Language option

Hi everyone,
Is there any function module which transforms the original english text contents to other different languages???
(or)Is there any other way to tranform these changes ???
kindly reply to this as soon as possible.

Hi,
Try with text_translate .   Let us know if it helped .
Regards ,
Varun .

Similar Messages

  • My Site Settings: Language Options not applied

    On a SharePoint 2013 Server I want that the user be able to select is own My Site Language (as SP2010).
    So, goingo to: Services Applications > User Profile Service > Setup My Sites:
    And checking in the The Language Options checkbox (Allow user to choose the language of their personal site)
    The above option doesn't result in any language selection prompt for the user on the My Site creation.
    Ideas?

    Hi falloutpt,
    Based on the following article, user's My Site will be created with default, primary language of the SharePoint Server 2013 installation on the server by default, then user can change his my site to display other language installed, it should be different
    from the SharePoint 2010.
    http://technet.microsoft.com/en-us/library/cc262500.aspx#mui
    "When enabled, users can use the multilingual user interface feature
    for their My Sites. This feature is used to display the site's user interface in a secondary language that the user prefers instead of the default, primary language that was selected when the site was created.
    By default, when a new site is created, it is created in the default, primary language of the SharePoint Server 2013 installation on the server. A farm administrator must install language packs on the server before sites can be created in languages
    other than the default, primary language.
    For My Sites, the multilingual user interface feature is controlled by the Language Options setting when you configure My Site settings. The languages that are available to users correspond to the language packs installed in the server
    farm. For more information about language packs, see Install or uninstall language packs for SharePoint 2013."
    Change and display language should also have changed in SharePoint 2013, user could display the My Site as other languages from IE language settings, which have being installed on SharePoint server.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/6bf98e09-854e-44e8-a606-4f37f37e2993/where-is-the-select-display-language-in-the-ui-of-sharepoint-2013-site?forum=sharepointgeneral
    Thanks
    Daniel Yang
    TechNet Community Support

  • Is Japanese language option available when I subscribed to Creative Cloud in abroad?

    Recently I renewed my Creative Cloud membership with full-paid one year subscription. When I bought the subscription last year, I bought it by upgrading from CS3 through discount campaign. I could use Japanese language option since my CS3 was a Japanese version. However, when I updated to CC from CS6 yesterday, all the sudden I could no longer use any applications in Japanese. Because I'm using Mac OSX 10.8 with a Japanese operating system, I need the Japanese language option particularly when editing Japanese text.   
    If anyone living in the abroad as a foreigner plans to purchase Creative Cloud membership, they should be able to use any applications in their own native language, shouldn't they? I'm really disappointed this major upgrade if this couldn't provide a multi-linguistic platform.

    Hide-sobue which country/region did you purchase your subscription?  You can find information on the type of subscription you have under your account at http://www.adobe.com/.  For information on how to manage your subscription please see http://forums.adobe.com/thread/1146459.
    Have you subscribe to a multi-language subscription or English only?

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • Would like to see a language option added to the app search filter.

    Who would like to see a language option added to the app search filter?

    You can provide feedback here
    http://www.apple.com/feedback/

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

  • Date format does not change with the Regional and Language Options in 2008

    I have a one-column report that was created using the SQL "select current_date" in postgres.  (Thinks select getdate() ).
    In Crystal Reports XI when I change the "Standards and Formats" of Regional Options to:
    English (United States)  the date is in the format mm/dd/yy
    English (Canada) the date is in the format dd/mm/yy
    Japan the date is in the format yyyy/mm/dd
    In Crystal Reports 2008 when I change the "Standards and Formats" of Regional Options to:
    English (United States)  the date is in the format mm/dd/yy
    English (Canada) the date is in the format mm/dd/yy
    Japan the date is in the format mm/dd/yy
    It doesn't change.  Is this a bug?
    Thanks in advance,
    J

    hey Jason,
    i am going through some of the old forum posts and saw that no one replied to your language options post.
    for cr 2008, there are language packs for the applicable languages. there are advantages for this as you can save installation space with the option of installing language packs for each language that you want the designer application to be in.
    you have seen the disadvantage as it doesn't work the same as before.
    you do not need the language packs for testing though. in the crystal reports View menu, switch up to the Product Viewing Locale to test objects which are using "system" settings such as dates.
    if you do wish to install any language packs so that you can change up the actual language in the designer, go to your install media. in the install files "\package\langs\" directory, you will see a folder for each language that you need. install the desired language(s).
    once you have installed a language pack and then restart the cr designer, you will now have the additional language in the View > Product Locale.
    so in summary...Product Locale will change the language of the whole designer...language packs are needed for this.
    Preferred System Locale can be used to test languages without having to change your windows system settings.
    i hope that this helps,
    jamie

  • I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

    I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

    4 possible causes of that message:
    1] Activation server is actually down. Very rare occurrence, but it does happen.
    When it does occur, down time is very short. Solution - try again.
    2] Your firewall or antivirus are blocking the connection. Solution - temporarily
    deactivate your firewall or antivirus until the update completes.
    3] Computer being used for the activation has previously been used to jailbreak
    an iOS device. Solution - use a computer that has not been used to jailbreak an
    iOs device.
    4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
    may have made changes that will prevent the iPhone from successfully activating.
    Terms of Use for this forum prohibit discussion of jailbroken iPhones.

  • Configured new language not displayed in user profile Language options

    Hi all,
    I have a requirement to add new language in portal. In that I have configured the language u201Chindiu201D in portal content translation.Now i want to configure  language options in userprofile.
    These are the procedures I have followed
    1 .On the file server navigate to
    <Installation-drive>:usrsap<SID><Instance_ID>SDM
    ootoriginsap.com com.sap.security.core.adminSAP AG<version_number>com.sap.security.core.admin.630.ear
    From here extract the com.sap.security.core.useradmin.war.
    2.In com.sap.security.core.useradmin.war file and add u201C hi = Hindi u201C in Language_en.properties
    3.Create a copy of Language_en.properties, and save as Language_hi.properties at any location.
    Now we have to do some changes with the help of configtool.bat
    So start the tool by executing.
    <SAPJ2EEEngine_installation>j2eeconfigtoolconfigtool.bat>
    Now Switch to configure mode.
    In the Tree navigate to cluster_data>>persistant>>com.sap.security.core.ume.services.
    Now switch between view and edit mode and choose yes.
    4.By right clicking on com.security.core.ume.service create a Sub node. And choose
    File-entry and upload the language_hi.properties that you have created in previous step.
    5.Create and Close the Window. And just restart all cluster nodes
                            After the above configuration, the language u201Chindiu201D is added and I can able to see the language  in self registration Language options.but it is not displayed in userprofile language options.
                            how to configure this Please help  me.            
                        These are the threads I have referred
                          How to add Hindi language in Portal
                          Regards: Add a new language (Hindi} In portal
                          How to add new language in portal
    Regards
    Bala

    Dear Markus,
    1.)  import done in SMLT
    2.)  support package parts of the languages imported
    3.)  language substituted
    4.) client refill done
    I have done 1 & 2 and also client maintenance.
    I'm not sure what are 3 & 4. Can elaborate further ?
    Thanks.
    Regards,
    Kent

  • Spell checking dont working with "Automatic by language" option

    Russian spell checking dont working with "Automatic by language" option in Sys. prefs.

    Let Apple know at
    http://www.apple.com/feedback

  • Tried Hard Reset-no language option screen appears-what to try next?

    null
    Post relates to: Palm IIIxe

    If the device is in French and after a hard reset  doesn't have a language option then there isn't any way to change the language.
    Post relates to: None

  • I enabled Arabic in Language options and it already works in Adobe InDesign. How do I enable Arabic language compatibility in Illustrator and Photoshop?

    I enabled Arabic in Language options and it already works in Adobe InDesign. How do I enable Arabic language compatibility in Illustrator and Photoshop?

    I just don't want the window to be so huge. I would like to limit the size of the window to the size of my image, exactly as in Photoshop.
    You are working on a canvas/ artboard, not within an "image". Since you can place objects arbitrarily in relation to that artboard, even by large numbers outside of it, having it display in a cropped manner doesn't exactly make sense, if nothing else, at least for being able to select content. I don't really see your problem and from my fading memory of CorelDraw and Freehand I don't remeber them doing it differently, either, nor is InDesign. You just have to get used to it. For programs that are/ were hardcopy-centric in the first place, it also makes no sense to have a background color other than white. Arguably they could allow users to change it and maybe there is already some way to do it that I'm not aware of, but it's logical to me...
    Mylenium

  • Chinese language option

    Hi my e61i was purchased in India and does not have a Chinese language option. Would appreciate any advice as to where and how this can be added to my phone. Many tks in advance.

    Help should be provided by a Nokia Care Point to add languages to your phone. There may be a small charge for this service, depending on country and warranty regulations.
    Care points/service centers and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Any other country: Click here, select your country, go to the support section, then select repair.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Japanese language option crashes in Firefox

    Hello,
    first I have updated Firefox (version 3.6.10).
    So here's the problem: after a while (can't tell you if that's a few minutes or an hour) Firefox does not offer me the language options that I have my Mac set up for (English, German and Japanese). What happens is that Japanese support/input disappears from the options in firefox and I have to restart the whole thing in order to correct for that. That's very annoying for I do write in Japanese a lot.
    This problem does not happen in Safari or generally in OS X - it's really just in Firefox that the Japanese language input support crashes...why? I have not been able to find any answers on the net .
    I will be most grateful for your help.

    Hide-sobue which country/region did you purchase your subscription?  You can find information on the type of subscription you have under your account at http://www.adobe.com/.  For information on how to manage your subscription please see http://forums.adobe.com/thread/1146459.
    Have you subscribe to a multi-language subscription or English only?

  • CS5 Chinese to English Language Option?

    Hi everybody,
    I'm an English native currently living in Taiwan, and I'd like to purchase CS5, but there are only Chinese copies available to buy.
    My question is: does the installation DVD come with an English language option?
    I've reading Adobe's specs and I guess not, but I found some posts here that suggest there's an English fallback option by placing a specially named text file in a certain location post-installation.
    Just to be clear, I don't want to use two installation languages, it's just there's no choice at purchase, and my Chinese isn't good enough (yet ) to understand all the technical interface terms.
    Thanks in advance.
    Jonti

    Hi,
    I just want to share my experiences with the above posted problems and possible solutions. Do not hesitate to correct me if I'm wrong!!! And sorry for the mixture of problems and the long post
    Lock Screen I was able to reactivate the Bubbles UI Lock Screen by changing the default language from German to English US. I really don't know why this works, but it works. Now I can see the Bubbles UI on the Lock Screen. That's a nice feature, but I'm not sure if they are able to learn. The displayed applications are not the one I use really often. We will see....
    FDD-LTE:B3, B7 MHZ which are integrated in a Vibe X2 CU version should work in Europe or in Germany, respectively. So if the phone provider supports FDD-LTE:B3, B7 there should be a 4G signal even in a Vibe X2 with a CU rom version. I haven't found a signal yet. But I keep trying. And I will improve my physical fitness by running around and looking for a 4G signal
    Theme center and Mobile assistant To my knowledge there is no simple or easy way to change the Chinese language into English language or to connect the applications to other Lenovo servers which provide the English language. At the moment possible ways to deal with the problem are:
    Wait and look for a EU rom version for X2-CU model which also supports dual-sim.
    Learn either Chinese or prepare yourself to root your phone with a new EU version (if available). But be careful you will lost your warranty if you do so and probably brick your phone if your are not competent enough to root a mobile phone
    Don't buy a Vibe X2-TO or X2-CU if your are not able to read and understand Chinese and if you would like  to enjoy the full functionality of a Vibe X2
    If you know better solutions, information's or ideas please do not hesitate to share!!! There will be many users and Lenovo friends from different markets who will be very happy!!!
    Best regards
    Lenovo Vibe X2
    32GB
    Android 4.4.2

  • Delete Language option on the login screen?

    Hi, newbie here. As the title says, how do you delete language option from the login screen. Thx u.
    Message was edited by:
    user635367

    Hi,
    It's enough to modify the instanceconfig.xml file.
    you have to properly set the AllowedLanguages tag:
    <AllowedLanguages>en, it, es</AllowedLanguages>
    Regards
    Cosimo

Maybe you are looking for