Language question after update new firmware 200.21...

Hello,
I would like to update my Nokia E71-2 (code 0569371 RM-357) to the latest firmware v  200.21.118, but before I do it, i want to know about which languages it contains in this firmware, dose it contains the French language?
Thanks very much for your help

The firmware update will contain a language pack specific to the region your phone is coded for.
So if your phone was bought in france from a reputable french retailer, then it should have the appropriate product code and french should be included in the update

Similar Messages

  • Can't connect to internet after updating new Firmware wrt54g Help please!

    So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

    I am having the exact same problem..  I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help..  It says if you can't access the web based page then to use the TFTP  utility to re-flash the router’s firmware but it seems it cannot make a connection to the router..  I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router..  I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well..  So what gives?  I followed the directions  but the only thing I seemed to accomplish was to brick my router..   Does anyone have a clue on how to go about fixing this problem?   Any help is appreciated.. 

  • E65 not start-up after updated new firmware

    Hi,
    Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
    Could any one help me to make my phone back to work, please ? Thanks a lotttttt

    Try the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
    This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.
    You will need to restore your data after this.

  • Double NAT error status after updating to firmware 7.1

    This may be a bug. My Airport Extreme was working perfectly, but after updating to firmware 7.1, with no other changes to configuration, it is now reporting a Double NAT error. Both wired and wireless clients still have access to the WAN and each other, so everything still works. I know I can ignore the error, but I wonder if anyone else has seen this issue?
    I have a possibly unusual setup -
    My DSL modem creates an address of 192.168.1.47 and hands that to the APE as its WAN address. I've configured the APE to hand out addresses to its client machines on the LAN in the 192.168.2.x range and it does that correctly. So there is no actual conflict - the WAN address is 192.168.1.47 and the client addresses are all in the 192.168.2.x range. Could the new software be assuming that the 192.168.1.x range is the NAT range without verifying the actual range is really 192.168.2.x? Seems unlikely, but it appears to be the case.
    Any insights on this appreciated....
    mac mini   Mac OS X (10.4.9)   my Airport Extreme is less than a month old

    When iTunes attempts to sync photos from iPhoto, it shows the amount of the iPod drive taken up with photos, BUT NO usage on the drive graph itself.
    When Sync Photos from iPhoto is deselected and another sync attempted, iTunes asks if photos should be removed from iPod, despite the previous sync being unsuccessful. When I choose to remove the photos, the amount shown taken up by photos disappears.
    Does anyone know what the error message quoted in my question above means?
    iBook G4 1Ghz/iMac G5 iSight   Mac OS X (10.4.3)   iPod Photo 40GB

  • Contacts sort order after updating to firmware 051...

    I am just after updating my E52 with 051.018 Firmware. Before firmware update I done my contacts like this: 01 Val, 02 John, 03 Dad etc... so that when I selected contacts the numbers I most used/dialled come up at the top of the list but now after updating my firmware the contacts at the top of the list are those starting with A  - I have tried going into settings and choosing the order of first name last name but its still the same. I suppose a workaround would be to edit my contacts so that 01 Val becomes AA Val and 02 john becomes AB John but I would really like to keep them as before I updated the firmware if anyone knows a solution. Many thanks,
    Andy.

    The problem was solved. It apparently had to do with DNS server settings. I subscribe to Unblock-US here in Canada, and that messed up communication between the Bravia and the Sony servers. I have my DNS settings set on the router level, so what I had to is to simply bypass the router settings by setting new DNS addresses on the Bravia itself. I used the Google DNS for the Bravia:
    8.8.8.8
    8.8.4.4
    Of course, with this configuration, I can no longer access US content on my Netflix on the Bravia television. What I find strange is that this was never a problem prior to the update, so I guess Sony is locking down on geoblocking with this latest update.

  • My problem after N73 New firmware

    Dear All
    V 4.0727.2.2.1
    Hello
    i have a problem after i pdate my firmware for Nokia N73
    the problem is: before When I started to make a call the counter appear on the screen and when the other side open the line the counter start the count the time. This is useful to see the call time during the call process
    But after the new firmware I did not find this service and I can not fix it.
    How I can fix it?
    Also, how I can back to the old firmware?
    Is there a program to do the same service?

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Connection lost while update new firmware for E71

    When I update new firmware for my E71 by OVI suite but after finished download and its step to prepare to install then it lost connection.
    I restart my phone for many times, then it allowed us to process for next, when i click next then suddenly its disconnect USB, when wait for a few minutes then its allowed process next.
    Mean that, its always disconnect USB when i click next to installing. please see attach file.
    Please help me, what happen with this installing new firmware?
    Thanks
    Attachments:
    lost connect.pdf ‏238 KB

    @lyjammy
    Not quite sure from your post whether E71 still functional upon previous firmware and just fails to update every time that you try; if that is the case it may be easier to find another PC.
    Happy to have helped forum with a Support Ratio = 42.5

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • My iPhone 5 hanged after updating new software version

    My iPhone 5 hanged after updating new software version

    paulette3163 wrote:
    When I plug my phone into my laptop and open itunes,
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • I find Mail under Mavericks to be weird. Are others having this same difficulty. "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

    I find Mail under Mavericks to be weird. Are others having this same/similar difficulty? "Upgraded" to Mavericks last week, after updating the firmware to my WD external HD.

    "Weird" needs further explanation.
    Google's highly nonstandard IMAP implementation is weird, if you're using Gmail, though Apple bent over backwards to accomodate it. Other than that, what do you mean by "weird"?

  • Can't access internet after updating to firmware 7.3.1

    After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
    I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
    I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

    Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
    In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

  • Problems with Audio after update to Firmware 2.1

    Dear Blackberry users
    Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
    Pairing is okay, but the audio stream comes with no volume.
    Urgent help would be welcome . Thank you.
    Clemens Heddier/Germany

    I dont have my BT gateway with me but will test tonight.
    Have you tried removing the pairing and pair it again?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • After updating the firmware on IOS7 I can not activate my iphone 4.

    After updating the firmware on IOS7 I can not activate my iphone 4. Itunes says "Unlock the iPhone on this ***** @ *******. ru impossible"

    ITunes says:
    At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
    Unlock iPhone on this I ***** @ ya *****. Ru impossible.

  • Camera problems after updating 8100 Firmware to v4.5

    Hi All
    This is a known issue to me as I update all our work handsets with Blackberry firmware for the company I work for.
    After updating the firmware on several handsets to the latest 4.5 version of the Blackberry 8100 there is a problem with the camera.
    When you are in view mode and outside (even whilst overcast) the screen goes white as if the aperture for the lens is open wide.
    Even when you take the picture the result is whiteness everywhere.
    Please see examples here:
    http://www.imagedump.com/index.cgi?pick=get&tp=540100
    and
    http://www.imagedump.com/index.cgi?pick=get&tp=540101
    Both of these pictures were taken indoors with just flourescent lights on.
    However if I return the firmware to a lower level the problem no longer exists.
    I have tried changing the white Balance settings on the handset and no matter which setting I put it on the same results occure.
    I was wondering if there is a patch or do I have to wait for the next version for a bug fix?
    Thanks for your help in advance.
    Gadget
    Solved!
    Go to Solution.

    Upgraded the handset software to 4.5.0.55 and the camera problem no longer exists.
    Can I get Kudos for solving the problem myself?? LOL
    Gadget

  • After update new OS 10.10 can't detect camera

    after update new OS 10.10 can't detect camera

    Hi..
    Try the troubleshooting steps for the built in iSight camera here >  How to Troubleshoot iSight
    iWork software must be purchased from the App Store.

Maybe you are looking for