Landscape mode doesn't work properly or gets locked

When I try to watch a video or use any other apps that support the landscape mode the phone will not do this when properly trying to get the phone to switch to the landscape mode. When I am in the camera mode it will also lock its self in landscape mode to where I am only able to to take a picture or video in landscape mode. This can be very frustrating especially when trying to watch videos on my phone. Not a very good use of the great image quality when viewing a video in orentation mode. I have the iPhone 6 with the 8.0.2 update but I think this was happening before I updated the phone.

http://www.apple.com/iphone/iphone-3gs/keyboard.html
Try restarting the iPhone and test again.

Similar Messages

I upgraded to the firefox 10 last night and now my aol mail doesn't work properly - i get an error message that it cannot load mail, i have to revert back to an basic version. what should i do to fix this?

this is the error message that i get - ZOIDS!
ERROR 8
C0FE180D Report ID: 10440-mail-20120207-112854
Problem loading application
Uh-oh! Mail’s having trouble loading. Sorry for the delay! Click here to try again.
If mail continues to get hung up, click here to sign into the Basic version. Basic delivers a great mail experience on slower Internet connections, such as dial-up.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Iphone4 doesn´t work properly in 3G mode

My iphone4 doesn´t work properly in 3G mode. Telefon calls break and telefone quality is poor. Internet is mostly not posssible. With 2G both (Telefone, Internet) work. The problem is not that vodafone net is poor because other smartphones work properly at the same location. Telefone calls often break with "no connection" even with 5 sticks. Internet speed is mostly poor, i.E, slower than 2G. It is definitly not a net problem. I think (not sure) the problems occures wit IOs 4.3.3

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Flashing in Windows Modes doesn't work

I'm running Windows Vista Business, and when I try to update my BIOS in windows mode, it fails.
I'm using MSI Live Monitor 3. After finding the bios (1.5), I use "windows mode" to flash.
A command-line window comes up, and I can see everything getting flashed. However, after it's done it reboots automatically. After both the initial splash-scrren and the SATA-screen showing my drives, I get an CMOS checksum failed error, and I can either start fiddleing with the setting themselves, or just use defaults.
I've tried both.
And after both times, after I get back to windows again, Live Monitor 3 says it has an update for me - bios 1.5. So I can only conclude it wasn't installed, somehow.
Before doing the install, I closed ALL programs, except windows itself. (I'm saying this, because Live Monitor 3 wishes me to close it..........)
I cannot flash via a floppy-drive because I don't have one.
Another problem is that DigiCell keeps telling med: "Failed to load driver". I have no idea what it even IS, but I'd just like to see what free software I get. :P
Thirdly, has anyone heard of problems with external USB drives and MSI mobo's? I have a 500gb My Book drive that throws I/O errors in Vista, but not in XP on another PC...
My PC is:
MSI P965 Platinum,
2.13ghz Core 2 Duo,
2048mb DDR2 RAM, 533 Mhz
Regards,
Søren Andersen

Thank you Jack!
It is indeed updated to 1.5 - I just didn't notice, since I had the full-logo thing on.
I also updated the drivers, but unfortunately that didn't help. :-(
I've been trying since friday to fix this both on the WD forum (http://websupport.wdc.com/forum/topic.asp?TOPIC_ID=5948) and on Microsoft's tech forum (http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.vista.hardware_devices&tid=dc8d09ab-0d98-452c-b2d3-a0948f756dda&cat=en_us_9F280F8D-E6BF-F78C-234A-416CF09D5DC5&lang=en&cr=US&sloc=en-us&m=1&p=1)
but we've still been unable to fix it...
To be honest, I don't think it has anything to do with hardware. The drive doesn't work properly on this PC (MSI / Vista) but does on my laptop (Dell / XP), but it has to be checked...
Basically, it keeps throwing 0x8007045D I/O errors, but I can see noone in here has had similar problems.
So, thank you for your extremely swift replies and very great help!
Regards,
Søren

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly. My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

The sync function on my 3rd gen iPod Touch doesn't work properly. It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Microsoft Outlook doesn't work properly since I updated to Mavericks?!

Hello.. so yeah ever since I updated to Mavericks, Outlook from Microsoft Office 2011 doesn's work properly. It won't pop up with a window to either reply, forward or write a new e-mail and it gets annoying because I need it for work. So it's totally useless. I don't want to be deleting and installing MO again because my friend did it for me and I don't know all the registration details to prove it's legit or something and I don't want stuff deleted. Sooo.... can anyone help? I don't know how to get it to work, so frustrating!

What Apple wants from his customers?
1) I've paid my iPhone 4S 900 euros;
2) I'm used to buy music and apps from iTunes store;
3) my iCloud space costs 32 euros per year
and, like me, millions of customers around the world!
and Apple does not allow me (and many others) to use the internet traffic for which I (we) pay my (our) provider, that's not among those that directly sell iPhone??? Is this your idea of a really unblocked device as you falsely declsre from the pages of Apple online store ?!? Shame on you!
If I had know that the 7.1 led to this I'd never updated my iPhone. No one (Apple and the sites that live because of her) told about this issue in their enthusiastic comments on the new, updated version, of iOS. Shame on you!
This would claim a class action against such a behaviour!
I'm disgusted
thank you
Giacomo - ITALY

Stream video doesn't work properly after update to OS Mavericks

after update to OS Mavericks stream video doesn,t work properly!!! doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    http://get.adobe.com/flashplayer/?PID=7105813
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

Safari doesn't work properly

Safari doesn't work properly. See screenshots
0— what version
1 – Scaling doesn't work as it should and as it worked before
2 – inspector became unusefull in some manners and few weeks there is now way but use alternative browser to work
BTW some controls on websites (eg SHOPIFY), based on JS doesnt work properly.
To solve a lot of problems now as never before I use chrome.
That's very very sad.

You coulds always get Google Chrome- Its free!

Landscape mode doesn't work properly or gets locked

Similar Messages

Maybe you are looking for