Language key not defined (CIF)

Hi experts,
currently we get an error message "Language key not defined" during the transfer of a customer from ERP to EWM (CIF - CFM1/CFM2).
Therefore no business partner in EWM is created. I read something about "One-time account" (1957563 and 1975421).
But we also have the problem for non "One-time account" customer.
How can I solve this problem?
Thanks!
Ralf

Hi Ralf
Check the SCMP tcode for comparing T002 table. with ERP client. And also check below table update method. You can maintain same record in tables and this issue is resolved.
Also about One-time account" if possible discuss with CRM consultant as BP and its factors will be decided by them.
Clarification on table T002, report RSCPLANGU and language installation
Regards
Suraj

Similar Messages

Acct determination for Account-assigned purchase order with keys not define

Hi,
I'm trying to post an IDOC of type BBPIV through XI to an R/3 system.
The posted idoc in R/3 is in status 51 (Application document not posted) with the error message "Acct determination for Account-assigned purchase order with keys not defined in chart of acts WP2P"
As per my understanding this is something related to FI.
Long text of the error is "The system cannot generate an automatic posting because there is no account determination defined for Account-assigned purchase order with keys in chart of accounts WP2P.
Correct the account determination for Account-assigned purchase order"
Please help me how to solve this.
Regards,
Rashmi

Hiya,
This looks like its a MM posting / transaction.
You need to go to OBYC and maintain the account assignment. If you provide the business scenario (GR into Stock, Subcontracting, etc.) for the process, I may be able to help.
VKOA is for SD account assignment and I don't believe you can use that here.
Cheers.

I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

JVA Cutback Error F5817 - Posting Key Not Defined

Hi Team,
I am trying to execute JVA Cutback but am stuck with the Error F5817"Posting Key not Defined". I have checked and re-confirmed the Configurations for Cutback Posting Rules with appropriate Posting Keys and also checked Configurations for Posting Key which is appropriately created in FI.
We have no clues on the above, can anyone please suggest on the same.
Thanks,
Amit

Hi,
You would also be getting the posting key number in the error message F5817 like "Posting key 01 not defined"
If yes, then check that posting key in table TBSL via SE16N.
If not, then the posting key assignemnt in the configuration is not there.
Regards,
Gaurav

Material Description in Language key

Hi all,
Is it possible to enter more than one material description per language? Or Can I create another language key and enter more than one material description in additional data in material master?
thanks.

Hi again,
I want to enter more than one discription with same language key not one for one.
f
or example ı want to create a language key like Z1
Language key .......Description
Z1 ........................Material Desc. 1
Z1.........................Material Desc. 2
is it possible?
Edited by: Nursa on Mar 29, 2008 12:39 PM

Number Key not assigned

Dear all,
In J1inmis While updating the challan i m getting error number key not defined
Please suggest
Regards

Hi,
J1INMIS is a withholding tax report.. and I think ypu are referring to J1inchln..
You have to assign number ranges for internal challan generation..Go to T-code J1INUMBER and maintain no. ranges for internal challan numbers.. But before that you have to maintain number Groups and assign number ranges to number Groups..
Regards,
SAPFICO

Unit of measure EA not defined for language RU

Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mm

Hi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

Error message :PurchOrder : Unit of measure PC not defined for language ES,

Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
Shaiek

Hi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Form of address key is not defined - Message AM117-VL02N

I have defined a COA for the customer when there is a PGI for that customer.
When I do the PGI i am getting update termination error - Form of address key is not defined.
As per the message it says that TSAD3T - TITLE is not maintained. But I see the customer master it is maintained as 'Company'.
Also when I remove the Title using XD02 also i am getting the same message.
Please let me know what settings and changes i need to do for PGI to happen.

Hi,
check in customizing what form has been assigned and check the form. It sound like somebody created a form (SAPscript, Smartforms, Adobe Forms) for the billing document and there´s no window on it for the address or it has another name.

How to populate the Language Key description is not available

Hi,
Question: How to populate the Language Key description is not available in the Customer text table
The problem is ;
Customer no : 0012345
For this Customer no description is maintained only in EN, JA ,FR from R3 side.
EN : HP International Ltd
JP:HP の国際的な株式会社
FR: Ltd International de HP
There is no value for Language ES.
BW side:
User is login into language Key ES and executing the report based on this Customer no. There is no Customer text value maintained in language Key ES. It should populate the text value empty. BW system - Language ES is installed.
I have a Reporting requirement is - I need to populate the text value for this customer No: HP International Ltd when the user login to language Key ES and execute his reports.
/BI0/TCUSTOMER Customer text table I am able to see the description for the EN, JP, FR text values.
EN: HP International Ltd
JP: HP の国際的な株式会社
FR: Ltd International de HP
If the Customer text is not available in the text table of customer for language key ES - I have to populate the any one of the existing customer text values into the language key ES - example
0012345 ES HP International Ltd
Simplest solution if we maintained ES customer description in R/3 should be ok.
Is their any other logic which I can implement in BW.

Hi,
If you are opting to load Customer Text, there are two options:
1. R/3 maintained.
2. Generic Extraction using Flat Files.
Hope it helps..
Regards,
GPK.

Language key not defined (CIF)

Similar Messages

Maybe you are looking for