Landscape Printing Numbers

I am using Numbers and have set my document to landscape in both the tool bar and the inspector, but it still prints portrait...
I have updated to latest Numbers, ditched prefs file and still can't print in landscape. I have tried two different printers (Samsung and Aficio).... help.
I can export to pdf and do it that way, but it's a bit frustrating.
BTW it all looks fine and appears to be in portrait in print view or preview.
Message was edited by: RosemaryHack

RosemaryHack wrote:
I can export to pdf and do it that way, but it's a bit frustrating.
So printing to pdf works (you get landscape), but printing directly to a printer does not?!?!
BTW it all looks fine and appears to be in portrait in print view or preview.
I don't follow you here. Do you mean that when you have it set to landscape, print preview display landscape, but when you print it comes out in portrait?
To me, this all is very strange since the MacOSX printing architecture essentially is always using PDF (even when printing directly to hardware printer).
Do other applications on your Mac (say, TextEdit.app, for instance) work correctly in this regard?

Similar Messages

How do you print landscape in numbers?

How do you print landscape in numbers?

The discussion above is how you do this in the old Numbers. In the new Numbers 3 you choose the orientation in the Print Preview panel:
On the iPad it looks like this after you tap the Tool (wrench) then Print:
At the bottom of the screen you tap either Portrait or Landscape.
SG

How to print numbers in words

Hello friends,
How can we print numbers in words like
800 as Eight Hundred.
TIA
shekar.

See here for some more solutions in english, french and spanish
Converting a number into world In spanish Language

Stuck on landscape printing...

Hi - I'm a relative newcomer to Mac (but a very happy one) - for some reason I'm defaulting to landscape printing for all of my printers and can't find where to change it - can anyone help please

you could try this. bring up the print dialouge box by printing something but don't click print. you will see option in the drop down menus for landscape in there. Set your preferred choice and in tghe presets drop down menu, save. that may do it. other wise you could go a bit deeper and delete all printing prefs and re-setup your printers

Landscape print

Hi,
We have a requirement to print information in a table manner which requires us to do Landscape prints (as portrait will not hold the information with correct alignment)
We are using default Arial font and just updated the "Orientation" to say "Lanscape" for all relevant sections for the print. We are able to generate the PDF correctly, also when I try generate a metacode file using BARR2VB utility (with printtype XER) it generates fine. But when I view it though Print Analyzer the PMODE still says "Portrait" and the Display at right hand side in the analyzer window also does not look right.
Please suggest If I need any specific setup to get desired Landscape output ?

You should be able to use the F2CON8 (Courier 8 point landscape) font. Are you using one of the old base FXR files that used to contain this font (font ID 12008) or did you add it yourself to your FXR file? In the Metacode font properties, you should see FXCON8 as the 0 degrees font, F9CON8 as the 90 degrees font, F1CON8 as the 180 degrees font, and F2CON8 as the 270 degrees font.
As far as loading fonts on the printer, it would depend on the printer and whether the printer is attached to a network or to a mainframe.
If you have an older model Xerox printer or one that is attached to a mainframe, you may be able to use the XERDNLD utility. It can be used to convert Xerox fonts into a quasi - print stream that when "printed" will download the font onto the printer. You would need to use the same Xerox printer INI settings that you would normally use when producing metacode output to be printed.
If you have a fairly modern printer, it may have a network attached server that runs the printer and holds the Xerox resource files including fonts. If so, then you should be able to use an FTP connection to load the fonts onto the server. You would need to check with Xerox for the location where the Xerox fonts are stored but it might be in a directory like
/opt/XRXnps/resources/lcds/
or
/var/spool/XRXnps/resources/lcds/
Make sure that the font filename (including the .FNT extension) is upper case and note that the directory names are mixed case.
Xerox should be able to provide you with specific information about loading Xerox fonts onto your printer.

Need Landscape printing in Mac OS X

I see from the release notes for 5.2.3 that landscape printing is not currently working. Any idea when this will work again?

pharmastat59 wrote:
Trouble printint to a Dell Laser MFP 1815dn.
Check if the Dell driver is PPC. If it is, and if you installed the first version of Apple's latest Security Update, then that's probably where the issue is, because it broke Rosetta, the software which runs PPC code under SL. Re-install the Sec Update (the problem is fixed in v1.1, which replaced the goofy version on Apple's servers) through Software Update or by downloading it again, then re-install the Dell driver, and try again.
Apple stuff is great, except for their casual disregard of their customers who want to use any product that is not Apple
I'm sorry, but that's non-sense. I'm no fan of Apple, but they're no better and no worse than any large corporation of this type. Mostly, they do things which make business sense as they see it -- which is exactly what you'd want, if you had serious money invested in Apple shares -- wouldn't you?
In this instance, it was up to Dell to release an Intel Mac driver for this printer/scanner, which is, what, 5 or 6 years old? If they didn't, it was probably because they decided it didn't make business sense for them to spend money on developing and testing one. Keep in mind that Dell and Apple and Microsoft and all the rest are in business to make money, not to support every single customer for ever and ever and a day.

Photoshop CS6 Landscape Printing not working. Works fine in CS5.1

When I select Landscape printing, Photoshop CS6 waitis a moment and then goes back to portrait printing. And it will not print landscape. I still have CS5.1 and it works fine. I'm not sure what to do.

Yes, I did update to v13.0.1. It still will only print portrait.
My printer is an HP Photosmart C309a. All other programs landscape printing works. (Microsoft Publisher & Word 2007 for example).
When I click the landscape icon to change the print settings to print landscape--the program just waitis a few moments and then goes back to the selecting the portrait button.

P1505N LANDSCAPE PRINTING

I am using a P1505N with a UNIX software platform...Trying to set the config to landscape mode in the web based settings screen...When I change format to landscape & 60 lines per page, I then OK the configuration, restart the printer & try to print a job. The result is infinite blank pages...any ideas....I used this same format with an HP 1022nw in the past without problems.
Thanks
Barry

No. That's a local printer setting.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Philip Papeman" <plpapeman@remove_comcast.net> wrote
in message
news:e5a831$fuj$[email protected]..
> Hi Folks -
>
> Is there any way to "force" landscape printing, as
opposed to the default
> portrait orientation?
>
> Thanks.
> Phil
>

Landscape print causes images to be

Hi.
I am developing the printing portion of a Java-based medical imaging application. I need to be able to print a sheet containing several medical images (usually, grayscale images), with different layouts.
I am using a code like this to start the print job:
===============================
// Create the Print Job
PrinterJob printJob = PrinterJob.getPrinterJob();
// Create my own Printable Manager (implements the Printable interface)
MyPrintableManager printMan = new MyPrintableManager();
// Set the print attributes for initialization of print dialog
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(OrientationRequested.LANDSCAPE);
aset.add(new Copies(1));
aset.add(PrintQuality.HIGH);
aset.add(new JobName("My Job Name", null));
// Display the print dialog and start printing
if (printJob.printDialog(aset))
try
// Set the Printable interface on the Print Job
printJob.setPrintable(printMan);
// Start the Print Job
printJob.print(aset);
catch (Exception ex)
ex.printStackTrace();
===============================
Then, in the class MyPrintableManager, I implemented my printing code in the print() method:
===============================
public int print(Graphics g, PageFormat pf, int pi) throws PrinterException
// Obtain a Graphics2D object for Java2D functionalities
Graphics2D g2d = (Graphics2D)g;
AffineTransform scaleTranslTransform = AffineTransform.getTranslateInstance(imgXOrigin, imgYOrigin);
scaleTranslTransform.scale(finalScale, finalScale);
BufferedImage bufImgToPrint = ...;
g2d.drawRenderedImage(bufImgToPrint, scaleTranslTransform);
===============================
I am facing the following strange behavior: if I choose the "Portrait" orientation in the Print dialog, everything is printed fine.
On the other hand, when I choose the "Landscape" orientation in the Print dialog, grayscale images are printed "lighter" than what they shall be, as if something had increased the lightness of the grayscale image.
Can you guess the cause for this strange behavior? Can it be a bug of the Java2D Printing API?
Any help would be greatly appreciated.
Regards,
Marco.

Should anyone be interested, I've assembled a self-contained code sample which demonstrates the problem with landscape printing of grayscale images (they get printed lighter than what they should be, while portrait printing looks fine):
I've run the code below on Windows XP, JDK 1.5.0_06, and I am getting the problem with landscape printing: maybe some of you may want to make the test on his own PC and tell what happens...
=====================================
import java.awt.geom.*;
import java.awt.print.*;
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.print.attribute.standard.*;
import javax.print.attribute.*;
public class PrintableManager implements Printable
private BufferedImage imgToPrint = null;
public PrintableManager(BufferedImage img)
imgToPrint = img;
public int print(Graphics g, PageFormat pf, int pi) throws PrinterException
if (pi >= 1)
return Printable.NO_SUCH_PAGE;
// Obtain a Graphics2D object for Java2D functionalities
Graphics2D g2d = (Graphics2D)g;
g2d.setClip(null);
AffineTransform translTransform = AffineTransform.getTranslateInstance(pf.getImageableX(), pf.getImageableY());
// Draw the final image
g2d.drawRenderedImage(imgToPrint, translTransform);
return Printable.PAGE_EXISTS;
public static void main(String[] args)
try
// Substitute the path below with the actual path of the sample image
// file on your hard drive (the used TestImg.jpg can be downloaded
// from 'http://demo.neologica.it/Images/TestImg.jpg')
File imgFile = new File("C:\\TestImg.jpg");
BufferedImage imgToPrint = ImageIO.read(imgFile);
// Create the Print Job
PrinterJob printJob = PrinterJob.getPrinterJob();
// Create the Printable Manager
PrintableManager printMan = new PrintableManager(imgToPrint);
// Set the print attributes for initialization of print dialog
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
// The following line is the crucial one:
// If I specify OrientationRequested.LANDSCAPE, then the image is printed
// LIGHTER (i.e., with a higher lightness) than what it should be.
// If I specify OrientationRequested.PORTRAIT, then the image is printed
// fine (i.e., with the correct lightness)
aset.add(OrientationRequested.LANDSCAPE);
// Display the print dialog and start printing
if (printJob.printDialog(aset))
// Set the Printable interface on the Print Job
printJob.setPrintable(printMan);
// Start the Print Job
printJob.print(aset);
catch (Exception ex)
ex.printStackTrace();
=====================================
Thank you,
Marco.

Is there any built in function that prints numbers in words inXMLP

Hi Team,
This is regarding SR#3-7005716301 from Syntel Limited.
Customer is asking Is there any built in function that prints numbers in words in an rtf teamplate using xml publisher?
For example if the net amount is 100 dollars then it should print "ONE HUNDRED DOLLARS AND ZERO CENTS ONLY"
Thanks in advance!
Leo

I do not know of any function available that lets you print the currency words (dollars, cents etc). Here is a link to a blog post that will allow you to print numbers in words.
https://blogs.oracle.com/xmlpublisher/entry/numbers_to_words_update
Thanks,
Bipuser

Need help to print numbers

CAN SOMEONE HELP ME TO WRITE A JAVA CODE Please
//WHAT I AM TRYING TO DO HERE IS TO PRINT NUMBERS LIKE THIS EXAMPLE:
1 2 3 4 5 6 7 8 9 10
2 4 6 8 10 12 14 16 18 20
3 6 9 12 15 18 21 24 27 30
There is a code to print first line (1 2 3 4 5 6 7 8 9 10)
import becker.util.Utilities;
public class Main
public static void main(String[] args)
{      for (int b = 1; b <= 10; b+=1)
     { System.out.printf(" "+ b);
     Utilities.sleep(30);
Thanks

here you go this should do the trick
import java.*;
import javax.swing.*;
public class Count {
     public static void main(String args [])
          Count c = new Count();
          c.Countpart();
     public void Countpart()
          for(int b=1;b<11;b++)
               System.out.print(b);
          System.out.print("\n");
          for(int d=2;d<22;)
               System.out.print(d);
               d= d+2;
          System.out.print("\n");
          for(int f=3;f<33;)
               System.out.print(f);
               f=f+3;
}hwrd

Can't get Landscape printing aligned correctly...

I'm new to Java and this forum, so any help with the following would be greatly appreciated:
Description: Incorrect height alignment when printing Landscape.
Hardware: Power Macintosh 8500/120, 48MB RAM.
Brother HL-1650 Laser Printer, 8MB RAM.
Software: Mac OS 8.6.
MRJ2.2 (JDK1.1.8), MRJSDK2.2, JFC/Swing1.1.1.
Procedure: 1) Compile BorderDemo.java (see source code below) with javac.
2) Run BorderDemo with JBindery.
3) Select "Landscape" printing, then select "Print".
Results: Incorrect alignment of GridLayout within BorderLayout's Center position.
The first printed row is incorrect. It is split with 6/8ths in row1, and 2/8ths
in the last row.
Expected: The BorderLayout's Center position should print 6 rows and 7 columns of
8 x 1 TextEdit field items (This is supposed to be a calendar). It should fill
the 8.5 x 11 piece of paper in Landscape print mode.
Note: It correctly displays on the computer monitor.
I've tried lots of combinations of GridLayout, BorderLayout, and BoxLayout, but
I can't get it to print correctly in Landscape. Any help would be greatly appreciated!
Compile and run the following code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BorderDemo {
static JFrame frame1 = new JFrame( "BorderDemo");
static JPanel panel1 = new JPanel();
static JPanel panel2 = new JPanel();
static Label R0_1L1, R0_1L2, R0_1L3, R0_1L4, R0_1L5, R0_1L6, R0_1L7,
R0_2L1, R0_2L2, R0_2L3, R0_2L4, R0_2L5, R0_2L6, R0_2L7;
static DayPane R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7,
R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7,
R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7,
R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7,
R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7,
R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7;
public static void setupframe1() {
// Setup and fill frame1.
frame1.setSize( 760, 590);
frame1.setVisible( true);
frame1.getContentPane().setLayout( new BorderLayout() );
// Setup and fill panel1.
panel1.setLayout( new GridLayout( 2, 7, 0, 0) );
panel1.setPreferredSize( new Dimension( 730, 24) ); // bind this height
panel1.setFont( new Font( "Times", Font.PLAIN, 10) );
panel1.setBackground( Color.white);
R0_1L1 = new Label( "CurrentMonth");
R0_1L2 = new Label( "CurrentYear");
R0_1L3 = new Label( "");
R0_1L4 = new Label( "");
R0_1L5 = new Label( "");
R0_1L6 = new Label( "");
R0_1L7 = new Label( "");
R0_2L1 = new Label( "Sunday", Label.CENTER);
R0_2L2 = new Label( "Monday", Label.CENTER);
R0_2L3 = new Label( "Tuesday", Label.CENTER);
R0_2L4 = new Label( "Wednesday", Label.CENTER);
R0_2L5 = new Label( "Thursday", Label.CENTER);
R0_2L6 = new Label( "Friday", Label.CENTER);
R0_2L7 = new Label( "Saturday", Label.CENTER);
panel1.add( R0_1L1);
panel1.add( R0_1L2);
panel1.add( R0_1L3);
panel1.add( R0_1L4);
panel1.add( R0_1L5);
panel1.add( R0_1L6);
panel1.add( R0_1L7);
panel1.add( R0_2L1);
panel1.add( R0_2L2);
panel1.add( R0_2L3);
panel1.add( R0_2L4);
panel1.add( R0_2L5);
panel1.add( R0_2L6);
panel1.add( R0_2L7);
// Setup and fill panel2.
panel2.setLayout( new GridLayout( 6, 7, 0, 0) );
panel2.setPreferredSize( new Dimension( 690, 544) ); // height not bound
panel2.setBackground( Color.black);
R1C1 = new DayPane( );
R1C2 = new DayPane( );
R1C3 = new DayPane( );
R1C4 = new DayPane( );
R1C5 = new DayPane( );
R1C6 = new DayPane( );
R1C7 = new DayPane( );
R2C1 = new DayPane( );
R2C2 = new DayPane( );
R2C3 = new DayPane( );
R2C4 = new DayPane( );
R2C5 = new DayPane( );
R2C6 = new DayPane( );
R2C7 = new DayPane( );
R3C1 = new DayPane( );
R3C2 = new DayPane( );
R3C3 = new DayPane( );
R3C4 = new DayPane( );
R3C5 = new DayPane( );
R3C6 = new DayPane( );
R3C7 = new DayPane( );
R4C1 = new DayPane( );
R4C2 = new DayPane( );
R4C3 = new DayPane( );
R4C4 = new DayPane( );
R4C5 = new DayPane( );
R4C6 = new DayPane( );
R4C7 = new DayPane( );
R5C1 = new DayPane( );
R5C2 = new DayPane( );
R5C3 = new DayPane( );
R5C4 = new DayPane( );
R5C5 = new DayPane( );
R5C6 = new DayPane( );
R5C7 = new DayPane( );
R6C1 = new DayPane( );
R6C2 = new DayPane( );
R6C3 = new DayPane( );
R6C4 = new DayPane( );
R6C5 = new DayPane( );
R6C6 = new DayPane( );
R6C7 = new DayPane( );
panel2.add( R1C1);
panel2.add( R1C2);
panel2.add( R1C3);
panel2.add( R1C4);
panel2.add( R1C5);
panel2.add( R1C6);
panel2.add( R1C7);
panel2.add( R2C1);
panel2.add( R2C2);
panel2.add( R2C3);
panel2.add( R2C4);
panel2.add( R2C5);
panel2.add( R2C6);
panel2.add( R2C7);
panel2.add( R3C1);
panel2.add( R3C2);
panel2.add( R3C3);
panel2.add( R3C4);
panel2.add( R3C5);
panel2.add( R3C6);
panel2.add( R3C7);
panel2.add( R4C1);
panel2.add( R4C2);
panel2.add( R4C3);
panel2.add( R4C4);
panel2.add( R4C5);
panel2.add( R4C6);
panel2.add( R4C7);
panel2.add( R5C1);
panel2.add( R5C2);
panel2.add( R5C3);
panel2.add( R5C4);
panel2.add( R5C5);
panel2.add( R5C6);
panel2.add( R5C7);
panel2.add( R6C1);
panel2.add( R6C2);
panel2.add( R6C3);
panel2.add( R6C4);
panel2.add( R6C5);
panel2.add( R6C6);
panel2.add( R6C7);
WindowListener l = new WindowAdapter() {
public void windowClosing( WindowEvent e) {
System.exit( 0);
frame1.addWindowListener( l);
public static void main( String[] args) throws Exception {
setupframe1();
Container f1 = frame1.getContentPane();
f1.add( "North", panel1 ); // bind height
f1.add( "Center", panel2 ); // no binding
frame1.show();
Thread.sleep( 5000);
frame1.repaint();
Thread.sleep( 5000);
PrintJob pjob = frame1.getToolkit().getPrintJob( frame1, "Printing BorderDemo", null );
if( pjob != null) {
Graphics pg = pjob.getGraphics();
if( pg != null) {
frame1.printAll( pg);
pg.dispose(); // flush page
pjob.end();
class DayPane extends JPanel implements ActionListener, FocusListener {
JTextField tfield1, tfield2, tfield3, tfield4, tfield5, tfield6, tfield7, tfield8;
DayPane( ) {
setLayout( new GridLayout( 8, 1, 0, 0) );
tfield1 = new JTextField( );
tfield2 = new JTextField( );
tfield3 = new JTextField( );
tfield4 = new JTextField( );
tfield5 = new JTextField( );
tfield6 = new JTextField( );
tfield7 = new JTextField( );
tfield8 = new JTextField( );
add( tfield1);
add( tfield2);
add( tfield3);
add( tfield4);
add( tfield5);
add( tfield6);
add( tfield7);
add( tfield8);
public void actionPerformed( ActionEvent evt) {
if ( evt.getSource() instanceof JTextField)
; //removethis.
// frame.update( this);
public void focusLost( FocusEvent evt) {
; //removethis.
// frame.update( this);
public void focusGained( FocusEvent evt) { }

Force the landscape.
Check it out:
pf.setOrientation(PageFormat.LANDSCAPE);
{pf ~ PageFormat}
B@ron {EU.BELGIUM}

My computer defaults to landscape printing

Each time I try to print, my computer wants to default to the landscape printing. I, for the life of me, cannot figure out how to change that setting...among a couple others. Can somone help me out and let me know how you change default printer setting on my MacBook Pro?
Thank you!!!!
Mike

shamelessly lifted from another post:
https://discussions.apple.com/thread/2700380?start=0&tstart=0
-----------< snip >-----------
To change the default Print orientation for Safari (and Preview, Mail, ...)
1) start TextEdit, or another Apple app that has a "page setup" dialog in the "File" menu
2) pull down the "File" menu, and open the "page setup" dialog box
3) change "Orientation" to the one you want as default, example: "portrait"
4) select "Save as default" in the above "Settings" pop-up menu
5) select "any printer" in the "Format For" pop-up menu (of course, if you want make the change for all your printers)
6) click OK and quit TextEdit
7) quit (if not done yet) and restart the other Apple apps (Safari, Preview ....)
The default orientation should have changed into the one you have selected and "saved as default" in the TextEdit dialog.
This has properly worked for me. Good luck.
-----------< end >-----------
and it worked for me!

Landscape printing with HP

new MBP with leopard (10.5.4)
HP LaserJet 1300 on USB
installed HP printer drivers via Software Update a few days ago
I am unable to print landscape pages in any program (Office 2008 2004, Pages, Numbers).
Looks fine in print preview, but when printed the text is not rotated on the page and is cut off.
Even if I print to pdf and then print from Preview.app.
The only thing that works is print to pdf and then print from Adobe Reader 8.
Same thing on an HP 4300 networked printer.

This update may address issues with your printer:
http://www.apple.com/support/downloads/hpprinterdriver11.html
If it seemed to create more issues, then I'd contact HP and let them know it did.

Report - Landscape print

Hi friend,
I am using Oracle reports 6.0.
I want to print a report(character mode) in Landscape using A4 size paper.
Advance Thanks.
null

Hi Jonathan,
I installed the new patch as you suggested, but still I'm not getting the reults I want when I print the rtf file.
Can I just clarify again what's happening.
Main report is landscape in the crystal designer.
Into one of the group sections I insert a subreport. Within the group section where the sub report is, I change the paging to portrait. I also choose the new page before. When I run this in Crystal it views fine and prints fine.
After I export the report to Word in Crystal reports and save it to disk. The Word file looks ok. I.e first page landscape second page portrait. When I print it, it prints both as landscape.
Why are some of the page/print setting lost when it's exported.
If you want me to post on the other forum can you please outline the link
Thanks

Landscape Printing Numbers

Similar Messages

Maybe you are looking for