Landscape problems

Having Installed version 10.1.2 Build 20121119 of Adobe Reader X on my HTC 7 Pro (Windows Phone 7.8 updated) device, I'm having problems opening PDFs from webpages on the phones built in browser when the screen is in landscape mode (ie when the physical keyboard is slid out or the phone is turned width ways). On tapping a link all that happens is the page goes blank for a second or two and then reappears where I left off. Multiple attemps result in the same behaviour yet changing things to portrait mode results i things working as they should.
I have the HTC 7 Pro precisely because I like to use landscape mode for many things and I'd like this bug attended to please. Until Adobe can fix this (or perhaps provide a Beta version I can test for a solution - are you listening Adobe because I've received no response regarding my completed 'bug submisssion form' some weeks ago) does anyone have any solution other than having to re-orient my phone every time I want to view a PDF in Adobe Reader for Windows Phone?

Welcome to Apple Discussions
Most ink jet printers, especially HP, have a minimum trailing margin of 0.56 inches & there is nothing you can do to change it. Even those that do borderless printing only do borderless with photos, not text documents.

Similar Messages

Landscape Problems with Crystal Reports 2008 SP3

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

Reports 2.5: Portrait/ Landscape problem

I am facing a problem when I print either Landscape or Portrait
formats one after other. I am using the forms 4.5 to run reports
with out dialogue box. When I change the 'ORIENTATION' the margin
also changing, so part of the reports are not printed out.
Can some one help me.
Thanks.
null

hello MJS!
If I never mistaken, you want to print a report
using form by using run_product built-in procedures and
using this procedures,you set PARAMFORM PARAMETER to
FALSE that's why you didn't see the report parameter
on runtime.And you didn't initialize the
ORIENTATION parameter on this procedure that's
why your orientation is default or depend on
printer setup.
If this is your case then I suggest this solution.
a.)add this parameter on your parameter list
Add_Parameter(pl_id,
'Orientation',TEXT_PARAMETER,'landscape');
b.)In Report Designer open your program then
in SYSTEM PARAMETER you will find ORIENTATION as
one of its parameter list.Check its properties then
set INITIAL VALUE to LANDSCAPE;
I hope this will help. GOOD LUCK!
Dennis J.
Senior System Analyst / Programmer
NEC System Integrator & Const - JAPAN/MANILA
null

Landscape problems AIR 2.6?

Hi,
I would like to know if anyone has still problems exporting an ipa with both landscape-views by default with the new AIR version?
With the skaling, and autorotation my app works well, but now there is a little gap between the default-image and the app. With PFI that was not there, so before I am looking into that I would like to ask if you manage it to have an app starting flawlessly (and maybe without all that what we needed prior 2.6)...
Regards,
J.

Since I saw a couple of new air apps without any orientation possibility I think a lot of people experienced no problems.
However, when you want to support both sides of a landscape view did anyone encounter problems/gaps so far?
When I export the same app that worked fine with 2.5 with the new 2.6 I can see a gap of about two or three seconds and I was wondering if anyone else could see the same when trying to export the PFI apps?
Is autorotation in a landscapeview now working as intended and we don't need the scaling fixes anymore?
Regards,
Josh

TMS 3 system Landscap problem

Hi All,
I have configured 3 system landscape (DV1, DEV, VED). Here, DV1 is the Domain controller (win2003, MSSQL, 4.6c), DEV is the Quality system (Win2003, MSSQL, ECC6) and VED is the production system (Win2003, MSSQL, ECC6).
I have successfully configured the TMS and Check is done without errors. I have used three systems in a group to establish route. Transport layer is ZDV1. Now the problem is, whenever I release transport request from DV1( domain controller), It is not appearing in the DEV (quality ) system.
Can you please tell me where I have gone wrong?

Arun,
you could check the following:
Under Configuration Status, are all three systems activated?
Under Transport Routes, do you see both DEV and VED?
Make sure you have saved, activated and distributed the new model after your change.
Also - as an outside shot, if the transport request(s) were created before you configured TMS, check the Target System for that particular transport(s) and ensure that it is DEV.

Landscaping problem

my photosmart plus b209 will not print in landscape mode! please help....I need it! thank you!

- Next to the battery indicator in the upper righ is the an circle with padlock inside? If so then the screen-rotation lock is turned on. To turn off double click the Home button and swipe the botton row fully righ past the Muis controls and tap the cirecled padlock
- Next try the standard fixes:
--- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
--- Restore from backup
--- Restore to factory defaults/new iPod.
If you still have the problem then you likely have a hardware problem and an apointment at the Genius Bar of an Apple store is in order.

Portrait/landscape problems.

Photos taken in 'portrait' (camera turned 90 degrees) usually upload into iPhoto correctly. Just one batch have uploaded incorrectly and, although portrait in the library thumbnails, are loading individually, full frame, as landscape. The only way I've found to rectify this is to rotate thumbnails thro 90 degrees so the pictures are wrong in library thumbnails but load properly when selected individually for full frame display. This has only happened for one batch of uploads from the memory card, its usually OK. Any ideas how I can get thumbnails AND photos the right way up on screen?

domiles
Welcome to the Apple Discussions.
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Transport landscape problem (cannot change the object)

Hi All,
I have problem to change my object in the integration repository.
Initially, i only have 1 XI server (dev and prod), until certain level that i have to add additional server for development. So i just install new xi in new box (fresh). and export the repository object form production and import into this new box.
But the problem is i can't change all the object. is that any workaround to change the configuration so i can use my nex box become development and later on transport back all the changes to original production box.
Appreciate if you can give me some advise.
Thank you and Best Regards
Fernand

Hi,
If you need to change anything in repository
you need to click on the software component in IR
and at the bottom of the screen you will find two checks
that will allow (or not) you to change objects
if you want to change anything in communication channel
you just need to go to change mode
you can change anything in ID
Thanks
Swarup

B1i System Landscape Problem

Hi All,
Please Help me for the following secenario,
while i am connecting to B1i2005 system landscape i am getting following error,
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.Exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
java.io.IOException: HTTP request failed
Thanks & Regards,
Mahesh

Hi ,
Thanks for ur reply,
I Installed and Configured everything properly according to the installation Guides.
Thanks
P.Mahesh

Safari in Landscape Problem

WWhen I view internet pages in Safari I lose the page and Safari closes so that I am back to the desktop view. It's as if I pressed the home button. Anyone else experiencing this issue? If so, any fix? I like to use landscape view so I can view pages more easily.
THis gets annoying. Big? Virus? Just doesn't seem like it should do this.
I have an iPhone 6 plus 64 GB with current updated iO.

Thank you for your response. I didn't get back right away, but I wanted to make sure I could further assess the issue.
To answer you question: No, it seems to work on a number of sites which I could not find any relationship. In fact in one instance, I had to open a link that provided a PDF attachment which I opened. After a few seconds as moved through the pages, it crashed.
I thought I had it fixed after I did a further internet search using "iPhone 6 plus landscape crash" and I came up another community and the fix suggested was to remove the bookmarks column. Here's the link FYI: http://forums.macrumors.com/showthread.php?t=1809002&page=2 It seemed to work, but eventually Safari crashed while visiting various sites after a few seconds as I tried to scroll the page up/down.
I would say it's still an issue.

Music Landscape Problem

In the music app when i go to landscape mode it freezes when i scroll through the albums .........Help!!!!!!!

that worked until today, so 5 days of success. I think ill just try portrait lock until I need landscape. I guess that's kinda what it's there for
appreciate the help though
if anyone thinks of a more permanent solution, would appreciate that as well
thank you

IPhone landscape problem?

if i am stood up or sat down it wont go landscape it seems it only does it when it is on a perfectly flat service is there some sensitivity setting???

There's a whole section in the iPhone programming guide cover this.
here's a snippet:
Regardless of how you orient the design surface in Interface Builder, remember that nib files
themselves have no concept of interface orientation. Views are blank canvases that can be used for
many purposes, such as presenting content in a horizontal scroll view. Therefore, the size of a view
does not change its orientation at load time; it is always loaded in portrait mode. It is up to you
to rotate your views to the appropriate orientation after they are loaded. When you do this depends
on how you construct your application. If you construct your application using view controllers, you
can perform this operation in the viewDidLoad method of your view controller objects. If you are not
using view controllers, you can per form it in the applicationDidFinishLaunching: method after
creating your views or after loading them from a nib file.

Landscape problem

My project is simple enough and it's landscape format - the longest side is the width as a landscape should be. InDesign changes this to portrait which then causes mass confusion for printing. Any ideas?

I think you'll have to provide more detail as to how/when this happens:
InDesign changes this to portrait
In the document window? In the print dialog?

IPhone 5 landscape problems

Is it my imagination or are fewer apps enableing/allowing landscape mode. Seems like more apps do not switch to landscape from portrait mode when I turn the phone than ever. The phone is set correctly for automatic changing to landscape mode.

Hello!
I am having the same issue with my iPhone 5. I've tried everything to include three AT&T reps and two Apple reps. They told me to go get anew phone!

Problem with RTF

Hi,
can any one tel me how to calculate the Subtotal and buyer group total for the following XML file.
<?xml version="1.0" encoding="UTF-8"?>
<BUYSUM_EXT_ACTION_SUMMARY>
<P_START_DATE>2007/01/01 00:00:00</P_START_DATE><P_END_DATE>2007/01/01 00:00:00</P_END_DATE>
<LIST_G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>DENIECE</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>1</TOTAL_ORD>
<TOTAL_DLLR_AMT>374.112</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>IANPAUL</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>670</TOTAL_ORD>
<TOTAL_DLLR_AMT>572401.300005</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>37</TOTAL_WO>
<TOTAL_WO_AMT>13415.0756</TOTAL_WO_AMT>
<LIST_G_MI>
<G_MI>
<TOTAL_MI>18</TOTAL_MI>
<TOTAL_MI_AMT>9903.7925</TOTAL_MI_AMT>
<LIST_G_SB>
<G_SB>
<TOTAL_SB>139</TOTAL_SB>
<TOTAL_SB_AMT>68355.99915</TOTAL_SB_AMT>
</G_SB>
</LIST_G_SB>
</G_MI>
</LIST_G_MI>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>RBALDWIN</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>4</TOTAL_ORD>
<TOTAL_DLLR_AMT>7772.1335</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>THUGHES1</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>51</TOTAL_ORD>
<TOTAL_DLLR_AMT>100.913</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>VACHAVEZ</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>119</TOTAL_ORD>
<TOTAL_DLLR_AMT>2235.362075</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>SWAT</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>DELPHI</BUYER_SUBGROUP>
<TOTAL_ORD>4</TOTAL_ORD>
<TOTAL_DLLR_AMT>10428.534375</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>1</TOTAL_WO>
<TOTAL_WO_AMT>147.22</TOTAL_WO_AMT>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>YMBURKE</BUYER_ID>
<BUYER_GROUP>1</BUYER_GROUP>
<BUYER_SUBGROUP>STORES</BUYER_SUBGROUP>
<TOTAL_ORD>1</TOTAL_ORD>
<TOTAL_DLLR_AMT>113.6625</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>CHARDING</BUYER_ID>
<BUYER_GROUP>2</BUYER_GROUP>
<BUYER_SUBGROUP>AP</BUYER_SUBGROUP>
<TOTAL_ORD>20</TOTAL_ORD>
<TOTAL_DLLR_AMT>6334.400625</TOTAL_DLLR_AMT>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>KAJIKAWA</BUYER_ID>
<BUYER_GROUP>2</BUYER_GROUP>
<BUYER_SUBGROUP>AP</BUYER_SUBGROUP>
<TOTAL_ORD>193</TOTAL_ORD>
<TOTAL_DLLR_AMT>108276.8995</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>2</TOTAL_WO>
<TOTAL_WO_AMT>2747.1</TOTAL_WO_AMT>
<LIST_G_MI>
<G_MI>
<TOTAL_MI>2</TOTAL_MI>
<TOTAL_MI_AMT>541.25</TOTAL_MI_AMT>
<LIST_G_SB>
<G_SB>
<TOTAL_SB>15</TOTAL_SB>
<TOTAL_SB_AMT>9588.314975</TOTAL_SB_AMT>
</G_SB>
</LIST_G_SB>
</G_MI>
</LIST_G_MI>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>MSVIC</BUYER_ID>
<BUYER_GROUP>2</BUYER_GROUP>
<BUYER_SUBGROUP>AP</BUYER_SUBGROUP>
<TOTAL_ORD>675</TOTAL_ORD>
<TOTAL_DLLR_AMT>298109.0254343325</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>32</TOTAL_WO>
<TOTAL_WO_AMT>8954.9644</TOTAL_WO_AMT>
<LIST_G_MI>
<G_MI>
<TOTAL_MI>41</TOTAL_MI>
<TOTAL_MI_AMT>11676.784775</TOTAL_MI_AMT>
<LIST_G_SB>
<G_SB>
<TOTAL_SB>130</TOTAL_SB>
<TOTAL_SB_AMT>31356.4167</TOTAL_SB_AMT>
</G_SB>
</LIST_G_SB>
</G_MI>
</LIST_G_MI>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>SIMAJ</BUYER_ID>
<BUYER_GROUP>2</BUYER_GROUP>
<BUYER_SUBGROUP>PLANT</BUYER_SUBGROUP>
<TOTAL_ORD>20</TOTAL_ORD>
<TOTAL_DLLR_AMT>10139.937325</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>11</TOTAL_WO>
<TOTAL_WO_AMT>4493.795</TOTAL_WO_AMT>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>KEARNEY1</BUYER_ID>
<BUYER_GROUP>2</BUYER_GROUP>
<BUYER_SUBGROUP>TRAVEL</BUYER_SUBGROUP>
<TOTAL_ORD>2</TOTAL_ORD>
<TOTAL_DLLR_AMT>3039.625</TOTAL_DLLR_AMT>
<LIST_G_WO>
<G_WO>
<TOTAL_WO>1</TOTAL_WO>
<TOTAL_WO_AMT>2128.16</TOTAL_WO_AMT>
</G_WO>
</LIST_G_WO>
</G_BUYSUM>
<G_BUYSUM>
<BUYER_ID>JDMARC</BUYER_ID>
<BUYER_GROUP>3</BUYER_GROUP>
<BUYER_SUBGROUP>ADMIN</BUYER_SUBGROUP>
<TOTAL_ORD>3</TOTAL_ORD>
<TOTAL_DLLR_AMT>1822.19</TOTAL_DLLR_AMT>
</G_BUYSUM>
</LIST_G_BUYSUM>
</BUYSUM_EXT_ACTION_SUMMARY>
Thanks in advance

According to the landscape-problem. I have set orientation and
width+height for the MAIN-section, I have also set orientation
for the report. I have even set orientation and size for the
HEADER and TRAILER section and still the rtf-file contains the
line \lndscpsxn!?Interesting. I generate RTF reports in both landscape and
portrait. The width/height seem to be the key values; some
of my reports set orientation to LANDSCAPE but some use
DEFAULT and work too. You set height to 8.5 and width to 11?
Units are inches? What does the generated RTF show for
"\paperw" and "\paperh"? Should be 15840/12240 for landscape
and the opposite for portrait. (1440 twips = 1 inch)
I only set HEADER/TRAILER orientation and size if the report
contains those; the default values do not affect MAIN (as of
course they should not).
I've had lots of RTF generator problems, but not this one...
-- Allan Plumb

Landscape problems

Similar Messages

Maybe you are looking for