Languages and Presenter
Hi,
I understand that Presenter has a Multilingual support
function, I would like to know if this also changes any audio that
is in the powerpoint presentation or is it only the text on the
viewer?
I am fairly new to this and am doing a project where I need
to put the whole document into another language. Please can anyone
tell me how I would go about this other than writing the text and
getting the audios recorded in the relevant languages?
Thanks in advance
cazwalks
The player skin carries text for: German, English, French, Spanish (Spain), Itialian, Dutch, Chinese (simplified), Japaniese, Korean, Poruguese (Brazil), Russian and Turkish. These text lables will display based on the OS language setting of the viewer. You could modify any of these text lables to be in any other language, and, if you are adept enough, could possibly modify the file that holds the text lables and the XML that calls to it to have additional text.
However, for the content of your PPT and the audio associated with it, you would need to have someone or something do that conversion for you. Traditionally called globalization, there are a number of groups that do it out there. Feel free to PM me if you want info on the group we use.
Similar Messages
-
Changing the Keyword Language in Presentation Services
Hi All,
I am trying to change the language in Presentation Services. Everything works well except 3 things. The Keywords *'Dashboard', 'Answers'* and *'Oracle Business Intelligence Applications'* does not gets changed.
Please let me know how to achieve this.
Regards
JaanHi,
Refer below :
http://gerardnico.com/wiki/dat/obiee/webcat_translation?s[]=dat&s[]=obiee&s[]=localization&s[]=webcat
see this below link for multi language support
http://blog.trivadis.com/blogs/andreasnobbmann/archive/2008/09/22/multilanguage-support-in-use-variables-over-variables.aspx
multi-language OBIEE??
Thanks
Deva -
How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ -
i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help
Connect it to your computer via the supplied sync cable and restore.
-
Report in new page does not know of session and presentation variables
I have a question about GOURL.
I am using GOURL as a column function in one report (report A), so that when i click on that column it takes me to another report(report B) that open in new popup window.
the first report (A) also uses some session and presentation variables, which is also used by Report B as filters. I am curious that if I add these filters which are using variables to report B, why can't report B get the value of these, (it just errors out ) because it didn't found any value to those variables in the filter.
Becuase I am ending up with passing all these variables in GOURL and setting them as 'isprompted'.
Does this report (B) knows nothing else than what it finds in GOURL?
thanksIn a nutshell, if u use gourl then its parameters will be only using in navigated report. This is functionality
-
Retrieving data from an ArrayList and presenting them in a JSP
Dear Fellow Java Developers:
I am developing a catalogue site that would give the user the option of viewing items on a JSP page. The thing is, a user may request to view a certain item of which there are several varieties, for example "shirts". There may be 20 different varieties, and the catalogue page would present the 20 different shirts on the page. However, I want to give the user the option of either viewing all the shirts on a single page, or view a certain number at a time, and view the other shirts on a second or third JSP page.
See the following link as an example:
http://www.eddiebauer.com/eb/cat_default.asp?nv=2|21472|9&tid=&c=&sc=&cm_cg=&lp=n2f
I am able to retrieve the data from the database, and present all of them on a JSP, however I am not sure how to implement the functionality so that they can be viewed a certain number at a time. So if I want to present say 12 items on a page and the database resultset brings back 30 items, I should be able to present the first 12 items on page1, the next 12 items on page2, and the remaining 6 items on page3. How would I do this? Below is my scriplet code that I use to retrieve information from the ArrayList that I retrieve from my database and present them in their entirety on a single JSP page:
<table>
<tr>
<%String product=request.getParameter("item");
ArrayList list=aBean.getCatalogueData(product);
int j=0, n=2;
for(Iterator i=list.iterator(); i.hasNext(); j++){
if(j>n){
out.print("</tr><tr>");
j=0;
Integer id=(Integer)i.next();
String name=(String)i.next();
String productURL=(String)i.next();
out.print("a bunch of html with the above variables embedded inside")
%>
</tr>
</table>
where aBean is an instace of a JavaBean that retrieves the data from the Database.
I have two ideas, because each iteration of the for loop represents one row from the database, I was thinking of introducing another int variable k that would be used to count all the iterations in the for loop, thus knowing the exact number. Once we had that value, we would then be able to determine if it was greater than or less than or equal to the maximum number of items we wanted to present on the JSP page( in this case 12). Once we had that value would then pass that value along to the next page and the for loop in each subsequent JSP page would continue from where the previous JSP page left off. The other option, would be to create a new ArrayList for each JSP page, where each JSP page would have an ArrayList that held all the items that it would present and that was it. Which approach is best? And more importantly, how would I implement it?
Just wondering.
Thanks in advance to all that reply.
Sincerely;
Fayyaz-You said to pass two parameters in the request,
"start", and "count". The initial values for "start"
would be zero, and the inital value for "count" would
be the number of rows in the resultSet from the
database, correct?Correct.
-I am a little fuzzy about the following block of code
you gave:
//Set start and count for next page
start += count; // If less than count left in array, send the number left to next next page
count = ((start*3)+(count*3) < list.size()) ? (count) : ((list.size() - (start*3))/3)
Could you explain the above block of code a little
further please?Okay, first, I was using the ternary operators (boolean) ? val_if_true : val_if_false;
This works like an if() else ; statement, where the expression before the ? represents the condition of the if statement, the result of the expression directly after the ? is returned if the condition is true, and the expression after the : is returned if the condition is false. These two statments below, one using the ternary ? : operators, and the other an if/else, do the same thing:
count = ((start*3)+(count*3) < list.size()) ? (count) : ((list.size() - (start*3))/3);
if ((start*3)+(count*3) < list.size()) count = count;
else count = ((list.size() - (start*3))/3);Now, why all the multiplying by 3s? Because you store three values in your list for each product, 1) the product ID, 2) the product Name, and 3) the product URL. So to look at the third item, we need to be looking at the 9th,10th, and 11th values in the list.
So I want to avoid an ArrayIndexOutOfBounds error from occuring if I try to access the List by an index greater than the size of the list. Since I am working with product numbers, and not the number of items stored in the list, I need to multiply by three, both the start and count, to make sure their sum does not exceed the value stored in the list. I test this with ((start*3)+(count*3) < list.size()) ?. It could have been done like: ((start + count) * 3 < list.size()) ?.
So if this is true, the next page can begin looking through the list at the correct start position and find the number of items we want to display without overstepping the end of the list. So we can leave count the way it is.
If this is false, then we want to change count so we will only traverse the number of products that are left in the list. To do this, we subtract where the next page is going to start looking in the list (start*3) from the total size of the list, and devide that by 3, to get the number of products left (which will be less then count. To do this, I used: ((list.size() - (start*3))/3), but I could have used: ((list.size()/3) - start).
Does this explain it enough? I don't think I used the best math in the original post, and the line might be better written as:
count = ((size + count)*3 < list.size()) ? (count) : ((list.size()/3) - start);All this math would be unnecessary if you made a ProductBean that stored the three values in it.
>
- You have the following code snippet:
//Get the string to display this same JSP, but with new start and count
String nextDisplayURL = encodeRedirectURL("thispage.jsp?start=" + start + "&count=" + count + "&item=" + product);
%>
<a href="<%=nextDisplayURL%>">Next Page</a>
How would you do a previous page URL? Also, I need to
place the "previous", "next" and the different page
number values at the top of the JSP page, as in the
following url:
http://www.eddiebauer.com/eb/cat_default.asp?nv=2|21472
9&tid=&c=&sc=&cm_cg=&lp=n2f
How do I do this? I figure this might be a problem
since I am processing the code in the middle of the
page, and then I need to have these variables right at
the top. Any suggestions?One way is to make new variable names, 'nextStart', 'previousStart', 'nextCount', 'previousCount'.
Calculate these at the top, based on start and count, but leave the ints you use for start and count unchanged. You may want to store the count in the session rather than pass it along, if this is the case. Then you just worry about the start, or page number (start would be (page number - 1) * count. This would be better because the count for the last page will be less than the count on other pages, If we put the count in session we will remember that for previous pages...
I think with the details I provided in this and previous post, you should be able to write the necessary code.
>
Thanks once again for all of your help, I really do
appreciate the time and effort.
Take care.
Sincerely;
Fayyaz -
I've changed my keyboard language to a forieng language and when MacBook sleep I could not type the actual password in US language.. Try alot but no language change key
What language did you change it to exactly?
-
How to restore the languages in the input sources under 'Language and Text'
Dear all,
Recently, I am trying to free up my disk space on my macbook and I downloaded this software call Monolingual. Basically, it removes languages that you do not use to free up the disk space.
However, I accidentally remove the language that I use which is Japanese and now it seems like I cannot find it anywhere under the input sources of language and text.
Does anybody know how I can restore everything back to normal?
Thanks in advance.
Cheers,
AlfredI think you will have to reinstall your OS. If you are running Yosemite, see
OS X Yosemite: Reinstall OS X
Best to avoid Monolingual and simlar "cleaning" utilties if possible, it is too easy to make mistakes that destroy parts of you system.
Your problem has nothing to do with your hardware, so in the futue it would be best to use the software forums for similar questions:
Mac OS & System Software -
Bought the iphone 5 today, and when i turned it on it made me set up the language and my origin of country. Then it made me set up wi fi settings but my wi fi settings are messed up! Now i can't proceed to press next! Please help!!
No
It says ' Your ipj
your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes to activate it, or try again over the cellular connection in a couple of minutes. You can also try to activate using a Wi-Fi connection.'
HELP:( -
I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??
Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions. -
the background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black background please help!
or maybe the interface has been set to Dark?
Go to Preferences > Interface tab, choose Light from Color Theme dropdown on Apearance section (upper part of the window) -
Just purchased new ipad. screen in foreign language and says "Dang dat Ngon ngu? What's going on??
The easiest AND quickest way would be to reset the iPad and start over.
Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. -
I accidently changed my language and I can't get it back to English!
Please help!
''david.abel wrote:''
On the Firefox home page, the Arabic language has suddenly started to appear
Is the language for the menus and other user interface elements still English? If so,
# Click the ≡ Menu Button and choose Preferences.
# Click the Content icon.
# Below Languages, click the Choose button.
# Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
[[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
''david.abel wrote:''
Also, my browser history has started to take up part of the screen.
I don't know what you mean by that. Please attach a screenshot.
* [[How do I create a screenshot of my problem?]] -
Hello, I'm a french Photoshop CC user. My one is in english language, and I would like to work with french language. How can I do to have french language ?
In the CC Desktop app, click the gear > Preferences > App tab > choose Application Language, then install Photoshop CC
Once the install finishes, Photoshop Preferences > Interface > UI Language, change to French, Restart Photoshop. -
Wait XML File Generation and Present in APEX
Hi All,
I need advice on how can I implement following -
I will be creating Input XML file using database procedure called from APEX, which will then go and executed the call using web services and create output XML file in one of the output directory. What I need help is -
1. Once execute the initial call, then I need to be keep looking for file under output directory. Once the file is generated then I can show it on APEX, but I would like to know how can I implement, so continuously watch the directory for the file and as soon as file generated pick that file and present on APEX and stop watching directory for file.
2. Also APEX will be used by many users concurrently, so how can I create and direct unique file for their own sessions, so myfile should not go to another user?
Please adviceThere are lots of thread on ingesting XML and generating XML in this forum. Have a read through some of them and you should get some ideas on where to start. In particular look for threads on rcreating elational views of XML documents and using the SQL/XML Operators
Maybe you are looking for
-
Using acrobat on multiple devices?
I pay the monthy fee acrobat and want to use this software on my desktop and iphone, not just my laptop. Ive tried downloading on my desktop and have been unsuccessful. Can you use on multiple devices when paying for this service?
-
Umm... don't know what more details you would want, thats pretty clear I think.
-
Hi Experts, Good day! i ineserted the query in report designer and would like to the execute the report i am following these steps.iam executing the after the dataprovider option in menu bar in report designer is it correct or i need to go for portal
-
Hi All I have a .jar file.Now i want to create .exe.How can i make it. Plz Help me
-
How can I set defaults for credential manager? I keep having to close a dialogue box prompting me for my credentials for untrusted sites, when I don't have passwords for these sites. I click 'close' and it disappears, but it slows things down.