Language preference is over riding workflow changes

In performance management module when a manager finishes their associate's appraisal and shares the finalize appraisal with their employee, the seeded notification included data in the notification that we did not want included in the notification. The notification would normally display all the appraisal details and objectives nicely laid out in the email. We modified the workflow in workflow builder to essentially remove everything from the notification except for one sentence.
This change is working correctly except for when a user goes into the user preferences and changes the default application language to something other than 'american english'. How does once stop this from happening. We have not found multiple versions of the workflow in workflow builder for each language, so i am unsure as to how we can attack this problem.
Any feedback or ideas are greatly appreciated.
Thanks

a img { border:1px solid black; }
a:hover img { border:1px solid #DA0000; }
will work in all browsers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Thytar" <[email protected]> wrote in
message
news:g9mec6$hv4$[email protected]..
> Hello,
>
> Not sure where to post this, this was the most
appropriate I could find.
> Is
> there a CSS forum on adobe.com?
>
> My problem is very simple I believe. I want to make
picture boxes that
> link to
> larger image files have a black border that changes
color when you hover
> over
> it. I used:
>
> a img {
> color: #000000;
> }
> a:hover img {
> color: #DA0000;
> }
>
> to make it work in Firefox. What do I need to do to make
it work in IE?
>
> Thanks for any help offered.
>
>

Similar Messages

  • How can I Change my Language Preference Back to English. Help!

    Hi all. 
    For some odd reason, I've been receiving all of my bills and communications from Verizon in Spanish.  Not sure how this happened, but would like to know how to reset my language preference to English. 
    Thanks!

    Welcome

  • Language preference in Safari search bar

    Hi all
    I can change my language preferences on the Google search page, but this does not carry over to the Safari search bar. Typing a search item into the Safari search bar produces results relevant to my current location. For example, I am in Germany at the moment, so get results in German. If I use VPN, I get results relevant to where that server is located. Is there any way to change the results language preference for the Safari search bar?
    Thanks

    Hi,
    Having downloaded Version 2.5.4 (v2.5.4) and attempting to run it with Safari 1.3.1 (v312.3.3) I get the error message "This verson of safari enhancer is not designed for your version of safari".
    I am in UK and would like Google UK to be my search engine in the Safari bar.
    Where am I going wrong?
    Thanks,
    Herb

  • How can I decrease my font size in mail?  I have it set to small and yet it is enormous, letters running into one another.  I have rebooted and more.  Something is over riding my setting.  Any suggestions?

    How can I decrease my font size in mail?  I have it set to small and yet it is enormous, letters running into one another.  I have rebooted and more.  Something is over riding my setting.  Any suggestions?

    You haven't mentioned which mail it is,
    If it is G-mail go to settings --> general tab--> default text style , you can change your font size & then save at the bottom of the page

  • Over-riding .LCK files on Inherited Website

    Is there any way of over-riding .LCK files?
    I’ve recently been given access to administer a
    department webpage at a university and defined a site on my
    computer - but when I accessed the server's directory I found the
    .htm files have the .LCK extension. I was able to download the
    files but am prevented from uploading any files. The original
    webperson has left and no one has any information.
    I was checking the archives and see that the .LCK is related
    to Dreamweaver's "check-in/check-out" feature which allows tracking
    of files when working in groups. But since I'm now become "the
    group", how do I over-ride this feature so I can work on the .htm
    files?
    ~CK

    Just delete the lck files on the server as I mentioned
    before.
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "Hurleyburley" <[email protected]> wrote in
    message
    news:[email protected]...
    > Unfortunately the previous person who opened the files
    and checked them
    > out did
    > not return/upload them - and didn't leave copies of the
    files to upload.
    >
    > So is there a way to access the files which have been
    locked when I don't
    > have
    > the original checked-out files to check-back-in?
    >
    >
    >
    >
    quote:
    Originally posted by:
    Newsgroup User
    > If the previous person opened the file in DW it would
    have checked it out,
    > in the process creating the LCK file. To remove this
    file DW needs to
    > check
    > the file back in. If you are using another program for
    this part of the
    > operation then you will have problems with DW.
    >
    > --
    > Paul Whitham
    > Certified Dreamweaver MX2004 Professional
    > Adobe Community Expert - Dreamweaver
    >
    > Valleybiz Internet Design
    > www.valleybiz.net
    >
    > "Hurleyburley" <[email protected]>
    wrote in message
    > news:[email protected]...
    > >
    quote:
    Originally posted by:
    Newsgroup User
    > >
    > > Thanks alot for the help!
    > >
    > > I did enable Contribute in my Remote site. I was
    able to download the
    > > files
    > > to my computer and make changes. When I tried to
    upload the updated
    > > .htm
    > > files
    > > I got an error message saying "Encountered 1 errors
    (sic) during the
    > > transfer."
    > >
    > >
    > > Due to security reasons our university permits file
    transfers using a
    > > product
    > > called SSH Secure File Transfer Client. Does using
    the SSH FTC product
    > > instead of Dreamweaver's FTP connection create a
    problem for the .LCK
    > > check-in/check-out feature? Or is there something
    else that needs to be
    > > addressed?
    > >
    > >
    > >
    > > You need to NOT do this. Have you enabled
    Contribute in your Remote
    > > site
    > > definition?
    > > --
    > > Murray --- ICQ 71997575
    > > Adobe Community Expert
    > > (If you *MUST* email me, don't LAUGH when you do
    so!)
    > > ==================
    > >
    http://www.dreamweavermx-templates.com
    - Template Triage!
    > >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    > >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > >
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    > > ==================
    > >
    > >
    > > "Hurleyburley" <[email protected]>
    wrote in message
    > > news:[email protected]...
    > > > Is there any way of over-riding .LCK files?
    > > >
    > > > I?ve recently been given access to administer
    a department webpage at
    > > > a
    > > > university and defined a site on my computer -
    but when I accessed the
    > > > server's
    > > > directory I found the .htm files have the .LCK
    extension. I was able
    > > > to
    > > > download the files but am prevented from
    uploading any files. The
    > > > original
    > > > webperson has left and no one has any
    information.
    > > >
    > > > I was checking the archives and see that the
    .LCK is related to
    > > > Dreamweaver's
    > > > "check-in/check-out" feature which allows
    tracking of files when
    > > > working
    > > > in
    > > > groups. But since I'm now become "the group",
    how do I over-ride this
    > > > feature
    > > > so I can work on the .htm files?
    > > >
    > > > ~CK
    > > >
    > >
    > >
    > >
    > >
    > >
    > >
    >
    >
    >
    >
    >
    >

  • Audio preference switches over after 20 minutes?

    I use system preferences to switch between sound outputs usually from internal Macbook Pro speakers to external sound card. After selecting the sound card in the preferences list there is no change ie sound continues to come through the Macbook Pro speakers. After twenty minutes or so there's a bit of crackling and the output finally switches over to the external sound card. Very weird - the worst case of latency I've ever experienced.

    With this exact model I would have to see it could very well be a false contact. Turn on the computer and tap around the mousepad and see if the computer turns off rapidly. When the computer turns itself off in this manner, is the power/battery light blinking orange? If it is the motherboard has went into protection mode and is likely as stated before. Take it to a qualified toshiba technician to have them take a look at it because the technique to resolve this problem on the SP6100 is sorta detailed and would need a more experienced technician to pull off.

  • Language preference won't revert back on e-mails and texts

    I changed my language preference to French under settings/general/language&region, to test a French app and later reverted back to English. This somehow has affected my e-mails and texts and now my e-mails and texts language (spell check) is french. I've verified the language setting and it is English . . .Apple support wants to charge me $35.00 for the priviledge of telling them they have defects in their product.
    Any help here would be appreciated.

    spellcheck is determined by the keyboard setting (not language).  Tap the globe key and switch to English.  Or go to settings/general/keyboard/keyboards and delete the French keyboard which was probably added when you played with the French language preference.

  • Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

    Hi Friends,
    We are in a phase of data migration from 11i to R12 
    I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
    Condition for open POs is PO qty-received qty=>0
    critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
    in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
    the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12) 
    Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
    Or Please advice best solution.
    Thanks & Regards
    Giri

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • My friend changed the language on my phone I then changed it back to english, and for some apps I download it is in a different language, i have tried restoring my phone and it is still doing this, know how to help?

    My friend changed the language on my phone I then changed it back to english, and for some apps I download it is in a different language, i have tried restoring my phone and it is still doing this, know how to help? It only seems to happen for some apps and I have spent a long time trying to fix it.

    Oops...my phone is running 6.0.1

  • I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things  to do this but I cannot figure it out. thanks

    I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things  to do this but I cannot figure it out. thanks in advance.

    Thats the problem I bought it from a very large thrift store. i went back asked the person where I bought the computer he said we can not give you the password. I thought buying it there was a good idea because not only was it a nice deal but it was like I was maknig a donation. I know that i messed up because i do not have the installation disk. I bought it without thinking. Until recently I was still using an old G4 9.0 os. I guess you can say I have been out of the loop for a while.

  • Problem after over riding paintComponent() method

    I am over riding the paintComponent() method for a button to show the text in 2 lines. But when I invoke setEnabled(false) on the button, the button is getting disabled but the text is not.
    Could any one please let me know how to do that.
    The code for the paintComponent() method is pasted for reference
    protected void paintComponent(Graphics g) {
    super.paintComponent(g);
    Graphics2D g2 = (Graphics2D)g;
    int w = getWidth();
    int h = getHeight();
    FontMetrics fm = g.getFontMetrics();
    int textw1 = fm.stringWidth(text1);
    int textw2 = fm.stringWidth(text2);
    FontRenderContext context = g2.getFontRenderContext();
    LineMetrics lm = getFont().getLineMetrics(text1, context);
    int texth = (int)lm.getHeight();
    prefHeight = texth;
    int x1 = (w - textw1) / 2;
    int x2 = (w - textw2) / 2;
    int th = (texth * 2);
    int dh = ((h - th) / 2);
    int y1 = dh + texth - 3;
    int y2 = y1 + texth;
    // Draw texts
    g.setColor(getForeground());
    g.drawString(text1, x1, y1);
    g.drawString(text2, x2, y2);
    regards,
    shantanu

    Hi,
    Thanks for advices, I solved the problem...it was simplier than i thought. When the g.drawImage(.... is called ) i just added Thread.sleep( time ) after that line. This gives the sound therad time to play the sound without interrput and time to main thread to handle the image. All works now pretty much as i thought, except when JFrame is overlapped the image is not drawn again...this can be corrected ( maybe?)by adding windoslistener and implement the methods in that inteface and make some repainting in different situations. But cause you gave me the magic work Thread priority I hox! the problem, so here goes 10 duke dollars.

  • I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

    I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

    Have a look at your service options here: Apple - Support - Service Answer Center
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
    iPhone Model
    Out-of-Warranty Service
    iPhone 5
    R$ 649
    iPhone 4S
    R$ 549
    iPhone 4, iPhone 3GS,
    iPhone 3G
    R$ 449
    Prices applicable for Sao Paulo. Prices may vary by state due to local ICMS tax. All fees are in Brazilian reais and include tax.
    Since your phone is out of warranty, you'll have to pay for your device being replaced.

  • Overal Result is changing when drill down the char - report is having cond.

    Hi ,
    we are running one report, the overal result is changing by drill down one char. if we remove drill down  the same char. then it is displying the original value.
    Note: we have one condition on the report. in the _Characterstiv Assignment tab_  the radio box Individual chars and Chars. combinations is selected.
    can any one please sugest us, how to get the same result even though we dril down the other chars.
    Thanks in Advance,
    Raju

    Hi Gangaraju,
    If i am correct, the key figure column for which the total is changing is having the property set as "Calculate result as :Total"  at query designer level.
    If you want to display the same total irrespective of the drilldown of the characteristics then remove this property from the keyfigure in Query Designer .
    Then you will see the original total irrespective of the characteristic being taken for drilldown.
    I hope the above reply was helpful.
    Kind Regards,
    Ashutosh Singh

  • OU Group Policy over-riding User Group Policy

    I'm using ZfD 4.01 ir7 and have a restrictive Group Policy applied at the
    OU level. I've created a less restrictive Group Policy and assigned it to
    a user within the above mentioned OU but the settings are not
    taking...the OU Group Policy is over-riding the user Group Policy. The
    appropriate rights have been assigned and this configuration is working
    for other users/OUs in the tree. I've run a dsrepair against this
    partition and no errors were reported.
    Any suggestions to resolve this would be greatly appreciated.
    Ryan

    Paulr,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
    To unlock this limitation, do the following:
    1) Type “about:config” at the address bar
    2) Search for “services.sync.syncInterval”
    3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
    4) Close and restart Firefox
    The Sync action will now trigger at the interval you just set.
    from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

Maybe you are looking for

  • How to change the display of Hierarchy in EVDRE

    I want to change the display of the hierarchy  as first child and then parent. instead of first parent then child. I mean when i see the report, I have to see the values for the members and then node total . How can i achieve this ?? Thanks in advanc

  • Unable to find TUPEL attribute in ppoma_crm

    Hello All, We are implementing SAP CRM 7.0 Version enhancement pack 2.0, in ppoma_crm we are not able to see the attributes like TUPEL or division or distribution channel, please advice. I am pasting screen shots of my ppoma_crm The relevant Sales Or

  • Cannot click on anything on web page

    Hello - I'm having trouble with my Safari and wondering if anyone can help. The top of my screen where the web address is has a normal background. I can typ in a web address and it will take me there. However, once the page is loaded, I cannot click

  • Delivery posting

    i am using IDOC_INPUT_DESADV1 for updating Purchase Order Confirmation Tab Details. I dont want to create a Inbound Delivery for that. I only need confirmation details but not inbound delivery. Can anyone help me out ....

  • Upgrading to Java 1.4.1 on OS X

    On http://www.apple.com/java/ they state: The Java 1.4.1 Update 1, now available from software update, improves stability, memory usage, and correctness. Requires Mac OS X v10.2.6 or later. Following the link one is directed to: http://www.apple.com/