Language Pack For Microsoft Lync 2013

Hi,
Do you have any idea when will Language Pack for Microsoft Lync 2013 be released?
Thanks,

Hi EAskaroglu,
Lync 2013 is part of Office 2013, you can install the language packs for Office 2013.
There is no language pack for Lync Server 2013, you can choose the language when download the installation package.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to set up Qos for Microsoft Lyncs 2013 in cisco Switches and Router

Hi
as i am new to Qos part , please send the complete qos configuration command has to apply in my cisco 2960s switchs as well as 4506 chassis(L3 mode act as my router).
as i know from microsoft, DSCP 46 and 34 should give highest priory
please send the completed configuration for priorities this DSCP
thanks
Sujish

Hi,there,
The rule setting should be same as in Exchange 2010,you can configure it via outlook or OWA if you have full access permission. I also believe it should be something related to Repliation,would you please check the event log to see if the
AD and Exchange replication has completed.
In some cases, replication can take longer depending on how many AD sites and Exchange servers in the environment:
http://support.microsoft.com/kb/148381
http://support.microsoft.com/kb/158989
Hope these useful!
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Welsh Language Pack for SharePoint 2013

Are there any plans to provide a Welsh Language pack for SharePoint 2013? There was one for 2007 and 2010 but Welsh is not on the list for 2013 as far as I can see (http://technet.microsoft.com/en-us/library/ff463597.aspx).
Thanks
Mark Salter
Amgueddfa Cymru - National Museum Wales

Hi all, we have contracted with a Sharepoint specialist who have produced numerous welsh / bilingual web sites. They are working on a business case to Microsoft in conjunction with certain agencies and focusing on how education sales would suffer without
it. They seem to think that the likely date for release will be Q2 2014, Hope this helps, it will be too late for us and we probably won't run our intranet bilingually as a result.

Recieveing "OnUCAppointmentGetVisible" error in Outlook 2013 (64 bit) - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"

Hi All,
I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
An error occured while calling the callback: "OnUCAppointmentGetVisible"
This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
Regards,
Chris
Chris

Hi,
Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
3. Close Outlook and start it as a normal user.
Regards,
Winnie Liang
TechNet Community Support

Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003

rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003

Why my Jabber 9.2.3 Sign in like Cisco UC Integration(TM) for Microsoft Lync?

After I uninstall Cisco UC Integration(TM) for Microsoft Lync 8.6 from my computer and reinstall Cisco Jabber 9.2(3), I found my Jabber got the same interface of sign in with Cisco UC Integration(TM) for Microsoft Lync. it let me input the TFTP,CTI,CCMCIP server adress, instead of choosing the presence server and inputing the presence server address and domain.
after I sign in, it is aslo like Cisco UC Integration(TM) for Microsoft Lync, there is not the side button of contacts list, I can only search the person to call and can not send message or chat any more.
I tried many times to uninstall and reinstall Jabber,i failed, except I install Jabber 9.1(3), it works well. but I try to reinstall 9.2(3) again, it goes back like Cisco UC Integration(TM) for Microsoft Lync,why?
Thx.

Hi,
You probably had CUCILync 9.2 installed previosly, and since CUCILync 9.2 is based on Jabber phone mode, the interfaces are the same. (You have Jabber phone mode nterface now)
These settings are written in jabber-boostrap.properties file and Jabber reads them from here.
That file is stored here:
C:\ProgramData\Cisco Systems\Cisco Jabber
If you delete thise file, interface should change.
If you want to install Jabber and avoid such things, do this with option clear=1
- msiexec.exe /i CiscoJabberSetup.msi CLEAR=1 ...
Regards,
Srdjan

Hebrew Language Pack for 4.5b

Gurus,
We are into a critical issue. Need to urgently know where we can get Hebrew Language Pack for SAP 4.5b. Need to give access to users to logon in HE from the logon pad.
Do you know where can we find the files or transports to import for that?
Is anyone using bidi language (Arabic or Hebrew) on their systems for loggin onto sap version 4.5b.
If the language package cant be obtained do you know how we can switch on the RTL printing (Right Justified) printing for hebrew? At the moment it is printing hebrew but we cant seem to print it right justified.
Please reply at your earliest, lots of things are at stake.
Thanks,
Salman

Please people...can someone reply
All i can gaurantee is points here...
thanks,
salman

How to download language pack for Oracle E-Business Suite 12.1

Hi,
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?
Please guide.
Thanks,
Rohit

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

Chinese Traditional Language Pack for iPod Nano?

With my 500+ chinese songs on my iPod, it is near impossible to find a song without sorting methods. Is there a chinese traditional language pack that I can install on my iPod which provides sorting?
Thanks in advance

Hey joekor,
Language support is determined by your provider. Here is how to obtain language packs for BlackBerry:
How to obtain language packs for BlackBerry smartphones
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to install language pack for Dreamweaver CS5.5

I don't know how to install the language packs for Dreamweaver CS5.5. I downloaded and ran the update (AdobePatchInstaller) but after that when I start the program and change the language, nothing happens.

Moving this discussion to the Dreamweaver General forum.

Japanese language pack for Crystal Report 2008 SP1

Hi Team,
this is SAP Internal IT Support Center.
my id is C5101216.
just want to know that where i can download the japanese language pack for
Crystal Report 2008 SP1.
Thanks.
もし日本語のバージョンがありましたら、ぜひ教えて頂きたいですが・・・
宜しくお願い致します。
Edited by: Guanghua Li on Dec 17, 2009 9:33 AM

Japanese language pack has already been included in Crystal Reports 2008 SP1. You don't need to apply Japanese language pack individually.

Russian Language Pack for ATT iPhone

How to install and where to download russian language pack for iPhone?

You would have to hack the iPhone to do that and we can't discuss hacking here.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group 
Creator of Mac611 - Mobile Mac Support (designed exclusively for an iPhone/iPod touch)

Multi language pack for Design CS6?

Is there a multi language pack for Design CS6 available? I installed it in german, but I need it in english.

You can swap languages for a product you own if you follow the instructions at the following link:
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Language Pack for Adobe Acrobat Professional 8.0.0

Hello everyone
I installed Adobe Acrobat on a Terminal Server. During the installation i choosed the language "German". Now every user has Adobe Acrobat in German.
Now i would check is there a language pack for adobe acrobat 8.0.0 in english so the user can set their own language to use adobe acrobat.
Is that possible or is there another good possibilty?
Thanks a lot for your help

Did you install Acrobat from Acrobat Pro EFG installer? If yes, then you can change Acrobat language by following the steps below:
1. Launch Acrobat.
2. Open the Preferences panel from Edit->Preferences.
3. Go to International tab.
4. Change "Application Language" to "Choose at application startup"; click OK.
5. Close and re-launch Acrobat.
Now you will get an option to select the language when Acrobat launches. Choose English.
Hope this helps!
-Amboo

Applications 11i Release 10 CD/Media Pack for Microsoft

Applications 11i Release 10 CD/Media Pack for Microsoft
Could some one give me the minimum system configuration to load Oracle Applications 11i Release 10 CD/Media Pack for Microsoft Windows for personal use ?
I want to buy this CDS from Oracle Store .
Thanks
Naveen

You need to apply 11.5.10 Oracle E-Business Suite Consolidated Update 2 (CU2)
- Apply patch 4318672 -- 11.5.10.2 Technology Stack Validation Patch
- Apply AD patch 4229931 -- The most recent replacement for this patch is 4502904
- Apply patch 4297568 on the concurrent processing server node
- Apply the CU2 driver (u3460000.drv)
Metalink Note: 316366.1 should be helpful

Language Pack For Microsoft Lync 2013

Similar Messages

Maybe you are looking for