Language Imported Package

Hello SAP GURUS
In my Language Management Screen (SMLT)
ENGLISH
   Import Package
      INITIAL with green icon appearing
can anyone explain me why does appearing INITIAL entry..and what does means of that
my primary langauge is Arabic
   secondary and system language is English which has been supplemented
Regards
Anwer Waseem
SAP BASIS

Hi Anwer,
INITIAL means this language was installed as default language (English and German), the green light means the language is installed correctly
Hope this help!
Juan

Similar Messages

Help required to recognize the correct language import package

Hi friends,
I am trying to import ukranian(UK) language to SAP system using SMLT transaction.Please help me to identify the correct 'language import package'
from the DVD dump.I cannot recognize the correct DVD .I am not clear how do I realize the exact package from the DVD dump.Kindly help me.
Regards,
Syam krishnan

Hi Syam
Please refer the TWO notes for clarity
Note 97476 - Language availability R/3 4.0x - 4.7x, ECC500
Note 517310 - Ukrainian language import has been filled w/ Russian
Cheers,
Shyam

Language Import

Dear All,
I have a requirement to install the Arabic language. I am trying in IDES first(ECC 6) and the steps which I follow ,
1. Copy the file ARNW04S2.PAT from the DVD ( 2004 SR2 ) and put it in /usr/sap/trans/EPS/in folder.
2 . Went to SMLT and Classify Language, select Arabic and supplementary as English.
3. So now I could see Arabic in the main screen of SMLT. and then select Arabic --> Import Package
Language           Arabic
Path               /usr/sap/trans/EPS/in
SAPKLAR700SR2NW04SF0    Language NetWeaver 2004s SR2             AR 24.08.2006
and setting it was the Current Client ( 000).
4. The import of packages was successful now and I could see in the SMLT the Arabic languages> imported Packages> SAPKLAR700SR2NW04SF0    and green status.
5. Now when I do Language> Special Action> Import Support Packages and then see Support Packages found in system and some list of Status description like
Must be imported ( highlighted)
Translation already exists for this Support Package
Now if I enter it another screen comes with Step: Search for Existing Files at the Operating System Level
and waiting for Path for CAR Archives and description like
Not Found
I am stuck at this step and when I press Enter
Reduce the list to all found packages, or specify the paths
to the CAR/SAPCAR archives.
even if I give the path /usr/sap/trans/EPS/in .. the same thing happens.
Is there any other steps to do????
Also in instance profile the zcsa/inst... is AR.

The step
Choose Language u2192 Special Actions u2192 Import Support Packages.
is remaining from my side as I could not go ahead. Lots of message as already discribed.
Any solution to it???
Now I am trying to download the SP from servicemarket place. Can anybody suggest me which to download as per the error message in SMLT> Spl Action> Import SP
Translation already exists for this Support ( so shld I download the SP for it?
and
Must be imported( so I need to download the SP for it). It has all very big list of all the SAP components. Should I need to download for everything??
Language not in package. Language not necessary. SAPK-60001INFINBASIS Financial Basis Support Package 01 for Release 600
There are lots of this now,
14          Translation already exists for this Support Package     SAPKW70003     BW Support Package 03 for 7.00
15          Must be imported     SAPK-60001INECCDIMP     Object list for ECC-DIMP 600 SP01
16          Must be imported     SAPK-60001INFICA     Object list for FI-CA 600 SP01
17          Must be imported     SAPK-60001INFICAX     Object list for FI-CAX 600 SP01
18          Must be imported     SAPK-60001ININSURANC     Object list for INSURANCE 600 SP01
19          Must be imported     SAPK-60001INISCWM     Object list for IS-CWM 600 SP01
20          Must be imported     SAPK-60001INISH     object list for IS-H 600 SP01
21          Must be imported     SAPK-60001INISM     object list for IS-M 600 SP01
22          Must be imported     SAPK-60001INISOIL     object list for IS-OIL 600 SP01
23          Must be imported     SAPK-60001INISPSCA     object list for IS-PS-CS 600 SP01
24          Must be imported     SAPK-60001INISUT     object list for IS-UT 600 SP01
25          Must be imported     SAPKE60001     object list for SAP_HR 600 SP01
26          Must be imported     SAPKGPAD01     object list for EA-APPL 600 SP01
27          Must be imported     SAPKGPDD01     object list for EA-DFPS 600 SP01
28          Must be imported     SAPKGPFD01     object list for EA-FINSERV 600 SP01
29          Must be imported     SAPKGPGD01     object list for EA-GLTRADE 600 SP01
Language not in package. Language not necessary.     SAPK-60001INFINBASIS     Financial Basis Support Package 01 for Release 600
Language not in package. Language not necessary.     SAPK-60001INERECRUIT     ERECRUIT 600: patch 0001
Language not in package. Language not necessary.     SAPKGS6001     SEM-BW Support Package 01 for Release 600
Language not in package. Language not necessary.     SAPK-60001INLSOFE     LSOFE 600: patch 0001
Language not in package. Language not necessary.     SAPKIBHDA0     LC Applications (LCAPPS) 2005_700
Language not in package. Language not necessary.     SAPK-700U7INSAPSLL     SLL-LEG 700 : Add-On Supplement
Language not in package. Language not necessary.     SAPK-200UDINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Language not in package. Language not necessary.     SAPK-200UFINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Language not in package. Language not necessary.     SAPK-200UOINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Language not in package. Language not necessary.     SAPK-200URINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Language not in package. Language not necessary.     SAPK-200UKINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Language not in package. Language not necessary.     SAPK-200UMINWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (Delta Task)
Edited by: Basis Ad on Sep 29, 2008 3:06 PM
I am trying to get the SP from service marketplace for eg. for FI_CA as suggested in the message, but its a note
   HTM SAPK-60001INFICA SP 01 for FI-CA 6.00 Info 3 24.10.2005
So downloading it will it make sense?
Edited by: Basis Ad on Sep 29, 2008 3:15 PM

Language Import Error using Transaction SMLT - STRALAN_MSAG      075

Hi ,
   My current client required Chinese Language - ZH (Chinese Simplified) in ECC 6.0 SR3 Unicode System
   As per procedure, i have added chinese language 'ZH' using i18n -> i18n Customising -> i18n System Configuration menu.
   Later in Transaction 'SMLT', i tried to add the language pack "ZHECC63F.PAT" by pasting & importing from EPS/in folder. The Import is getting terminated stating "Incorrect package format".
    Kindly let me know what is the correct format. I have pasted the "ZHECC63F.PAT" file from the Language Installation DVD (51033496) delivered by SAP with license order.
SM37 gives the below message
Date       Time     Message text                                                                        Message class Message no. Message ty
06.11.2008 17:06:56 Job started                                                                              00           516          S
06.11.2008 17:06:56 Step 001 started (program RSTLAN_IMPORT, variant &0000000000000, user ID KPITBASIS)      00           550          S
06.11.2008 17:06:56 Application log IHBD9Cot09hX08002aGV2W                                              STRALAN_MSAG      109          I
06.11.2008 17:06:56 Restart import (state:lc_disassemble)                                               STRALAN_MSAG      103          I
06.11.2008 17:06:56 ... system date: 06.11.2008 system time: 17:06:56                                   STRALAN_MSAG      363          I
06.11.2008 17:06:57 Step DISASSEMBLE ...                                                                STRALAN_MSAG      050          I
06.11.2008 17:06:57 ... system date: 06.11.2008 system time: 17:06:57                                   STRALAN_MSAG      363          I
06.11.2008 17:06:57 ... do not overwrite data files and cofiles (settings)                              STRALAN_MSAG      095          I
06.11.2008 17:06:57 Incorrect package format                                                            STRALAN_MSAG      075          E
06.11.2008 17:06:57 Job cancelled after system exception ERROR_MESSAGE                                       00           564          A
Action Log from SMLT givesbelow error
Start import (state:initial)
... system date: 06.11.2008 system time: 16:42:51
Version: 700.F.15
Step INIT ...
... system date: 06.11.2008 system time: 16:42:51
... configuration "Selective Language Import"
... executed successfully
Step DISASSEMBLE ...
... system date: 06.11.2008 system time: 16:42:52
... do not overwrite data files and cofiles (settings)
Incorrect package format
Restart import (state:lc_disassemble)
... system date: 06.11.2008 system time: 16:50:24
Step DISASSEMBLE ...
... system date: 06.11.2008 system time: 16:50:24
... do not overwrite data files and cofiles (settings)
Incorrect package format
Rgds
Ganesh.S

Hello Ganesh,
You need to restart the import by cancelling it and restarting it again from SMLT.
Just cancel the current import! And we would need to reimport the same with the correct patches!
Following OSS notes would provide you further insights:
Note 830722 - Current note for language transports in Release 7.0
Note 195442 - Language import and Support Packages
Note 48047 - Mode of operation of report RSREFILL
Thank You,
Antarpreet

Language import using SMLT

Hi,
I'm trying to import the French language into a 4.6c R/3 IDES training system. In transaction SMLT during the import process i'm having an issue with the path for the language packages. How do i point this to Front End Cd drive? Whatever path I put in there, it returns with an error, "Specify a valid path". I've tried copying the files to the local SAP server in a directory, for example to C:\lang and entering this into the path, but still have no sucess.
According to this : -
http://help.sap.com/saphelp_nw2004s/helpdata/EN/a3/30ad5296b511d384bb0060975b04f3/content.htm
There should be an option to "Load from Front End", this I don't have to can't see.
Thanks for your help!

Hi Tin,
check below things
Before you start transaction SMLT for language import, you must configure the required languages using the RSCPINST report. For more information, see SAP Note 42305.
In SMLT, the names of the imported language packages are only displayed with up to 12 characters. Therefore, language packages with longer names (up to 20 characters) are truncated.
Also check
http://help.sap.com/erp2005_ehp_02/helpdata/EN/21/5532d395ea11d384bb0060975b04f3/content.htm
Regards
Ashok

SMLT -- Czech Language Import -- .PAT files

Dear Support,
We are planning to import/add a new Czech Language into our ECC 60 system.
When I called the SMLT transaction to import the language from FrontEnd, the system is not finding the content from the CD 51033496_1. The CD has .PAT files instead of .sar or .car files.
I have also copied the .PAT file onto /usr/sap/trans/EPS/in, but still the SMLT tool is not finding the language content to import.
Could you please help me out with this issue?
Thank you,
Nikee

HI Nikee
check this SAP Nope , hope this will solve ur issue
Note 1254022 - SMLT: Language imports not displayed in EHP systems
SMLT displays only the languages for which the current (SAP Basis) release has been imported. This makes sense because otherwise, the system would also display the language imports for the previous release after an upgrade. The problem now occurs because the systems that have an Enhancement Package imported the same language packages as the systems that do not have an Enhancement Package even though the release is different. For example, the SAP Basis 7.00 language package is imported into an SAP Basis 7.01 system. Since the releases do not correspond, the system does not display the language package in SMLT.To correct the error, SMLT must recognize an Enhancement Package release and the release check for this must be configured in a more flexible way
Cheers
dEE

Selective language import during EHP5 install

Hi,
I do not find where is defined language vector for import?
How can I change it?
The log for support package show info:
4 ETW000 language vector during export: 12345689ABCDEFGHIJKLMNOPQRSTUVWXYcd
4 ETW000 language vector during export: 12345689ABCDEFGHIJKLMNOPQRSTUVWXYcdģ© (ISO-ZHTHKOROSLHRUKETARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGLTLVCASHVI)
4 ETW000 lsm during export: ALL
4 ETW000 trfunction = D (patch transport)
4 ETW000 switching to selective language import
4 ETW000 the following languages will be imported: 4DEWX .
Where is language vector 4DEWX defined?
We are on ERP 6.0 EHP4 and upgrading to EHP5.
Algimantas Raginis

Hi,
If I am correct parameter ZCSA/INSTALLED_LANGUAGES value is called default language vector.
But our ZCSA/INSTALLED_LANGUAGES <> 4DEWX.
Is it possible to change language vector during EHP5 install?
We have a lot custom translations, but SAP attempt to translate into Lithuanian language is ugly.
We want to exclude some SAP language translations during EHP5 install.
Algimantas Raginis

PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log

Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING    2011-02-23 19:56:12.607
           CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE      2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR      2011-02-23 19:56:12.607
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PM

Hello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul

Loading of 'SEOCOMPODF' import package is interrupted with R3load error.

Dear SAP Colleagues,
Please advice with the following, we try to install SAP ERP 6.0 support release 3 on windows 2008 server with oracle database 10g 10.2.0.4.0,
The error is occurred in Import ABAP phase as follow,
ERROR 2010-10-14 12:10:00.729
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
Hint : I already applied this scenario of installation in two other server with same hardware and sap software and itu2019s already up and running,
From my side I applied the following but nothing is changed,
u2022     Applied sap Note 709389
u2022     Replaced the sap source more times,
u2022     Maintained the paging file,
u2022     Restart the sap server
u2022     Restart the installation from scratch
Also I can see that the oracle service and listener is started automatically
I checked the log files mentioned above as follow,
Contents in log file u201Cimport_monitor.javau201D
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) Client VM (build 1.4.2_17-b06, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 23, failed 0, total 28.
Import Monitor jobs: running 2, waiting 3, completed 23, failed 0, total 28.
Import Monitor jobs: running 3, waiting 2, completed 23, failed 0, total 28.
Loading of 'SEOCOMPODF' import package: ERROR
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Loading of 'FUPARAREF' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 1, waiting 1, completed 23, failed 3, total 28.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 23, failed 4, total 28.
Contents in log file u201Cimport_monitoru201D
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'SEOCOMPODF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i SEOCOMPODF.cmd -dbcodepage 4103 -l SEOCOMPODF.log -stop_on_error' exited with return code 2.
For mode details see 'SEOCOMPODF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i DD03L.cmd -dbcodepage 4103 -l DD03L.log -stop_on_error' exited with return code 2.
For mode details see 'DD03L.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'FUPARAREF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i FUPARAREF.cmd -dbcodepage 4103 -l FUPARAREF.log -stop_on_error' exited with return code 2.
For mode details see 'FUPARAREF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is started.
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'TODIR' import package into database:
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
ERROR: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error' exited with return code 2.
For mode details see 'TODIR.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-14 12:10:00
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-14 12:10:00
4 error(s) during processing of packages.
INFO: 2010-10-14 12:10:00
Import Monitor is stopped.
Regards,
Ahmed Saber

Hi Gagan Deep Kaushal,
The todir.log file it was so big so I backup it run the installation again to regenerate the log file, please find below the log file you requested,
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20101014135456
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20101014135457
Regards,
Ahmed Saber

SAPAPPL0,SAPSSEXC,SAPAPPL2 import package is interrupted with R3load

Hi SAP Experts,
I am installing ECC 6.0 SR1 EHP4 with DB29.1 on AIX6.1 but durning Import ABAP , I am getting error
SAPAPPL2' import package is interrupted with R3load error.
SAPAPPL0' import package is interrupted with R3load error.
SAPSSEXC' import package is interrupted with R3load error.
I am attaching all the logs import_monitor,import_monitor.java, SAPAPPL2,SAPAPPL0,SAPSSEXC
Kindly help me to come out from this error.
Import_monitor----
TRACE: 2010-08-19 22:16:46 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:18:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-08-19 22:18:14
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-08-19 22:18:14
3 error(s) during processing of packages.
INFO: 2010-08-19 22:18:14
Import Monitor is stopped.
SAPAPPL2
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(TSK) ERROR: file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK possibly corrupted
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
SAPAPPL0
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: /1CN/CPTSAP00005 dropped #20100819221758
(DB) INFO: /1CN/CPTSAP00005 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005~0 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005SC created #20100819221759
(IMP) INFO: import of /1CN/CPTSAP00005 completed (0 rows) #20100819221759
(DB) ERROR: DDL statement failed
( CREATE TABLE "/1CN/CPTSAP00006" ( "CLIENT" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "VARNUMH" CHAR(16) FOR BIT DATA NOT NULL , "PRT_PARTNER" CHAR(16) FOR BIT DATA NOT NULL , "KSCHL" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "OBJECT_ID" CHAR(16) FOR BIT DATA , "TIMESTAMP_TO" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "RELEASE_STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "TIMESTAMP_FROM" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "KSCHL_SUPP" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "COND_GROUP_ID" CHAR(16) FOR BIT DATA , "MAINT_STATUS" SAPDB6CHAR(2) DEFAULT ' ' NOT NULL , "CREATED_BY" SAPDB6CHAR(12) DEFAULT ' ' NOT NULL , "CREATED_ON" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "KOPOS" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "SUPP_EXIST" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SCALE_DIM" SAPDB6FIXCHAR(2) DEFAULT '00' NOT NULL , "KBETR" DECIMAL(15,2) DEFAULT 0 NOT NULL , "KPEIN" DECIMAL(5,0) DEFAULT 0 NOT NULL , "KMEIN" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL , "KONWA" SAPDB6CHAR(5) DEFAULT ' ' NOT NULL , "KRECH" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL ) IN LD1#STABD INDEX IN LD1#STABI LONG IN LD1#STABD )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221800
SAPSSEXC
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: BRATEXT dropped #20100819221647
(DB) INFO: BRATEXT created #20100819221647
(DB) INFO: BRATEXT~0 created #20100819221647
(IMP) INFO: import of BRATEXT completed (0 rows) #20100819221647
(DB) ERROR: DDL statement failed
( CREATE TABLE "D010INC" ( "MASTER" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL , "INCLUDE" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL ) IN LD1#ES701D INDEX IN LD1#ES701I LONG IN LD1#ES701D )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
IMPORT_MONITOR.JAVA
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20100615 (JIT enabled)
J9VM - 20100610_59470_BHdSMr
JIT - 20090210_1447ifx2_r8
GC   - 200902_24)
Import Monitor jobs: running 1, waiting 3, completed 24, failed 0, total 28.
Import Monitor jobs: running 2, waiting 2, completed 24, failed 0, total 28.
Import Monitor jobs: running 3, waiting 1, completed 24, failed 0, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 24, failed 2, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 24, failed 3, total 28.
PLEASE HELP ANYONE TO RESOLVE THIS ERROR

SAPINST.LOG
INFO 2021-03-23 14:09:35
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.14.xml'.
INFO 2021-03-23 14:09:36
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.15.xml'.
INFO 2021-03-23 14:09:40
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2021-03-23 14:10:04
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.8.xml'.
INFO 2021-03-23 14:10:04
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (S-1-5-21-1712382466-689420201-920741312-1010).
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (ProtectedRoots).
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:11
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:10:43
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:10:43
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:10:43
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2021-03-23 14:10:45
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:46
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:11:16
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 15, failed 1, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:11:16
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:11:16
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

Error while running import package

Hi,
Transformation file was validated successfully. But after running import package i am having following error on MS-BPC-7.0.
Invalid character in the given encoding. Line 1, position 1.
When i try validate and process trans file i am having the following error message. But same data file and same trans file was working till couple of days ago. After that whatever changes i have made to file, i did revert them to have it working like beofre.
Warning: Some records were rejected.
Rejected records reference either calculated members or invalid members.
Actually rejected record is only, one, but even other data was not loaded.
Thanks in advance for sharing your ideas or similar experiences.
Thanks,
KK

Hi,
There is definitely some problem with one of the records there. Do you have header? What is the delimiter? Do you have the same delimiter in the transformation file? You need to take a look at all the possibilities.
Hope this helps.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

Korean Language Support Package required for Reader but not Acrobat?

One of our departments on campus has created a form that is causing some users to get a message prompting them to download the Korean Language Support Package in order to fill in the form fields.
When I originally tested this in Acrobat Pro 9 I didn't get any errors. Another user also reported the issue recently (two this week). So we tested it again, but this time used both Reader 9 and Reader X -- both programs were generating this message to download the language pack. The form appears to be completely in English with no Korean characters. It uses fairly standard fonts and I didn't see any embedding or encoding issues with the fonts.
Aside from having end users download a Korean Language Support Pack to view a PDF that doesn't seem to contain any Korean, are there any other options out there without recreating the form from scratch? Here is a list of the fonts used in the PDF. The only types of encoding are Ansi and Identity-H (which I expanded in the SS above), with the latter fonts being embedded within the PDF.
Any ideas? The form is linked below. Thanks in advance for your replies.
Here is a link to the PDF

SOLVED
While our problems differ, my solution may still be relevant.
My culprit was a rogue font in an embedded Visio drawing. I identified and located the font using the "List text using non-embedded fonts" Preflight analysis in Acrobat 9.4 Pro. I checked the encoding of each non-embedded font and discovered that Arial Unicode MS used Korean font encoding (specifically, KSCms-UHC-H). See screenshot below. Doubleclicking on one of the font properties highlighted the offending text in the pdf.
I went to that location in the source file, which happened to be in the first embedded Visio drawing (shown above). I double clicked the drawing, selected all, and selected Arial font. Then I regenerated the pdf and viewed it in Reader X. The Korean language pack error message did not appear and all Visio drawings displayed normally.
I would recommend using the Acrobat preflight tools to locate text or objects with incorrect font encoding within your PDF or form, then surgically striking (or carpet bombing) the affected location(s) in the source files with embedded/supported fonts.
Hope this helps.
Message was edited by: mugg326

Korean language support package

I'm using Abobe Acrobat 9 standard, when I use typewriting for typing, error message: fixed by installing the latest version of the Korean language support package. Pls let me know where to download, thanks

where to download Korean language support package

Import package from one project into another

Hello everyone,
I have some projects.
An enterprise and war project created in netbeans.
I would like to use some files from one project to another. when I import
the package I get the error-
'package x does not exist'
I have added the package to the project but I still get the error.
I have also added the project to import to my glasspath but still.
E.g.
set classpath
.;c:\enterpriseA;
My next idea is to create a war project into my enterprise project and copy the files
from the war project into it in order to use it. But I'm sure there is a better way.
THanking you in advance.
eve
Edited by: evepokua on Nov 22, 2009 1:44 PM

One mistake I keep making is that I don't add the package to the
Dependencies of the plugin I'm writing. You have to go to plugin.xml,
and add the package you depend on to the Dependencies section. Maybe you
didn't do this?
Michael
nasti wrote:
> Hello everybody!
> I am new user of osgi and eclipse. I tried to do some of Oscar examples
> but I had some problems. Namely, the problem in import of package from
> one project into another in Eclipse.
> I add first project to the Build Path of the second one.
> I add to the first project manifest line: Export-Package example2.service.
> I add to the second project manifest line: Import-Package example2.service.
> But when I tried to execute these bundles the
> java.lang.NoClassDefFoundError was occurred. May be you will help me
> with this problem.
> Thanks....
>
>

Language Imported Package

Similar Messages

Maybe you are looking for