Language problem on import

hi everyone!
i ve oracle 10g2 XE Universal already installed on my pc.
i changed NLS_LANG in registry in GREEK_GREECE.EL8ISO8859P7.
i am trying to import a file in XE that i exported from oracle 10g2EE (charset AMERICAN_AMERICA.EL8ISO8859P7).
import done but with many warnings. i ve also this message:
import done in EL8ISO8859P7 CHARACTER SET AND AL16UTF16 NCHAR CHARACTER SET
import server uses AL32UTF8 character set <possible charset conversion>
when i go to run my application i take this message:
Database server error ORA-01756 QUOTED STRING NOT PROPERLY TERMINATED.
i guess that the problem with the language did not be solved changing the NLS_LANG in registry.
Can anyone help me?

Some update to detail the problem after further investigation.
Any idea is appreciated.
On EBP when we try to make a search for the available values we get "page cannot be found" error. This error occurs only if we login to EBP in a non-English language, i.e. either Turkish or Russian.
We don't get this error on all search helps but with the ones that have a non-latin character in the link. On the other hand the problem does not occur in all the links with non-latin characters. Some of the links with non-latin characters are working correctly.
Steps for the Reconstruction
1. Login to EBP in Turkish
2. Goto Process GOA/"Genel çerçeve sözleşmesini işle" under Contract Management
3. Create a GOA
4. On the initial screen of the GOA creation click on the "binnocular" at the line of under-over delivery tolerance/"Tsl.açığı/ fazlasıtoleransı"
5. Since our SRM server is on SSL Internet Explorer first asks for displaying the non-secure items. The actual problem is that the link contains non-latin characters. You can see the link by clicking on and not letting the binnocular.
6. However when you go down on the same page to the binnocular for the vendor/"Satıcı" search you get no errors. Because the non-latin characters are converted to ASCII codes.
I have also opened an OSS note on that.
Regards
#Bill J.

Similar Messages

Problem while importing Chinese traditional - ZF language in ECC system

eHello All,
I am in process of importing Chinese traditional language - ZF to one of our ECC system. For installing I am following below steps:
1. Executed SMLT
2. Classify --> Saved ZF - Chinese traditional language
3. Imported support package.
4. Then Select language u201CChinese trad.u201D And Goto Language --> Special Actions --> Import Support Packages
while i am doing 4th step and importing support packages, For some of the old support packages the status is "Not found" as they are not there at OS level. (Ex: The status "Not found" is there for SP SAPKH60001 - SP 01 for SAP_APPL 6.00. While our system is at SAP_APPL version 604).
While i am deselecting this component it's giving me following message:
You can only exclude files from the import at the end of the list.
The Support Package import is incomplete. Continue the import with the missing
files.
Can anyone please do let me know what has to be done to resolve this???
Reagrds,
Nirav

Check
Note 1068483 - Language import and EhPs (Enhancement Packages)
And also
Note 1479911 - OCS import imports too many Support Packages
Markus

Language problem in JSP please help

Hi all java guru;
Altough I tried all different way I can not solve the my problem.
My problem is Turkish language problem in JSP.
If my jsp page use database applications such as push or pull data to my SQL 2000 database or call some datas from database, some data which contains turkish caracter are seen wrong. suc as �� is to ??????
what is the problem?
But important point is that; this is only Database data which come from sql database. But I can see JSP data or HTML data truly.
I try different method to solve in JSP page;
1-request.setEncoding("iso-8859-9");
or
request.setCharacterEncoding( "windows-1250" );
2-
@contentType="text/html; charset=iso-8859-9"
@page pageEncoding="iso-8859-9"
3-
<meta http-equiv="Content-Language" content="tr">
<META http-equiv="Content-Style-Type" content="text/css">
4-
ISO-8859-9 is turkish charecter spefications
String TR_tlp = new String(NEW_TALEP.getBytes(),"ISO-8859-9"); // this parm is inserting database but problem is go on.
5-
for the database...
Properties props = new Properties();
props.put("user","login");
props.put("password","password");
props.put("charSet","UNICODE");
6-
url= "jdbc:microsoft:sqlserver://IP_NO:1433;databasename=database;TRUSTED_CONNECTION = true;CHARSET="+sun.io.ByteToCharConverter.getDefault().getCharacterEncoding();
or
url= "jdbc:microsoft:sqlserver://IP_NO:1433;databasename=database;TRUSTED_CONNECTION = true;CHARSET=ISO-8859-9"
con= DriverManager.getConnection(url, kulad, sifre);
I am using tomcat 5.0.19,
is there any way to solve this problem... Please help......

Were you ever able to solve your problem?
I have a similar problem.
My database is storing the characters correctly and they can be viewed in Java, but when I try to convert them to unicode using:
String inputUtf8 = new String(input.getBytes(),charset);
it works for almost all characters, but some come through as noncharacter "boxes."
The characters that come through as boxes in iso8859-1 are the ones that are in the "supplementary" character range of that set, such as:
- curved left and right quotes
- "TM" symbol
- bullets
- m dash and n dash
(see this table: http://www.csgnetwork.com/htmlchrset.html for a more complete list of the supplementary characters )
Any idea what I need to do to have these characters show up properly?

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problem During Importing using DBMS_DATAPUMP

Hi,
I am facing Problems while Importing usinf DBMS_DATAPUMP:
Its not showing any Error but the Tables not getting Imported.
Below is the Code whihc i have written for Import:
CREATE OR REPLACE PROCEDURE Data_Pump_Import_Load AS
ind NUMBER; -- Loop index
h1 NUMBER; -- Data Pump job handle
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
sts ku$_Status; -- The status object returned by get_status
BEGIN
-- Create a (user-named) Data Pump job to do a schema export.
DBMS_OUTPUT.PUT_LINE('COMES HERE');
h1 := DBMS_DATAPUMP.OPEN(operation => 'IMPORT', job_mode =>
'TABLE',job_name => 'RET_IMPORT_TEST');
DBMS_OUTPUT.PUT_LINE('COMES HERE1111');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEXPORTTEST.DMP', DIRECTORY => 'EXPORT_DIR',filetype=>1);
DBMS_OUTPUT.PUT_LINE('COMES HERE2222');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEIMPORTTEST.LOG',DIRECTORY => 'EXPORT_DIR',filetype=>3);
DBMS_DATAPUMP.SET_PARAMETER (handle => h1,
NAME => 'INCLUDE_METADATA',
VALUE => 1);
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'DATA_ACCESS_METHOD', VALUE =>'AUTOMATIC');
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'TABLE_EXISTS_ACTION', VALUE =>'REPLACE');
DBMS_OUTPUT.PUT_LINE('COMES HERE3333');
-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.
-- Start the job. An exception will be generated if something is not set up
-- properly.
DBMS_DATAPUMP.START_JOB(h1);
-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
percent_done := 0;
job_state := 'UNDEFINED';
WHILE (job_state != 'COMPLETED') AND (job_state != 'STOPPED') LOOP
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
IF js.percent_done != percent_done
THEN
DBMS_OUTPUT.PUT_LINE('*** Job percent done = ' ||
TO_CHAR(js.percent_done));
percent_done := js.percent_done;
END IF;
-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.
IF (BITAND(sts.mask,dbms_datapump.ku$_status_wip) != 0)
THEN
le := sts.wip;
ELSE
IF (BITAND(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
THEN
le := sts.error;
ELSE
le := NULL;
END IF;
END IF;
IF le IS NOT NULL
THEN
ind := le.FIRST;
WHILE ind IS NOT NULL LOOP
DBMS_OUTPUT.PUT_LINE(le(ind).LogText);
ind := le.NEXT(ind);
END LOOP;
END IF;
END LOOP;
-- Indicate that the job finished and detach from it.
DBMS_OUTPUT.PUT_LINE('Job has completed');
DBMS_OUTPUT.PUT_LINE('Final job state = ' || job_state);
dbms_datapump.detach(h1);
END;
/

Use metadata_remap proc with REMAP_SCHEMA option:
DBMS_DATAPUMP.METADATA_RAMAP(id, 'REMAP_SCHEMA', 'SOURCE_SCHEMA', 'DESTINATION_SCHEMA');

Problem in Importing in configuration.

Hi All,
I am facing a problem while importing the configuration object saying that "UNABLE TO CONNECT TO SLD".
Can you please let me know if i need to check anything , or anyway out.
thanks,
JAY

Thanks a lot for all your valuable suggestion.#
I have checked the SLDCHECK it is perfectly all right as expected with most of the things in gree and there is no red mark showing in from the perticular transaction, so also the SLD part is also opening perfectly as expected.
what next ... i am not findng any clue to progress.
thanks,#
JD

Problem in importing from dmp file

Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul Chougule

I tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do .

Problem in importing package

i am new to java and facing problems in importing package which are self made.
secondly does JDK 1.1.3 can support swing

Hi,
I had some problems myself. I will add few lines, maybe it helps:
OK, let's assume that you work in a directory. In this case, set classpath to this hierarchy as well as to "." ('this' hierarchy - like in DOS).
Now, assume that you want to use packages MyPack1 and MyPack2. The source files of classes belonging to MyPack1 must:
- start with command
package MyPack1;
- be located all in the directory MyPack1
(and the same for MyPack2, of course)
If you want to use MyPack1 within MyPack2, you have to include:
import MyPack1.*;
even though MyPack1 is, in fact, located on path: ../MyPack1/*
(trust the classpath is important here)

Problem in Importing Configuration object

Dear All,
I am facing the problem while importing ID object.
Business system INTEGRATION_SERVER_XIP is not assigned to a business system group with the ID (XISystemGroup).
So , I just try to create a Group in Business System in SLD. But I could not find the option to create the System Gourp.
I could n't see <b> edit groups </b>
any clue..
Regards
Danab

Hi,
First, you have to start the SLD.
To create a group, proceed as follows:
> Business Systems
> Click on the drop-down next to Group and select Edit Groups
> Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
To assign business systems to a group, proceed as follows:
> Business Systems (Group = all)
> Select your Business System
> Click on the Integration tab.
> Select the related Integration Server (which is associated with a group - see step 1)
To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
> Business Systems
> Select the group of your choice
> Select your Business System
> Click on Transport
> Click on Add/Change Target
> Select the Target Group and System
KR, Danny De Roovere

Language problem on import

Similar Messages

Maybe you are looking for