Language in iPod Notes. russian.

Hey.... does someone know?
Can my iPod read txt-files in non-English language in iPod Notes?
thanks for help...

Yes, use UTF-16 encoding and plain text. See this note:
http://m10lmac.blogspot.com/2007/01/your-multilingual-ipod.html

Similar Messages

  • When i use language for non-unicode [Russian] and i insert another language

    when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
    i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
    but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
    Thank you for help.My English is not good,Sorry

    that is a little-known known issue
    Check this post:
    http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
    He details how to modify the ZTIConifgure.xml file.

  • IPod not syncing on Windows or Mac

    My sister recently purchased a Macbook. I tried using her iPod to move her songs from her PC to the new Mac (as mentioned elsewhere) but it didn't work. I ended up just wiping the whole ipod and moving songs with a USB travel drive.
    When I synced up her ipod to the Macbook, I restored it to format it for Mac. The songs started to load and about 3/4 of the way through her library I received this error message.
    "Attempting to copy to the disk <ipod name> failed. The disk could not be read from or written to."
    I have tried using the "Disk cannot be read" troubleshooting page, but none of these suggestions help - it is a brand new Macbook - she literally bought it yesterday, and I have tried to use both a firewire and a USB cable that work fine with another ipod and computer. Disgruntled, I tried hooking up the ipod again, once again restoring it since data categorized as "other" was showing up on the iPod on the iTunes summary page. Once again, a few songs in we got another error message.
    "The iPod <name> cannot be synced. The disk could not be read from or written to."
    I have restored the iPod on the Macbook three times now. Each time, it goes through restore, and then when it is syncing with the music library it gives the error message as above, iTunes freezes and I have to either forcequit or manually remove the ipod.
    Giving up, I figured I'd just load the songs onto the iPod from the PC. So I reformated/restored for Windows and synced up the iPod. The first error message I got was:
    "The drive is not ready for use; its door may be open. Please check drive F: and make sure that a disk is inserted and that the drive door is closed."
    I unplugged the ipod and there was only one song on it. I plugged it back in and it started to sync only to give me this error message a few minutes in.
    "Attempting to copy to the disk <name of ipod> failed. An unkown error occurred (-53)."
    Now iTunes on the PC is frozen and I'm really confused and don't know what to do. She has an older iPod (3rd generation, dock connector) that has given her some problems over the years but nothing like this. Unfortunately, she's traveling tomorrow and really wants her iPod and music with her. At this point, neither the Mac nor the PC will load the music onto the iPod. What do we do? Also, she has Applecare for her new Mac, but it looks like the issue is with the iPod, not the computer - if I call them will they help me fix it? Should I bother trying to bring the iPod and the Mac into the local store?

    Now it gets even weirder.
    I tried plugging the iPod into a third computer (PC) which belongs to someone else. The computer restores, syncs and loads all of his songs onto her iPod perfectly fine.
    The only thing that makes sense is that there's somethng about one or more of her songs that's causing this problem. Is there anyway for me to find out which songs are doing this?

  • 1st generation iPod not recognized on Vista - drivers / hardware not found

    I have a new PC, which now very unfortunately runs Windows Vista as an operating system - I have installed iTunes latest version 7.4 but still the PC does not recognize my iPod or doesn't find the hardware - can anyone help?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • IPOD NOT RECOGNIZED BY WINDOWS...I HAVE TRIED EVERYTIHING  help plz

    i got my ipod nano 4 GB for christmas. middle of march it is already broken. my windows does not recognize ipod. i have tried everything...gone through tons of posts. no help yet........PLEASE HELP MEEEE

    Try this document.
    Ipod not recognised in "My Computer" or in iTunes on Windows.
    http://docs.info.apple.com/article.html?artnum=61711

  • Ipod not being recognized by itunes--was a few weeks ago--have not done 1.1

    hi. i have not installed the 1.10.2006 update as i've seen lots of people have problems with that on these boards. however, today when i tried to sync my ipod, the usb port did not recognize it was there and itunes was not automatically pulled up. so i could not update my music, nor could i do the new firmware install if i wanted to. those programs are not recgonizing that the ipod is plugged in.
    i've tried to reinstall itunes, that didn't help. tried to get all the windows updates, but ms couldn't verify my os is valid (it totally is). i've reset my ipod several times and would restore it, excpet the updater doesn't recognize it's plugged in. the battery is fully charged.
    i've also had problems with the ipod not turning on or off, or skipping 4+ songs when i try to just skip ahead one.
    not sure what the deal is, and i'd appreciate any help.
    thanks.

    Hi.
    You could try to restore it once more. Do you use the same computer all of the time? Do you manually sync music, or automatically sync?
    I guess you are running Windows, so iTunes could have hidden some files which didn't delete when you first uninstalled. Take a look at this:
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html
    If you do this, after you have re-installed, you could then try the disk mode if it doesn't connect.
    Vic

  • IPod Not being recognized with all the software updates

    I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
    It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
    Thanks
    20GB with Dock Connector   Windows XP  

    For "Cant mount iPod" - please try the following first
    Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    If still cant solve it then
    The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • Ipod not being recognized

    I have an ipod touch second gen. and I downloaded itunes v.10 2 weeks ago I think, and when I plugged my ipod in, it said it was being recognized as a camera and I disconnected it. Now whenever I plug it in, it's not recognized anywhere on my computer. I've tried uninstalling and re-installing itunes and I plugged it in to my brothers computer (he has v.10 too) and it worked? I did a software update hoping it would fix my problem, but still nothing. Help please?

    Connect your ipod. When you go to My Computer and look for Devices with Removal Storage. Do you see your device?
    If not, go to [iPod not recognized and Windows Device Manager is empty|http://support.apple.com/kb/TS1496].
    If it is there go to [iPod not recognized in 'My Computer' and in iTunes for Windows|http://support.apple.com/kb/TS1496]

  • IPOD Not being Recognised

    After updating my Itunes software, my Ipod is now not recognised by ITunes!
    I have been through all the suggestions, but to no avail!!!
    On top of this I have lost all of my recordings on the Ipod, the only ones left are on the Itunes software on the computer, which doesnt communicate with Ipod!!
    ANY IDEAS!

    Sorry to reply again.. I found this on another post - would you recommend trying it? (I just feel uneasy about deleting the bin file - but if you think it's okay)...
    "The recent iTunes update seems to have left many users iTunes installation from correctly detecting and synchronizing with their iPods. This problem seems to occur when the iPodService files are not updated when iTunes is updated to version 5.
    Steps to resolve the problem:
    1) Click "Start" | "Run..." | type in "net stop ipodservice"
    | click "OK"
    2) Delete the folder "C:\Program Files\iPod\bin"
    3) Run the iTunesSetup.exe installer. It will probably prompt you to either "Repair" or "Remove" iTunes. Choose "Repair" and click on next or finish.
    Optional Step 4) Click "Start" | "Run..." | type in "C:\progra~1\iPod\bin\ipodservice.exe /service"
    | click "OK"
    Optional Step 5) Restart Computer
    If these steps do no resolve the problem, please dont flame me=X
    This is not a problem with Windows XP but with the iTunes installer=)"
    This was posted by "Phrehnck" in the Topic: FIX: iPod not detected by iTunes5/"iPod Service Error" post.
    Thanks again..

  • Ipod not being recognise by any computer

    i have a 4GB nano and about a month ago it froze on me and i had to do a Menu and Enter reset to retrieve it.Since then when i try to connect the nano to any computer,a message pops up which tells me that the device has malfunction and it doesnt recognise the device.Therefore itunes dont see the ipod and i cant put any files on the ipod.Is there any solution to this problem

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Ipod not being recognized by windows computer

    I have a video Ipod and a older nonclick wheel type Ipod. Neither one will connect to my computer. Although last week they connected without any problem. Also my wife's Ipod mini connects correctly. I've uninstalled Itunes and reinstalled it. I reinstalled the drivers for the 'Mass storage usb device' in the device manager. I've reset my Ipods.What should I do next?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Ipod not being recognized by the emac

    My 20 GB photo/color ipod was not working, so it was suggested that the ipod get a new hard drive. After installing the new hard drive the ipod will not turn on and keeps returning to disk mode. When I plug it into the computer, it is still not showing up at all on itunes or my desktop. It only gives me the screen with a check mark that says OK to disconnect. What should i do to get the ipod to successfully turn on and be recognized by the computer? Do i just need a new battery?

    Hi sunsets123,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps that may help if iTunes is not recognizing your iPod classic:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • Ipod not being recognised by PC or Itunes

    My Ipod not beind recognised as a device , and when I Tunes eventually opens after an age get a unable to sync message and then it freezes.
    FRUSTRATED!!!

    Hi...
    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Ipod not recognized by itunes

    My ipod mounts on the pc, itunes does not see it. An error pops up saying that the ipod is write protected...???? I restored it, reinstalled, rebooted. Not sure what other steps to take.. Thansk for any help.

    Hello Jennifer,
    Thank you for using Apple Support Communities. 
    Sorry that your iPod isn't recognized. The following articles should help you sort out what is going on and get your iPod working again. I didn't see if you are using OS X or Windows, so I included the articles for each. 
    If you don't see your connected device in iTunes for Mac - Apple Support
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Regards,
    Jeff D. 

  • Ipod not recognized by itunes, why?

    I got a new Ipod and it is not recognized by Itunes. I have reinstalled itunes. I have tried to reset the ipod. It also does not show up on Windows Explorer. I tried changing things in the MSCONFIG file and it still did not work. The USB ports work and I have checked that by plugging in an external HD. Any suggestions?

    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows

Maybe you are looking for

  • IMessage not working when I start a new conversation iOS 6

    Hey guys, the thing now is that since I updated my iPhone 4S to iOS 6 is like the phone does not recognize my iMessage contacts. I can use iMessage, but the thing is that I only can send an iMessage if I go to my messages box and open an old iMessage

  • Make a viewer () in Photoshop

    hi, i want to develop a viewer in photoshop. idea like this: when editting something, i want to preveiw what effect is it now. click [viewer], show the picture. i can Zoom in, Zoon out, to check detail. In viewer mode, everything is read only, all ph

  • Can Labview Executables(.exe) be recompiled to source code(.vi)?

    We have lost some valuable virtual instruments(.vi's) in a hard drive crash. We do have copies of the executables(.exe's). Is there  any procedure or software available to return them to their original state (.vi's)? Please Help.

  • XI Solution for Elster

    Hi All, We are currently in the process of implementing online VAT returns for germany ( Elster ) using XI as the middleware. We have performed all the steps described in the IMG guide ( Financial Accounting (new) -> General Ledger Accounting ( new )

  • Help - how can I remove text in the background?

    I am translating a text from English into Portuguese in a document created in Germany (as .mif 7). After I inserted the Portuguese text, a ruler and the words "498 Entwurf 15.06.2011" in red and "Abstand" in sky blue started to appear in the backgrou