Language selection with SAP SSO

Today I was asked by a user how will they select the system language with single sign on. Currently as people authenticate to the system, the system is in English by default.
Is there a way to allow users to select the system language they want to use with Single sign on ? How ?
Thanks and regards, Fabio

Hello Fabio,
From the NWSSO perspective, customer's can configure their Secure Login Client to login in other languages too by setting the windows registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\SAP\SecureLogin\common]
The STRING Locale will set then the language. Possible values are:
en_US (English)
de_DE (German)
fr_FR (French)
it_IT (Italian)
ja_JP (Japanese)
pt_BR (Portuguese)
ru_RU (Russian)
zh_CN (Chinese)
-> This is described in section 4.3 From the Secure Login Client (NWSSO1.0 release) or section 5.1.1.1 from Master Guide (NWSSO2.0 release).
I hope this clarifies.
Best Regards,
Guilherme de Oliveira.

Similar Messages

Can't get past language selection with Leopard Install disk

My 1 year old Intel Mac Mini, which had been running 10.5.4 without problems suddenly froze up. The mouse was still active but I couldn't click anything. I turned the system off with the power button. When I restarted it got as far as the login screen, but clicking the user didn't do anything. I was able to log in using safe mode (hold down shift when starting). I ran the disc utility, repaired permissions and verified the disc. Seemed OK, but still the same behavior (freeze at login screen) when I try to boot normally.
I tried booting from the Leopard install disk. When it reached the language selection page there were some strange-looking horizontal lines in the display. Clicking the "proceed" button caused a copy of the button's graphic to appear at the top of the page and nothing else happened. Very puzzling, since I had upgraded OS X using that same disc.
I have a Superduper backup from a couple of weeks ago. It won't boot up normally either. Any ideas? Unfortunately, I'm 2 weeks out of warranty!
Thanks,
jwstex

I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
Make sure no external drives or other unnecessary connections.
If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
http://support.apple.com/kb/HT1379

User Field Selections with SAP Asset Report RAGITT_ALV01

Hi,
We are running RAGITT_ALV01 (Asset History Sheet) report and wish to utilize some user fields (ANLU) in data selection. How might this be done? I find when using "List Assets" under "Settings" tab the asset number , sub asset numbers and associated user fields remain. However when using "Main Numbers Only" or "Group Totals Only" under this same tab, sub asset number and associated fields are not to be found and accumulations already include all assets with a given asset number with no opportunity to apply user field data selection criterion which would eliminate some assets included .
Thank you for your time, harold

Hi,
Sorry to have taken so long to reply, and thank you for suggestion. We already have our "Z" copy of this program and have been processing from this for some period of time. The problem occurs when trying to apply user fields (ANLU) to data selection criterion for reporting options "Main Numbers Only" and "Group Totals Only". Asset numbers (main and sub) disappear during R3 data base processing never to be seen intact again. Have traced this through and may have solution for "Main Numbers Only" option. Testing is occurring on this "work around". However the third option "Group Totals Only" solution still evades capture. If you have any more ideas please pass along to me. Again thank you for your time and effort. harold

SSO with SAP logon tickets to non-SAP web app

I am trying to implement SSO to an oracle portal based web application using SAP logon tickets, but can't seem to find a way for it to work. I thought maybe it would be a web server filter, but am unsure if this would work for oracle portal. Anyone tried similar?
Cindy

Hi Cindy,
If it is EP6 SP2 probably you can checkout the following document.
http://service.sap.com/ep60
Go to Documentation Help>How-To-Guides>Current How To Guides section.
checkout the following how to guide.
Perform Cross Domain SSO with SAP Logon tickets zip file.
If you want the zip file please send an e-mail to
[email protected]
Regards
-Venkat Malempati

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

I need a report in SAP which allows multiple Profit centers selection with

Hi,
Cany anybody help me with below issue -
I need a report in SAP which allowing multiple Profit centers selection with :
- Profit Center #
- Profit center Name
- Profit center long text
- Profit Center group
- the related PC node showing the BU and the product category group.
Let me know is there any report which can provide us with all this details.
With regards.

Hi,
I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
There are several reports which allow entering profitcenter groups or profitcenters.
Long Text is not possible. Makes also no sense to report on Long Text.
Best regards,
Andreas

CA with SAP FICO and Japanese Language

Hello Friends,
I am Kapil studying ( final group ) to become a Chartered Accountant.I want to do SAP FICO Module from SAP Certified Education Center in Delhi,India.I have also done One Year Intensive Advanced Diploma in JAPANESE Language from Delhi University.I have also done JLPT Level 3.
I have following queries :--
1.Which one is the best SAP Education Center in Delhi both in terms of education and placement ?
2.What are the job prospects after completing CA n SAP FICO in Japan ?
I will be thankful to you if you could provide me guidanc eon the above issues ..
THANKS..
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PM
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PM

Chartered Accountancy with SAP FI-CO itself is a lethal combination. Looks like you love Japan or there is someone there whom you love. There are quite some companies in Japan that have implemented SAP (you can get into support, upgrade, enhance kinda roles) and there are also new implementations in the pipeline. As far as training goes, go to any SAP Education Partners (Siemens, etc.). Give your full time to demos and practice sessions on SAP when in training - reading books only will not help.
Good luck.

Select printer in Bartender labels printing with SAP Idocs

Hi Guru's.
I'm using Bartender to print labels with SAP Idocs.
The method is create a trigger with Bartender Commander and write Idoc format files in the path where the
trigger is scanning.
It works fine but the problem is that even prints in the same printer ( selected when I created de label design ).
The question is : How I can to select the printer I want to print the label ?????
Thanks a lot
regards
Ismael

Hi Krishan,
I want to print latin and chinese characters on the Zebra printer. How did you solve? What device type do you use?
I have created a standard text with SO10.
Currently I use ASCIIPRI and all chinese characters are printed as #. The device type is obviosely wrong.
I hope you can help me.
Frank

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Problem with SAP logon by VBA

Hi, I'm new in the community and I'm also new with SAP, so sorry for any errors.
For my work I need to open SAP by excel (VBA); and I have found the code below but it don't work.
Sub Work()
Set app = CreateObject("Sapgui.ScriptingCtrl.1")
Set Connection = app.openconnection("my system", True)
Set session = Connection.Children(0)
session.findById("wnd[0]/usr/txtRSYST-MANDT").Text = "Client"
session.findById("wnd[0]/usr/txtRSYST-BNAME").Text = "User"
session.findById("wnd[0]/usr/pwdRSYST-BCODE").Text = "Password"
session.findById("wnd[0]/usr/txtRSYST-LANGU").Text = "Language"
Session.findById("wnd[0]").sendVKey 0
End Sub
When the macro runs there is this error
Can you help me?
Thank you,
ax_salerno

Hi Alessandro - I am sharing an Excel sub that works for me by opening up logon pad, signing on to production, gettting credentials, then going into SAP and doing a transaction, and finally asking the user to click ok to terminate the session. I think this is something that there were questions on how to do the session close nicely but not sure if there is a solution yet.
Hope this helps.
Regards
Umur
Sub Logon()
'starts by executing logon pad, selecting prod, then enters
id/pwd
'works to sign on to sap and then kill the connection.
refers to saplogon.exe in Program Files/SAP71/FrontEnd/SAPGui folder
Dim SAPguiAPP As Object
Dim oConnection As Object
Dim Session As Object
Dim SAPCon As Object, SAPSesi As Object
Dim SapGuiAuto As Object, SAPApp As Object
If SAPguiAPP Is Nothing Then
    Set SAPguiAPP =
CreateObject("Sapgui.ScriptingCtrl.1")
End If
If oConnection Is Nothing Then
    Set oConnection =
SAPguiAPP.OpenConnection("1. Prod", True)
End If
If SAPSesi Is Nothing Then
   Set SAPSesi =
oConnection.Children(0)
End If
Application.DisplayAlerts = False
With SAPSesi
    .FindById("wnd[0]/usr/txtRSYST-MANDT").Text
= "010"
.FindById("wnd[0]/usr/txtRSYST-BNAME").Text = "USER"
.FindById("wnd[0]/usr/pwdRSYST-BCODE").Text =
"PASSW"
'.FindById("wnd[0]/usr/txtRSYST-LANGU").Text = "EN"
.FindById("wnd[0]").SendVKey 0
    'start extraction
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/tbar[0]/okcd").Text = "/Niw33"
.FindById("wnd[0]").SendVKey 0
.FindById("wnd[0]").Maximize
.FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").Text =
"8762449"
    .FindById("wnd[0]/usr/ctxtCAUFVD-AUFNR").CaretPosition
= 7
.FindById("wnd[0]/tbar[1]/btn[8]").Press
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/tabsTABSTRIP/tabpTS05/ssubVALUES:SAPLICO1:1105/cntlPMCO_SUM_TREE/shellcont/shell/shellcont[1]/shell").HierarchyHeaderWidth
= 162
.FindById("wnd[0]/usr/subSUB_ALL:SAPLCOIH:3001/ssubSUB_LEVEL:SAPLCOIH:1107/tabsTS_1100/tabpKOAU/ssubSUB_AUFTRAG:SAPLICO1:1100/btnPUSH1").Press
    .FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").SelectedRows
= "0"
.FindById("wnd[0]/usr/cntlGRID1/shellcont/shell/shellcont[1]/shell").DoubleClickCurrentCell
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[1]/usr/btnSPOP-OPTION1").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
.FindById("wnd[0]/tbar[0]/btn[3]").Press
    'etc
End With
     MsgBox
"After clicking OK, this SAP session is terminated."
Application.DisplayAlerts = True
     Set Session =
Nothing
    Set Connection =
Nothing
    Set SAPguiAPP =
Nothing
End Sub

Different languages without using SAP authentication

Hi folks,
is it possible to leverage the language capabilities of BW in WebI through an Universe WITHOUT using SAP authentication (means having a fixed user in the underlaying BW connection and NOT SSO)??
We are facing this requirement in a POC having Cognos as oponent and they can do this!
Thanks and regards,
Harald

Hi Sebastian,
yes I know, but this is then fix per connection. What I want is having one universe with one connection, BUT still leveraging the different language-texts from SAP BW... Is this possible or not? Until now I only see the possibility to create one universe for each language and this is not satisfiying the customer...
Regards,
Harald

Crytal Integration with SAP BW

Need help.
I have read some links at SDN, like Getting started link on BO and also [http://www.businessobjects.com/product/packages/] to understand do we have to buy any additional licenses to use Crytal reports with my SAP BI 70?
1) We already own Crystal Enterprise. We are using for Non SAP Data
2) I remember to see SAP's integration kit in BW 3.5 and toolset to allow creating Crystal Reports on BW Queries. Also remember as SAP Customer we have access to create 10 queries even when we do not have Crystal License.
3) Since we have Crystal Enterprise already, do we need to buy additional Licenses for using it for SAP BW.
My question is limited to Crytal because SAP had some content development relationship with Crystal before.
BusinessObjects XI Integration Kit for SAP wiill certainly will allow it but is it really needed for Crystal Reports?
Can some one clarify?
Pankaj

hi pankaj,
Integration of SAP BW 3.5 and SAP EP 5.0
Use
You can integrate a number of objects and applications of SAP BW 3.5 into SAP EP 5.0.
SAP EP 5.0 includes the following objects:
Applications are designated as Services in the Enterprise Portal.
With the integration of roles, the role migration from all services automatically creates External Services, as long as the services have not been saved in the BEx Web Application Designer as iViews. External services are displayed in the portal as applications that fill an entire page.
iViews are services that encompass an entire page in the portal. A portal page can consist of several iViews from different systems and sources (for example, the Web).
iView files are files with the ending .ivu that include a description of the iView in XML. You can import IView files without direct role migration into the portal.
Prerequisites
You have made the necessary settings in SAP BW 3.5 and SAP EP 5.0. You can find more information under Making Settings for SAP BW 3.5 and SAP EP 5.0.
Features
You can use the following BW services in the SAP Enterprise Portal 5.0:
·        BEx Web application
·        BEx Web Application As an iView
·        BEx Web application as an iView file
·        BW query
·        BW workbook
·        Crystal Report
The following options are available for integration:
·        BW services integration using roles with the help of role migration
For more information, see Integration Using Roles.
·        Integration of BEx Web applications using the function Publish ® In the Enterprise Portal 5.0 as an iView in the BEx Web Application Designer
For more information, see Integration Using iViews.
·        Integration of BEx Web applications using the function Publish ® In the Enterprise Portal 5.0 as an iView in the BEx Web Application Designer
For more information, see Integration Using iViews.
·        Integration of BEx Web applications using Create as External Service in the Portal
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP5.0 SP6 ® Administration Guide ® iViews ® Java iViews ® Creating Java iViews ® Creating Java iViews for BEx Web Applications.
·        Integration of BW services using the iView Wizard in the portal
For more information, see Integrating BW Services Using the iView Wizard .
The integration of BW contents into the Enterprise Portal ideally takes place using Web applications and queries that run in the Web browser. In some circumstances, you can also integrate other BW components, such as the Administrator Workbench or the BEx tools BEx Query Designer, BEx Web Application Designer, or BEx Analyzer into the Portal. For more information, see Integration of BW Components into the Portal.
Integration Using Roles
Use
You can save all of the BW services supported by the Portal - except for the iView files in the BW system. By using role migration you can integrate these BW services quickly and easily into the portal.
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP5.0 SP6 ® Administration Guide ® Roles ® Roles and SAP Systems ® Migration of SAP Roles to the Enterprise Portal ® Using Migrated Services to Roles and Worksets.
Features
The migration logs are usually stored under ...irj
esourcesSAPMigration.
The location of the irj directories is dependent on the J2EE Server.
Checking Migration:
You can check the migration via Content Admin ® Roles. You can use Preview to execute the migrated services both in the View Areaand in the Edit Area. If you have assigned a role to a user, you can check the total role completely.
Integration Using iViews
Use
The integration of the BW system and the portal with iViews is possible by using the role migration and the import of iView files. iViews are structured in the portal in channels.
Features
Role migration
With role migration, the iViews contained in the BW role are created in the iView server, where a separate channel is created for each role migrated from the BW system. The channel receives the name of the migrated BW role automatically from the system.
You can view the migrated iViews in the portal in the iView editor by using Content-Admin ® iViews. Select the name of the channel there.
If the iViews already exist in the portal, they are neither deleted nor overwritten. You can remove the iViews manually by using Edit ® Delete.
Import of iView files
BW iViews are in the portal Java iViews.
       1.      Therefore, choose the category Java iViews before the import.
       2.      In the iView editor under Content-Admin ® iViews, choose the Import function.
iViews are currently only supported in one language (English).If the English language is not maintained for an iView, then a technical name is created from the logical system and from the BW template ID.
You can change the texts for iViews using Content Admin ® iViews. Select an iView and choose Edit.
In addition, note that with BEx Web applications under Content Admin ® iViews ® Edit on the Load tab page, the iView Load Method Bypass iView Server has to be activated.
Check
Under Content Admin ® iViews, you will find next to each iView a Preview link that enables the execution of an iView.
For the display of iViews in the portal, the assignment of iViews to the portal pages and their assignment to roles is necessary.
Assigning iViews to pages
       1.      Under Content-Admin ® Pages, choose the New function to create new pages in the portal.
       2.      Under the Content tab page, select the iViews you want.
If necessary, you need to change the Display selection to All or Not Selected to select new iViews.
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® Pages ® Defining the Page Content (Content tab).
Assigning pages to roles
       1.      Before a page is able to be viewed by a user, you have to assign it to a role.
       2.      Under Content-Admin ® Roles, select a role for editing and choose Edit.
       3.      Under View Area ® Show, select the Pages entry.
       4.      Select a page and choose Add to add it to a role.
If necessary, select the file as Is Entry Point, so that the page is then able to be viewed.
The option Mark first-level folders as entry point means that the file is valid on the highest level in the role as the point of entry. This selection causes assigned users to this role to receive this file, displayed in the initial navigation bar.
You can also restrict this setting subsequently with the help of Content Admin ® Roles for the specific file.
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® Roles ® Role Maintenance ® Creating Roles and Assigning Contents ® Assignment of Content Objects to Roles.
Assigning roles
Afterwards, you have to assign the particular role to the user.
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® User Management ® Assignment of Users and Groups to Roles.
Check
To check iViews in the portal according to the assignments described above, you need to call up the portal again.
Calling up the Enterprise Portal is possible by using the URL http:///sapportal.
See also:
You can find additional information about Roles and Role Migration in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® Roles.
You can find additional information about iViews and the iView-Editor in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® iViews.
Integrating BW Services Using the iView Wizard
Use
In addition to the integration of iViews using role migration, you can also use the iView wizard in the portal to integrate iViews into the portal.
Procedure
Call up the iView wizard using Content-Admin ® iViews.
As the type, choose Java.
Choose New iView.
On the Info tab page, specify a Unique Name and an iView Title.
On the Load tab page, choose the iView Load Method Bypass iView Server.
On the Java tab page, choose BW Web Application as the application type.
Choose Next.
Select the BW system from the dropdown box.
Specify the BW Query String.
Choose Finish.
Choose Add.
The BW Query String is the part of the BEx Web application URL that is found after the question mark, for example, ?cmd=ldoc&template=0Query_template.
You obtain the query string.
in the BEx Web application designer:
Choose Web Template ® Open to open the Web template for the BEx Web application you want.
Select the Web template from your history, your favorites, or your rolls by double clicking on it.
In the Web application designer, choose Publish ® Copy URL in Clipboard.
in the Web application executed on the Web
Note that the Web application has to be in its initial status. That means that you have not yet navigated there, but rather that you only displayed the Web application on the Web.
In the context menu for Internet Explorer, choose Properties.
Select the Address (URL) and choose Copy in the context menu.
You now have the URL on the clipboard and can then use the query string for entry in the iView wizard.
Note that you have to specify the correct stylesheet when creating iViews manually.
Choose under Content-Admin ® iViews next to the Edit iView.
On the Java tab page, select the BIReports30 stylesheet under Look and Feel Theme Part for BW Reports.
Using System Configuration ® Styles, you can edit stylesheets that each user can then select themselves using Personalize: Portal.
The style editor also contains entries for BEx Web applications under Elements ® Complex Elements.
The modified stylesheets are transferred automatically to the BW system so that the BEx Web Applications are suitably displayed in the stylesheet for the portal.
Check
Under Content Admin ® iViews, you will find next to each iView a Preview link that enables the execution of an iView.
Result
You have now integrated a Web application as an iView into the portal. Before you can display the iView in the portal, you have to assign the iView to a page. The page has to be assigned to your role. See also Integrating Using iViews.
Integration of BW Components into the Portal
Use
The integration of BW contents into the Enterprise Portal ideally takes place using Web applications and queries that run in the Web browser. In some circumstances, you can also integrate other BW components, such as the Administrator Workbench or the BEx tools BEx Query Designer, BEx Web Application Designer, or BEx Analyzer into the Portal.
Features
Calling the Administrator Workbench
The Administrator Workbench is a comprehensive SAP transaction that functions only in connection with a locally-installed SAP GUI for Windows. With a SAP GUI for Windows 6.20, you do not have to log on again if you want to display SAP GUI for Windows transactions on the Web (single sign-on is supported).
You can generate the Administrator Workbench in the portal as an external service either using SAP role migration or manually by way of the following steps:
Start the External Service wizard from Content Admin/Roles/Edit Area/External Service and choose Create.
Select the BW system.
Choose SAP Transaction as the application type.
Choose WinGUI as the GUI type.
As the transaction code, enter RSA1.
You can now assign the External Service to a role.
Calling the Business Explorer Analyzer
The Business Explorer Analyzer (BEx Analyzer) is an Excel add-in with extensive OLAP functionality in connection with a BW system. In order to use the BEx Analyzer, you have to have the SAP GUI for Windows with the BW Frontend installed locally. For technical reasons, the BEx Analyzer opens in a separate window. You do not have to log on again because single sign-on is supported. A SAP GUI for Windows appears in the Enterprise Portal window in the work area.
You can generate the Administrator Workbench in the portal as an external service either using SAP role migration or manually by way of the following steps:
Start the External Service wizard from Content Admin/Roles/Edit Area/External Service and choose Create.
Select the BW system.
Choose SAP Transaction as the application type.
Choose WinGUI as the GUI type.
As the transaction code, enter RRMX.
You can now assign the External Service to a role.
Calling BW Workbooks
BW workbooks are MS Excel workbooks with one or more embedded queries. BW workbooks need the BEx Analyzer, which requires a local installation of the SAP GUI for Windows with the BW Frontend.
The Enterprise Portal is an application that runs on the Web. BW workbooks are suitable for Windows with Excel.
We recommend that you use BEx Web applications in the Enterprise Portal that also run completely in the Web browser.
You can use the function Export as Excel 2000 File from the Web application context menu as an alternative to a local installation of the BW Frontend if you need to use the functions of Excel. See Functions of the Context Menu and Exporting as a CSV File/Excel 2000 File.
SAP role migration automatically generates external services that point to BW workbooks. HERE AND CHECK PATHS
Start the External Service wizard from Content Admin/Roles/Edit Area/External Service and choose Create.
Select the BW system.
Choose SAP Transaction as the application type.
Choose WinGUI as the GUI type.
As the transaction code, enter RRMXP.
Choose Finish to save the external service.
You then have to add the following parameters using Edit since you cannot enter these using the wizard.
The parameter Additional Dynpro Parameters name-value-pairs (n1=v1;n2=v2;... optional allows the workbook ID to be specified (for example WBID=CN24XRCKJ8HDDIZ3CCUTGPF1A).
Under Process first screen automatically?, enter the value True.
You can now assign the External Service to a role.
Calling the Business Explorer Web Application Designer
The Enterprise Portal is an application that runs on the Web. The BEx Web Application Designer is a Windows application. It is technically possible to start Windows applications in the Web browser but this is not recommended for security reasons. Instead, you call the Windows application BEx Web Application Designer from the Windows start menu.
If necessary, you can create an HTML page on a Web server that contains the link file://C:/Program%20Files/SAP/FrontEnd/Bw/wdbpwpub.exe.
Note that the path is dependent on the local installation directory. Single sign-on is not supported.
Calling the Business Explorer Query Designer
The Enterprise Portal is an application that runs on the Web. The BEx Query Designer is a Windows application. It is technically possible to start Windows applications in the Web browser but this is not recommended for security reasons. Instead, you call the Windows application BEx Query Designer from the Windows start menu.
As an alternative to the BEx Query Designer, in a Web environment such as the Enterprise Portal, you can use the BEx Ad-hoc Query Designer to create or change queries. You can insert the Ad-hoc Query Designer into a Web application and integrate it using the role migration, for example, or as an iView into the Enterprise Portal. For more information, see Functions of the Ad-hoc Query Designer.
If necessary, you can create an HTML page on a Web server that contains the link file://C:/Program%20Files/SAP/FrontEnd/Bw/wdbrlog.exe.
Note that the path is dependent on the local installation directory. Single sign-on is not supported.
Calling the Business Explorer Browser
The BEx Browser behaves like the BEx Web Application Designer or the BEx Query Designer.
There is little point in using the BW-specific BEx Browser in a company-wide Enterprise Portal because the basic functionality of the BEx Browser (calling reports) is covered in the Enterprise Portal.
You can find additional information in the Enterprise Portal documentation in the SAP Help Portal (http://help.sap.com) ® SAP NetWeaver ® SAP Enterprise Portal ® EP 5.0 SP5 ® Administration Guide ® Roles ®
·        Roles and SAP Systems ® Migration of SAP Roles to the Enterprise Portal
·        Role Maintenance ® Definition and Provision of Role Contents ® Creating External Services ® Creating External Services for SAP Transactions.
·        Role Maintenance ® Creating Roles and Assigning Contents ® Assignment of Content Objects to Roles ® Assigning External Services
Differences SAP BW 3.5 SAP EP 6.0 & SAP BW 2.x/3.x SAP EP 5
Use of BW Objects in the Enterprise Portal
For the end user, there are no significant differences in the integration between SAP BW and SAP EP as regards the various release combinations. The updates and changes in SAP Enterprise Portal 6.0 have no effect on the use of BW objects in the portal. You can find more information on the changes under Differences between SAP EP 5.0 and SAP EP 6.0.
Publishing BW Objects to the Enterprise Portal
There are significant differences in publishing of BEx Web applications in SAP EP 6.0 with SAP BW 3.5 in comparison to integration between SAP BW 2.x/3.x - SAP EP 5.0. Publishing in SAP BW 3.5 is done using the BEx Web Application Designer, BEx Query Designer or the BEx Broadcaster.
In SAP EP 5.0, the SAP BW system (or the SAP BW systems) is maintained in the system landscape, through which a call of BEx Web applications is possible at runtime. In SAP BW 2.x/3.x systems, the SAP Enterprise Portal (or SAP Enterprise Portals) are not maintained. Thus a BW system only has a one-sided connected to a portal. For this reason, the inclusion of BW content must also be done in a separate step in the portal.
In SAP EP 6.0, the SAP BW system is also maintained in the system landscape. In addition, one or more SAP Enterprise Portals 6.0 can be entered in the SAP BW 3.5 system. Through deployment of Java components of SAP BW 3.5 into SAP EP 6.0, the SAP BW 3.5 System can access and display contents of the portal. In the BEx Application Designer, assigned portal roles, content from the Portal Content Catalog, and documents and folders from Knowledge Management are displayed in the open and save dialogs. During save, iViews or documents can be created directly from the BEx Web Application Designer or BEx Query Designer without having to take separate steps in the portal. Using Information Broadcasting, documents and links can be generated in Knowledge Management. These documents and links can be visualized using the BEx Portfolio.
You can find more information on integration options under Integration of SAP BW 3.5 and SAP EP 6.0.
Integration of SAP BW 3.5 and SAP EP 6.0
Use
The integration of content from SAP BW into the SAP Enterprise Portal enables you to work with business intelligence content in the Enterprise Portal.
This section applies to the integration of SAP BW 3.5 and SAP EP 6.0 on Web AS 6.40.
SAP EP 6.0 on Web AS 6.20 does not include the necessary enhancements for the full features of integration options that are possible with SAP BW 3.5. For more information about the options with SAP EP 6.0 on Web AS 6.20, see Integration of SAP BW 3.x and SAP EP 6.0.
Prerequisites
You have made the necessary settings in SAP BW 3.5 and SAP EP 6.0. For more information, see Making Settings for SAP BW 3.5 and SAP EP 6.0.
Features
The following sections describe the integration from the portal users viewpoint on one hand, and on the other hand, from the viewpoint of the administrators and authors who generate and publish the content in SAP BW:
·        Integration from the Users Viewpoint
·        Integration from the Viewpoint of Administrators and Authors
Integration of SAP BW 3.x and SAP EP 6.0
Use
The integration of content from SAP BW into the SAP Enterprise Portal enables you to work with business intelligence content in the Enterprise Portal.
The name SAP BW 3.x includes the following releases:
·        SAP BW 3.0B
·        SAP BW 3.1 Content
·        SAP BI Content 3.2 Add-On
·        SAP BI Content 3.3 Add-On
This section is valid for the integration of SAP BW 3.x and SAP EP 6.0 on Web AS 6.40, SAP BW 3.x and SAP EP 6.0 on Web AS 6.20 and the integration of SAP BW 3.5 and SAP EP 6.0 on Web AS 6.20.
SAP EP 6.0 on Web AS 6.20 does not include the necessary enhancements for the complete scope of functions regarding integration options that are possible with SAP BW 3.5. For this reason, SAP EP 6.0 on Web AS 6.20 cannot use the extensive integration options with SAP BW 3.5
Prerequisites
You have made the necessary settings in SAP BW 3.x and SAP EP 6.0. For more information, see Making Settings for SAP BW 3.x and SAP EP 6.0.
Features
The features of integration of SAP BW 3.x and SAP EP 6.0 correspond in part to the integration of SAP BW 3.5 and SAP EP 6.0. For this reason, you should carefully read the appropriate sections under features that are linked to here and note the following differences:
Integration from the Users Viewpoint
In the section Integration from the Users Viewpoint, there are the following restrictions:
·        Displaying Content from SAP BW in the Enterprise Portalsapurl_link_0002_0003_0016:
The display types Precalculated BEx Web Application as Document and BEx Web Application as Link in Knowledge Management are not supported.
·        Calling Content from SAP BW in the Enterprise Portalsapurl_link_0002_0004_0016:
Calling BEx Web Applications as documents and links in Knowledge Management in the KM Navigation iView is not possible.
The Business Explorer portal role does not exist.
·        Content from SAP BW in the Navigation Panelsapurl_link_0002_0005_0016:
In this section there are no restrictions.
Integration from the Viewpoint of Administrators and Authors
In the section Integration from the Viewpoint of Administrators and Authors, there are the following restrictions:
·        Overview: Integration- and Display Types of BW Content in the Portalsapurl_link_0002_0007_0016:
The following display types are supported:
¡        BEx Web Application As an iView
¡        BW Workbook As an iView
¡        BW Query As an iView
¡        Web-Interface As an iView
¡        Components from SAP BW
The following display types are not supported:
¡        BEx Web Applications as a document in Knowledge Management
¡        BEx Web Applications as an online link in Knowledge Management
¡        BW workbook as a document in Knowledge Management
¡        BW-Query as an online link in Knowledge Management
¡        BW query as a document in Knowledge Management
¡        Single BW document in Knowledge Management as an iView
¡        Multiple BW documents in Knowledge Management as an iView
The following integration tools are supported:
¡        Portal Content Studio
¡        SAP Role Upload (from SAP EP 6.0 on Web AS 6.40)
The following integration tools are not supported:
¡        BEx Broadcasting Wizard
¡        BEx Broadcaster
¡        BEx Web Application Designer
¡        BEx Query Designer
¡        KM Content
·        Displaying Content from SAP BW in the Enterprise Portalsapurl_link_0002_0008_0016:
Content from SAP BW can be displayed in the following ways:
¡        BEx Web Application or Query as iView in the Enterprise Portal
¡        BW workbook as an iView in the Enterprise Portal
¡        Web Interface (from BW BPS) as iView in the Enterprise Portal
¡        Components from SAP BW
·        Calling Content from SAP BW in the Enterprise Portalsapurl_link_0002_0009_0016:
Calling content from SAP BW is only possible using portal roles. For more information, see Calling with Portal Roles.
·        Content from SAP BW in the Navigation Panelsapurl_link_0002_0011_0016:
In this section there are no restrictions.
·        Generating Content from SAP BW for the Enterprise Portalsapurl_link_0002_0012_0016:
To generate content from SAP BW, you have the following: Integration Using the Portal Content Studio, Integration Using Role Upload and Integration Using the Role Menu and the Alert Monitors. Integration Using Role Upload will be supported starting with SAP EP 6.0 on Web AS 6.40.
Information Broadcasting in SAP BW 3.5 especially provides integration into Knowledge Management, which is not available in SAP BW 3.x. BEx Web Applications as documents and links in Knowledge Management are not supported with SAP BW 3.x.
thanks
karthik
reward me points if helpfull

Installing SAP online documentation and integrating with SAP.

bold Dear all
I am trying to integrate SAP library with CRM server.
I have followed the steps mentioned in the Online documentation CD ( Read me and online
documentation PDF fils).
I am trying to install HTMTHelp library.
I have followed the following steps :
1. Copy the directory Htmlhelp\Helpdata\<language key> with all its subdirectories
     from the DVD to the documentation directory on the server.
Later defined the setup variants.
1 . T.code SR13
2 . select the HtmlHelpFile tab page.
Switched to the change mode and entered the following details :
Variant = saphelp
platform = windowsNT
Area     = IWBHELP
Path      = c:\sapdcoument\HTMLHelp
Language = EN
Defaul = enable
I have saved the changes and it asked me to create the change request.
i have made these changes in the client 000 ***
When i click on the Help -> Application help or SAP library under the help menu
it is giving me the error " No Documentation available ".
Could some one help me with this.
Regards
Kiran

Dogboy49
I have shared the helpdirectory which is located on the server and
it is accessible in the network from all the PC ( frontend ).
But when i try to accesss it is throughing an error and when i look
in the SAPDOCCD log file located in the Windows directory i find this error.
I am posting the SAPDOCCD file. kindly suggest if you have any solution
Program path =     C:\Program Files\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
SHH version =     7.1.0.4
Command line =
"TYPE=5&SERVER=&PATH=
idescrm\SAP\CRM\HELPDATA\EN\EN&SYSTEM=CRM&_CLASS=IWB_STRUCT&_LOIO=
&_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=500&IWB_COUNTRY=&IWB_INDUSTR
Y=BBPCRM&_SCLASS=IWB_STRUCT&FRAME=X"
Info:          --- Default settings from command line ---
Info:          HelpType=HtmlHelpFile
Info:          HtmlHelpFilePath=
idescrm\SAP\CRM\HELPDATA\EN\EN
Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program
Files/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program
Files/SAP/FrontEnd/sapgui/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini"
Warning:     Could not read any profile
Info:          --- Starting HtmlHelp ---
Info:          CHM file="
idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134\1a06084d\e1000000
\9b38f83b\frameset.chm"
Info:          HTM file=""
Error:          Could not find file "
idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134
\1a06084d\e1000000\9b38f83b\frameset.chm" *
Regards
KiranKumar
Edited by: kiran kumar on Feb 25, 2008 7:40 AM

How to translate Vietnamese with SAP ERP.

Hi all,
My system need to translate Vietnamese. The language file with Material Number: 51036758 downloaded. Now how to import it. I refer to note 1312188, it need to import SAPKLVI700ABY18W20F0. how to import SAPKLVI700ABY18W20F0? Please, give me detailed explanation!!
Please advise,
Thanks
Duypm

Dear Duy,
For ERP, please use the following Material Number:
51036759.zip ERP 6.0 Language Vietnamese (SAP Note 1294592)
Extract and put the extracted file .PAT in EPS/in
Start SMLT
Language --> Classify
If VI is not present in the list
Goto --> Other Tools --> NLS installation tool
Click on "Extend Language List" button
Language Key VI
Execute
Back
Now add VI in the list and Activate
Restart SMLT (/nSMLT)
You can now classify Vietnamese language.
For import: Select Vietnamese language --> Import Package
Find Package (default path /usr/sap/trans/EPS/in)
Select the package then execute the import
Hope it can help you,
Tuong-Huy

Why Photoshop CS6 does not include language selection ? dont want it on win8 language, I want in eng

Right now I am installing the programs on my new 64 bits computer , which runs windows 8 in a language which is not english.
At the very beginning of the setup I noticed that it detected the language of sist. op. and that it would install cs6 in such language.
I am very, very ,very upset with this and I will tell you the reason : the best in terms of literature , pdfs books , tutorials , support forums ,etc is written in ENGLISH !
If I install cs6 I will have all menus , tools and resources in other language and it will be very cumbersome to work with it.
Perhaps with the best of the intention to make people feel comfortable with their own language you have made it this way.
But there are several other guys like me that want it IN ENGLISH.
As a long time user of photoshop I never worked in other language than english and I will never do it.
It looks like it is a new trend to detect the op sistem language , I have had the same problem with Nero Platinum 12 , and others.
Is there a way to install Cs6 in english ?
I have no idea whether adobe developers team read this forum but I will give my suggestion : don´t leave the setup to choose the language , this is dictartoship , be democratic and bring back the language selection menu.
thanks

The setup choice only defines the language for the EULA.
You download the version for whichever language you want the app to be in.

Language selection with SAP SSO

Similar Messages

Maybe you are looking for