Language Pack Install issue?

I currently have a system with 1 single LP installed.
That system is patched with both March Upadte(kb2767999) and the December 2013 CU
I am looking to upgrade to SP1 and Sept 2014 CU.
When I tru to install SP1 for the LP, I get the message to Repair or Remove?
Is this expected?
How would you reccmomend they updates be installed?
1. Sp1
2. Sp1 LP
3. Spet CU
Do you install the binaries on all systems then run Config wizzard one at a time?(this seems like what I see most)
Do you install 1 update, run config, and then install the other and run config?
thanks
themush

Hi,
Sorry, I am a bit confused.
When a Service Pack is released for SharePoint you have to install Language service pack as well.
However, the CU for the SharePoint are containing also updates for the Language Packs.
You can Patch to SP1 directly from RTM. If you add a new server to a farm you just make sure that you have installed all needed binaries to the patch level of the Farm where you will join the server in. 
Lets say you have RTM SP Server and LP you have to patch it to SP1 (both SP and LP) in order to join the server to a Farm that is with binaries on SP1 Level.
However you can install slipstreamed versions of the product. In this case the slipstreamed installation media will include some update level.

Similar Messages

  • Iphone 3G language pack/install language pack (DANISH/DANSK)

    Hey! I somehow deleted or changed my language on the writing board... See... The language itself works, everything is on the language i want (DANISH LANGUAGE) but when i want to write somehing the language on the on the writing thing (DONT KNOW WHAT ITS NAMED. BASICLY ITS THE WHERE THE LETTER IS.) i is on english! Cause in Danish there is extra letters which is "Å" , "Ø" and "Æ".
    So i want to ask where i can get a new language pack , or how to get a new, and then install it ??

    Settings>General>Keyboard>Keyboards>Add>Add New Keyboard

  • 6300 Russian Language Pack Install Required.

    Hi All,
    I have done a search, looking for information on istalling a new language on my wives new 6300.
    We brought a new 6300 in New Zealand which uses English and Asian languages. Product code 0548156 and version 04.71 (just installed).
    I was told that we could install Russian (wife is from Russia), but have not been able to find a way to make it happen.
    I would be grateful if someone coud point me in the right direction.
    Regards Kevin.

    You can't do it yourself, but a Nokia service point can add language packs.
    Please note, however, that if you subsequently have the firmware upgraded you will revert to your original language selection and will have to start the process again.

  • Language Pack Installation Issues with STVN2.1 JAVA

    Hi,
    I was wondering if anyone has already installed the language pack for STVN2.1 JAVA.
    I installed German and French for SuccessionPlanning and JobArchitecture. The result is that I can no longer logon to both components since the logon screen will not appear due to the following error in the browser
    "Message: 'dropdownSelect_None' is undefined
    Line: 5631  Char: 21  Code: 0
    URI: http://localhost:50000/SuccessionPlanning/Scripts/masterpage.js"
    Ín the masterpage.js on the mentioned line is the following code
    if(i == 0 && (dropdownObj.needsPleaseSelect || thisOption.defaultSelected) && thisOption.value == "")
                        newItemCaption = dropdownSelect_None;
    I do not know JavaScript, but I think that DropdownSelect_None has not been declared/defined in the masterpage.js (at least I did not find a place in the coding).
    I have followed the instructions of the PDF and the readme.txt contained in the installation files. I did not receive an error during installation of the language pack and there are no entries with errors in the installation log. The error appears in IE7 as well as on IE8 on different clients. The log file of the application does not contain errors.
    Furthermore the language pack seems to be buggy itself since the admin console does not work correctly: For instance, when changing tabs in one of the languages, I receive errors that these pages are not available and that I should contact my admin, when this appears again. The names of the languages in the preference settings do not appear in German or French. Quite a lot of the terms lack translation.
    Before I open an OSS message, I thought I'd ask, if anyone of you has faced similar problems.
    Best wishes
    Daniel

    Hi Luke,
    thanks for your answer.
    I know how long an OSS message can take ...
    My hopes had been that someone in the forum has had similar problems, so that I would not have to open the OSS message, especially since our system is only for testing and not a consumer system.
    Anyway, I'll post any results after I will have found the time to open one on SMP.
    Kind regards
    Daniel

  • Language packs installed..but facing problem in translations

    Hi All,
    We are on ENH3 for Travel management.Language packs for FR,ES,PT and TR languages are installed.When i test the WD application for example for travel request by changing the application parameter sap-language from EN to any language its not working as it should be and showing up a mixture of DE and EN text.For DE it works perfectly.
    I have checked some of the OTR alias and the text translations exists for all the languages.
    Do we need to activate something for this.Any kind of pointers will be helpful.
    Regards,
    Indu
    Edited by: Indu Garg on Apr 30, 2009 11:59 AM

    Hi Folk,
    You have to maintain local language descriptions in R/3. For example if you created expense types in english language, in portal if you log in German language, the drop down of expense type  will show incorrect values. So you have to maintain local language description for each expense types. Pl let me know if you need any clarifications.
    Good luck,
    Thanks,
    Nandagopal C

  • Jam Pack install issue

    Since Jam Packs seems to not have a dedicated page, I take my chance out there:
    I got the latest SL 10.6.8 and I'm trying to install all jam packs that I have legally bought. The installation process is extremely slow (approx. 2h each DVD) and end with an error message. I've tried to create an image from DVD with the utility disk tools to avoid an installation from DVD. The process is real faster but still end with an error message. Is there a way to install Jam Packs without problems?
    Regards.

    when you put the logic install disk in, a few steps in it will ask you what components you want to install....uncheck all the components you do not wish to install...this will make it quicker

  • I am unable to type in Arabic in Word, how do i install a "language pack"?, I am unable to type in Arabic in Word, how do i install a "language pack"?

    I need to be able to type in Arabic on my macbook. I figured out how to change my typing language into Arabic but as soon as I type a word into a word document, I hit the space bar and it moves all the letters around. I was told by the help desk at my university it is because I do not have a "language pack" installed - whatever that means.
    Help!
    passiondropp.

    No version of MS Word for OS X has ever supported Arabic, Hebrew, or any Indic script.  You must use another app.  Mellel is the best.  Also TextEdit, OpenOffice, Nisus Writer.

  • Installing East Asian Language Pack Always Fails

    I need help. I've been trying to install east asian font encoder but everytime I try, it always says "failed and the installation has to abort." Can anybody help me? I tried installing once but it got deleted. Now, I can't install at all and I really need it. Please help me. My blackberry is Curve 8900. and I'm using a desktop sofeware for mac os x.

    Hi Naishdh
                            I had Downloaded and Installed an OS All Language pack  install it on my PC  getting Thai  Character and font support as well as language and input support.I think you had messed up something. Ok so let start it from begaining ,Please do exactly as mentioned :
    First of all Remove any OS packages from your PC or Laptop which you had installed .
    1.Locate and download the OS Pack having All Language  from here and Install it in your PC or Laptop Carriers
    (make sure you are downloading for the same model as you have )
    2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
        Then using desktop software perform your full backup of your device.   
    3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
        C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
        C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path       will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe. 
          After Installation of New OS I am sure you will the desired language.
    Please let us know of your results.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Office 365 with Office 2013 MSI Language Pack on Windows 7 machine.

    Hello All,
    I have Office 2013 MSI Language Pack installed on Windows 7 machine. After deploying Office 365 using ODT, Lync is crashing.
    Is Office 2013 MSI Language Pack compatible with Office 365?
    Thanks in Advance !!

    Hi,
    Have you checked the log file? Does it record the error details there?
    So you only have the language pack on your computer, not the entire Office 2013 instance? Office 2013 MSI Language Pack doesn't work with Office 365. Try to remove the language pack then try again.
    Also, to plan a multi-language deployment of Click-to-Run-based Office installations, please refer to this article:
    http://technet.microsoft.com/en-us/library/dn186220(v=office.15).aspx 
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Windows 8 installation failure with German language pack

    Hi,
    I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
    Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
    I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
    Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
    Thanks in advance for your Support,
    Ingo
    Event-Details:
    System
    Provider
    [ Name]
    Microsoft-Windows-WindowsUpdateClient
    [ Guid]
    {945A8954-C147-4ACD-923F-40C45405A658}
    EventID
    20
    Version
    1
    Level
    2
    Task
    1
    Opcode
    13
    Keywords
    0x8000000000000028
    TimeCreated
    [ SystemTime]
    2012-12-28T10:06:26.588367000Z
    EventRecordID
    2032
    Correlation
    Execution
    [ ProcessID]
    388
    [ ThreadID]
    2640
    Channel
    System
    Computer
    Lenovo-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    errorCode
    0x80070002
    updateTitle
    German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
    updateGuid
    {B9991A98-7903-4A91-B17A-818B1C1D9633}
    updateRevisionNumber
    200
    serviceGuid
    {9482F4B4-E343-43B6-B170-9A65BC822C77}

    Hi SOL
    For more information , please find the below download link.
    http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
    Thank you
    please rate all useful information

  • Display & Storage of text in Foreign Languages in BI without Language Pack

    Hello Everyone,
    We have an SAP BI system (7.0 EHP1 SP4) installed. It retreives data from an SAP ECC 6.0 system.
    Both systems have the default Language Packs installed, i.e. English and German.
    Currently there is a Rollout implementation in progress. Users are able to enter Text against Master data objects such as Vendor in other languages such as russian. It is possible to save such records and they are visible in Master data tables. Moreover, the Language Field is 'EN' . Thus it appears that ECC is able to store Russian Texts without the assistance of a Language Pack.     
    When we extract the same data into BI, all instances of Russian characters are replaced by '#'. We see this right from the PSA layer till the Infoprovider. in ECC, we are able to see the texts in russian within the Master datasource using Transaction RSA3,
    As far as I know all new SAP installations since 2007 are unicode compliant. Our system certainly falls in this category. I am also aware that Language Packs are needed when we need to have menus to be displayed depending on the logon language of the user. We have no such requirement for BI.  
    Request your help to identify if there is any additional setting in either ECC or BI which will allow BI to accept and maintain texts in Russian and other languages for which no Language Pack is installed.
    Thanks in advance
    Zubin Kurian

    But, I have always experienced this problem with Safari, thus my turning to Firefox. Now, both have this affectation.
    Are you sure it is Korean you are seeing? Do you know that language? Could you send me a screenshot (tom at bluesky dot org)? Sometimes bad fonts can cause things like this to happen.

  • 5700 hindi language pack

    Once i have a hindi language installed on my device but after updating to V5.11 the default hindi language is all gone i can see the hindi message but im unable to type it 
    + that TRANSLATION APP dosent work as i want use that hindi font for searching through the contacts
    so now im stuck ..!!
    so..
    how to add HINDI langauge in my device ..
    ANY KIND OF HELP IS APPRICIATED .!!
     CURRENT SPECS--
    V 5.11
    RM-230
    NOKIA 5700(22.01)

    The ONLY place where you can get the language pack installed is Nokia Care ..but I wonder if they too will do that for this more than 7 year old device ...
    ..and THIS shows why you lost the Hindi language  ..

  • Anna update + language packs or flashing?

    Hello I've got kind of a big question here regarding the new Anna update, but there are some doubts I have that I could not find solutions to within this forum.
    Basically I've bought a C7 from my Vodafone dealer here in Australia but to fulfill my needs I gave it to the dealer to have Chinese installed. But I'm not sure if they flashed the phone or they simple installed a language pack. I need some advice on this, and my phone versions as as below:
    Release: PR1.2
    Software: 0.14.002
    Custom version: 0.14.062.C01.01
    Language: 0.14.002.28.01
    Type: RM-675
    So any professionals here may assist me in identifying whether this C7 was flashed into some other firmware that has Chinese on it or is it simply a language pack install? This phone was bought in Australia with only English support but now it has both English and SImplified Chinese.
    Second part of my question. I know that when updating Anna the language will revert back to the original language of the phone. Now, if my phone was just installed with language pack, it will revert back to English only. Whereas if it was flashed into, say, China Mainland firmware byt the dealer, it will still support Chinese, because the phone is practically the same as a Chinese bought OEM phone. Since all Nokia phones are practically the same with only exception of different firmware for different locales. Is my theory correct? 
    Assume the phone was flashed into Chinese firmware, by updating Anna, will both Chinese and English be available to me?  
    I know this is rather lengthy for a question but, any helpful input will be greatly appreciated, as I really want to use Anna and also keep my language support. Thanks. 
    Nokia C7-00 Symbian Belle RM-675

    they might have installed a language pack.
    flashing the firmware on Chinese only, you should only see Chinese and similar languages.
    yes the phones are the same, with some exceptions where some countries don't allow GPS for example.
    giving the phone to a service center to flash it with another firmware will void your warranty. and i don't see any reason to void it.
    flashing with Chinese, only Chinese and similar languages will be available to you, you might have English, but i doubt it.
    Greece Nokia X6 RM-559 v40.0.002

  • Chinese language pack

    I brought my Nokia N97 in the UK with Vodafone.
    Can someone please tell me how to go about installing Chinese language pack to enable me to read Chinese characters.
    At the moment, the characters are displayed as square shape.
    I want my phone to act as if I brought it from Hong Kong.
    Please tell me step by step of what to do.
    thanks

    Any Care Point should be able to do this for you.
    There may well be a charge for this because the absence of Chinese support on a phone intended for the UK market where Chinese languages are not official languages is not a fault in the phone and therefore has nothing to do with the warranty.
    Note that there is the possibility that a language pack installed independently of firmware may well be wiped when you update the firmware. The product code of your phone will not be changed, which means that Nokia Software Updater is going to pull down the original software and language packs for THAT product code when it's time for an update.
    You should be able to write in Chinese after the language pack is installed, although I don't know what input method is used (probably pinyin).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Language packs seem to break spell-check language selection

    I suspect this is a bug, but maybe I am doing something wrong, so I'll ask here before submitting a bug report.
    I have Thunderbird 31.2.0 installed on OS X Mavericks. I am pretty sure it is the en-GB version, but I have several language packs installed, including the (presumably redundant) en-GB pack. I also have installed (and sometimes uninstalled) the add-ons "Quick Locale Switcher" and "Simple Locale Switcher" at various times to switch the user interface language. (The reason I have included the two is, I had the "Quick" switcher first, and suspected what I was seeing might be a bug in the add-on, so I switched to the other.)
    Now, the symptom. When the user interface language is set as en-GB, the spell-checker language choice in the "Preferences" menu (I guess "Options" in Windows, and I don't know what in Linux) is respected - I can type an email in one language, stop, switch the spell-checker language half way through, and the real-time spell-checking is then by the new language exactly as I would have expected. But, when the user interface language is anything other than en-GB (I haven't tried en-US, but I have tried German and Russian), the spell-check language follows the user interface language, and changing the spell-check language option in the "Preferences" menu has no effect whatsoever on anything.
    This problem persisted even after I removed the two language-switching add-ons. Then, I removed all the language packs (which forced my user interface back into en-GB), and magically the spell-check language selection started working again.
    So I am thinking the problem is driven by the user interface being from a language pack. When the user interface language matches the original install language, the spell-check language selection works; when the user interface language is something else, the spell-check language selection is ignored, and the actual spell-check language follows the user interface language.
    The "Simple Locale Switcher" does not seem to allow the user interface language and the spell-check language to be switched independently, but "Quick Locale Switcher" does. However, this feature doesn't seem to work, nor does switching the spell-check language through the Thunderbird Preferences rather than the add-on (unless the user interface language is the default en-GB).
    Has any one else seen a problem like this? Is there a way to fix it? (Maybe futz with the language settings on the other side of the "Here Be Dragons" warning?)

    Before chasing dragons, right click in the body of a mail in the compose window and set the spell check language there. I have no idea if it will work, but it might add to the over all body of knowledge for a bug report.
    Please post a link to any bug report you make.

Maybe you are looking for