Landscape pages and portrait pages into the same document ?

Hi everybody,
I have a report to do, and I would like to introduce a graphic into the document.
To do so, I need to switch from a portrait format to a landscape format, and back to a portrait format, to follow the explications.
How to do so?
Thanks in advance
PS: sorry 4 my english I'm not a native speaker.

Ok, thanks a lot.
But what about page numbering?
I could make it .
But, if I rotate the picture through the metrics. I find the page numbering on the right bottom .
But , it should be on the top right and rotated.
do you have any suggestion for this detail.
Have a nice day.

Similar Messages

Pages 09 - Portrait and Lanscape view in the same document?

Is it possible to have landscape and portrait layout in the same document?

Tim,
You're welcome. I don't concern myself much with what Word can or can't do. The issue here is just how to get the job done in Pages with its supporting cast. You may Provide Pages Feedback and if enough voices are heard, you might get your wish. http://www.apple.com/feedback/pages.html
By the way, Preview is a wonderful program, in my mind. The more you use it, the more you will depend on it.
Jerry

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem.

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem. Uninstalled it. Still have the problem with Firefox.
== This happened ==
Every time Firefox opened

How about if you right click on the PDF and select Save Link As..., and then open it locally from within Reader? Does it work ok then? That might be a workaround until the issue within the browser is resolved.
Rob Jaworski
Intl Program Manager

How do i have landscape and portrait slides in the same keynote file?

how do i create landscape and portrait slides in the same keynote file?

You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

Go to detail page and update record at the same time

Hi guys,
I`m very new to dreamweaver and have no coding skills, so
please be gentle.
I`m have created a mail box and it all works fine, the
problem i`m having is that I want to be able to tag wether a
message has been read or not.
So the subject has to be a link so when someone clicks the
subject you are redirected to the read message page and it displays
the message in full.
My question is there a way to go to detail page and update
record at the same time?
I`m using ASP and the mysql read or not field is a SET

"mrmidjam" <[email protected]> wrote in
message
news:fghrpf$7s2$[email protected]..
> Hi guys,
>
> I`m very new to dreamweaver and have no coding skills,
so please be
> gentle.
>
> I`m have created a mail box and it all works fine, the
problem i`m having
> is
> that I want to be able to tag wether a message has been
read or not.
>
> So the subject has to be a link so when someone clicks
the subject you are
> redirected to the read message page and it displays the
message in full.
>
> My question is there a way to go to detail page and
update record at the
> same
> time?
You can use the Update Record ZerverBehavrior and then have
it redirect to
the detailpage.
Joris

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

I have imported my FAVORITES from IE, but don't know how to bookmark a page and move it into the FAVORITES specific folder. in English

After having imported my FAVORITES from IE, how do I bookmark a page and move it into a specific folder?
Since I also use IE, will my FAVORITES still be there?

see analytical information:
[https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks
How do I use bookmarks?]
"Since I also use IE,...... there?" yes it is(if you do not delete it).
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Can I flip pages vertical to horizontal in the same document?

Hi Guys,
Just wanted to know if this was possible... to have several pages in the same document but some in vertical format (8.5 x 11") and others in wide format (11 x 8.5")? Please let me know. Thanks

In InDesign's default state, no.
However, I believe this plug-in is supposed to allow it:
http://indesign.pluginsworld.com/plugins/adobe/1159/dtp-tools/page-control.html

Can Pages display two windows of the same document?

Can Pages display two open windows of the same document? In editing my book and looking for duplications of stories or material, it would be very helpful to see side-by-side windows. Is this possible?

Peggy
They must have misread your:
"Please may I have multiple views of the same document."
as
"Please delete 90 features from Pages and mangle any old documents it opens."
An easy mistake anybody could make.
Peter

Merging more than one address card into the same document

Is there a way to merge more than one address book card into the same Pages document? I am wanting to create a photo directory and I don't want more control over the formatting than Address Book would probably give me. I would like to be able to set up multiple merge fields in a Pages document, and then merge in a whole group of Address book cards and have them populate the merge fields in my pages document with probably about 4-8 address cards represented on each page. Any help you can offer would be appreciated!

I wanted to do the same thing with tickets that had unique numbers on them, so I created a group in my address book and put the numbers in the notes section, then I made my document just a little bigger than my ticket and had the Note field in the ticket where I wanted the number. When I did the mail merge it created the tickets with the numbers, then to print I put 9 pages per sheet and that way I have 9 tickets per sheet and only 20 sheets for 180 tickets.
Worked that way for me, hope it helps!

Figure numbering AND paragraph numbering in the same document

Hi everyone,
I have a document with both figure numbering and paragraph numbering. So let say I am in section 4, then the first paragraph would be "4.1. Introduction" and the first picture would be "Figure 4.1: Cool pics".
I created two different lists, one for the figure and another one for the text so that figure numbers and paragraph number don't conflict. However I cannot add the section number in the figure numbering since it's on the other list... I tried to have the figure numbering and paragraph numbering in the same list, but then the numbers conflict (e.g it gives 4.1 Introduction and Figure 4.2: Cool pics).
Can anyone help me, doing what I want (which is "4.1. Introduction" and "Figure 4.1: Cool pics")? Any help would be appreciated.
Thanks!
ps: I am using Indesign CS5.5 on a pc

Thanks for your answer Jump_Over, but my project is already divided into chapters (themselves divided in sections) in a book.
I found a way around by having the figure numbering in the same list as the paragraph numbering, the twist : while I use level 1 to 4 in paragraph numbering, I use level 5 for figure numbering with a numbering definition like ^1.^#, so no more conflict between numbers.
It's working fine so far...

Greek and latin fonts in the same document?

Hello
May be this is not the right forum for such question, however.
For the moment I'm a student of Greek,( the language), and I just would love to put down words using different alphabets in the same document.
Using the Character Map could be one tedious option.
Two keyboards used intermittently may be one.
The ideal solution would be a keyboard where the individual keys could change function.
I wonder what people in countries having such alphabets (Greek, Kyrrilic etc.) do when they do business with the English-speaking.
Any ideas would be welcome.
T.

In the Windows Control Panel,look in Regional and Language Options > Keyboards and Languges. Click on 'Change Keyboards', which brings up the 'Text Services and Input Languages' dialog.
In the 'General' tab, click on 'Add', to add the language of your choice. The Language Bar is a small control panel that appears on the desktop (you can also dock it in the Windows Taskbar), which allows you to easily switch keyboard layouts. Note, though, that the keyboard shortcuts for the language Bar will steal the ALT key from Photoshop, so it's best not to use them.

Submit page and pass value at the same time

Hi All,
I have a tabular form on EMP table. The SQL query for the form is:
SELECT empno, ename, sal
FROM emp
WHERE deptno = :P0_DEPTNO
On the form, I have three buttons labelled as dept10, dept20 and dept30. I want to achieve the following when I press a button:
1. Submit the page.
2. Value of :P0_DEPTNO is set according to the button pressed.
I am able to achieve only one of the above at a time. How can I achieve both at the same time.
I am using Oracle 10g with Apex 4.0.
Thanks,
Zahid

Actually, it would be cleaner to create a single post submit PL/SQL process as follows:
BEGIN
:P0_DEPTNO := CASE :REQUEST
    WHEN 'dept10' THEN value_for_dept10 button
    WHEN 'dept20' THEN value_for_dept20 button
    WHEN 'dept30' THEN value_for_dept30 button
    END CASE;
END;Or if you want to set P0_DEPTNO to the name of the button, then just
:P0_DEPTNO := :REQUEST;

How do you use RGB And CMKY colours in the same document for print?

I want to create a piece of work with a navy blue back ground and a font on top but don't want to change the colour just the RGB to CMKY mode so the colour looks slightly brighter sitting on top. I have seen this printed out in black and looks amazing but don't know how to create it. Could someone please help?

Sophie,
Your File>Document Color Mode (along with the Edit>Color Settings) determines how the colours are interpreted, more specifically fitting it into the colour gaumt in question. CMYK Color (Mode) had a narrower gamut of less bright colours, RGB has a wider gamut of more vivid colours.
Your Window>Color palette expresses the colours in terms of your chosen combinations of CMYK or RGB (or a few others) values, which are then interpreted by the colour mode.
This means that you can have four combinations: you may insert CMYK values in both CMYK and RGB mode, and you can insert RGB colours in both CMYK and RGB mode.
You will find that most CMYK/RGB values will change once saved, owing to the fundamental differences between the two colour modes.

Edit images of acrobat and paste them into the same position

I have a problem when I want to paste an image edited with photoshop acrobat this is pasted into another position or inverted.
thanks for your help.
Jainor.

Mac: OS Mountain lion
PC: Windows 7
Version: 9 and 10
We perform image editing by right clicking, then edit, then modified it in photoshop and acrobat flight to return to, but change the position or inverted.
I was told that when you edit the default decision of the new sheet created in photoshop and that is why to paste into adobe changes.

Landscape pages and portrait pages into the same document ?

Similar Messages

Maybe you are looking for