Language specific text in 0ANALYSIS_PATTERN after sp8

Hello SDN,
After the application of sp8, we encounter a problem when we execute queries directly from the query designer (using standard template 0ANALYSIS_PATTERN). The buttons on the second row (under the query name) have the following text:
'Taalspecifieke text bestaat niet: TYPE=REP KEY1=SAPLRRSV KEY2=757 LANG='
translated:
'Language specific text does not exist: TYPE=REP KEY1=SAPLRRSV KEY2=757 LANG='
The login is in Dutch. Before sp8 (with sp7), we didn't have a problem. I've alreade re-actived 0ANALYSIS_PATTERN from the business content, without results. Does anyone have a  solution for or experience the same problems?
Greetz,
Daniel

Ben,
Is it possible you did something else to solve this problem. We are still encountering it and SAP has been unable to identify any issues yet.
I have installed Front end path 801 and 802. And this problem is still occuring.
It doesnt seem to be front related though. I was just wondering if there is something you did as well that might have contributed to correcting this issue after installing SP8.
Thanks

Similar Messages

  • How do I surface language specific texts in Integrated ITS?

    Hello all,
    I'm new to both stand alone and integrated ITS and am researching the upgrade process. In our stand alone templates we used htrc files with our html templates to show language specific texts.
    Example.
    html template code for a field label
    `if (i==2) DETAIL-FLABEL[2]= #KAFN end`
    htrc name value pair
    z_pz01_en.htrc
    KAFN     Known As First Name
    z_pz01_de.htrc
    KAFN     Bekannt unter dem Vornamen
    I see no hint that htrc's can be used in integrated and am not seeing anything in the way of resource based language texts in integrated. I think I've hit every document out there yet, I have a feeling I'm missing something obvious. Your help is appreciated.
    Doug

    Edgar,
    Thanks so much for the detail!
    I have run through the steps for manual creation of translations as well as SIAC_UPLOAD of htrc files and have it working and documented. I will add a few more findings here for others who find this post later.
    Some of our old htrc files had duplicate keys (probably from original German version). In stand alone ITS the last key in the file was used so this didn't matter. In integrated ITS this matters for 2 reasons.
    1 Uploading/Converting htrc files having logged in in English will cause failures if any of the text being entered in the service parameters has characters that arent consistent with the codepage being used for EN. (Ex. back Azureück). Clean up htrc files to use only the language they should contain.
    2 Stand alone ITS was forgiving of htrc files containing duplicate keys. Integrated ITS is not. Remove all duplicate keys.
    3. This one is obvious but... if  parameters have already been entered in another language you may be prompted to confirm you are changing language and there are several prompts along the way. As these prompts will appear in the logon language itu2019s important to eitheru2026
    a. Be fluent in all supported languages , oru2026
    b. Memorize button and menu positions.
    I do have one additional question.
    Our old stand alone setup had an alternate corporate "APCI" design that we used...
    File system view -
    hostDEV_WWWmimesdesigns"apci"webgui as opposed to the out of box
    hostDEV_WWWmimesdesignssap_streamlinewebgui I suppose.
    I believe this was then referenced in the global services file ~DESIGN="APCI"
    I'm starting research to understand if there is an analog to this in the integrated webgui service or precisely what I have to do to accomplish alternate styles for webgui and our Z_services.
    Thanks again, points on the way, If I could award more I would.
    Doug

  • Create Language specific text for Service MAster

    Hi All,
    Can Someone help me to maintain language dependent text for Service Master. I need to maintain it for different languages.
    Regards,
    Smita

    Hi,
    I assume you want to create long text . Do you want to mass upload ? If yes, you can use OMQ3 for mass upload.
    File format below. The program documentation has more information.
    /HTEXT
    /:OBJECT ASMD
    /:NAME I.900412
    /:ID LTXT
    /:LANGUAGE I
    /:FORM SYSTEM
    /:STYLE SYSTEM
    /:FIRST-USER xxxxx
    /:FIRST-DATE 05 29 2010
    /:FIRST-TIME 8 30 0
    /:TITLE 'Long Text upload for Service master'
    /M
    Operaio  3°/2° livello in orario notturno del Sabato e giorni festivi dalle ore 22:00 alle ore 06:00
    Hope this helps.
    Cheers !

  • Language specific text extractions

    Hello experts,
    In a fresh BI system, if i have to extract data for 0customer_text for eg with language selection, what r the detailed steps for doing it?
    the datasrc does not have a langu field. i want to extract only german records in BI? how do i enable this?
    Similarly do i need to do this for all the other text datasrces which dont have langu field?
    the configurations are done on a system with English language logon but the data to be extracted is in German!!
    Detailed steps would be appreciated.
    thnk you

    Hi,
    0CUSTOMER is not language dependent; it has only one text valid for any language.
    In general, when your DSource doesn't have the language dependent field (SPRAS) your IObj texts will be language independent...
    Independently of the logon language, the customer texts will show up....
    hope this helps...
    Olivier.

  • Language specific text in forms

    hi,
    my reqirement is i ant to print text in main window in english from second line onwards i want to print text german language.how  we do this.if any body can help me

    Hi,
    Define a variable in the driver program and increment that variable in the loop which you  are printing the item data.
    in the main window write the code as folows.
    If &g_var& = 1.
      set language  'EN'
    Else.
    set language  'GE'
    ENDif.
    Thanks,
    NN.

  • Language specific pop up

    hi all,
    i am sorry as  i havnt tried enough to search the solution in forum .. but can anyone let me know how to create a language-specific pop-up  in BSP ?

    Hi Shal,
    you can use the Online Text Repository to support language specific text fields in BSP.
    Look here http://help.sap.com/saphelp_nw04/helpdata/en/93/bccd3a00746f4ae10000000a11402f/frameset.htm
    Cheers
    Graham Robbo

  • 508- Document Properties - Disabled ..."All of the text on this page lacks a language specification"

    Hi,
    When i try to do 508 check. I got the following error message
    "All of the text on this page lacks a language specification'
    I checked "FILE=>Document Properties". All "Document Properties" are disabled. 
    We are using Adobe LiveCycle Designer ES2 to create this dynamic for and save it as static PDF file.
    Still, we have same issue. I am not sure, how to change or setup the language in adobe livecycle designer es2.
    thank you,

    Ah, I don't know that. "Tables" is a collection, not a simple array, and some careless experimentation shows that you cannot simply use .concat to paste them together.
    I'm pretty sure I've seen a couple of workarounds for a situation like this. Perhaps it's time to read "[CS3][JS] everyItem() and getElements()" -- i.e. Marc Autret's blog posts about this, at the end of that thread.
    That is, if you stick to using everyItem()! Perhaps it's easier to build an array "the old fashioned way". This code is based on my earlier assumption you had textframes-in-textframes, but you can rewrite it to cater for groups as well:
    t = app.layoutWindows[0].activePage.textFrames.everyItem().tables;
    tableList = [];
    for (i=0; i<t.length; i++)
      tableList.push (t[i]);
    t = app.layoutWindows[0].activePage.textFrames.everyItem().textFrames.everyItem().tables;
    for (i=0; i<t.length; i++)
      tableList.push (t[i]);
    alert (tableList.length);

  • Search Help in Webdynpro displays specific text in German language

    We have created a custom search help which is being displayed using a custom Webdynpro application. We found that for this search help, although all other texts are displayed in English, a specific text ( 'Show filter criteria' ) is being displayed in German. Also, the same problem exists for search helps used in certain standard Webdynpro applications as well ( eg. WDT_FLIGHTLIST, TEST_DDIC ). Is there any SAP note to address this issue?

    Hi,
    see SAP note 1050954
    Regards, Heidi

  • Can I add specific text to Template via pop up text box on opening file?

    In most word processors it is possible to create a template that asks you for specific text when you open it, so that you can have the letter three quarters written within the template, and only need to replace names, addresses, date and so on.
    In Lotus WordPro for instance, before I even see the file, I have to fill in a dialogue box with the persons name, the subject of the letter, and four or five specifics unique to them. The WP then adds this info into the letter, and all I need do is to occasionally write a further full paragraph.
    How do I do this in Pages? I can't seem to find anyway to do it at all. I have a suspicion I might need Apple Script, but I'm not sure how I can do that. I have a book of how to code, but I don't know where to store the macro, nor to write it yet - the book's just there if I need it.
    I want to open the file, and then be asked one item at a time for the personalised answers to questions that occur in every report/letter.
    Any ideas?
    TIA
    Mac

    Thanks for your suggestions, Magnus, you really have had a good think for me - I appreciate that!
    What I am doing is report writing in which 90% of the report is the same for everyone. Except the cover page with Name and Address details, and Report title; the initial section which is the same for everyone except for specifics such as amount to invest, reason for investment, term to invest over, things like that.
    The end of the report is the recommendations section which is where I use freetext to create a bespoke solution - this cannot be automated.
    Just automating the cover page and the intro section save me huge amounts of time which I can then use on research and fund analysis, leaving the principles of investment section pretty much the same for everyone, as here I'm describing the principle and theory.
    After I created this Report Template my average report creation time went down from about 3 to 4 hours, to about 45 minutes. I guess the automation itself doesn't save as much time as the templating does, but it allows me to concentrate on the important bit and not worry if I have left something out - or in - that changes the overall thrust of the report.
    I cannot load Lotus WorpPro on Parallels, nor on Virtual PC, so the lack of automation really is a pain here. I see it as a weakness of Apple products for business, as I am sure Microsoft do which is why they have dropped VBA support for Office 2008.
    I have got NeoOffice as well as OpenOffice for Mac on my system, but really they aren't atable enough to use, and the formatting is pretty flaky. It certainly isn't completely consistent with Office itself.
    So, I am left with the conclusion that progress only means a reduction in features!
    But maybe I'm missing something?
    Mac

  • Use smart mailbox to find email with specific text in attached pdf

    Does anyone known if a smart mailbox can be created to find emails with specific text within a pdf attached document. I know that spotlight can do this and it works fine but it would suite me better to be able to do this in mail.

    After some digging, I found that Spotlight returns the pdf attachment (found within the library/mail/download folder), but not the actual email. The only time it returns the email is if the search text or numerics are coincidentally within the written contents or subject line.
    Yes, i have tried setting up smart mailbox search criteria using the entire message contents but this does not find emails where the text exist within the pdf.
    I've checked spotlight pref.'s and all categories are checked off.
    Essentally, i need the smartbox search criteria to return results where the search text is found within the pdf attachment if possible. If this is not possible, i'll continue using spotlight searches outside of mail.
    I appreciate any help you can offer.

  • In system preferences - languages and text - the formatting of numbers does not respond, In system preferences - languages and text - the formatting of numbers does not respond

    When in system preferences, under languages and text, and within it in regions, there is a place where you can format numbers - or currencies by indicating that you want a dot in decimals and comma in thousands, for instance.  This is in order to format numbers in calculating sheets, either in numbers of excell.
    Since I have moved to Mountain Lion, this does not work.  However, with an apple advisor, we were able to determine that it is not a global problem, it seems to be a problem in my computer.  We found this out when we created a new administrator user as a test, and the formatting mentioned above works like a charm.
    Then we tried separating all my preferencies into a untitled folder restarted and got a set of new prefernces for my own user, and the formatting required did not work.
    Now I am - as you can see - quite stumped, the advisor told me it might be in the home folder, but I lost touch with him, and I am hoping that I can find SOMEONE that can help me with this issue.
    Thank you

    Hi there!  Just reading that paragraph I hurt all over
    But I got it solved and I would like to share it with you.  I actually called Apple and they created a user roots, and from the library in the HD replaced the preferences.  After that it worked like a charm.... But that is not all, then excel did not work, even if preferences did, so I went and uninstalled microsoft office, and reinstalled so that was that...
    I use safari... I love it, but thanks for all your offers.  If I even do need something, I will let you know. and PLEASE let me know if what I wrote above makes sense.... but it works
    Take care

  • Check if a cell contains specific text

    I am trying to do a check to see if a cell contains specific text (but may also include other text). I thought this might be accomplished with an 'if' statement. Is this possible in Numbers?

    I am assuming the word "carrot" can appear multiple times within the same cell so the COUNTIF function will not work for this case.
    Set up an auxiliary (second) table that is the same size as your "matrix". Each cell in this new table corresponds to a cell in your "matrix". Each of these cells will count how many times "carrot" appears in the corresponding cell of the "matrix". The formula below will count how many times the letters "carrot" appear in that exact order in a cell. In other words, "carrotstick" is also included in the count. Capitalization is not a factor. It assumes your "matrix" top left corner is cell B2 of Table 1.
    Table 2 cell B2=(LEN(UPPER(Table 1 :: B2))-LEN(SUBSTITUTE(UPPER(Table 1 :: B2),UPPER($A$1),"")))/LEN($A$1)
    Copy or fill that formula to the rest of the cells.
    Table 2 cell A1 = carrot (the word you are looking for)
    Somewhere else have a cell that sums the cells in Table 2.
    The formula works by removing all instances of the word "carrot" from the string then subtracting the length of the new string from the length of the original and dividing that by the length of the word "carrot". The result is the number of times "carrot" appears in that particular string.
    You could put a space before and/or after "carrot" in cell A1 to avoid counting words such as "carrotstick" but if "carrot" is the first and/or last word of the string, it will not get counted because that space will not be there in the string.
    Message was edited by: Badunit

  • HR-ABAP Language specific

    Hi Experts,
    I have created a custom infotype. Now I need to make it language specific as such, If logged in French language the lables and error messages should be in french and I created with English and should be applicable for both French and English as well.
    Regards,
    Srik

    Hi,
    The blank screen is ok...
    Now use the menu (example) -> Translation -> Short texts -> Screen painter -> Screen painter texts
    Enter the programname (should be something like MP999900 and the screen number) and translate the texts.
    Do this for all the objects you need translated.
    Regards

  • Language Specific query

    Hi Experts,
    I extended (Project LOV)VO extension as per client requirement. But after done, when I click on Project LOV  , the 'Project Name' display data in different language. But its previously showing English language. For this purpose I have to do changes anywhere or any specific settings. Can anyone please suggest me. Your helps valuable.
    Thanks,
    Prasad

    Hi Prasad ,
    I honesty have no idea  why did it display result in different language after the VO substitution ,but let's investigate . Could you check this and confim running your query from database .
    By any change have used any where condition using ICX language specific in your extended VO query .
    Regards ,
    Keerthi

  • Language specific characters changes when .irpt executed.

    Hi,
    When i execute .irtp page, language specific characters changes to strange signs.
    How can it be solved?
    Thanks.

    Hi Jeremy,
    Below is meta tags for Turkish
    lt & meta http-equiv="Content-Type" content="text/html; charset=windows-1254" / & gt
    lt & meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-9"  / & gt
    lt & meta http-equiv="Content-Language" content="tr" / & gt
    I tryed but result is the same.
    I think .irpt has no Turkish support.
    Thanks.

Maybe you are looking for