Landscape Problems with Crystal Reports 2008 SP3

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290).  After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape.  They are loaded into a third party application that uses a Crystal Reports reviewer. 
For some printers, the reports will reset to the 11x17 page size in portrait.  For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option.  None of this helped.
I backed out FP3.3 and that did not help.  After I backed out SP3, the problem went away.  It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP?  I would like to see this fixed in a future patch.

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290).  After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape.  They are loaded into a third party application that uses a Crystal Reports reviewer. 
For some printers, the reports will reset to the 11x17 page size in portrait.  For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option.  None of this helped.
I backed out FP3.3 and that did not help.  After I backed out SP3, the problem went away.  It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP?  I would like to see this fixed in a future patch.

Similar Messages

  • Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

    Hello,
    My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports.  As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
    The issue is that the runtime engine incorrectly returns the report selection formula.  I have included sample code showing what I mean.
    To reproduce;
    1. Create a simple report that has a date range filter like: 
      ({Orders.Order_Date} >= {?START_DATE})  
      AND ({Orders.Order_Date} <= {?END_DATE})
    2. Create a test app as follow that loads a report using the following code:
    ReportDocument rpt = null;
    try
      rpt = new ReportDocument();
      rpt.Load("TestReport.rpt");
      this.txtMessage.Text = string.Format(
        "ReportSelectionFormula:{0}{1}",
         Environment.NewLine,
      rpt.RecordSelectionFormula);
    catch (Exception ex)     
      this.txtMessage.Text = ex.ToString();     
    3.  Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
    4.  Execute the app.
    At this stage, the screen shows
    ReportSelectionFormula:
    (   (  NOT  {Orders.Order_Date} >= {?START_DATE}  )   AND   (  NOT  {Orders.Order_Date} <= {?END_DATE}  )   ) 
    The expected value is:
    ReportSelectionFormula:
    (   (  {Orders.Order_Date} >= {?START_DATE}  )   AND   (  {Orders.Order_Date} <= {?END_DATE}  )   ) 
    If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected. 
    Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack?  Is there a Fix Pack expected to be released soon?  It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
    Thank you.
    -Carlos.

    Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

  • Crystal Report 2008 SP3 and BO XI 3.1 conflict

    Hi every body,
    We have a BOE system:
    BO XI 3.1
    Oracle db 10g
    All running successful and can create some types of WebI report.
    But we also want reports with Crystal Report.
    1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
    2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
    3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
    We set rights for Oracle DB user again. But still error: cannot fetching.
    4> We searched the solution for this problem on the internet. But not worked, no answer.
    Can somebody help me bring back the BOE system state again ? pls   :"<
    T______T

    Hi Paul,
    I hope I read your question right!
    Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
    Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
    Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
    Regards
    Rim Geurts

  • Crystal report 2008 SP3 Ver 12.3.1.684  application crash on runtime

    hi all ...
    i have problem running my report using crystal crystal report 2008 SP3 Ver 12.3.1.684 .. it stop responding while i click preview the report ... and my report is connect to ODBC database source provider..  the crystal report will crash while connect using ODBC(RDO) but other than that all work fine ...
    here is the error log while try run the report ..thx and pls help as i am no idea for this .. and this report is come one of my SOLOMON SL 2011 while i want to edit my existing crystal report
    Description:
      Stopped working
    Problem signature:
      Problem Event Name:     APPCRASH
      Application Name:     crw32.exe
      Application Version:     12.3.1.684
      Application Timestamp:     4c3ddcf1
      Fault Module Name:     ntdll.dll
      Fault Module Version:     6.1.7601.17514
      Fault Module Timestamp:     4ce7ba58
      Exception Code:     c0000005
      Exception Offset:     0002e3fb
      OS Version:     6.1.7601.2.1.0.16.7
      Locale ID:     1033

    I have about the exact same error and it happens when I hit refresh to update the records.  When I go into the Formula Workshop, there is nothing in Report Custom Function.  Can you give me a little more detail on how you fixed the problem.
    Thanks.

  • Problem in Crystal Report 2008 selectionFormula

    Post Author: saro_j
    CA Forum: Crystal Reports
    Hi,
    I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
    When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
    Earlier I was using the following syntax for passing the date as selectionFormula
    Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
    But now when I run this same it says
    This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection: 
    u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
    I have no idea about this
    Even If I tried to pass as follows
    selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
    I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
    Please help me out on this regards.
    Thanks in advance
    Saravanan

    Post Author: jehanzeb
    CA Forum: Crystal Reports
    Hello,
    I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
    I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
    As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
    "This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection: 
    u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
    I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D

  • Invalid export DLL or export format" with Crystal Reports 2008 to Excel xls

    We are experiencing the same issue as reported in the sticky thread. I answered in that thread, but thought that I woudl open a new thread to keep track of this issue.  I can give you the responses to your questions you have requested in that thread:
    Server Operating System - MS Windows Server 2003 R2 Enterprise Edition SP2
    Version of the .NET Framework - MS .NET Framework 3.5 SP1
    How did you deploy? - Installed CR 2008 SP1 runtime with msi package
    If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size? CRRuntime_12_1_mlb.msi dated Sept. 16, 2008 12:55:00 PM, size: 56,717,824 bytes
    What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory - File was created 9/13/08 11:21AM, 9451KB File Version: 12.1.0.882
    How many libpng10.dll files are on your system? List all instances. - 1 instance is on the system located in C;\Program Files\Business Objects\Business Objects Enterprise 12.0\win32_x86 directory. It is dated 9/13/08 8:52:26AM 132KB version 1.0.30.1
    Any additional comments - We have tried to export to PDF and this works successfully. However, we can not export to xls or rft formats.
    CRXF_XLS.dll is 905KB 9/13/08 9:38AM Version 12.1.0.882
    CRXF_RTF.dll is 509KB 9/13/08 9:35AM Version 12.1.0.882
    We also have the CR XIR2 server runtime installed side by side on the server as we migrate from CR 2008 to CR XIR2 SP4 ( where this function does work currently).
    Please let me know if you need anything additional.
    Phil
    "Invalid export DLL or export format" with Crystal Reports 2008
    Posted: Sep 27, 2008 12:36 AM       E-mail this message      Reply 
    I've included this sticky because we are seeing many posts in this forum regarding the error Invalid export DLL or export format when exporting to Excel and RTF in .NET applications using the Crystal Reports 2008 .NET SDK.
    Issue
    Exporting a Crystal Report to Excel or RTF format
    .NET application using the Crystal Reports 2008 runtime (version 12.0)
    error Invalid export DLL or export format
    We've been doing some testing in-house and haven't reproduced this behavior. In order to figure this issue out we will need your help. If you are getting this error please reply to this post with the following information:
    Server Operating System
    Version of the .NET Framework
    How did you deploy?
    If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size?
    What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory
    How many libpng10.dll files are on your system? List all instances.
    Any additional comments
    What We Know
    The error invalid export DLL or export format may occur when exporting to Excel and RTF formats in .NET applications utilizing the Crystal Reports 2008 runtime (v 12.0)
    Other export formats like Adobe PDF, Crystal Reports, CSV all export with no error
    Some customers have resolved this by adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to their environment path variables
    This may have something to do with the file libpng10.dll. Both crxf_xls.dll and crxf_rtf.dll are dependent on it.
    Thanks in advance for your co-operation. We hope to figure out what is causing this issue soon.

    Hi,
    I am also having the same problem, except that I am not using Crystal Report 2008 runtime but the actual Crystal Report 2008 installation on Windows XP SP2 with VS Studio 2005 (VC++). MS .NET Framework 2.0.
    Cyrstal Report XIR2 was installed on the same machine but uninstalled before installing Crystal Report 2008.
    So only one instance of libpng10.dll and found in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
    Crpe32.dll        3/1/2008 version 12.0.0.683
    Crxf_xls.dll       3/1/2008 version 12.0.0.683
    Crxf_rtf.dll         3/1/2008 version 12.0.0.683
    crdb_oracle.dll  3/1/2008 version 12.0.0.683
    libpng10.dll       3/1/2008 version 1.0.30.0             122880 bytes
    There is no problem for exporting to pdf, html, word, csv, Crystal Report. If I create a testing report without any data from database, the testing report can then be exported also to rtf and xls.
    Oracle 11.1.0.6 is the DB for the reports.
    Adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to the path did not resolve my problem.
    Any idea to fix this issue?
    Thanks
    Kin H Chan

  • Crystal reports 2008 sp3 : An error has occurred while attempting to load t

    Hello,
    Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it.  If there is a better forum for this question, please let me know or feel free to move it.
    We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
    I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
    Our Environment:
    Development Computer (32-bit, WinXP)
      VS2008 (fully updated, was not installed with its Crystal Reports feature)
      Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
    Database Server (64-bit)
      "SERVER2" is a Microsoft SQL Server 2008 server, fully updated
    Web Server (64-bit)
      "SERVER3" is a Microsoft Server 2008 R2 Web server.
    We have an application that is installed on the Web server and it pulls data from the database server.
    The webpages are accessing the database properly.  There is a ShowReport.aspx webpage that has the
    CrystalReportsViewer on it.  We send parameters and logon information to ShowReport.aspx.  ShowReport
    works properly on our development computer and the report looks good, but it fails on the web server.
    We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
    Our application pool on the web server for this application is set to 32-bit mode.  When I launch the
    application, it works properly with the database and displays data on web pages, but when I try to
    view a report on ShowReport, I get the following error message:
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.
    According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
    the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed.  They are both Crystal Reports 2008 and not .NET.  CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3.  On our development computer, .ENGINE is 12.0.2000.0 and
    the same version is on the web server.
    So, I am completely at a loss as to why we are encountering this error.  Help, Please!!!
    Thank you in advance,
    Mike

    Hi Mike,
    Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
    Thank you
    Don

  • Error while trying to install Crystal Reports 2008 SP3

    Has anyone else come across this error before when running the SP3 update installer;
    Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
    The installation then terminates.  There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
    ANY help appreciated
    Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

    Priyanka,
    I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation.  Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
    Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
    Regards.

  • Crystal Reports 2008 SP3 Additional parameter values are needed

    I recently upgraded to Crystal Reports 2008 SP3, and now when I try an export a report from the Crystal Reports Designer, I get the error "Additional parameter values are needed before this report can be saved or viewed with data.  Click 'Ok' to enter the missing values or 'Cancel' to proceed without data".  I am trying to export the report to Crystal Reports format.  The report is getting data from a MS SQL 2005 stored proc. I tried building a new simple report (just took all the fields in the result set and put them in the details section) using the same stored proc, and get the same error when I try to export.  
    FYI, before I try to export I always preview the data in the report, so the parameters are defiantly set correctly.
    This was working correctly in Crystal Reports 2008 SP2.

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • Problem with Crystal report viewer

    I am using Crystal viewer 2008 with Crystal report 2008.
    I am using a static parameter.  When running with viewer I can not clik on modify to change the parameter because the modify button is grey.
    Help ty.
    Also where can I read limit of using Crystal Viewer ?
    And how much to get something better ?

    You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
    Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
    It works awesome and even works on dynamic parameters!

  • ECC integration with Crystal report 2008

    Hello,
    If some one have guide of ECC integration with Crystal report 2008 ? Please share me I need to integrate ECC to crystal 2008 integration.
    Regards,
    Sankar.G
    Basis Cosultant

    Do not cross post.
    Read the "Rules of Engagement"
    Regards
    Juan

  • Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5

    Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5.
    NOTE: I did not check other Crystal Runtime versions.
    Any solution?

    Visual Studio Premium 2012.
    It is a web application.
    It was working fine with Crystal Report version 13.0.5. Only change is uninstall Crystal Report version 13.0.5 and install Crystal Report version 13.0.10
    Entering page number works fine to view that page Request.Form parameters sample for that (change page from page 3 to page 5):
    __CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
    viewer_toptoolbar_search_textField:Bul...
    text_viewer_toptoolbar_selectPg:5
    text_viewer_toptoolbar_zoom:100%
    __CALLBACKID:viewer
    __CALLBACKPARAM:{"tb":"gototext", "text":"5"}
    Try to view New Page does not work. Request.Form parameters sample for that (try change page from page 2 to page 3):
    __CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
    viewer_toptoolbar_search_textField:Bul...
    text_viewer_toptoolbar_selectPg:2 / 5
    text_viewer_toptoolbar_zoom:100%
    __CALLBACKID:viewer
    __CALLBACKPARAM:{"tb":"next"}

  • Probleme with crystal report : a report with 3 levels

    hello...
    please am a from france, i have a bad english so is there somme one how speak frensh, i have a probleme with crystal report...
    so my first report, i have an XML file xith contine a lotof data, ils with a lot of level so i want that you show me how can i reprensent that, i can give u my wml file and also a word file to explain you what do i want comme result..
    so i have donwload an evaluation version of crystal report...
    thaks for u

    Hi alpacino,
       I know a really good actor that has the same name...and you're new to reports...hmmmmmmmm.....well, first of all,
    bravo to you for being able to write english at all.  I'm glad I don't have to learn it again.
       Go to the Group Expert and select one of your "levels".
    This will be your top group.  Then select the next "level", etc.
    I know you're not a dummy, but get a "Crystal Reports for Dummies" book and then a Crystal Reference book.  The dummy books are actually pretty good and give you a "from the ground" start.  Then keep coming back to the forum and test out your ideas by helping others.
    Hope this helps,
    The Panda

  • Crystal Reports 2008 SP3 - "u25azalea.dll" missing

    We have installed Crystal Reports 2008 SP3 on our application server.
    Windows Server 2008 R2  Standard
    64-bit operating system
    1. I create a Report and choose a field for barcode
    2. Right-click on a that field and choose u201CChange to barcodeu201D
    3. I choose "Code39" in the list
    4. I change the font of the field to "Barcode EAN13"
    5. It shows correctly in Crystal design/preview mode.
    6. When I try to run the report from our windows application this message appear: "UFL 'u25azalea.dll' that implements this function is missing"
    7. I download the file from http://www.azalea.com/crystal-reports/
    8. I copy the file "u25azalea.dll" into the path: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise     12.0\win32_x86
    8. It still shows the message!
    What should I do?

    Hello,
    No need to select #3 if you are going to change it to #4. Just edit the field and select your barcode font. You only need that file if you use the Code 39 font.
    Odd though that it asked for that ufl. Look for it on your local PC and copy it over, could be the one you downloaded is an older version.
    Don

  • Using Crystal Reports 2008 SP3 with the Brother 9500PC, 9700PC, and P9800PC

    We have using Crystal Reports with the Brother Label printers for years until we were forced to use Crystal 2008.  The label printers have worked in the past and we usually create a label template in the printer driver and this configuration is stored in the Crystal Report.  These label printers can use several different size cartridges.  When creating a report using the Editor, the report displays and prints correctly using the template embedded into the report.  This is using the updated SP3.3 service pack.  The problem is in the Run Time application that is embedded in another application to run the reports.  When printing a label from the application, the report previews just fine with the correct size and format.  However, when you try to print the label, the run time driver ignores the template embedded in the report and instead uses the default settings for the printer driver.  So, if I have a 1 inch cartridge in the printer, and the default settings for the printer is a 1 1/2 inch cartridge, then the report will try to print assuming there is a 1 1/2 inch cartridge which will cause the application to fail.  This is a problem with Crystal 2008 (12) and we would like to find a solution to this.  Thanks, Doug

    Hi Cameron, 
    You can setup custom label sizes in Crystal.  In the folder where you installed Crystal Reports is a text file called Labels_en.txt.  This contains the label definition Crystal uses.  You can add a new label in here. 
    Now when you open Crystal and create a new report by selecting the Mailing Label Repotr Wizard, you will see your new label when you get to that step. 
    When save a report, the report will do two things.  If you have set the report to a specific printer, Crystal saves the printer and paper settings inside the RPT.  When the print engine runs the report, if it can't find the printer saved in the report it will default to the default printer. 
    What I believe is happening is the application is loading the report and because it can't find the label printer it was designed with it's going to the default printer.  So you do have to set the PrintReportOptions in your application to redirect the report to the correct printer, driver and papersize. 
    This has pretty much been the way since version 4 that I can remember.  The positive side is you don't have to set all the parameters yourself.  You can get the PrintReportOptions from the report when you open it.  Then you just need to pass the printer name, driver and port.  The rest of the options (papersize) will already be populated from the Get. 
    Good luck,
    Brian

Maybe you are looking for