Language specific template is not working
Hi all,
I have converted AR invoice report to xml. which has a standard template and language specifis tempalte.
while running in development instance i use to select the language specific template using the options button in SRS. it works fine.
but same thing when i try to do ti in QAT, it is not working it is picking the language specific template. even though when i manually select the language specific template while submitting but the standard template is assigned.
Please help me to solve this isssue.
Thanks
Rajesh
Thanks Rajesh for posting the solution you found. I ran into the same problem then went into the concurrent program definition for the invoice and removed the MLS Function and now when I choose a different language template it works.
Thanks,
Ken
Similar Messages
-
Importing element definition from an EDD into a template - does not work
FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
ThomasLynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From: Lynne Price <[email protected]>
To: "Th. Zeisig" <[email protected]>
Date: 13.10.2011 14:12
Subject: Importing element definition from
an EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
Valid as the highest-level element.
General rule: (
When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
Can you send me a short EDD that fails as you've described?
Thanks,
--Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
Page Break In XML Publisher RTF Templates Are Not Working
Please refer to the Metalink Doc below:
Subject: Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID: 559111.1
Type: PROBLEM
Modified Date: 24-MAR-2008
Status: MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks -
Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.SThanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S -
Header links in the web template is not working
Hi all,
I have a created webtemplete in that, header links in the web template is not working. But individually header links. I am not why they are not working in webtemplete.
guys please help for above situation.
Thanks,
JamesHi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Web Templates shortcut Not working in SAP Browser screen
Hello All,
I am facing a diffrent issue with Business Explorer Browser 3.x.
When I try to open shortcuts which is for (Web templates) created in Business Explorer Brower 3.x they are not working properly.
The addres stored for this web templates misses the server address in between.
All the web templates were working fine before Support Pack upgrade. We recently has upgraded to SAP BW 7.02 support pack 7.
I am not sure if this is support pack upgrade issue. Would like to know if someone faced same issue and how did they fixed it. is there any way to modify those address on PROD directly.
Many Thanks,
VaishaliHi Vaishali,
We also faced the similar issue and I contacted my basis team they have done some configuration in tables related to basis and then my web templates started working fine. I guess this is general issue which occurs after upgrade.
I don't know the exact solution but you can check with your basis team.
Regards,
Durgesh. -
Bursting a PDF Template is not working correctly
We are using a PDF template for an export document and we are bursting the request so that we can send the output to multiple destinations.
This all works correctly until we hit a document that results in multiple pages. This results in the generated output to be a complete mess. Text appearing all over the page.
If I take the same XML and run it through the template in Template viewer, everything works as expected. The text is all where it is supposed to be. So this appears to be an issue with how the XML and template are bursted.
Anyone have any ideas?
EDIT: I should mention that we're on XML Publisher v 5.6.3
Edited by: Allen N on Apr 30, 2009 1:45 PMProblem solved - thanks pancenter!
"In Preferences/Audio
Do you have Universal Track Mode selected? If not, try selecting it." -
I've used JDev9.0.4 and UIX.
I want to use include and template at the same time.
So I've put a 'globalHeader' and a 'tabBar' in 'Test.uit'.
And I've made 'TestUIT.uix' which used 'Test.uit' as a template include 'Table.uix'.
But 'Table.uix' included by 'TestUIT.uix' has been ignored and has not worked!!
Is this problem oriented from my fault or a bug of jdev904?
My codes like this.
-->
Test.uit
<?xml version="1.0" encoding="windows-949"?>
<templateDefinition xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui"
targetNamespace="http://www.example.org/demo/templates"
localName="oplBaseLayout">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<provider>
</provider>
<contents>
<pageLayout>
<tabs>
<include node="../Component/MenuBar/TabBar.uix"/>
</tabs>
<pageHeader>
<include node="../Component/MenuBar/GlobalHeader.uix"/>
</pageHeader>
<contents>
</contents>
</pageLayout>
</contents>
</dataScope>
</content>
</templateDefinition>
TestUIT.uix
<?xml version="1.0" encoding="windows-949"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:myTemplate="http://www.example.org/demo/templates">
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="OligoAppModule" definition="View.OplModule"
releaseMode="stateful">
<bc4j:viewObjectDef name="Oligo" rangeSize="3"/>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="Test.uit"/>
</templates>
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider/>
<contents>
<document>
<metaContainer>
<head title="UITTest"/>
</metaContainer>
<contents>
<body>
<contents>
<myTemplate:oplBaseLayout title="UITTest">
<contents>
<bc4j:viewObjectScope name="Oligo">
<contents>
<include node="Table.uix"/> </contents>
</bc4j:viewObjectScope>
</contents>
</myTemplate:oplBaseLayout>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers/>
</page>Hi -
But 'Table.uix' included by 'TestUIT.uix' has been
ignored and has not worked!!So is the problem that you don't see the contents of Table.uix? Are any error messages logged? Do you see the contents of the GlobalHeader.uix and TabBar.uix includes?
It would be very helpful if you could put together a minimal testcase which reproduces the problem (no BC4J tags) that we could use to test the problem out over here.
Andy -
XML Template was not working correctly in 11.5.9
Hi
I am currently working on XML rtf template for Invoice. And the rtf XML template is working fine (getting results as expected) in 11.5.10 but the same rtf is not working fine in 11.5.9( not getting the results as expected). My current version of XML Publisher in 11.5.9 is 4.5 and in 11.5.10 is 5.6. My question is there any to make the rtf work correctly in 11.5.9 aslo.
Thanks,
Ram.I have seen such issues earlier. What you can do is to either upgrade xml publisher version or you have to play around with template a bit like adding dummy rows with lines invisible and consume very less space, dummy columns etc to get desired results
-
ERecruiting:Process Template link not working
Hi All,
Recently we have applied a patch "nw eph1 sp05" after which the Process template link is not working.
We have raised an OSS note in this regard and they have a provided Note 1342091 to apply.
We have implemented that note and found that the Process Template link is working, but it is failing in one place:
Recruiter start page>View/Manage Candidates within Requisitions>Assignments>Select candidate and click on the 'Process Activities' button>click on the Process Template link
When we click on the Process template link a blank page appears.
However we have replied back to them, meanwhile I would like to know if anybody have faced any similar issue can provide some ideas in this regard.
Thanks,
PoojaMThe issue has been resolved.
-
EPM Report/Input template & functions not working
Hello Experts,
We are working on SAP BPC 10 NW SP 04, and EPM Addin SP 16.
We have an input template/report where- in rows we have 3 dimensions and 3 in columns. In template we have used EPMDimensionoverride function for row and columns both, also extensively used EPMDimensionPropertyValues for filters of other dimensions.
We are facing different types of problems with this report:
Scenario1 – The template does not gets opened. We have “Refresh while opening the sheet” option in use. While opening this template, the refresh doesn’t happen and it says “Process in progress.Please wait”. And the Excel is hanged out totally.
Scenario 2 – In the filter part where we have used EPMDimensionPropertyValues functions. Sometimes it shows the dropdown list and sometimes not. IF we select any member in the filter, the other dropdown’s become disabled, but after refresh they are working. If the property values exceed 255 limit, we specify a range in the EPMDimensionPropertyValues function. But sometimes this is also not working. If we specify range it doesn’t populate the data also plus the dropdown created is blank. One point noticed was that when the sheet is protected it displays some dropdown lists, but when we unprotect the sheet all the dropdown’s are listed. We are facing quite weird behavior while using this function.
Research a lot on this, Tried processing all dimensions, took them offline then online, Log out from the sessions and then re- logged in. Run the program UJA_REFRESH_DIM_CACHE, but no luck!
I copied the same environment into new. and executed the template. There it is working fine! except the EPMDimensionPropertyValues function. Dont know what the exact cause is???
Regards,
PriyankaHi Priyanka,
Based on your description it's not possible to help you... You have some complex template with a lot of formulas. And you have issues. Try to isolate the issue on some simple template and provide the screenshot with the formulas explanation.
Vadim -
Language Bar Change Option Not Working
Hi,
I have created demo for radgrid filter. if I search in first textbox filter column and press enter then focus of control goes to second textbox filter column. I change the language English to Japanese and selecting input mode hiragana
for typing text in filter it works in Firefox but not working in Internet Explorer. I have attached gif file for this problem.
Please provide solution for it.Hi,
C# forum is only for questions regarding C# language. The best way is to contact the support team of Telerik for help:
http://www.telerik.com/products/aspnet-ajax/grid.aspx
Or you may get more help from
ASP.NET forums.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I've trawled through this forum reading all the threads regarding this problem but unfortunately none of the advice given seems to have worked for me.
My problem is that whenever I update my template (dwt) my pages (html) isn't updates.
I've even goe as far as creating a completely new site and just testing out the template functionality...
1. created a new site (test_site)
2. created a simple template with a 2 row table. made the second row an editable region. (test_template.dwt)
3. created a new page from template (test_page.html)
4. back to test_template.dwt and edited the text in row 1 (the non-editable region)
5. hit save
opens popup: Update Template Files
Update all files based on this template?
test_page.html
hit update button
opens new popup Update pages
Files that use...
Templates checkbox ticked
Status:
Updating E:\Webserver\test_site\
just hangs here.
Tried to resolve this all day and am now left wishing I just did all the updates manually as I would have been finished long ago. However, this wouldn't be any good for future updates.
I've seen the following info posted on most of the threads, but none of the points relate to my site.
Here are seven common mistakes that will result in changes not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which will not
propagate)
5. Assume that template changes can be uploaded to the server without also
uploading the changed local files
6. Corrupt the site cache so that the link between template and child page
is broken
7, Improperly create your child pages by simply opening the template,
adding page specific content, and resaving the template with an *.html
extension rather that its *.dwt extension. (you can tell if this is the case
by looking at the code on a child page - if you see anything like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced > Recreate Site
Cache, and the six others can be fixed by just not doing them. Have you
done any of those?
done everything I can think of
Renamed Templates folder to foortemplates and then back to Templates
Delete Win...cache.dat
Recreated my site cache
I'm exhausted of this problem but would like to know if anyone can shed any light on a possible resolution. I was contemplating buying CS5 but with nonsense like this happening I'm reluctant to upgradeWelcome to the Dreamweaver Forum!
You may rest assured that the problem is not with the Dreamweaver program, and if you are stumbling over templates in CS4, you will be stumbling over them in CS5... So all you need is a little more practice!
Do not ever rename the Templates folder.
At this point,
opens new popup Update pages
Files that use...
Templates checkbox ticked
Status:
Updating E:\Webserver\test_site\
One of your choices for buttons should be "Close", which you may do as soon as it is available, because the site has already updated the pages. You can wait forever, but since it has already finished, it's on your time, not the program's!
If the pages are open when you update, you must save them again. (The page names in the tabs will have asterisks noting that they need saving.)
I recommend making another test site and test page and trying again. Remember, don't rename the Templates folder, and as soon as you make a Child page (your number 3), save it.
In fact, it doesn't hurt to save frequently:
Make a page. Save it.
Then save it as a Template. DW creates the Templates folder and saves your new Template in it.
Make a child page. Save it.
Change the Template. Save it. (it should update the child pages upon this save)
Once you get the hang of templates, they are very useful. They can be a little frustrating at the beginning, but they don't usually require the great efforts you have gone through already!
Beth -
Vendor-Specific Tolerence Groupsare not working in MIRO
Hi
We have defined new Tolerance group-1000 and assinged in vendor master.
This Telerance group is to allow $10+/- for small differences
It works fine for Autmatic acceptance of positive differece up to $10,
with/without taxes. But It doesn't work for Autmatic acceptance of
negtive(-) differece with taxes.
Also let us know, if there is a provision to maintain a description for
Tolerance group.
I am copying you the tech doc for your quick reference:
Configure Vendor-Specific Tolerances
In this step, you define tolerance groups for each company code. You can assign these tolerance groups to each vendor in the vendor master
record.
You can define the following tolerances:
Total-based acceptance
If the difference is within the tolerance range, the system
automatically generates a difference line on a neutral income/expense
account for small differences for invoices with debit/credit differences when posting the invoice.
Total-based invoice reduction
If the difference is within the tolerance range, the system posts the
difference to a clearing account and generates a credit memo in a second document to clear this.
The system uses the following logic:
1. The system determines the difference between the net invoice amount
(= gross invoice amount less taxes and unplanned delivery costs) and the net total of the items.
If the net invoice amount is the greater, the difference is positive; if the net invoice amount is the smaller, the difference is negative.
2. Negative differences:
a) If the negative difference is smaller than the absolute negative
small difference limit defined, the system generates a posting to a
small differences account for this difference.
b) If the negative difference is greater than the absolute small
difference limit defined, the system checks if the absolute difference
is smaller than the lower of the absolute and percentage lower limits.
If this is the case, the system creates a posting to a small differences account.
If this is not the case, the system cannot post the invoice.
3. Positive differences:
a) If the positive difference is smaller than the positive small
difference limit defined, the system generates a posting to a small
differences account for this difference.
b) If the positive difference is greater than the positive small
difference limit defined and the Check limit field isnot selected for
total-based invoice reduction, the system checks whether the positive
difference is smaller than the lower of the absolute and percentage
upper limits.
If this is the case, the system creates a posting to a small differences account.
If this is not the case, the system cannot post the invoice.
c) If the positive difference is greater than the positive small
difference limit defined and the Check limit field is selected for
total-based invoice reduction, the system checks if the difference is
smaller than the lower of the absolute and percentage upper limits for
total-based invoice reduction.
If this is the case, the system generates a posting to a clearing
account for invoice reduction and creates a credit memo document.
If this is not the case, the system cannot post the invoice.
The system does not try to reduce the invoice based on the total in the
following cases:
- If you manually reduced an invoice item
- If you manually accepted a difference in the document header
- If you entered a credit memo
In these cases, the system checks directly whether it can accept the
positive difference.
Activities
Specify
Up to which amount the system should automatically clear a balance when
a balance exists
How the system should post the difference
Further Notes
If the system can create a small difference, it posts this difference to the account specified in account determination for transaction DIF.
See: Configure Automatic Postings
If no tolerance group is assigned to a vendor or if no tolerances have
been specified for the assigned tolerance group, the system creates a
difference line if the difference is smaller than the tolerance defined
for tolerance key BD.
See: Set Tolerance Limits
Example
There is an invoice in the system to be posted; the vendor-specific
tolerances are defined for the invoicing party as follows:
Total-based acceptance of negative differences
- Check absolute lower limit: 200.00-
- Check percentage lower limit:4.00 %
- Check negative small difference: 10.00-
Total-based acceptance of positive differences
- Check positive small difference: 5.00
- Check absolute upper limit:30.00
- Check percentage upper limit:2.00 %
Total-based invoice reduction
- Do not check absolute and percentage upper limits
The invoice value expected by the system is 4000.
Gross Small
inv. amount difference Balance Explanation
3992 yes 0 2 a)
3925 yes 0 2 b)
3820 no 180- 2 b) percentage lower limit violated
4004 yes 0 3 a)
4025 yes 0 3 b)
4035 no 35 3 b) absolute upper limit violated
Vendot Tolerence group is maintained in Vendor master.
Thanks,
AnjiDear,
Please check what is the splitting characteristics you have defined in
SPRO>IMG> Financial Accounting (New)> General Ledger Accounting (New)> Business transaction>Document Splitting>Define Document Splitting Characteristics for General Ledger Accounting, check whether you have defined Proce Center and Segment as the characteristics or not.
Br, Vivek -
SQL Developer 2.1.1.64 - code template does not work in Windows Vista
I have been trying to import a code template in SQL Developer 2.1.1.64 / Windows Vista using the following steps:
1. Import template (xml) file using "Preferences > Database > SQL Formatter > Import..." option. Pressed "OK" button.
2. Clicked on "Preferences > Database > SQL Formatter > Oracle Formatting".
I expected to see the new profile under "Profile" drop-down-list-box, but it does not appear there.
I tried putting the template (xml) file under various locations, including:
(a) C:\Users\<user_name>\
(b) C:\Users\<user_name>\AppData\Roaming\SQL Developer\
Please let me know any suggestions that you may have.
Thanks in advance.I got it to work. In step 1 that I mentioned, "OK" button should not be pressed; go to step 2 without pressing "OK" button.
Maybe you are looking for
-
HP Officejet 4500 Wireless All-in-One Printer - G510n w/operating system Windows XP Professional I installed the printer in February and the disk did not finalize the setup process. I went online and down loaded the drivers and software that
-
I know what should I do?
-
Hi all, I have Instant client on a windows machine connecting via ODBC to my Linux machine with Oracle 10.2 on it. After days of pain, I finally bypassed the tnsnames.ora lookup and made a connection. The normal tnsnames.ora lookup never worked for m
-
Change Comment background color?
Is it possible to change the background of a comment? We have multiple people editing and commenting on a document and having different color comments for each user would make things much easier...
-
I use Lightroom 4 for organizing and processing my photo's on my Sony Vaio VPCF11C5E (Windows 7, 64bit). When I import (no presets applied) the jpg files of my canon 6d (camera setting sRGB) in Lightroom 4, the pictures are displayed differently (le