Language Installation Questions

Good Afternoon Experts,
I need to import Rumanian Language to my system. In SAP Library i have information on how to do so. What i can't find is information concerning the requirements regarding disk space and dbspace...
I need to know the aproximate disk space and dbspace the language import will need in order to see if with the current disk and dbspace we have we can do the import.
Is there anything else i should consider?
Regards,
Pedro Gaspar

Hi Pedro,
I wonder if Language import has a 'Test Run' available , if yes please check the same.
Regards,
Siddhesh

Similar Messages

  • HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

    Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
    forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

    First of all, uninstall it with the uninstaller.
    Then:
    Install the ENGLISH version.
    Change the language in the CC app to Korean.
    Install the Korean version. (DON't uninstall the English version)
    Change back the langauge in the CC app to English.
    When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
    Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
    If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

  • Mexico: Language Installation

    This might seem like a silly questions, but for those with Mexican companies, or operations in Mexico, what language did you install?  I installed Spanish and received a comment from the user in Mexico, who's helping me test, that the Spanish in Mexico is a different dialect than the Spanish language installation, and that for her, using English is easier. 
    There's not a Mexican version of the Spanish language that can be installed for SAP is there? 
    Thank you.
    ~TJ

    Well - especially for Spanish the differences can be pretty significant (e. g. see http://en.wikipedia.org/wiki/Spanish_dialects_and_varieties) across the world.
    Thats correct theres still a lot of dialects still widely spoken in Spain, The Spanish that is used as a standard and was inherit by people in the Americas (Mexico Included) is called "Castellano"...
    A bit more,
    http://en.wikipedia.org/wiki/Spanish_language
    http://en.wikipedia.org/wiki/List_of_countries_where_Spanish_is_an_official_language
    Saludos (Regards)
    Juan

  • Multiple language installations

    Hi All,
    Does anyone have experience of knowledge of having multiple language installations of the same version i.e. both cs6 indesign.
    For example having English, French and ME installed, deactivating and activating according to need.
    Thanks
    Trevor

    Thanks Peter, I'll probably give that a go - not too exciting.

  • Multiple language installer for Adobe Reader

    I need a compressed multiple language installer for Adobe Reader to install with my software.  Is one available?

    When we requested a license to distribute the multi-language version of Adobe Reader with our software, we recieved the following link to a download:
    "For full installers: "
    "To download the English language version of Adobe Reader 9 with Acrobat.com in compressed .exe format, click here."
    When you click on the link, you get a single file (AdbeRdr11006_en_US.exe).  This is an installation for english only.  I am looking for a single .exe file for a multi-language installation. 
    The link you provided above is to a .zip file that must be extracted and then run.  This requires additional steps in our installation process.  We were hoping you have a single installation file to prevent these additional steps.

  • Change language installation

    how can i change the language installation of adobe premiere pro cs5.5?

    I don't think it can be changed.  You would probably need to uninstall and reinstall a different language version.

  • Dutch Language Installation

    Hi,
    We have a situation.
    Initially we had English language as default language installation. Later we had a requirement to have Dutch language.
    Our basis consultant did the necessary installtion.
    Post installation when we checked the initial logon screen shows dutch language, after loggin in the left hand side ribbon menu is blank.
    menu options are blank. Similar is the case with Admin
    what are we missing here?
    Inputs appreciated.
    Thanks.

    Hi ,
    Can you please go through the below notes.
    1611477 and also 1605394 for users with the same problem for other languages.
    Hopefully this should resolve your issue. thanks.
    Regards,
    Sanjeev

  • Is language installation version dependent ?

    Is the language installation depends on the SAP version ie. if there is CD for installation of language into 4.6c system will it work on ECC 6.0 or for XI or 4.0. ?

    Hey,
    Every version of SAP system has it own localization language installation. for example, ECC6 might have some texts that
    4.6c doesn't have.
    Installation of ecc 6.0 will not work on XI 3.0 (sap will not release XI 4.0, instead they would release PI 7.0) due to the fact that most
    of the translation in ECC are not relavant in XI (for example, material number is not  an entity in XI).

  • Hungarian Language installation steps

    Please let me know, what are the steps to be taken to install the Hungarian Language in 46C environment in a non-Unicode environment?
    We are also planning to upgrade to ECC 6 and conversion to Unicode, How does this Hungarian Language installation will affect the upgrade to ECC 6 and conversion to Unicode?
    Your help will be highly appreciated
    -Al Mamun

    Hi Al,
    I assume you are having a System based on Latin-1 (Western European Code Page).
    In this case, SAP highly recommends to do the upgrade and the Unicode conversion BEFORE introducing Hungaria. Otherwise you have to switch the system to MDMP (because the Hungarian language is not included in the Latin-1 code page) and this causes significant additional effort during the Unicode conversion !
    Therefore the recommendation is:
    1) Upgrade and Unicode Conversion
    2) Installation of the Hungarian Language (which is then a standard installation according to the Language Installation Guide)
    Please also have a look at notes 79991 and 73606 for further information.
    Best regards,
    Nils Buerckel
    Solution Management
    Globalization Services
    SAP AG

  • Streamlining language installation of Tiger

    Hi,
    I am getting ready to upgrade to Tiger and would like to know if there is a way to bypass the non-english language portion of the installation. When I installed Panther it seems a lot of the install time was related to language installation. I'm not a xenophobe...I was just looking to streamline the installation.
    Thanks,
    Rick

    Hello Rick,
    I do not know of any way to stop the languages being installed - I am sure there is a way. One neat little Application that will remove the languages is here...
    Monolingual
    Also...
    Deleting all the unused printer drivers can release a considerable amount of space. I managed to " regain " around 2Gigs this way.
    Hope that helps some
    Regards
    Ian

  • Language Installation of Sri lanka language Sinhalese, Sinhala

    Dear Gurus,
    We have requirement to perform Language installation for below three languages.
    1) Bahasa , Indonesia
    2) Sinhalese, Sri Lanka
    3) Vietnamese, Viet Nam
    I am able to find separate Language CD for "Vietnamese" but i am unable to find CDs for Bahasa or Sinhalese.
    Does any one have any CD number or have performed language installation for these earlier can throw some light on same?
    Warm Regards,
    Shravan

    In fact for base ECC6 there are separate medias for some 'extra' languages...
    At least there is one for Vietnam.
    I did not found the two others. At least you can find the lang. key in note
    73606 - Supported Languages and Code Pages
    Maybe you should open a message to support with comp. BC-I18
    Regards

  • Photoshop Elements 10 Installation Question

    How can I tell if my software installed properly? The software came with three discs, and it only installed the first disc. I am new to Photoshop, and do not know if my software installed properly? Can anyone help?

    Gautham K,
    Thank you for your quick replies. I have checked,and my OS is indeed 64 bit. I have been using the 32 bit version of Adobe Photoshop Elements 10, since I installed it last evening. I have a few quick questions;
    Will I loose any functionality if I stay with the 32 bit version versus un-installing and installing the 64 bit version from disc 2?
    If I decide to un-install, and re-install from disc 2, will there be any software registration issues (as I have already registered the software)?
    Thanks again for all of your help.
    Jim
    Gautham K <[email protected]> wrote:
    Gautham K http://forums.adobe.com/people/Gautham+K created the discussion
    "Re: Photoshop Elements 10 Installation Question"
    To view the discussion, visit: http://forums.adobe.com/message/4062666#4062666

  • Installation Questions Documaker 12.3 Enterprise Edition

    We are looking to install Documaker 12.3 Enterprise Edition and have the following installation questions:
    When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side.  There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
    Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do.  Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install?  If it’s not possible, can we get a look at the documaker scripts before we run them?
    We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?

    When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side.  There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
    The typical installation scenario is to have 3 tiers - application (WAS), application (Documaker), and data. WAS tiers host web applications (Dashboard, Administrator, Interactive) as well as providing database connection pools and JMS queues for messaging - it is expected that the WAS environment is a clustered environment and that the applications are deployed to the cluster members, which can be physical or virtual. For the Documaker application server, these can be physical or virtual as well. It's recommended to install Documaker on single-purposes environments, however there's nothing to prevent you from doing otherwise. The Documaker applications are self-contained JVMs and can be tuned accordingly.
    Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do.  Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install?  If it’s not possible, can we get a look at the documaker scripts before we run them?
    The installation process (currently) writes the scripts according to responses provided during the installation process. The scripts can be reviewed/modified prior to execution.
    We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?
    The official supported version of WAS is 7.0.0.27, however WAS 8.5 may be suitable (I believe there might be a fix pack requirement there - would recommend you submit a question to Oracle Support for verification).

  • French language installation error in SMLT

    Hi experts,
    Here i have got the requirement to install FRENCH language installation in ECC and SRM environment.
    My ECC system is ECC6.0 with EHP4/NW 7.01 and SRM is SRM 7.0/NW 7.01.
    I have installed the French language installation in my ECC sandbox to test it before do it in actual Environment .I am using SMLT to install French language installation in 000 client .while doing the installation one of the transport request (Request no 5) got failed  and rest of them are installed.
    I have setup the parameters in RZ10 for Installaed languages and second language to E restarted the server .
    Users are able to login with French language ,users are able to access FI functionalitybut when the MM configuration doing they are unable to see the values inF4 (help) MM03 and MM01 tcode.It gives all starts (****************) in F4
    I have raised oss message and working with SAP..
    In parallel i need to check is there anyone faced this type of situvation in your environment while installing French language.
    Please look at the logs for the TRansport request No5:
    The below error messages are in RED for Transport Request 5
    (SAPKLFRSR1EHP4ERP6F5).
    Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
    orig. lang. is missing
    Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
    orig. lang. is missing
    Language FR for STYLE ESRINV in client 000 not imported, since orig.
    lang. is missing
    Language FR for STYLE ESRINV in client 000 not imported, since orig.
    lang. is missing
    Object imported and activated
    Errors occurred during post-handling AFTER_IMP_STYLE for STYL L
    The errors affect the following components:
    BC-SRV-SCR (SAPscript)
    Please let me know your ideas on this.
    Thanks&Regards
    Janakiram
    SAP BASIS ADMIN
    Do NOT use UPPERCASE in the subject
    Edited by: Juan Reyes on Feb 8, 2011 11:24 AM

    Hello
    Please have a look at below points
    1. any language is imported first in 000
    2. for every language some text which is not translated has to be supplemented with Englisg or German
    3. there is periodic supplementaion if new support packs or notes appled in system in future
    4. once language is in 000 it has to be copied and supplemented in all oter clients
    5. Please see that all above steps have been taken care or not
    6. I suspect since users are able to login and work in system and only some characters are shown as * ,check supplementation part
    But this is my guess .
    Please see all language related notes
    Hope this helps
    Success!!

  • Apache or Oracle installation questions

    Which discussion group is best for asking Apache or Oracle 8.1.7 installation questions?

    FRED
    Apache is best addressed on the ias 9i forum.

Maybe you are looking for

  • How to calculate number of data records in a XML output file

    Hi, After generating a XML output file from Oracle Reports, I want to calculate number of records in the XML file. Is it possible? Specifically, I want to calculate number of records for a group variable ( organization_id, which I use for bursting).

  • Why does my music not show up for my wife with family share?

    With all new devices (MBP retina using Yosemite/iPhone 6's iOS8.1): I've create my family share list with my wife.  None of my music shows on her phone, iPad, or computer.  Under Family Share on the Apple site, it suggests the ability to share and do

  • I cant get home sharing to work on 11.

    it shows up on my old computer but not on the new one im trying to sync music too. Why?

  • Conversion failed when converting the varchar value 'undefined' to data typ

    Conversion failed when converting the varchar value 'undefined' to data type int. hi, i installed oracle insbridge following the instruction in the manual. in rate manager, when i tried to create a new "Normal rating" or "Underwriting", im getting th

  • Visual C++ 6.0 Developer's Studio

    I am taking an on-line class and part of the class is creating C++ programs. The text book and I would assume the class assumes that the user has Windows and can download a version of Visual C++ is there a version for Mac? I have been searching the I