanks

  • Importing element definition from an  EDD into a template - does not work

    FM 10.0.1 German on Windows XP SP3.
    When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a  new EDD.
    So the element definitions which are correctly defined do not appear in the template.
    The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
    In FM9 this was no issue.
    Any help is appreciated, I have a deadline and must do some changes in the EDD.
    Best Regards
    Thomas

    Lynne,
    EDD is english (Version FM7.0), Interface language is German.
    Maybe it´s a localization issue.
    I have attached a captivate demo pdf so you can see what happens and the
    defective EDD.
    Mit freundlichen Grüßen
    Best Regards
    Thomas Zeisig
    From:   Lynne Price <[email protected]>
    To:     "Th. Zeisig" <[email protected]>
    Date:   13.10.2011 14:12
    Subject:        Importing element definition from
    an  EDD into a template - does not work
    Re: Importing element definition from an EDD into a template - does not
    work
    created by Lynne Price in FrameMaker Structured - View the full discussion
    Thomas,
      No question the behavior you describe is a bug. However, I am unable to
    duplicate it. I created an EDD with two element definitions:
    Element (Container): doc
      Valid as the highest-level element.
      General rule:  (
      When I imported element definitions from this EDD into a new portrait
    document, FM reports that element a is referenced but not defined and that
    b is defined but not referenced. However, with all elements listed, the
    element catalog shows a, b, and doc. The metatemplate elements are not
    available.
      I wonder if this is a language-dependent problem. Is your EDD German or
    English? What about your user interface?
      Can you send me a short EDD that fails as you've described?
      Thanks,
          --Lynne
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3969067#3969067]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in FrameMaker Structured by email or at Adobe
    Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • SQL Developer 2.1.1.64 - code template does not work in Windows Vista

    I have been trying to import a code template in SQL Developer 2.1.1.64 / Windows Vista using the following steps:
    1. Import template (xml) file using "Preferences > Database > SQL Formatter > Import..." option. Pressed "OK" button.
    2. Clicked on "Preferences > Database > SQL Formatter > Oracle Formatting".
    I expected to see the new profile under "Profile" drop-down-list-box, but it does not appear there.
    I tried putting the template (xml) file under various locations, including:
    (a) C:\Users\<user_name>\
    (b) C:\Users\<user_name>\AppData\Roaming\SQL Developer\
    Please let me know any suggestions that you may have.
    Thanks in advance.

    I got it to work. In step 1 that I mentioned, "OK" button should not be pressed; go to step 2 without pressing "OK" button.

  • RTF template does not format properly when run from Concurent Manager

    Hi
    I have complex RTF template; many stuff in are in header in word table format,body section again fields are in table format and Footer again in word table format.
    When I run BI Publisher report as concurrent request half the content like header and footer are not displayed. I can see copmlete report when I preview using XML data in word. Is there any limitaions that certan fonts, word format features not supported in RTP template. What is the best way to put header, body and footen in main body area rather using Header and Footer features of word?
    Thanks and regards

    You can use the start:body etc syntax to move your header/footer into the main part of the document. This way you can use form fields.
    Regards,
    Gareth

  • My RTF template is not working.

    After a day i got my first report printed from PDF.
    But in RTF, i am not getting the output.
    my RTF definition looks like:
    SALESMAN LISTING
    CODE     SALESMAN
    <?for-each:SM_CODE?>
    <?SM_CODE?>     <?SM_NAME?>
    <?end for-each?>
    and my sample XML file is a simple one like:
    <?xml version="1.0" encoding="UTF-8"?>
    <ROWSET>
         <ROW>
              <SM_CODE>E00</SM_CODE>
              <SM_NAME>UCF AJM</SM_NAME>
         </ROW>
         <ROW>
              <SM_CODE>E01</SM_CODE>
              <SM_NAME>H/O SALES AJM</SM_NAME>
         </ROW>
    Can anybody help me??
    Thnx in advance

    Hi Raveesh,
    u try like this
    <?for-each-group:current-group(); SM_CODE?>
    <?for-each:current-group()?>
    <?SM_CODE?> <?SM_NAME?>
    <?end for-each?>
    <?end for-each?>
    for more details u refer XML publisher User Guide for current-group()
    Thanks
    Praveen Gollu.

  • Live-preview of .dwt template does not work

    Hi,
    I set up a html page in DW and converted it to a template using insert > template > convert (make) to template (I use the german version of DW, dont know whether this is the right translation). Now my file has an .dwt ending. After having inserted the {tag_pagecontent} I uploaded the file to the Templates folder of BC. Now I am working on the template, but live preview doesn't work. It says:
    The path is: mywebsite.business-catalyst.com/Templates/mainDesktop.dwt
    How can I use the live preview when working on a template?
    Regards, Citzwerth

    Hi Peter,
    Please copy/paste the problematic slide in a new responsive project and verify if the issue still exists in preview?
    If yes, can you please upload the new project to dropbox.com and email me the download link?
    Regards,
    Hari

  • 8500 landscape mode in Photoshop does not work

    In photoshop, when I print in landscape mode, it only prints in portrait. I have changed all the settings in the printer preferences and the preview always stays in portrait. I just used the same photoshop image in my old 7300 printer and it works just fine on another computer. The only way I was able to do it  OK was to save in pdf and then print "automatically" to fit.
    Is there any other solution in Photoshop?

    Open as layers only works for Photoshop.
    There is a plugin available Elemental - Integrating Photoshop Elements with Lightroom that will include that functionality for Elements.

  • ORDS Template with parameter does not work

    Hello everybody,
    I can not get working a RESTful Service using the ORDS_SERVICES -API (ORDS version 3.0.0.343.07.58), same Query without parameter (hardcoded product_id) works fine.
    declare
    l_module_id number;
    l_template_id number;
    l_handler_id  number;
    l_parameter_id number;
    begin
    ORDS_SERVICES.delete_module(p_name => 'test_parameter');
    l_module_id := ORDS_SERVICES.create_module(p_name => 'test_parameter',
                                p_uri_prefix => '/test_parameter',
                                p_items_per_page => 10,
                                p_status => 'PUBLISHED',
                                p_comments => null);
    l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                               p_uri_template => '/demo_product_info_10/',
                               p_priority => 0,
                               p_etag_type => 'HASH',
                               p_etag_query => null,
                               p_comments => null);
    l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                               p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
             p_source => 'select mimetype, product_image from demo_product_info where product_id = 2',
             p_format => 'DEFAULT',
             p_method => 'GET',
             p_items_per_page => null,
             p_mimes_allowed => null,
             p_comments => null);
    /* now same result but with parameter */
    l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                               p_uri_template => '/demo_product_info/{product_id}',
                               p_priority => 0,
                               p_etag_type => 'HASH',
                               p_etag_query => null,
                               p_comments => null);
    l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                               p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
             p_source => 'select mimetype, product_image from demo_product_info where product_id = :product_id',
             p_format => 'DEFAULT',
             p_method => 'GET',
             p_items_per_page => null,
             p_mimes_allowed => null,
             p_comments => null);
    l_parameter_id := ORDS_SERVICES.add_parameter(p_handler_id => l_handler_id,
                               p_name =>  'product_id',
             p_bind_variable_name => 'product_id',
             p_source_type => 'URI',
             p_param_type => 'INT',
             p_access_method => 'IN',
             p_comments => null);
    commit;
    end;
    The first template works fine:
    http://localhost:8080/ords/xxx/test_parameter/demo_product_info_10/
    shows a jpeg image of a wallet.
    The second template does not work:
    http://localhost:8080/ords/xxx/test_parameter/demo_product_info/10/
    fails with error:
    mapped request using: BasePathMapper [basePath=/xxx/] to: SCHEMA:apex|XXX
    Choosing: oracle.dbtools.http.dispatch.DispatchMetaData as current candidate with score: MetaDataScore [score=0, matchedMethod=  GET: {10299, false}
      common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
    , matchedPattern= /test_parameter/demo_product_info/{product_id}
    common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=null, pagination=null, requiresPrivilege=null, transport=null]
    methods:
      GET: {10299, false}
      common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
    stack trace:
    oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: INT
    at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
    at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
    at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
    at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
    at oracle.dbtools.http.cors.CORSFilter.doFilter(CORSFilter.java:35)
    at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
    I changed the add_parameter-call p_param_type => 'INT' to be  p_param_type => 'STRING'
    then error remains the same and strack trace says
    oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: STRING
    at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
    at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
    Could you please confirm and fix,
    kind regards,
    Tom

    This is a guess, but I suspect that ords_services.add_parameter() is not required at all.
    Also, your URL /demo_product_info/10/ should not have the trailing slash (according to your template URI).
    For more information, I suggest you look here:
    ords.3.0.0.343.07.58.zip\ords.war\scripts\migrate\core\ords_migrate.plb
    The migration package will show what is usually done for templates that already exist within APEX 4.2. I checked my templates and the ones with URI variables {in-curly-brackets} contain no records in apex_040200.wwv_flow_rt$parameters.
    -Kris

  • Dynamic image in the template builder plug-in does not work

    Hi all,
    The documentation says:
    Direct Insertion
    Insert the jpg, gif, or png image directly in your template.
    +...This works obviously+
    URL Reference
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{'http://image location'}
    For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
    +...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}+
    Element Reference from XML File
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{IMAGE_LOCATION}
    where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
    +...This, however, does not work.+
    I use Apex' report query tool and My query is like
    select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
    the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
    But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
    I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
    Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
    Regards
    PS: My BI version: 10.1.3.4.1
    Edited by: oeren on Jun 8, 2011 12:28 AM

    Oeren,
    I stumbled across this little tidbit buried in the BI Publisher forum: Dynamic Images in rtf
    Glad you are up and running!
    Joshua

  • Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

    Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
    If I'm in the wrong place, please do warn me.
    The documentation says:
    Direct Insertion
    Insert the jpg, gif, or png image directly in your template.
    ...This works obviously
    URL Reference
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{'http://image location'}
    For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
    ...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
    Element Reference from XML File
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{IMAGE_LOCATION}
    where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
    ...This, however, does not work.
    I use Apex' report query tool and My query is like
    select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
    the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
    But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
    I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
    Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
    Regards
    PS: My BI version: 10.1.3.4.1

    Hi Oeren,
    your steps seem basically to be correct. I have a tutorial how to do this here (in german)
    http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
    when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
    referencing seem to be OK.
    Here are two thought - the issue might be one of these ...
    How did you insert the dummy image into the word document - did you do it via "insert" or
    via "link to file". "Link to File" does not work - you must choose the simple "insert".
    Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
    Does this help ..?
    Regards
    -Carsten
    Cloud Computing mit APEX umsetzen. Jetzt!
    http://tinyurl.com/apexcloudde
    SQL und PL/SQL: Tipps, Tricks & Best Practice
    http://sql-plsql-de.blogspot.com

  • The Create List Item workflow action does not work in document library with document template

    My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
    I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
    I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
    document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
    an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
    When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
    I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
    Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

    I had the same problem with corrupted document - this worked for me:
    1. Create a 2010 Workflow which creates the list element in a document library
    (you may start this workflow from your 2013 workflow if applicable)
    2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
    ("Id for indholdstype" is Danish for "Contenttype ID")
    3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
    (I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
    Hope this helps you!

  • Configuration Template Builder WL8.1 does not work

    Hello,
         After spending nearly 2 days now trying to get a Configuration Template
    built, I've concluded this simply does not work. Has anyone used the
    Config Template builder to package a semi-complex application on top of WLI?
         I'm trying to have 2 of my applications, the JMS and JDBC resources,
    and a WLI event generator packaged up for easy deployment to someone
    else's server configuration. The problem with this is that there are
    required resources for WLI, namely a database. The Pointbase database
    included for WLI does not get included in the template automatically.
    There are also some flat-out bugs:
    If you choose to include a resource adapter "application", such as
    jms-xa-adp.rar, the template builder does not bundle this in the
    template and deploy it correctly. The template builder restricts you to
    putting applications in the relative path starting at ./
    For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
    the template builder defaults to put it in ./lib of your template.
    However, when you create a domain with the template, jms-xa-adp.rar does
    not get placed in your ./lib directory. This causes you to then go and
    manually edit your config.xml to point back at $WL_HOME/server/lib or to
    manually copy jms-xa-adp.rar into your ./lib directory (which the
    template mechanism should do for you).
    Relative paths in the config.xml file require you to execute the config
    builder from the directory of the domain you are making a template for.
    The template builder should instead be smart enough to realize that
    relative paths in the config.xml file are relative to the directory that
    the config.xml is in, not the one you are running the template builder
    from. You'll get an error when trying to create the template cause it
    won't find the resources if you're not in that directory.
    If anyone has successfully used this to package a WLI application in a
    template, please share your experiences and how to do so. In the
    meantime, I'm claiming there is no way to nicely package up a server
    configuration for a WLI app in Weblogic, and this is a big shortcoming.
    Weblogic needs a simple transferrable way of creating server
    configurations (it tries to do this with the template, but that is
    failing). With JBoss, for example, you simply copy your server directory
    into another installation. This doesn't work with Weblogic unfortunately
    because it puts hard-coded paths in the config.xml file.
    Thanks

    Russ,
         Thank you for the detailed responses. The only one I'm currently
    struggling with still is the #5, with the scripts between the two. One
    of the major benefits of using a J2EE App Server is supposed to be the
    portability between servers. I find it disconcerting that BEA Weblogic
    restricts me to the platform I created the domain on by creating
    platform-specific startup/shutdown scripts for only the platform created
    on. It's understandable that a script converter would be difficult, but
    at least both the .sh/.cmd files should be created from the first time
    you make a domain. If the user only wants one or the other, they can
    delete the appropriate one. It's also understandable that the
    users/deployers shouldn't have to manually convert a startup/shutdown
    script to take the domain to a different box.
         JBoss clearly has BEA beat on ease of deployment here. Their model is
    the concept I'm thinking of: you have some generic startup/shutdown
    scripts that can load a platform-independent server configuration. You
    truly can copy directories as-is between JBoss installations.
         I was hoping to package up a server domain for use on any of the
    supported platforms, but since I don't have the time to manually convert
    the startup/shutdown scripts, I'm going to have to tell people it's only
    for Solaris now.
         Hopefully BEA can fix this in a future SP. There's no need for this
    platform-dependency. Also, if the Windows version can generate both
    scripts at creation time, then the Solaris should be able to do this as
    well (or at least give you the option).
    Thanks again for the replies
    russ wrote:
    Hi Steven,
    I have several comments and questions about your last two posts. I will try to
    address them in order.
    1) "The Pointbase database included for WLI does not get included in the template
    automatically."
         By default the template builder only includes the *.cmd and *.sh files in the
    template from your domain directory. If you begin building with an existing
    domain template all files that were in the template will get included. This was
    done because there is no way for the builder to automatically determine all the
    files that are required by your template/domain and we steered away from recursively
    including all files from the directory so that unused files were not needlessly
    included. We can extrapolate some files based on the application paths in the
    config.xml, but the rest is left up to the template builder to be aware of what
    is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
    files included in your template just select these files on the ?Add Files? panel
    of the template builder and add them to the ?Domain Directory?.
    2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
    the template builder does not bundle this in the template and deploy it correctly.?
         The template builder considers application files to be in two categories: Imported
    or Internal. When you are at the ?Add Applications? panel of the builder you
    will see a checklist of all the applications that are in the domain you selected.
    On the right hand side there are two text fields. The top one displays the application
    path as it is currently set in the config.xml of that domain. The bottom field
    will be different depending on what category the application falls into. As you
    click on each application in the list, you may notice that the bottom field may
    change from an editable field titled ?Imported Application Path? to a non-editable
    field titled ?Internal Application Path?. The difference between the two categories
    is that an ?Imported? application?s files will be included in the template jar.
    An ?Internal? application?s files will not be included in the template jar because
    they are considered internal to the weblogic installation. The jms-xa-adp.rar
    should fall into the internal category and should not get included in your template.
         From what you are describing it sounds like the builder attempted to import that
    application when it should not have. In an attempt to recreate the problem you
    are seeing I deployed that Connector Module through the WLS console and ended
    up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
    is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
    from this domain, the builder recognizes this as an internal path and does not
    include it inside my template. If the current application path you had looks
    different from the one above, that may explain why the builder was attempting
    to import it. What was the value of the ?Current Application Path? for that application
    deployment?
    3) ?Relative paths in the config.xml file require you to execute the config builder
    from the directory of the domain you are making a template for.?
         The builder is ?smart? enough to determine relative paths. You should not have
    to invoke it from the domain directory you are working with. There is a known
    bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
    cause it to not find files with relative paths in your domain directory if the
    application path in the config.xml is just a ?.?. If this is the case, you should
    see a FileNotFoundException when you attempt to create the template. This will
    be fixed in SP2 and you can work around this problem by changing those paths to
    ?./? instead. If this was not the case, what was the path the wizard choked
    on?
    4) ?Looking through the config file, it seems that it's all of the WLI components
    that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
    an absolute path, not sure if that is WLI or WLS. ?
         BEA_WLS_DBMS_ADK is an integration application. If you created the original
    domain using the configuration wizard most of the applications in an integration
    enabled domain will reference paths inside of you installation directory or ?internal?
    paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
    Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
    where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
    domain into the builder it shows this application as ?internal? and the ?Internal
    Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
    This will be set as the path value of this application in the config.xml that
    will be included in the template you build. When you later use the Configuration
    Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
    of the installation directory of the machine you are creating it on.
         If you were to Change these to relative paths, as Mark previously suggested,
    it will only work if you copy the domain directory to the same location relative
    to your installation directory on the target machine. Also, if you copy the domain
    in this manner you will more than likely run into problems with your start/stop
    scripts and be forced to hand modify all the paths contained within. The configuration
    wizard tries to alleviate these problems and make the configuration entirely portable.
    This gives the user who creates the domain from your template the ability to
    put it anywhere they want regardless of the paths in the config.xml.
    5) ?However, there is another major problem with the Template Builder: it only
    includes the startup/shutdown script for the platform you create the template
    on. ???I built the template on Solaris with the UNIX scripts. However, I tried
    to create a new config on Windows with this template, and the scripts were not
    converted to .bat files!?
         As I stated previously, the builder will only include *.cmd and *.sh scripts
    into your template by default. If you created the domain on a unix platform using
    the configuration wizard it will not extract the *.cmd files since these aren?t
    considered to be useful on unix. If you were then to attempt building a template
    from this domain and take it onto a windows platform, it will obviously be missing
    any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
    because they can still be useful if a user has an MKS or Cygwin type environment
    installed. The config wizard and template builder do not have the ability to convert
    scripts. The builder will only include existing scripts that are in your domain
    directory and automatically determine any necessary string substitutions that
    will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
    versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
    files since these are more commonly associated with Win 95/98/ME.
         I will be happy to answer any more questions you may have and would also like
    to take a look at your domain configuration to try and get a better understanding
    of the problems you are encountering.
    thanx,
    russ

  • Spry tool tip does not work in template or child pages within an editable region. Why not?

    Ok. so I am getting pretty frustrated. I take the time to learn how to use CSS and to create a template page for a Contractor Site (www.ContractorInsurance.net). The idea is to create a page that I can use for different classes of Contractors...right?
    Then I get all happy about being able to insert ToolTip onto pages to help the user. Great!
    LIfe to turn to Sorrow after nearly five hours of searching for a "eeking" answer.
    So what good does it do to have an Editable region to update if we cannot have the flexibility to insert a tool tip on child pages?  Ok so the fast solution is to what... Have a question mark image, insert another apDiv, name it toolTip_Not and provide it with a show=hide behavior?
    RRRRRrrr...
    This really sucks not being able to find a solution within a reasonable amount of time.

    I have tried thank you. However...it is still not working.
    www.ContractorInsurance.net/course_of_construction.php
    The error message is "Making this change would require code that is locked by a template translator"
        Re: Spry tool tip does not work in template or child pages within an editable region. Why not?
        created by altruistic gramps in Spry Framework for Ajax - View the full discussion
    If you have a look at the following simple document with a tooltipTooltip trigger goes here.
    Tooltip content goes here.
    you will notice that a couple of lines have been placed in the HEAD section of the document. When using DW templates, the HEAD section is usually not editable, hence the error mesaage. By default, your template should have an editable region in it just before the closing tag. It looks like this: <!-- TemplateBeginEditable name="head" > <! TemplateEndEditable --> Dreamweaver should be able to find that editable region and insert the
    <script> tag there automatically. Because you don't have an editable region like that in the <head>, open the master template, and paste the code above just before the closing </head>
    tag. Gramps
    Edited to remove personal data

  • Save a published Access services database site as a template with contents does not work

    Hi
    I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
     error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
    For more information about this error navigate to the report server on the local server machine, or enable remote errors
    However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

    Hi cally, check the following links for possible solutions:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
    http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
    cameron rautmann

Maybe you are looking for