Landscape software
I am new to Mac (and am loving it). I own a garden center and landscape design company. I currently do all of my drawings by hand. I am interested in buying a landscape design software so I can use my Macbook even more! I have been looking around, but it seems all of the professional landscape design software runs on PC's only. So if anyone can recommend a Mac friendly alternative that would be great. Thanks.
Well I did a search and like you didn't come up with a whole lot. I'm sure there's something. But what I did remember was something you might be able to use and best of all it's free. So since it is you can't be hurt by at least trying it. And someone who's doing freehand sketches should be able to do pretty well with it.
Try Google Sketchup
Similar Messages
-
Does anybody know of some free landscaping software that works with Linux, either natively or under WINE?
Can't find any Linux stuff.
Found these in the Wine AppDB:
http://appdb.winehq.org/objectManager.p … n&iId=8680
http://appdb.winehq.org/objectManager.p … on&iId=518
You may need to use a virtual machine. Shouldn't be too bad. -
Hi,
In our origination we are using Aris for the modelling of business processes. From what I am lead to believe is that Aris integrates with SAP Solution Manager and Solution manager integrates with the SLD. So landscape, software products and software component information can thus be pulled into Aris for use in models. This will greatly assist in the business process modelling in Aris, I would imagine.
Now once the business process is modelled in Aris, is there a way of importing it, as say a Procomp Model in the ESR?
Would you want to?
Or would you just continue to model in Aris and then pull in the interface logic into the models on the Aris side?
What is then the use of the modelling tool in the ESR?
Would you recommend that one should remodel the Aris Business Process Models in to the Modeling tool in ESR?
As you can see I am looking for some guidance in this regard.
Many Thanks
Willie HugoHi,
The use of Modeling in ESR point of view
is In a service-oriented architecture of business applications, you ideally initially model your application prior to implementation. This means that you can answer fundamental questions such as what components the application comprises of, which services the individual components offer, and how the various different components interact with each other before you begin implementation. A governance process ensures that by using models, all services are always identified and defined in the same way, thus avoiding redundancies.
The models are not system-landscape-specific. Later on, they provide useful information when implementing services, as well as during any configuration that may be required. Furthermore, the models document different aspects of a business process, increase understanding of applications across departments and businesses thereby reducing costs when applications need to be changed or enhanced in a later release.
SAP they integrated ARIS modeling tool to develop Models,but i dont think so its possible to import ARIS models in SAP NetWeaver PI.But whatever models we developing in PI is based ARIS modeling only.
SAP works with this environment to create models for applications in the SAP Business Suite. These models are shipped to customers. You can create your own models in the ES Repository.
Regards,
Raj -
What is the SLD HTTP Port number?
Hello All,
What is the HTTP Port number that U should provide while doing the NWSP14 WAS installation.
Regards
DKHello,
The J2EE engine responds on the following ports:
http://help.sap.com/saphelp_nw70/helpdata/EN/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
The System Landscape Directory of SAP NetWeaver (SLD) serves as a central information repository for your system landscape. A system landscape consists of a number of hardware and software components that depend on each other with regard to installation, software updates, and demands on interfaces.
Information in the SLD is used by various SAP tools, for example, for planning and performing upgrades to the system landscape (Software Lifecycle Manager of SAP NetWeaver), finding destination information for ABAP systems and Web services (Web Dynpro), and for maintaining development information by the SAP NetWeaver Development Infrastructure (NWDI).
Regards,
Siddhesh -
I have made an install of JDI according to the installation guides
After the implementation of the JDI a try to create an DTR client in Eclipse but in
the DTR console in Eclipse a get following message:
Ping on server http://localhost:50000/dtr/ returned: 501 Not Implemented
I have check the CBS log and everything appears to be fine:
#1.5#000BDB4B84C3004D00000010000003100003FA9B18225A94#1119968961921#/Applications/CBS/Administration##com.sap.tc.cbs.service.CBSFrame#######SAPEngine_System_Thread[impl:5]_11##0#0#Info#1#com.sap.tc.cbs.service.CBSFrame#Java###CBS service has been started on node #1#4064250#
#1.5#000BDB4B84C3000D00000000000009D00003FA9BE7A28F68#1119972443187#/Applications/CBS/Administration##com.sap.tc.cbs.service.CBSFrame#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.service.CBSFrame#Java###Starting CBS service on node ...#1#4064250#
#1.5#000BDB4B84C3000D00000001000009D00003FA9BE890E802#1119972458812#/Applications/CBS/Administration##com.sap.tc.cbs.server.rt.NodeAdmin#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.server.rt.NodeAdmin#Plain###START Component Build Server build engine#
#1.5#000BDB4B84C3000D00000002000009D00003FA9BE8911AA9#1119972458828#/Applications/CBS/Administration##com.sap.tc.cbs.server.rt.impl.ResourceOrc#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.server.rt.impl.ResourceOrc#Plain### START Component Build Server build engine#
#1.5#000BDB4B84C3000D00000003000009D00003FA9BE891A681#1119972458859#/Applications/CBS/Administration##com.sap.tc.cbs.server.rt.impl.ResourceOrc#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.server.rt.impl.ResourceOrc#Java###CBS node : initialization complete#1#4064250#
#1.5#000BDB4B84C3000D00000004000009D00003FA9BE8A586C2#1119972460156#/Applications/CBS/Administration##com.sap.tc.cbs.server.rt.NodeAdmin#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.server.rt.NodeAdmin#Java###CBS node : initialization complete#1#4064250#
#1.5#000BDB4B84C3000D00000005000009D00003FA9BE8A59457#1119972460171#/Applications/CBS/Administration##com.sap.tc.cbs.service.CBSFrame#######SAPEngine_System_Thread[impl:5]_45##0#0#Info#1#com.sap.tc.cbs.service.CBSFrame#Java###CBS Service version is running with following settings:
#2#6.40.0#JDK_HOME_PATHS = 'JDK1.3.1_HOME=C:
j2sdk1.4.2_06;'
rootFolder = 'C:/temp/CBS'
threadPoolSize = '3'
BUILD_TOOL_VM_ARGS = '-Xmx1000M'
BUILD_TOOL_JDK_HOME = 'C:
j2sdk1.4.2_06'
nodeID = '4064250'
notifyTCS = 'true'
AdminTaskDelay = '5000'
cleanUpRequestFolders = 'true'
tcsQueueCheckDelay = '10000'
idleStart = 'false'
useClassicSync = 'true'
com.sap.tc.cbs.server.BuildControllerClassPath = 'C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
services
tc.CBS.Service
CBSBuildTool.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
services
tc.CBS.Service
cbs.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
com.sap.tc.Logging
loggingStandard.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
sapxmltoolkit
sapxmltoolkit.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
opensql
sqljapi.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
opensql
opensql.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
tc.CBS.CommonPart
cbsdbapi.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
tc.CBS.CommonPart
cbscontroller.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
tc.CBS.API
cbsclient.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
tc.CBS.API
cbscommon.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
tc.CBS.API
cbsutil.jar;C:
usr
sap
J2E
JC00
j2ee
cluster
server0
bin
ext
t
Does anyone have any clue whats wrong?
Thanks!Hi,
check http://localhost:50000/sld here you will crete a Software component.
<b>System Landscape Directory</b>
The SAP System Landscape Directory (SLD) maintains information about all installable and installed elements of your system landscape.
System Landscape
Technical Landscape
View and define systems, servers, and clients of your system landscape.
Business Landscape
Software Catalog
Search for products and software components.
Development
Name Reservation
Manage name reservation for development.
Content Maintenance
View and change generic CIM data.
Class Browser
View detailed CIM class
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/96/5cc5d7a3e741d3905e37d460c4d8c3/frameset.htm
Scenario 3: Layered Development->Working With the DTR
Scenario 2: Development with a Track->Development Steps in the Scenarios 2 and 3
Settings of the Ignored Resources
http://<server>:50000/deinf you will see
CMS: Change Management Service
CBS: Component Build Service
DTR: Design Time Repository
check DTR is accssible
Meanwhile chk the URL
http://help.sap.com/saphelp_nw04/helpdata/en/2d/732441509fa831e10000000a1550b0/content.htm
Regards,
RK
Message was edited by: Ramakrishna Venkat -
My SLD Homepage contains 3 categories
Landscape (System , Technical and Business Landscapes)
Software (Software Catalog)
Development (Name Reservation, Content Maintenance, Class Browser).
What is the Purpose of the Development? Could some one explain me the 3 different areas Name Reservation, Content Maintenance, Class Browser).
ThanksHi Rohini,
<i>What is the Purpose of the Development</i>?
>>> This contains components like Name Reservation,NameSpace prefix etc.
This is used to reserv some of the naming standrads to your Software component/Namespaces to avoid confilicts between the standard/delivered one's.
http://help.sap.com/saphelp_nw2004s/helpdata/en/df/2761930dd9b74a85198f9e48850046/content.htm
Lots of new questions.. Good to discuss..
Regards,
Moorthy -
XI Components include what?
1. Intergration Builder
2. Integration Server
3. Central Monitoring
4. Adapter Engine
What else include in XI component?.
Will SLD is xi component?.Hey Guys,
To know that either SLD is part of XI or it belongs to other module as well, please see page 6 of the help file of SLD where it is written <b>"Information in the SLD is used by various SAP tools, for example, for planning and performing upgrades to the system landscape (Software Lifecycle Manager of SAP NetWeaver), finding destination information for ABAP systems and Web services (Web Dynpro), and for maintaining development information by the SAP NetWeaver Development Infrastructure (NWDI)."</b> For more see the below link:
Architecture
Note: Ash, as Prabhu has also mentioned and I will also request you that please do not be rude to anyone, especially to the person who has contributed a lot to the SDN. People here on SDN spend their time in posting reply not for only points, its people's interest or call it their passion to resolve others problem. Instead of it you can oppose the person in a well manner. Take it as my suugestion. I am sorry if it hurts anyone.
Regards,
Subhasha Ranjan -
Hi!
When I access http://<localhost>:50000/sld, then clicking on to Technical Landscape, I get an error "Please set the SLD Parameter Object Server first".
I suspect that I haven't activated SLD. So I searched on how to activate it and found this procedure, "Configuring and Activating System Landscape".
http://help.sap.com/saphelp_nw04/helpdata/en/52/784641db92491de10000000a155106/frameset.htm
<i>Procedure
The SLD is part of the J2EE Engine. To activate and configure an SLD; you need to perform the following steps:
1. Execute the following URL to open the SLD start page: http://<host>:<port>/sld. <Host> and <Port> are the values for the associated J2EE Engine.
2. Choose Administration -- Server Settings.</i>
The weird thing is that when I access SLD start page, I couldn't find "Administration" in it.Additional Info:
I can also see a clickable link below that says, "Namespace: sld/active".
When I click on it, a prompt comes out "Please start the SLD server first."
> Hi Bhavik,
>
> Yes, the SLD page is coming properly after using
> Administrator.
>
> I couldn't find the link "Administration". I can
> only see clickable links like HOME, HELP, TECHNICAL
> LANDSCAPE, BUSINESS LANDSCAPE, SOFTWARE CATALOG, NAME
> RESERVATION, CONTENT BROWSER, and CLASS BROWSER.
>
> After logging in successfully with Administrator, I
> click on TECHNICAL LANDSCAPE. Then that is when I
> get the error.
>
> Thanks!
>
> Erik -
I uploaded the new software this week and no longer can view google in landscape mode
I uploaded the new software this week to my ipad2 and now my google does not go into landscape mode when I put the ipad on my keyboard
To be honest, I can't tell you specifically why Google won't work in landscape mode - but I have some good suggestions.
1. Delete your Google App, and redownload it - and make sure you've chosen the version for iPad. This fixes the problem for most users.
2. Use an alternate app, like Safari (which has loads more features) or Chrome, both for iPad. And the search results are exactly alike. -
Unable to read software component versions from System Landscape Directory
Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Brucehi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM -
Unable to read software component version from System Landscape Directory "
I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
2. Select the scenario PI and the task PIPostInstallProcess.
3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
4. Choose Install. -
Unable to read software component versions from System Landscape
Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
GiangHi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri -
Videos not playing in landscape mode after upgrading my Z10 software to latest version
Hello,
Videos in my Z10 iss not playing in the Landscape mode after upgrading my Z10 smart phone software with the latest version. I think it is not sensing when i turn my phone.
Is it a bug in the upgraded software or do i need to do any changes in the settings.
Also -- i dont seem to have Blackberry balance on my Z10. Please advise
regards,
YogeshMaybe someone else has another suggestion? I'm running 10.2, not released by VZW Yet. Works fine.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN. -
Custom software component not selectable in Landscape Configurator
Hello all,
I am trying some tutorial about Java development with a track and the developer studio.
I have successfully created the software component in my SLD, which is well linked to the NWDI. When creating a track in the Landscape Configurator, however, I cannot find my newly created Software Component when trying to specify the SCs developped in this track. I can see all the standard ones which are defined in my SLD, but not mine.
I already performed this step for other tracks with other custom-defined SCs without problem, but this time it does not work.
Does someone have a hint of what could cause this ?
Thanks,
ThomasIn addition to realizing that I had not created this thread in the right forum, I have also find the solution. I just had to go to the Landscape Configurator, in Domain Data, and click the "Update CMS" button.
Maybe this will help someone sometime. -
Best landscape design software
What is the best software to download for a landscape professional for design
Hi there,
You do not need to buy at this first time, assuming you do not have graphic design experience you can start by using an Apple application as Pages, Keynote, iPhoto or others in your /Applications/ folder, check it out, try opening applications, read tutorials and welcome presentations or open a template file for some start edition.
After that you can try a freeware third party application, you will find many of that here: http://osx.iusethis.com/tag/graphics
Professional applications require a minimum specific knowledge that you would naturally acquire after sometime around with these others.
Before go on using third party apps would be smart to get one smart removal tool so that you'd be able to remove applications you do not like and related support files in one move, which would be better than having useless files remaining in your system. I use AppCleaner - http://www.freemacsoft.net/ - with it's SmartDelete Preference enabled, set it up if you will.
Despite most of Mac's applications only need to be copied to your HDD to be ready to run, they usually keep some support file maybe elsewhere the ~/Library and/or /Library/Application Support/ folders.
Good luck
Maybe you are looking for
-
Nuttin works for me in snow leopard
well, now that i have upgraded, pages, numbers, keynote, ical, and a host of other items won"t open...all i get is report sent to apple....like that will help me out now that school is starting and I have to use this coimputer to be somewhat producti
-
Media query for iPhone 4s and iPhone 5
What is the Media Query for iPhone 4s and iPhone 5 in landscape and portrait mode
-
Why can't my After Effects import .MP4 XDCAM files ???
I've searched everywhere for this and couldn't find the solution to it. Whenever I try to import a .MP4 file my After effects says "After Effects error: file 'xxx.mp4 cannot be imported - this 'xxx.mp4' file is damaged or unsupported" ....but I've ed
-
Hi, I have partitioned my cube into 1252. While activating it gave me following error? RSDU_ADD_DDSTORAGE_TAB_PAR_MSS/MSSQL Has anyone come across this type of error ever? If yes, please share how you resolved it. Thanks
-
HFM Copy Application v11.1.3
I have done a copy app from a SQL to an Oracle DB, the following error occurred when opening the application. Error Code: -2147467259 Trace: Error Reference Number: {D4CFD4A7-7269-42F0-AAF1-0716706A0937};User Name: Test@Native Directory<BR>Num: 0x800